Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dielectric materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Ceramic Heat Pipe for Thermal Management of a High Frequency Inductor

As the power density of electric machines and power electronics continues to increase to meet the demands of more electric aircraft, the thermal management of these devices becomes increasingly important. Ideally, the thermal management solution of the device should have high thermal conductivity and be electrically insulating so that it can be directly integrated with the device in question. Technical ceramics are a class of materials that meet these two requirements. Direct liquid cooling by submerging electric components in a dielectric fluid is an alternate option, but adds system complexity and may incur pumping loss. In this work, the thermal management solution for a high frequency inductor is presented. A conventional wicked heat pipe is designed that is made from a solid ceramic case with a sintered ceramic wick. This heat pipe can provide structural support for the core and windings and is electrically insulating, so it does not incur any additional eddy current losses from the high frequency magnetic fields. It does not require additional pumping power, because conventional wicked heat pipes are passive devices. In this paper, the manufacturing process of the ceramic heat pipe is also presented. It is shown that the sintering of large diameter spherical ceramic particles is difficult due to their high specific surface area and low surface free energy. To overcome this difficulty, a flux material was used to initiate liquid phase sintering. The results of the sintering trials show that for the 120 μm diameter α-Al2O3powder selected for the wick, the combination of 1650°C sintering temperature and the addition of 5 wt% talc sintered the porous matrix together sufficiently for use as a heat pipe wic

High-frequency Inductor↗
NASA NTRSDate not supplied

Ceramic Heat Pipe for Thermal Management of a High Frequency Inductor

As the power density of electric machines and power electronics continues to increase to meet the demands of more electric aircraft, the thermal management of these devices becomes increasingly important. Ideally, the thermal management solution of the device should have high thermal conductivity and be electrically insulating so that it can be directly integrated with the device in question. Technical ceramics are a class of materials that meet these two requirements. Direct liquid cooling by submerging electric components in a dielectric fluid is an alternate option, but adds system complexity and may incur pumping loss. In this work, the thermal management solution for a high frequency inductor is presented. A conventional wicked heat pipe is designed that is made from a solid ceramic case with a sintered ceramic wick. This heat pipe can provide structural support for the core and windings and is electrically insulating, so it does not incur any additional eddy current losses from the high frequency magnetic fields. It does not require additional pumping power, because conventional wicked heat pipes are passive devices. In this paper, the manufacturing process of the ceramic heat pipe is also presented. It is shown that the sintering of large diameter spherical ceramic particles is difficult due to their high specific surface area and low surface free energy. To overcome this difficulty, a flux material was used to initiate liquid phase sintering. The results of the sintering trials show that for the 120 μm diameter α-Al2O3 powder selected for the wick, the combination of 1650°C sintering temperature and the addition of 5 wt% talc sintered the porous matrix together sufficiently for use as a heat pipe wick.

High frequency inductor↗
DOE OSTI2022

Vacancy-Driven Disorder and Elevated Dielectric Response in the Pyrochlore Pb 1.5 Nb 2 O 6.5

Lone pair-driven distortions are a hallmark of many technologically important lead (Pb)-based materials. Here, the role of Pb 2+ in polar perovskites is well understood and easily manipulated for applications in piezo- and ferroelectricity, but the control of ordered lone pair behavior in Pb-based pyrochlores is less clear. Crystallographically and geometrically more complex than the perovskite structure, the pyrochlore structure is prone to geometric frustration of local dipoles due to a triangular arrangement of cations on a diamond lattice. The role of vacancies on the O' site of the pyrochlore network has been implicated as an important driver for the expression and correlation of stereochemically active lone pairs in pyrochlores such as Pb 2 Ru 2 O 6.5 and Pb 2 Sn 2 O 6 . In this work we report on the structural, dielectric, and heat capacity behavior of the cation- and anion-deficient pyrochlore Pb 1.5 Nb 2 O 6.5 upon cooling. We find that local distortions are present at all temperatures that can be described by cristobalite-type cation ordering, and this ordering persists to longer length scales upon cooling. From a crystallographic perspective, the material remains disordered and does not undergo an observable phase transition. In combination with density function calculations, we propose that the stereochemical activity of the Pb 2+ lone pairs is driven by proximity to O' vacancies, and the crystallographic site disorder of the O' vacancies prohibits long range correlation of lone pair-driven distortions. This in turn prevents a low-temperature phase transition and results in an elevated dielectric permittivity across a broad temperature range.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tip-based proximity ferroelectric switching and piezoelectric response in wurtzite multilayers

