Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diamond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Developing field emission electron sources based on ultrananocrystalline diamond for accelerators

Radiofrequency (RF) electron guns work by establishing an RF electromagnetic field inside a cavity having conducting walls. Electrons from a cathode are generated in the injector and immediately become accelerated by the RF electric field, and exit the gun as a series of electron bunches. Finding simple solutions for electron injection is a long standing problem. While energies of 30-50 MeV are achievable in linear accelerators (linacs), finding an electron source able to survive under MW electric loads and provide an average current of 1-10 mA is important. Meeting these requirements would open various linac applications for industry. The natural way to simplify and integrate RF injector architectures with the electron source would be to place the source directly into the RF cavity with no need for additional heaters/lasers. Euclid TechLabs in collaboration with Argonne National Lab are prototyping a family of highly effective field emission electron sources based on a nitrogen-incorporated ultrananocrystalline diamond ((N)UNCD) platform. Determined metrics suggest that our emitters are emissive enough to meet requirements for magnetized cooling at electron-ion colliders, linac-based radioisotope production and X-ray sterilization, and others.

field emission↗
DOE OSTI2014

Dosimetry of cone-defined stereotactic radiosurgery fields with a commercial synthetic diamond detector

Purpose: Small field x-ray beam dosimetry is difficult due to lack of lateral electronic equilibrium, source occlusion, high dose gradients, and detector volume averaging. Currently, there is no single definitive detector recommended for small field dosimetry. The objective of this work was to evaluate the performance of a new commercial synthetic diamond detector, namely, the PTW 60019 microDiamond, for the dosimetry of small x-ray fields as used in stereotactic radiosurgery (SRS). Methods: Small field sizes were defined by BrainLAB circular cones (4–30 mm diameter) on a Novalis Trilogy linear accelerator and using the 6 MV SRS x-ray beam mode for all measurements. Percentage depth doses (PDDs) were measured and compared to an IBA SFD and a PTW 60012 E diode. Cross profiles were measured and compared to an IBA SFD diode. Field factors, Ω{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}}, were calculated by Monte Carlo methods using BEAMnrc and correction factors, k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}}, were derived for the PTW 60019 microDiamond detector. Results: For the small fields of 4–30 mm diameter, there were dose differences in the PDDs of up to 1.5% when compared to an IBA SFD and PTW 60012 E diode detector. For the cross profile measurements the penumbra values varied, depending upon the orientation of the detector. The field factors, Ω{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}}, were calculated for these field diameters at a depth of 1.4 cm in water and they were within 2.7% of published values for a similar linear accelerator. The corrections factors, k{sub Q{sub c{sub l{sub i{sub n,Q{sub m{sub s{sub r}{sup f{sub c}{sub l}{sub i}{sub n},f{sub m}{sub s}{sub r}}}}}}}}}, were derived for the PTW 60019 microDiamond detector. Conclusions: The authors conclude that the new PTW 60019 microDiamond detector is generally suitable for relative dosimetry in small 6 MV SRS beams for a Novalis Trilogy linear equipped with circular cones.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2015

Carbon nanoscrolls on the surface of nanocrystalline graphite and diamond films

Nanocrystalline graphite and diamond films with needlelike nanostructures on their surface have been obtained by plasma-enhanced chemical vapor deposition. According to the experimental data, these aggregates have the same nature for films of both types: they are tubular carbon nanoscrolls with a polygonal cross section. Nanoscrolls are formed by a helically folded graphene sheet; they look like twisted prisms. The needlelike prismatic structures have an average diameter in the range of 50‒500 nm, and their length reaches several micrometers. Possible mechanisms of formation of carbon nanostructures are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Structure of Diamond-Like Silicon–Carbon Films Alloyed by Vanadium

The structure of diamond-like silicon–carbon films formed on silicon substrates by magnetron and plasmatron codeposition using a closed-field magnetron and a plasmatron activated by tungsten cathode has been studied by transmission electron microscopy. The main feature of the films alloyed by vanadium to concentrations of 12–31 at % was found to be a layered structure of the film cross section. It was established that vanadium alloying leads to the formation of vanadium carbide (VC) nanocrystals; the nanocrystal size increases from 1–2 to 10 nm. At the maximum vanadium content, VC nanocrystals have an anisotropic shape: they are extended in the direction perpendicular to the film–substrate interface.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Asymptotic Similarity of Time Correlation Functions and Shape of the {sup 13}C and {sup 29}Si NMR Spectra in Diamond and Silicon

Based on the proposed theory, we have investigated the shape of the NMR absorption spectra for {sup 13}C and {sup 29}Si nuclei in diamond and silicon crystals attributable to the internuclear dipole–dipole interaction. In accordance with the available experimental data, we have considered both crystals with a 100% content of magnetoactive isotopes and crystals with a comparatively low dilution by nonmagnetic nuclei. The time correlation functions (the first of which is the Fourier transform of the NMR spectrum) arising in an infinite chain of coupled differential equations are shown to be mutually similar with a slight time delay. The proposed theory allows the spectrum to be calculated analytically. The results obtained agree satisfactorily with the experimental ones. It is noted that the mutual similarity of the time correlation functions is probably a corollary of the development of dynamical chaos in the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Atomic composition and electrical characteristics of epitaxial CVD diamond layers doped with boron

