Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Complex Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Data Retrieval Algorithms for Validating the Optical Transient Detector and the Lightning Imaging Sensor

A linear algebraic solution is provided for the problem of retrieving the location and time of occurrence of lightning ground strikes from an Advanced Lightning Direction Finder (ALDF) network. The ALDF network measures field strength, magnetic bearing, and arrival time of lightning radio emissions. Solutions for the plane (i.e., no earth curvature) are provided that implement all of these measurements. The accuracy of the retrieval method is tested using computer-simulated datasets, and the relative influence of bearing and arrival time data an the outcome of the final solution is formally demonstrated. The algorithm is sufficiently accurate to validate NASA:s Optical Transient Detector and Lightning Imaging Sensor. A quadratic planar solution that is useful when only three arrival time measurements are available is also introduced. The algebra of the quadratic root results are examined in detail to clarify what portions of the analysis region lead to fundamental ambiguities in sc)iirce location, Complex root results are shown to be associated with the presence of measurement errors when the lightning source lies near an outer sensor baseline of the ALDF network. For arbitrary noncollinear network geometries and in the absence of measurement errors, it is shown that the two quadratic roots are equivalent (no source location ambiguity) on the outer sensor baselines. The accuracy of the quadratic planar method is tested with computer-generated datasets, and the results are generally better than those obtained from the three-station linear planar method when bearing errors are about 2 deg.

Koshak, W. J.↗

Four-Point-Latching Microactuator

An experimental inchworm-type linear microactuator is depicted. This microactuator is a successor to one described in "MEMS-Based Piezoelectric/Electrostatic Inchworm Actuator" (NPO-30672), NASA Tech Briefs, Vol. 27, No. 6 (June 2003), page 68. Both actuators are based on the principle of using a piezoelectric transducer operated in alternation with electrostatically actuated clutches to cause a slider to move in small increments. However, the design of the present actuator incorporates several improvements over that of the previous one. The most readily apparent improvement is in geometry and, consequently, in fabrication: In the previous actuator, the inchworm motion was perpendicular to the broad faces of a flat silicon wafer on which the actuator was fabricated, and fabrication involved complex processes to form complex three-dimensional shapes in and on the wafer. In the present actuator, the inchworm motion is parallel to the broad faces of a wafer on which it is fabricated. The components needed to produce the in-plane motion are nearly planar in character and, consequently, easier to fabricate. Other advantages of the present design are described, including that the previous actuator contained two clutches (denoted 'holders' in the cited prior article), the present actuator contains four clutches. The operational sequence of the previous two-clutch actuator is similar. However, the two-clutch configuration is susceptible to tilt of the slider and a consequent large increase in drag. Hence, the primary operational advantages of the present four-point-latching design over the prior two-point-latching design are less drag and greater control robustness arising from greater stability of the orientation of the slider.

Toda, Risaku↗

Sonic Boom Mitigation Through Aircraft Design and Adjoint Methodology

This paper presents a novel approach to design of the supersonic aircraft outer mold line (OML) by optimizing the A-weighted loudness of sonic boom signature predicted on the ground. The optimization process uses the sensitivity information obtained by coupling the discrete adjoint formulations for the augmented Burgers Equation and Computational Fluid Dynamics (CFD) equations. This coupled formulation links the loudness of the ground boom signature to the aircraft geometry thus allowing efficient shape optimization for the purpose of minimizing the impact of loudness. The accuracy of the adjoint-based sensitivities is verified against sensitivities obtained using an independent complex-variable approach. The adjoint based optimization methodology is applied to a configuration previously optimized using alternative state of the art optimization methods and produces additional loudness reduction. The results of the optimizations are reported and discussed.

Rallabhandi, Siriam K.↗

Flow in out-of-plane double S-bends

An experimental investigation of developing flows through a combination of out-of-plane S-bend ducts was conducted to gain insight into the redirection of flow in geometries similar to those encountered in practical aircraft wing-root intake ducts. The present double S-bend was fabricated by placing previously investigated S-ducts and S-diffusers in series and with perpendicular planes of symmetry. Laser-Doppler anemometry was employed to measure the three components of mean velocity, the corresponding rms quantities, and Reynolds stresses in the rectangular cross-section ducts. Due to limited optical access, only two mean and rms velocity components were resolved in the circular cross-section ducts. The velocity measurements were complemented by wall static pressure measurements. The data indicates that the flows at the exit are complex and asymmetric. Secondary flows generated by the pressure field in the first S-duct are complemented or counteracted by the secondary flows produced by the area expansion and the curvature of the S-diffuser. The results indicate the dominance of the inlet conditions and geometry upon the development of secondary flows and demonstrate that the flows are predominantly pressure-controlled. The pressure distribution caused by the duct geometry determines the direction and magnitude of the bulk flow while the turbulence dictates the mixing characteristics and profiles in the near wall region.