Proximity ferroelectricity is a paradigm for inducing ferroelectricity when a nonferroelectric polar material (such as Al⁢ N), which is unswitchable with an external field below the dielectric breakdown field, becomes a practically switchable ferroelectric in direct contact with a thin switchable ferroelectric layer (such as Al 1−𝑥 ⁢Sc 𝑥 ⁢N). Here, we develop a Landau-Ginzburg-Devonshire approach to study the proximity effect of local piezoelectric response and polarization reversal in wurtzite ferroelectric multilayers under a sharp electrically biased tip. Using finite-element modeling, we analyze the probe-induced nucleation of nanodomains, the features of local polarization hysteresis loops and coercive fields in the Al 1−𝑥 ⁢Sc 𝑥 ⁢N/Al⁢ N bilayers and three-layers. Similar to the wurtzite multilayers sandwiched between two parallel electrodes, the regimes of “proximity switching” (when all layers collectively switch) and the regime of “proximity suppression” (when they collectively do not switch) are the only two possible regimes in the probe-electrode geometry. However, the parameters and asymmetry of the local piezoresponse and polarization hysteresis loops depend significantly on the sequence of the layers with respect to the probe. The physical mechanism of proximity ferroelectricity in the local probe geometry is a depolarizing electric field determined by the polarization of the layers and their relative thickness. The field, whose direction is opposite to the polarization vector in the layer(s) with the larger spontaneous polarization (such as Al⁢ N), renormalizes the double-well ferroelectric potential to lower the steepness of the switching barrier in the “otherwise unswitchable” polar layers. Tip-based control of domains in otherwise nonferroelectric layers using proximity ferroelectricity can provide nanoscale control of domain reversal in memory, actuation, sensing, and optical applications. The ability of the tip-induced proximity switching to differentially switch multilayers, based on the order of the layers, provides a powerful tool for selective domain engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Imaging Valley Excitons in a 2D Semiconductor with Scanning Tunneling Microscope-Induced Luminescence

Valley excitons dominate the optoelectronic response of transition-metal dichalcogenides and are drastically affected by structural and environmental inhomogeneities localized in these materials. Critical to understanding and controlling these nanoscale excitonic changes is the ability to correlate the imaging of excitonic states with crystalline structures on the atomic scale. Here, in this study, we apply scanning tunneling microscope-induced luminescence microscopy to image valley excitons in a semiconducting transition-metal dichalcogenide monolayer decoupled by a 10 nanometer-thick hexagonal-boron-nitride flake incorporated in a lateral homojunction on an Au electrode surface. This design enables the observation of chiral excitonic emission arising from neutral and charged valley excitons of the monolayer semiconductor at ambipolar voltages with a quantum efficiency up to similar to ~10 -5 photon/electron. The measured light helicity demonstrates considerable circular polarization dependent on the sample voltage, reaching as much as 40%. The real-space luminescence imaging maps$-$at subnanometer resolution$-$of the valley excitons reveal striking spatial variations associated with localized inhomogeneities, including surface impurities and possibly nanoscale dielectric and/or potential disorders in the monolayer. Our study introduces a promising format for 2D materials to explore and tailor their optoelectronic processes at the atomic scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Beryllium Oxide (BeO) Handbook

Beryllium oxide (BeO) is an oxide ceramic material. BeO ceramics provide thermal conductivity second only to diamond among electrically insulating materials, dissipating nearly 300 W/mK at room temperature. This property leads to electronic applications for BeO. BeO has a thermal expansion coefficient intermediate between gallium arsenide and refractory metal composites. Its low dielectric constant (6.7) and low loss index (0.0012 at 1 MHz) permits electrical circuit performance at high frequencies. It is employed as a window material for high frequency microwave applications. BeO is very stable under oxidizing and reducing high temperature and high humidity environments, unlike nitrides which will decompose to their oxide equivalent. Similar to beryllium metal, BeO acts as a scatterer of neutrons and is used as a neutron moderator material in nuclear reactor applications. The largest use of BeO is as the raw material for the manufacture of beryllium-copper alloys, followed closely as the raw material for conversion to beryllium metal. Most of the research performed on BeO was conducted in the 1960’s and 1970’s. 75% of the references cited in this Handbook are from the time period 1960-1980. Up to 1995, there were three commercial sources of BeO: Materion Corporation, Eagle-Picher, and Ceradyne Corporation. However, since 1995 Eagle-Picher and Ceradyne no longer supply BeO commercial products. Thus, the only current commercial source of BeO materials is Materion Corporation.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Transient response of Ge:Be and Ge:Zn FIR photoconductors under low background photon flux conditions