The results of analysis of the atomic composition, doping level, and hole mobility in epitaxial diamond layers when doped with boron are reported. The layers are produced by chemical-vapor deposition. The possibilities of uniform doping with boron to a level in the range 5 × 10{sup 17} to ~10{sup 20} at cm{sup –3} and of δ doping to the surface concentration (0.3–5) × 10{sup 13} at cm{sup –3} are shown. The conditions for precision ion etching of the structures are determined, and barrier and ohmic contacts to the layers are formed.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Effect of hydrogen desorption on the mechanical properties and electron structure of diamond-like carbon nanothreads

The effect of hydrogen desorption on the mechanical stiffness, intrinsic vibrational spectrum, and electron density of states in structurally diamond-like carbon nanothreads is studied in the context of the tight binding model. It is shown that the stiffness only slightly varies in the initial stage of desorption and starts noticeably decreasing after the desorption of ~20% of hydrogen atoms. As hydrogen is desorbed, energy levels that finally form an impurity band appear in the band gap.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Multiphonon Intracenter Relaxation of Boron Acceptor States in Diamond

The relaxation rates are calculated in the adiabatic approximation, in which the steady-state impurity states are taken to be electronic-vibrational (vibronic) states. The probabilities of transitions between these states with the emission (or absorption) of one or several phonons are calculated in first-order perturbation theory on the assumption that the transitions are a result of the violation of adiabaticity. The electron part of the wave function of the vibronic state is described by a simple Hamiltonian with an isotropic effective mass. The wave function of the ground state is determined by the quantum defect method. According to the calculations, a hole relaxes from the excited boron acceptor state, whose energy is 304 meV higher than the energy of the ground state, to the ground state with the emission of two optical phonons with a rate of ~10{sup 11} s{sup –1}. This value is an estimate from above, since the model of nondispersive optical phonons used in the study overestimates the number of phonon modes, whose participation in relaxation is allowed by the energy conservation law. However, despite the rough approximation, it can be concluded that the multiphonon relaxation of boron acceptor states in diamond is a fast process.

36 MATERIALS SCIENCE↗
DOE OSTI2019

On the Two-Phonon Relaxation of Excited States of Boron Acceptors in Diamond

The relaxation of holes from excited states of boron acceptors in diamond with the emission of two optical phonons is studied theoretically. To describe the wave function of acceptor states, an electron-like Hamiltonian with an isotropic effective mass is used. The wave function of the ground state is determined by the quantum-defect method. The probability of the transition is calculated in the adiabatic approximation. It is assumed that the phonon dispersion law is isotropic and the phonon frequency is quadratically dependent on the wave-vector modulus, with the maximum and minimum frequencies ω{sub max} and ω{sub min} at the center and boundary of the Brillouin zone, respectively. A high sensitivity of the probability of the transition to the characteristic of phonon dispersion ω{sub max} – ω{sub min} is revealed, especially for the transition with the energy E{sub T} in the range 2ℏω{sub min} ≤ E{sub T} < ℏω{sub min} + ℏω{sub max}. Depending on the energy of the transition and on the phonon dispersion, the two-phonon relaxation rate at the low-temperature limit varies from extremely small values (<10{sup 8} s{sup –1}) near the threshold E{sub T} = 2ℏω{sub min} to extremely large values (>10{sup 12} s{sup –1}) in the “resonance” range ℏω{sub min} + ℏω{sub max} ≤ E{sub T} ≤ 2ℏω{sub max}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

The Effect of Boron on the Structure and Conductivity of Thin Films Obtained by Laser Ablation of Diamond with Deposition at 700°C

Structural features of CB{sub x} films obtained by pulsed laser ablation of targets made of pressed diamond powder with boron-powder additions at B/C atomic ratio of x = 0.33 have been studied. The films were deposited on heated substrates, so that diffusion processes involving C and B atoms on the surface and in the volume of films were possible. Selected conditions of film deposition ensured their effective doping with boron (0.4 ≤ x ≤ 0.6). The incorporation of B atoms was accompanied by the formation of B–C chemical bonds, whereas the formation of sp{sup 2} graphite bonds and their ordering in clusters with laminar packing was suppressed. The films possessed very low resistivity (~1.4 mΩ cm) at room temperature and exhibited metallic type of conductance on decreasing the temperature to 77 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Contraction of Microwave Discharge in the Reactor for Chemical Vapor Deposition of Diamond

It was found that in a hydrogen-methane mixture in microwave plasma reactor for diamond deposition, there is a threshold pressure after which the contraction of microwave discharge occurs. The results of measurements of gas temperature and spatial distributions of optical emission intensity of discharge are presented. The mechanism of discharge contraction is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Electrochemistry of the Arrow Poison, Tubocurarine, Using Boron Doped Diamond Electrode: Experimental and Theoretical Approaches