Schmidt, M. C.↗

Transonic analysis of the F-16A with under-wing fuel tanks - An application of the TranAir full-potential code

Initial results obtained using the TranAir transonic full-potential code are presented for a fully configured F-16A geometry, including two 370-gal under-wing fuel tanks, at freestream Mach numbers of 0.6 and 0.9 and angle of attack of 4 deg. The geometry is modeled using surface panels, and the flow field is defined by a rectangular array of flow-field grid points. The paneled geometry is embedded within this rectangular flow field. By avoiding the use of surface-conforming flow-field grids, the modeling generality afforded by surface panels can be utilized to analyze very complex configurations in the transonic flow regime.

Madson, Michael D.↗

In Situ Mineralogical Analysis of Planetary Materials Using X-Ray Diffraction and X-Ray Fluorescence

Remote observations of Mars have led scientists to believe that its early climate was similar to that of the early Earth, having had abundant liquid water and a dense atmosphere. One of the most fascinating questions of recent times is whether simple bacterial life developed on Mars (as it did on the Earth) during this early element period. Analyses of SNC meteorites have broadened considerably our knowledge of the chemistry of certain types of Martian rocks, underscoring the tantalizing possibility of early hydrothermal systems and even of ancient bacterial life. Detailed analyses of SNC meteorites in Terrestrial laboratories utilize the most sophisticated organic, isotopic and microscopic techniques in existence. Indeed; it is unlikely that the key biogenic indicators used in McKay et al (ibid) could be identified by a remote instrument on the surface of Mars. As a result, it is probable that any robotic search for evidence of an ancient Martian biosphere will have as its focus the identification of key minerals in likely host rocks rather than the direct detection of organic or isotopic biomarkers. Even on a sample return mission, mineralogical screening will be utilized to choose the most likely candidate rocks. X-ray diffraction (XRD) is the only technique that can provide a direct determination of the crystal structures of the phases present within a sample. When many different crystalline phases are present, quantitative analysis is better constrained if used in conjunction with a determination of elemental composition, obtainable by X-ray fluorescence (XRF) using the same X-ray source as for XRD. For planetary surface analysis, a remote instrument combining XRD and XRF could be used for mineralogical characterization of both soils and rocks. We are designing a remote XRD/XRF instrument with this objective in mind. The instrument concept pays specific attention to constraints in sample preparation, weight, volume, power, etc. Based on the geometry of a pinhole camera (transmission geometry, flat two-dimensional detector perpendicular to the direct beam), the instrument (which we call CHEMIN, for Chemistry and Mineralogy) uses an X-ray sensitive CCD detector which will allow concurrent positional and energy-dispersive analysis of collected photons. Thus XRF (energy) and XRD (geometry) analysis of transmitted X-rays will be performed at the same time. Tests performed with single minerals and simple mixtures give promising results. Refinements of the prototype promise interpretable results on complex samples.

Sarrazin, P.↗

Simulation of Charge Collection to Spacecraft Surfaces: Freja Satellite

As spacecraft travel through plasma, spacecraft surfaces become charged by the collection of charged particles. This process is referred to as Surface Charging. These charges can be detrimental to the vehicle's electronic subsystems as they present a threat of electrostatic discharge (ESD) to onboard circuitry. The process of Surface Charging is complex and is affected by many elements. The charging of each surface is unique. The potential of an individual surface is dependent upon many variables including but not limited to the surface's geometry, material and its location. Each surface also has unique interactions with the surrounding plasma. Other factors that play large roles in the charging process is the density and temperature of plasma ions and electrons. Using Nascap-2k, a model of the Freja satellite has been constructed, and its auroral plasma environment has been imitated to simulate surface charging characteristics. The charging process of the Freja satellite has been modeled iteratively with incremental changes in both the Maxwellian electron temperature (eV) as well as the Gaussian electron energy (eV). This study provides an analysis of the sensitivity between spacecraft surface charging and these two primary variables of electron differential flux.

