SEARCH · Engineering Papers

Results for “CONVECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Supercritical droplet gasification experiments with forced convection

Preliminary results of a comprehensive experimental program are presented which offer the first direct observations of suspended n-heptane droplet gasifications in pure nitrogen with forced convection without the interference to optical probing associated with a flame. Measurements show attainment of a wet-bulb temperature until reduced pressures exceed about 1.0 under supercritical gas temperatures. Thereafter, temperature measurements indicate fully transient heat-up through the critical temperature. The surface is found to regress in a continuous manner with the measured temperature approaching the critical value at the end of the droplet lifetime under supercritical conditions with very mild level of convection. At increased level of convection for the same ambient conditions, similar sized droplets will undergo significant deformation during the gasification process until partially convected away as a dense vapor cloud as the critical temperature is approached.

Litchford, Ron↗

NASA NTRS1992

Evolution of a magnetic flux tube in two-dimensional penetrative convection

Highly supercritical compressible convection is simulated in a two-dimensional domain in which the upper half is unstable to convection while the lower half is stably stratified. This configuration is an idealization of the layers near the base of the solar convection zone. Once the turbulent flow is well developed, a toroidal magnetic field B sub tor is introduced to the stable layer. The field's evolution is governed by an advection-diffusion-type equation, and the Lorentz force does not significantly affect the flow. After many turnover times the field is stratified such that the absolute value of B sub tor/rho is approximately constant in the convective layer, where rho is density, while in the stable layer this ratio decreases linearly with depth. Consequently most of the magnetic flux is stored in the overshoot layer. The inclusion of rotation leads to travelling waves which transport magnetic flux latitudinally in a manner reminiscent of the migrations seen during the solar cycle.

Jennings, R. L.↗

NASA NTRS1993

Mesoscale characteristics of monsoonal convection and associated stratiform precipitation

Observations undertaken on 12 January 1990 at Darwin (Australia) are used to document the structure of a monsoonal rainband in a low convective available potential energy low-shear tropical environment. Dual-Doppler radar analyses are employed to investigate the structure and kinematics of the convective and stratiform regions. A system with the characteristics of a relatively short-lived squall line in which warm rain processes play a significant role in the production of precipitation is evident. Planetary boundary layer cold-pool production is important in the organization and motion of the system. A trailing stratiform region is evident with a mean updraft-downdraft circulation, but is composed of in situ decaying convective cells. A storm-relative mesoscale cyclonic circulation is also observed within the stratiform cloud. This vortex was maintained by thermodynamically induced midlevel convergence, convectively generated storm-scale circulations, and their interaction with the background monsoon flow.

Keenan, Thomas D.↗

NASA NTRS1993

Hard turbulent thermal convection and thermal evolution of the mantle

Hard turbulent convection is investigated using laboratory experiments and numerical simulations. In Newtonian mantle convection, the appearance of disconnected plumes marks the transition from soft to hard turbulence. For non-Newtonian rheology, the transition to hard turbulence takes place at much lower Nusselt numbers than it does for Newtonian rheology. This has important ramifications for the mantle. Large curvatures are developed in the trajectories of non-Newtonian plumes in the hard turbulent regime, in contrast to the trajectories of Newtonian plumes. When phase transitions are considered, mantle convection tends to become more layered with increasing Rayleigh numbers. The manner of mantle convection might have changed with time from a layered to a more whole mantle type of flow. Superplume events could have been caused by catastrophic overturns associated with strong gravitational instabilities in the transition zone.

Yuen, D. A.↗

NASA NTRS1993

On the generation of sound by turbulent convection. I - A numerical experiment

Motivated by the problem of the origin of the solar p-modes, we study the generation of acoustic waves by turbulent convection. Our approach uses the results of high-resolution 3D simulations as the experimental basis for our investigation. The numerical experiment describes the evolution of a horizontally periodic layer of vigorously convecting fluid. The sound is measured by a procedure, based on a suitable linearization of the equations of compressible convection that allows the amplitude of the acoustic field to be determined. Through this procedure we identify unambiguously some 400 acoustic modes. The total energy of the acoustic field is found to be a fraction of a percent of the kinetic energy of the convection. The amplitudes of the observed modes depend weakly on (horizontal) wavenumber but strongly on frequency. The line widths of the observed modes typically exceed the natural linewidths of the modes as inferred from linear theory. This broadening appears to be related to the (stochastic) interaction between the modes and the underlying turbulence which causes abrupt, episodic events during which the phase coherence of the modes is lost.

Bogdan, Thomas J.↗

NASA NTRS1992

Analyses of GOES infrared convective cloud-top temperatures for extended periods - An overview of the 1990 warm season for a subtropical region

Full-resolution GOES data archived over North America at hourly time intervals are used to examine the seasonal climatology of deep convective cloudiness for two warm seasons. The analyses discussed here concern convective activity across subtropical latitudes from east of Florida to westward of Baja California. It is demonstrated that high-resolution GOES data can be processed on long-time scales to elucidate aspects of regional convective activity and its monthly, seasonal, and interannual variability. The results can be directly compared with corresponding analyses of mean tropospheric features to identify key forcing mechanisms for regional convection.