In present work boron doped diamond (BDD) electrode was applied for studying electrochemical behavior, as well as for quantitative determination of natural alkaloid, tubocurarine (arrow poison/ TUB). Electrochemical behavior was investigated using several organic solvents and aqueous buffers, at different pHs, as supporting electrolytes. After selection of the most appropriate supporting electrolyte and investigation of its electrochemical behavior, analytical procedures for quantitative analysis of TUB were developed in an acetonitrile/methanol (80:20) mixture and in 1 mol L−1 nitric acid, which had linear quantification ranges from 4 × 10−6 to 1 × 10−4 mol L−1 (LOD = 3.07 × 10−6 mol L−1) and 4 × 10−6 to 9 × 10−5 mol L−1 (LOD = 2.45 × 10−6 mol L−1 and 5.28 × 10−7 mol L−1, depending on the selected peak), respectively. The oxidation mechanism of TUB was proposed from the theoretical aspect. Remarkable selectivity and good sensitivity were obtained after the TUB quantification method was optimized, allowing application of the developed method for TUB quantification in biological fluids, with excellent reproducibility, accuracy and precision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Enhancement of surface area and wettability properties of boron doped diamond by femtosecond laser-induced periodic surface structuring

We demonstrate the formation of laser-induced periodic surface structures (LIPSS) in boron-doped diamond (BDD) by irradiation with femtosecond near-IR laser pulses. The results show that the obtained LIPSS are perpendicular to the laser polarization, and the ripple periodicity is on the order of half of the irradiation wavelength. The surface structures and their electrochemical properties were characterized using Raman micro-spectroscopy, in combination with scanning electron and atomic force microscopies. The textured BDD surface showed a dense and large surface area with no change in its structural characteristics. The effective surface area of the textured BDD electrode was approximately 50% larger than that of a planar substrate, while wetting tests showed that the irradiated area becomes highly hydrophilic. Lastly, our results indicate that LIPSS texturing of BDD is a straightforward and simple technique for enhancing the surface area and wettability properties of the BDD electrodes, which could enable higher current efficiency and lower energy consumption in the electrochemical oxidation of toxic organics.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Optimisation of NSLS-II Blade X-ray Beam Position Monitors: from Photoemission type to Diamond Detector

Optimisation of blade type x-ray beam position monitors (XBPM) was performed for NSLS-II undulator IVU20. Blade material, con and #64257;guration and operation principle was analysed in order to improve XBPM performance. Optimisation is based on calculation of the XBPM signal spatial distribution. Along with standard photoemission type XBPM a Diamond Detector Blades (DDB) were analysed as blades for XBPMs. DDB XBPMs can help to overcome drawbacks of the photoemission blade XBPMs.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Method For Production of Diamond Hardfaced Titanium Carbide/Titanium Bits For Geothermal Drilling

During Phase I, Diamond Materials, Inc. developed compositions and methodology to produce dense superhard D-TiC/Ti composites and performed feasibility studies to characterize structure, hardness, strength, toughness, thermal stability, corrosive wear and oxidation resistance for rock drilling and other applications. As expected multiple iterations were required to optimize the composition and microstructure of the D-TiC/Ti composite to achieve the desired super-hardness, drilling efficiency and high temperature corrosive-wear resistance. It is now experimentally established that D-TiC/Ti composites can be fabricated at much lower pressures and temperatures than D-WC/Co composites, thus manufacturing costs can be significantly reduced. It is also evident that this new process will enable large monolithic articles of superhard materials, including drill bits, to be made using conventional hot pressing equipment of very large working volume.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Seismic Bracing Development for the Moore 3 Diamond Turning Machine at Lawrence Livermore National Laboratory

To allow for on-site Potassium Dihydrogen Phosphate (KDP) crystal finishing capabilities, Lawrence Livermore National Laboratory (LLNL) acquired the Moore 3 diamond turning machine. Equipment such as the Moore 3 is required by LLNL to have adequate seismic bracing before permanent installation to reduce the risk of personnel injury or machine damage during an earthquake. The purpose of this project was to design a bracket that can withstand seismic forces induced by the machine without hindering function. To develop a solution, background research—including stakeholder identification, stakeholder interviews, and a literature survey—was conducted. Based on LLNL site and stakeholder requirements, several approaches were developed for bracing the Moore 3. Ideations were evaluated based on a weighted decision matrix and a final design strategy was selected. This design was an L-shaped weldment that featured provisions for four HILTI concrete anchors, three triangular gussets, and a steel construction.

42 ENGINEERING↗
DOE OSTI2018

Drilling of Hard Rock by Means of Polycrystalline Diamond Inserts

A specialized measurement unit is developed to determine the basic parameters in the drilling of hard rock by bits with polycrystalline diamond inserts. The unit permits the collection of information and its wireless transfer to a computer.

36 MATERIALS SCIENCE↗