Wolfley, Olivia H.↗

Simulation of Charge Collection to Spacecraft Surfaces: Freja Satellite

As spacecraft travel through space plasma, spacecraft surfaces become charged by the collection of charged particles. This process is referred to as Surface Charging. These charges can be detrimental to the vehicle's electronic subsystems as they present a threat of electrostatic discharge (ESD) to onboard circuitry. The process of Surface Charging is complex and is affected by many elements. The charging of each surface is unique. The potential of an individual surface is dependent upon many variables including but not limited to the surface's geometry, material and its location. Each surface also has unique interactions with the surrounding plasma. Other factors that play large roles in the charging process is the density and temperature of plasma ions and electrons. Using Nascap-2k, a model of the Freja satellite has been constructed, and its auroral plasma environment has been imitated to simulate surface charging characteristics. The charging process of the Freja satellite has been modeled iteratively with incremental changes in both the Maxwellian electron temperature (eV) as well as the Gaussian electron energy (eV). This study provides an analysis of the sensitivity between spacecraft surface charging and these two primary variables of electron differential flux.

Wolfley, Olivia Hope↗

Temperature and Chemical Species Distributions in the Middle Atmosphere Observed during Titan's Late Northern Spring to Early Summer

We present a study of the seasonal evolution of Titan’s thermal field and distributions of haze, C2H2, C2H4, C2H6, CH3C2H, C3H8, C4H2, C6H6, HCN, and HC3N from March 2015 (Ls = 66°) to September 2017 (Ls = 93°) (i.e., from the last third of northern spring to early summer). We analyzed thermal emission of Titan’s atmosphere acquired by the Cassini Composite Infrared Spectrometer with limb and nadir geometry to retrieve the stratospheric and mesospheric temperature and mixing ratios pole-to-pole meridional cross sections from 5 mbar to 50 μbar (120–650 km). The southern stratopause varied in a complex way and showed a global temperature increase from 2015 to 2017 at high-southern latitudes. Stratospheric southern polar temperatures, which were observed to be as low as 120 K in early 2015 due to the polar night, showed a 30 K increase (at 0.5 mbar) from March 2015 to May 2017 due to adiabatic heating in the subsiding branch of the global overturning circulation. All photochemical compounds were enriched at the south pole by this subsidence. Polar cross sections of these enhanced species, which are good tracers of the global dynamics, highlighted changes in the structure of the southern polar vortex. These high enhancements combined with the unusually low temperatures (<120 K) of the deep stratosphere resulted in condensation at the south pole between 0.1 and 0.03 mbar (240–280 km) of HCN, HC3N, C6H6 and possibly C4H2 in March 2015 (Ls = 66°). These molecules were observed to condense deeper with increasing distance from the south pole. At high-northern latitudes, stratospheric enrichments remaining from the winter were observed below 300 km between 2015 and May 2017 (Ls = 90°) for all chemical compounds and up to September 2017 (Ls = 93°) for C2H2, C2H4, CH3C2H, C3H8, and C4H2. In September 2017, these local enhancements were less pronounced than earlier for C2H2, C4H2, CH3C2H, HC3N, and HCN, and were no longer observed for C2H6 and C6 H6, which suggests a change in the northern polar dynamics near the summer solstice. These enhancements observed during the entire spring may be due to confinement of this enriched air by a small remaining winter circulation cell that persisted in the low stratosphere up to the northern summer solstice, according to predictions of the Institut Pierre Simon Laplace Titan Global Climate Model (IPSL Titan GCM). In the mesosphere we derived a depleted layer in C2H2, HCN, and C2H6 from the north pole to mid-southern latitudes, while C4H2, C3H4, C2H4, and HC3N seem to have been enriched in the same region. In the deep stratosphere, all molecules except C2H4 were depleted due to their condensation sink located deeper than 5 mbar outside the southern polar vortex. HCN, C4H2, and CH3C2H volume mixing ratio cross section contours showed steep slopes near the mid-latitudes or close to the equator, which can be explained by upwelling air in this region. Upwelling is also supported by the cross section of the C2H4 (the only molecule not condensing among those studied here) volume mixing ratio observed in the northern hemisphere. We derived the zonal wind velocity up to mesospheric levels from the retrieved thermal field. We show that zonal winds were faster and more confined around the south pole in 2015 (Ls = 67−72°) than later. In 2016, the polar zonal wind speed decreased while the fastest winds had migrated toward low-southern latitudes.

