Pool boiling on polished and chemically etched stainless-steel surfaces.
Pool boiling data at atmospheric pressure for mechanically polished and chemically etched 304 stainless steel surfaces in contact with distilled water
Davis, D. L.↗
SEARCH · Engineering Papers
Results for “Distillation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Laser action from a terbium beta-ketoenolate at room temperature
Laser activity is achieved in a solution of terbium tris at room temperature in a liquid solvent of acetonitrile or p-dioxane. After precipitation, the microcrystals of hydrated tris chelate are filtered, washed in distilled water, and dried. They show no signs of deterioration after storage.
Bjorklund, S.↗
Low temperature vapor phase catalytic oxidation unit
Low temperature vapor phase catalytic oxidation unit for removing organics in urine distillation
Alper, R. H.↗
Forced convection boiling near inception in zero-gravity
Forced-convection boiling at low heat flux and flow velocities in zero gravity for slightly subcooled distilled water
Cochran, T. H.↗
Etching of metallographic specimens by cavitation
Vibratory cavitation for metal and superalloy etching in distilled water
Young, S. G.↗
Devolatilization of polymer resins
Commercial silicon resin was devolatilized by vacuum distillation, cured at room temperature and tested favorably for outgassing criteria. Applications of the devolatilized resin are potting compounds and conformal coatings.
Seidenberg, B.↗
Improved method for reclaiming vacuum diffusion pump oil
High vacuum centrifugal molecular distillation system rapidly reclaims contaminated diffusion pump oil in continuous operation and restores it to high level of purity.
Buggele, A. E.↗
The influence of temperature on fatigue-crack growth in a mill annealed Ti-6Al-4V alloy
To understand the influence temperature on the rate of fatigue crack growth in high strength metal alloys, constant load amplitude, fatigue crack growth experiments were carried out using a 1/4-inch-thick (6.35 mm) mill annealed Ti-6Al-4V alloy plate as a model material. The rates of fatigue crack growth were determined as a function of temperature, ranging from room temperature to about 290 C (or, about 550 F/563K) and as a function of the crack tip stress intensity factor in a dehumidified high purity argon environment. Limited correlative experiments indicate that dehumidified oxygen and hydrogen have no effect on the rate of fatigue crack growth in this alloy, while distilled water increased the rate of crack growth slightly in the range tested. Companion fractographic examinations suggest that the mechanisms for fatigue crack growth in the various environments are essentially the same.
Wei, R. P.↗
Fractographic observations of Ti-6Al-4V alloy fatigued in vacuum.
These observations were made as part of a study of the influence of temperature and chemical environment on fatigue-crack growth. The results obtained, along with additional fractographic results in other environments, suggest that the mechanism for fatigue-crack growth in the Ti-6Al-4V alloy is basically similar (striations are observed) for a wide range of environments. In addition to ?vacuum,' these environments include distilled water, ?dry' and ?wet' air, ?dry' hydrogen, and ?dry' and ?wet' argon.
Ritter, D. L.↗
Amino-acid contamination of aqueous hydrochloric acid.
Considerable amino-acid contamination in commercially available analytical grade hydrochloric acid (37% HCl) was found. One bottle contained 8,300 nmol of amino-acids per liter. A bottle from another supplier contained 6,700 nmol per liter. The contaminants were mostly protein amino-acids and several unknowns. Data on the volatility of the amino-acids during HCl distillation were also obtained.
Wolman, Y.↗
The influence of temperature on fatigue crack growth in a mill annealed Ti-6Al-4V alloy.
To study the influence of temperature on the rate of fatigue crack growth in high strength metal alloys, constant load amplitude fatigue crack growth experiments were carried out using a .25-in.-thick mill annealed Ti-6Al-4V alloy plate. The rates of fatigue crack growth were determined as a function of temperature, ranging from room temperature to about 290 C, and as a function of the crack tip stress intensity factor in a dehumidified high purity argon environment. Limited correlative experiments were carried out in distilled water, dehumidified oxygen and hydrogen, and in vacuum. The results indicate that the rate of fatigue crack growth is essentially independent of test temperature in this alloy, and is affected by residual moisture in very small concentrations. Companion fractographic examinations suggest that the mechanims for fatigue crack growth in the various environments are essentially the same.
Wei, R. P.↗
Effective separation technique for small diameter whiskers.
Description of a technique for separating small-diameter whiskers from the as-grown matt by gently agitating the whisker matts in a solution of deionized or distilled water for six to eight hours. High-strength Al2O3 whiskers were effectively separated by this technique, comprising an average 48% of the original weight of the whisker matt. According to estimation, more than 90% of separated whiskers had diameters between 0.7 and 2.0 microns.