An experimental study of the transient behavior of Ge:Be and Ge:Zn photoconductors to changes in photon flux rates has been performed under the low background flux conditions (10 to the 8th photon/s) typical of astronomy and astrophysics applications. A characteristic transient behavior with time constants ranging from 0.1 to greater than 5 s has been observed in both materials when the shallow levels are very closely compensated. The detector response consists of both a fast and a slow component. The amplitude of the slow component can be up to 10 times greater than the initial fast component. It has been established that this phenomenon cannot be explained by current models of carrier sweep-out or dielectric relaxation. The transient behavior has been characterized as a function of temperature, electric field, photoconductive gain and material parameters.

Haegel, N. M.↗
NASA NTRS1985

Water permeation and dielectric breakdown. Water permeability in Pub Tedlar. Pub/Tedlar as a function of temperature and humidity

Moisture transport and dielectric breakdown of polyvinyl butyral (PVB), Tedlar, and PVB/Tedlar composites were addressed. Data for the temperature range between 20 and 80 C showed that the moisture flux through the composite is governed by the slower material; and that the composite permeability is intermediate to those of the component material, as predicted by theory. Data for Tedlar at 71 C, showing the dependence of moisture flux on relative humidity, was also presented. Dielectric breakdown data were less precise and less conclusive. The generally applied theoretical model does not match the experimental data. The PVB/Tedlar composite exhibited greater voltage breakdown resistance than either component. Testing of EVA and EVA/Tedlar composites is underway.

Orehotsky, J.↗
DOE OSTI2025

Twist Engineering of Anisotropic Excitonic and Optical Properties of a Two-Dimensional Magnetic Semiconductor

Two-dimensional (2D) van der Waals (vdW) magnetic semiconductors are a new class of quantum materials for studying the emergent physics of excitons and spins in the 2D limit. Twist engineering provides a powerful tool to manipulate the fundamental properties of 2D vdW materials. Here, in this work, we show that twist engineering of the anisotropic ferromagnetic monolayer semiconductor CrSBr leads to bilayer magnetic semiconductors with continuously tunable magnetic moment, dielectric anisotropy, exciton energy, and linear dichroism. We furthermore provide a model for exciton energy in the media with tunable anisotropy. These results advance fundamental studies of 2D vdW materials and open doors to applications to nano-optics, twistronics, and spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controlled Dielectric Breakdown to Form Pinhole Passivating Contacts

This contribution explores an alternate route to forming pinhole-based poly-Si/dielectric/c-Si passivating contacts. The method utilizes controlled dielectric breakdown or electroforming to produce nanoscale pinholes in a thick (non-tunnelling) dielectric which, when annealed, allows dopant atoms to pass from doped poly-Si through the pinholes and into the c-Si wafer, forming conductive pathways. We show that the pinholes lose passivation after electroforming but can be repassivated with a forming gas anneal. N-type contacts show contact resistivities of ~20 mOhm-cm2, but p-type contacts are ~100 mOhm-cm2. Devices show a distinct kink in the J-V curve indicative of a barrier to transport. The method can be expanded to optimized dielectric passivation stacks (not just thin, single layers) and can be formed in parallel over the faces of the wafer in selected areas (pinholes only under the grid lines).