S Vinatier↗

Numerical Behaviour of a Smooth Local Correlation-based Transition Model in a Newton-Krylov Flow Solver

The numerical behaviour of transport-equation-based transition models, including both iterative and grid convergence, is influenced by the source terms. Transition models contain source terms that are large and highly nonlinear, and can be destabilizing in a strong implicit solver. Linearization strategies with varying levels of coupling are evaluated in conjunction with a source-term time step restriction to determine best-practices for solving the SA-sLM2015smooth local correlation-based transition model in an implicit Newton-Krylov flow solver. Achieving deep iterative convergence facilitates a detailed investigation of the grid convergence of these free-transition simulations, which are evaluated relative to fully-turbulent simulations performed using the Spalart-Allmaras turbulence model. Simulations of the NLF0416 general aviation airfoil, VA-2 supercritical airfoil, and NASA CRM-NLF wing-body geometry are performed over a range of grid levels. The results demonstrate that both a fully-coupled linearization strategy and a source-term time step restriction improve nonlinear convergence as the complexity of the free-transition simulations increases. In general, additional grid resolution is required for free-transition simulations relative to fully-turbulent simulations in order to achieve a similar level of accuracy, with the grid convergence of free-transition simulations sensitive to the streamwise grid spacings in the transition regions.

AATT↗

Assessing Utility of Different Orbits for a Lunar PNT Constellation

"As the Artemis program establishes a long-term presence on the lunar surface, lunar surface users will need an accurate source of Position, Navigation, and Timing (PNT). Under the LunaNet framework, NASA has proposed the Lunar Navigation System (LNS), a constellation of satellites in lunar orbit which will broadcast LunaNet’s Augmented Forward Signal (AFS) [1] to the lunar surface. LNS will have the objective of providing user position accuracies of 10 m and timing accuracies of 10 microseconds on the lunar surface and up to 200 km above the surface. Several classes of orbits are possibilities for the LNS constellation, including circular orbits, eccentric orbits, and various families of 3-body orbits. Each of these orbit classes have both advantages and disadvantages in their utility as PNT constellations. In this study we examine a wide variety of potential LNS constellations and evaluate their performance against several metrics, including: a. Dilution of Precision (DOP) performance over the lunar service volume and the South Pole region, during both the constellation buildup and after the constellation is completed. b. Number of satellites required to achieve required DOP performance. c. Relative dynamics of LNS satellites with respect to surface users. d. Signal in space error (SISE) performance, assuming orbit determination that includes the Global Positioning System (GPS), crosslinks, and monitor sites on the surface of the moon. e. Constellation insertion, station keeping, and disposal costs. f. Specific Concept of Operations (CONOPS) and engineering challenges associated with establishing and operating the constellations. (E.g., frequent station keeping, variable signal strength, divergent CONOPS for different planes of the constellation.) The system’s performance is considered both independently and in combination with other proposed systems, such as NASA’s Lunar Communication Relay and Navigation System (LCRNS) and ESA’s Moonlight constellation. The study concludes that a 3-plane Walker constellation at 6 lunar radii (slightly higher than GPS’s 4.2 earth radii from a geometry perspective, but significantly closer in an absolute sense) is a good candidate for the LNS constellation, providing the user with good SISE and DOP performance, while not requiring excessive station keeping or complex CONOPS. However, other viable concepts exist and could be chosen if early South Pole coverage is a driving factor in the system design."

navigation↗

SPACEBAR: Kinematic design by computer graphics

The interactive graphics computer program SPACEBAR, conceived to reduce the time and complexity associated with the development of kinematic mechanisms on the design board, was described. This program allows the direct design and analysis of mechanisms right at the terminal screen. All input variables, including linkage geometry, stiffness, and applied loading conditions, can be fed into or changed at the terminal and may be displayed in three dimensions. All mechanism configurations can be cycled through their range of travel and viewed in their various geometric positions. Output data includes geometric positioning in orthogonal coordinates of each node point in the mechanism, velocity and acceleration of the node points, and internal loads and displacements of the node points and linkages. All analysis calculations take at most a few seconds to complete. Output data can be viewed at the scope and also printed at the discretion of the user.

Ricci, R. J.↗

Boundary Heat Fluxes for Spectral Radiation from a Uniform Temperature Rectangular Medium

The effect of spectral behavior is analytically shown for radiation in a 2D rectangular geometry. The solution provides exact boundary heat flux values that can be used for comparison with values obtained from general computer programs. The spectral solution presented can be easily evaluated by numerical integration for complex variations of the spectral absorption coefficient with wavelength.