Westfall, L. J.↗
Domestic applications for aerospace waste and water management technologies
Some of the aerospace developments in solid waste disposal and water purification, which are applicable to specific domestic problems are explored. Also provided is an overview of the management techniques used in defining the need, in utilizing the available tools, and in synthesizing a solution. Specifically, several water recovery processes will be compared for domestic applicability. Examples are filtration, distillation, catalytic oxidation, reverse osmosis, and electrodialysis. Solid disposal methods will be discussed, including chemical treatment, drying, incineration, and wet oxidation. The latest developments in reducing household water requirements and some concepts for reusing water will be outlined.
Disanto, F.↗
Solar energy, its conversion and utilization
The work being carried out at the University of Florida Solar Energy and Energy Conversion Laboratory in converting solar energy, our only income, into other needed and useful forms of energy is described. A treatment such as this demonstrates, in proper perspective, how solar energy can benefit mankind with its many problems of shortages and pollution. Descriptions were given of the conversion processes, equipment, and performance. The testing of materials, solar water heating, space heating, cooking and baking, solar distillation, refrigeration and air-conditioning, work with the solar furnace, conversion to mechanical power, hot air engines, solar-heated sewage digestion, conversion to electricity, and other devices will be discussed.
Farber, E. A.↗
Upgrading and extended testing of the MSC integrated water and waste management hardware
The results are presented of upgrading and testing an integrated water and waste management system, which uses the compression distillation, reverse osmosis, adsorption filtration and ion-exchange processes to recover potable water from urine, flush water and used wash water. Also included is the development of techniques for extending the useful biological life of biological filters, activated carbon filters and ion-exchange resins to at least 30 days, and presterilizing ion-exchange resins so that sterile water can be recovered from waste water. A wide variety of reverse osmosos materials, surfactants and germicides were experimentally evaluated to determine the best combination for a wash water subsystem. Full-scale module tests with real wash water demonstrated that surface fouling is a major problem.
Bambenek, R. A.↗
Quantitative observations of hydrogen-induced, slow crack growth in a low alloy steel
Hydrogen-induced slow crack growth, da/dt, was studied in AISI-SAE 4130 low alloy steel in gaseous hydrogen and distilled water environments as a function of applied stress intensity, K, at various temperatures, hydrogen pressures, and alloy strength levels. At low values of K, da/dt was found to exhibit a strong exponential K dependence (Stage 1 growth) in both hydrogen and water. At intermediate values of K, da/dt exhibited a small but finite K dependence (Stage 2), with the Stage 2 slope being greater in hydrogen than in water. In hydrogen, at a constant K, (da/dt) sub 2 varied inversely with alloy strength level and varied essentially in the same complex manner with temperature and hydrogen pressure as noted previously. The results of this study provide support for most of the qualitative predictions of the lattice decohesion theory as recently modified by Oriani. The lack of quantitative agreement between data and theory and the inability of theory to explain the observed pressure dependence of slow crack growth are mentioned and possible rationalizations to account for these differences are presented.
Nelson, H. G.↗
Techniques for lithium removal from 1040 C aged tantalum alloy, T-111
The liquid ammonia and vacuum distillation techniques were found to be satisfactory for removing lithium from 1040 C aged T-111 (tantalum - 8-percent tungsten- 2-percent hafnium). Results of ductility tests and chemical analysis show that these two methods are adequate for removing lithium without embrittlement or contamination of the T-111. Moist air exposure of T-111 with traces of lithium on the surface produced mixed results. Some specimens were ductile; others were brittle. Brittle T-111 had an increased hydrogen content. Water removal of lithium from T-111 caused brittleness and an increased hydrogen concentration.
Gahn, R. F.↗
Space simulation ultimate pressure lowered two decades by removal of diffusion pump oil contaminants during operation
The complex problem why large space simulation chambers do not realize the true ultimate vacuum was investigated. Some contaminating factors affecting diffusion pump performance have been identified and some advances in vacuum/distillation/fractionation technology have been achieved which resulted in a two decade or more lower ultimate pressure. Data are presented to show the overall or individual contaminating effect of commonly used phthalate ester plasticizers of 390 to 530 molecular weight on diffusion pump performance. Methods for removing contaminants from diffusion pump silicone oil during operation and reclaiming contaminated oil by high vacuum molecular distillation are described.
Buggele, A. E.↗