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗
DOE OSTI2022

Active and tunable nanophotonic metamaterials

Abstract Metamaterials enable subwavelength tailoring of light–matter interactions, driving fundamental discoveries which fuel novel applications in areas ranging from compressed sensing to quantum engineering. Importantly, the metallic and dielectric resonators from which static metamaterials are comprised present an open architecture amenable to materials integration. Thus, incorporating responsive materials such as semiconductors, liquid crystals, phase-change materials, or quantum materials (e.g., superconductors, 2D materials, etc.) imbue metamaterials with dynamic properties, facilitating the development of active and tunable devices harboring enhanced or even entirely novel electromagnetic functionality. Ultimately, active control derives from the ability to craft the local electromagnetic fields; accomplished using a host of external stimuli to modify the electronic or optical properties of the responsive materials embedded into the active regions of the subwavelength resonators. We provide a broad overview of this frontier area of metamaterials research, introducing fundamental concepts and presenting control strategies that include electronic, optical, mechanical, thermal, and magnetic stimuli. The examples presented range from microwave to visible wavelengths, utilizing a wide range of materials to realize spatial light modulators, effective nonlinear media, on-demand optics, and polarimetric imaging as but a few examples. Often, active and tunable nanophotonic metamaterials yield an emergent electromagnetic response that is more than the sum of the parts, providing reconfigurable or real-time control of the amplitude, phase, wavevector, polarization, and frequency of light. The examples to date are impressive, setting the stage for future advances that are likely to impact holography, beyond 5G communications, imaging, and quantum sensing and transduction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Impact of Humidity and Temperature on the Stability of the Optical Properties and Structure of MAPbI3, MA0.7FA0.3PbI3 and (FAPbI3)0.95(MAPbBr3)0.05 Perovskite Thin Films

In situ real-time spectroscopic ellipsometry (RTSE) measurements have been conducted on MAPbI3, MA0.7FA0.3PbI3, and (FAPbI3)0.95(MAPbBr3)0.05 perovskite thin films when exposed to different levels of relative humidity at given temperatures over time. Analysis of RTSE measurements track changes in the complex dielectric function spectra and structure, which indicate variations in stability influenced by the underlying material, preparation method, and perovskite composition. MAPbI3 and MA0.7FA0.3PbI3 films deposited on commercial fluorine-doped tin oxide coated glass are more stable than corresponding films deposited on soda lime glass directly. (FAPbI3)0.95(MAPbBr3)0.05 films on soda lime glass showed improved stability over the other compositions regardless of the substrate, and this is attributed to the preparation method as well as the final composition.

36 MATERIALS SCIENCE↗
NASA NTRS1968

Improved process for making thin-film sodium niobate capacitors

Sodium niobate, formed by high vacuum, flash, and reactive evaporations, has a high dielectric constant and is used as a thin film dielectric in microelectronic capacitors. High purity films are formed from relatively inexpensive, pure starting materials. Crystalline sodium niobate films can be formed on amorphous or crystalline materials.

Micka, E. Z.↗
NASA NTRS1977

Fabrication and applications of electrets

Permanently charged dielectrics can be made less expensively, faster, and more effectively using improved techniques and materials. Methods include charge injection, Tesla-coil charging, and molten spray. Possible uses include pollution control, low-power sensors, and illumination control.

Pillai, P. K. C.↗
NASA NTRS1976

Technological development of high energy density capacitors

A study was conducted to develop cylindrical wound metallized film capacitors rated 2 micron F 500 VDC that had energy densities greater than 0.1J/g. Polysulfone (PS) and polyvinylidene (PVF2) were selected as dielectrics. Single film PS capacitors of 0.2J/g (uncased) were made of 3.75 micron material. Single film PVF2 capacitors of 0.19J/g (uncased) were made of 6.0 micron material. Corona measurements were made at room temperature, and capacitance and dissipation factor measurements were made over the ranges 25 C to 125 C and 120 Hz to 100 kHz. Nineteen of twenty PVF2 components survived a 2500 hour dc plus ac life test. Failure analyses revealed most failures occurred at wrinkles, but some edge failures were also seen. A 0.989g case was designed. When the case was combined with the PVF2 component, a finished energy density of 0.11J/g was achieved.

Parker, R. D.↗
NASA NTRS1991

Polyimides comprising substituted benzidines

A new class of polyimides and copolyimides made from substituted benzidines and aromatic dianhydrides and other aromatic diamines. The polyimides obtained with said diamines are distinguished by excellent thermal, excellent solubility, excellent electrical properties such as very low dielectric constants, excellent clarity and mechanical properties making the polyimides ideally suited as coating materials for microelectronic apparatii, as membranes for selective molecular or gas separation, as fibers in molecular composites, as high tensile strength, high compression strength fibers, as film castable coatings, or as fabric components.

Harris, Frank W.↗