Siegel, Robert↗

Cyclotron Resonant Scattering Feature Simulations II. Description of the CRSF Simulation Process

Context. Cyclotron resonant scattering features (CRSFs) are formed by scattering of X-ray photons o_ quantized plasma electrons in the strong magnetic field (of the order 1012 G) close to the surface of an accreting X-ray pulsar. Due to the complex scattering cross-sections, the line profiles of CRSFs cannot be described by an analytic expression. Numerical methods, such as Monte Carlo (MC) simulations of the scattering processes, are required in order to predict precise line shapes for a given physical setup, which can be compared to observations to gain information about the underlying physics in these systems.Aims. A versatile simulation code is needed for the generation of synthetic cyclotron lines. Sophisticated geometries should be investigatable by making their simulation possible for the first time.Methods. The simulation utilizes the mean free path tables described in the first paper of this series for the fast interpolation of propagation lengths. The code is parallelized to make the very time-consuming simulations possible on convenient time scales. Furthermore, it can generate responses to monoenergetic photon injections, producing Green's functions, which can be used later to generate spectra for arbitrary continua.Results. We develop a new simulation code to generate synthetic cyclotron lines for complex scenarios, allowing for unprecedented physical interpretation of the observed data. An associated XSPEC model implementation is used to fit synthetic line profiles to NuSTAR data of Cep X-4. The code has been developed with the main goal of overcoming previous geometrical constraints in MC simulations of CRSFs. By applying this code also to more simple, classic geometries used in previous works, we furthermore address issues of code verification and cross-comparison of various models. The XSPEC model and the Green's function tables are available online (see link in footnote, page 1).

Schwarm, F.-W.↗

Eutectic bonding of boron-aluminum structural components. II

Eutectic bonding is a diffusion brazing process developed for fabricating boron-aluminum components from composite monolayer. This process relies on the diffusion of a thin surface film of copper into the aluminum matrix to form a liquid phase when heated above the copper-aluminum eutectic temperature of 1018 F. This type of fabrication offers design flexibility in that skin thickness may be varied, the stiffness geometry and orientation can be varied, and local reinforcement can be added. In addition, this type of boron-aluminum structure offers high efficiency. Also, this method of construction can be cost-comparative with complex titanium shapes; simple tooling permits easy layup, bonding is a one-step operation, and little finish machining is required.

Niemann, J. T.↗

Development of Spaceborne SoOp Reflectometry Model for Complex Terrains

Following the launch of multiple global navigation satel-lite system (GNSS) reflectometry (GNSS-R) missions, theSignals of Opportunity (SoOp) method has proven to be apowerful tool for geophysical parameter retrieval for land ap-plications such as soil moisture. Having demonstrated thefeasibility of the SoOp techniques at P- and S-band, the devel-opment of SoOp measurements beyond the GNSS frequencyregime is highly anticipated. The SoOp Coherent Bistatic(SCoBi) model and simulator, developed in 2017 and open-sourced in 2018, has been made available to provide multi-frequency, fully polarimetric SoOp simulations for ground-based applications through the joint use of analytical wavetheory and distorted Borne approximation to evaluate landcontributions from multilayer dielectric profiles composed ofsoil moisture, vegetation, and surface roughness effects. Thispaper describes the advancement of SCoBi from a ground-and airborne-based model to a spaceborne model. This ex-tension allows for fully polarimetric, complex delay-Dopplermap (DDM) simulations through evaluation of the coherentsuperposition of electric fields emerging from a grid of ori-ented facets. The model generates a grid of facets by de-termining the geometry of contributing elements from digitalelevation models, with each element providing its contribu-tion under a flat-earth assumption. This module will enablethe analysis of fully polarimetric scattering from frequenciesavailable across the ultra-high frequency (UHF) regime.

D R Boyd↗

Using Neural Networks to Improve the Performance of Radiative Transfer Modeling Used for Geometry Dependent Surface Lambertian-Equivalent Reflectivity Calculations

Surface Lambertian-equivalent reflectivity (LER) is important for trace gas retrievals in the direct calculation of cloud fractions and indirect calculation of the air mass factor. Current trace gas retrievals use climatological surface LER's. Surface properties that impact the bidirectional reflectance distribution function (BRDF) as well as varying satellite viewing geometry can be important for retrieval of trace gases. Geometry Dependent LER (GLER) captures these effects with its calculation of sun normalized radiances (I/F) and can be used in current LER algorithms (Vasilkov et al. 2016). Pixel by pixel radiative transfer calculations are computationally expensive for large datasets. Modern satellite missions such as the Tropospheric Monitoring Instrument (TROPOMI) produce very large datasets as they take measurements at much higher spatial and spectral resolutions. Look up table (LUT) interpolation improves the speed of radiative transfer calculations but complexity increases for non-linear functions. Neural networks perform fast calculations and can accurately predict both non-linear and linear functions with little effort.

Geometry Dependent LER (GLER) capture↗