Maddox, Robert A.↗

NASA NTRS1993

A solar dynamo surface wave at the interface between convection and nonuniform rotation

A simple dynamo surface wave is presented to illustrate the basic principles of a dynamo operating in the thin layer of shear and suppressed eddy diffusion beneath the cyclonic convection in the convection zone of the sun. It is shown that the restriction of the shear delta(Omega)/delta(r) to a region below the convective zone provides the basic mode with a greatly reduced turbulent diffusion coefficient in the region of strong azimuthal field. The dynamo takes on the character of a surface wave tied to the lower surface z = 0 of the convective zone. There is a substantial body of evidence suggesting a fibril state for the principal flux bundles beneath the surface of the sun, with fundamental implications for the solar dynamo.

Parker, E. N.↗

NASA NTRS1991

Kinematic and precipitation structure of a small, long-lived mesoscale convective system

A comprehensive analysis using conventional single Doppler radar analyses, analysis of multiparameter (CP-2) data, network sounding and surface data, and GOES satellite data is presented to characterize the internal kinematic and precipitation structure of a small, long-lived mesoscale convective system. The data pertain to the Cooperative Huntsville Meteorological experiment conducted over northern Alabama and central Tennessee during June and July of 1986. The mesoscale convective system pulsations visible in the IR patterns were associated with the development of closely interacting aggregates of convective elements. The aggregates were about 20 km in diameter, attained echo tops of about 13 km, and were dominated by a single relatively intense convective element. The measured difference in radial velocity across the upper portion of these elements was about 20 m/s over a distance of about 10 km.

Knupp, Kevin R.↗

NASA NTRS1993

Upper tropospheric ozone production following mesoscale convection during STEP/EMEX

The chemistry and dynamics of a convective system observed on February 2, 1987 in the EMEX and STEP campaigns are analyzed. Chemical and thermodynamic profiles in undisturbed air near the EMEX 9 system indicate that the troposphere was well mixed by previous convection. As a consequence there was little direct transport from the boundary layer to the upper troposphere and air transported upward was detrained throughout the middle and upper troposphere. There was minimal effect on O3 production. Other convective complexes located 800-900 km upstream produced greater perturbations on trace gas profile immediately below the tropopause. Ozone production was reduced by about 0.25 ppbv/d at these altitudes, representing a reduction in P(O3) of 15-20 percent over the column from 14.5 to 17 km. P(O3) from 12 to 17 km in a region distant from active convection and subject to lightning was 2-3 times higher than it would have been without lightning.

Pickering, Kenneth E.↗

NASA NTRS1992

Thermosolutal convection during dendritic solidification of a binary alloy

The FEM model of Heinrich (1988) is presently extended to the case of dendritic vertical solidification under steady-state conditions. An analysis is conducted of the nonlinear governing equations for linear stability, and FEM calculations are performed in cases where instability has been predicted for Pb-Sn melt systems; the results obtained show that the model is more stable than the plane front liquid-solid model, and shows similar, finger-like covection when unstable. It is found that convection in the 'mush' zone is confined to the top of that region; convective motion is driven by convection in the bulk fluid, in the absence of natural convection.

Heinrich, Juan C.↗

NASA NTRS1993

Steady, three-dimensional, internally heated convection

Numerical calculations have been carried out of steady, symmetric, 3D modes of convection in internally heated, infinite Prandtl number, Boussinesq fluids at a Rayleigh number of 1.4 x 10 exp 4 in a spherical shell with inner/outer radius of 0.55 and in a 3 x 3 x 1 rectangular box. Multiple patterns of convection occur in both geometries. In the Cartesian geometry, the patterns are dominated by cylindrical cold downflows and a broad hot upwelling. In the spherical geometry the patterns consist of cylindrical cold downwellings centered either at the vertices of a tetrahedron or the centers of the faces of a cube. The cold downflow cylinders are immersed in a background of upwelling within which there are cylindrical hot concentrations (plumes) and hot halos around the downflows. The forced hot upflow return plumes of internally heated spherical convection are fundamentally different from the buoyancy-driven plumes of heated from below convection.

Schubert, G.↗

NASA NTRS1993

Test of a new theory for stellar convection using helioseismology

Two evolutionary models of the sun have been tested using helioseismological data. The two models use the same input microphysics (nuclear reaction rates, opacity, equation of state) and the same numerical evolutionary code, but differ in the treatment of turbulent convection. The first model employs the standard mixing - length theory of convection, while the second one employs a new turbulent convection model which overcomes some basic inconsistencies of the standard theory of convection. The test rests on the calculation of p-mode eigenfrequencies and on the comparison with the helioseismological data. The comparison shows an overall improvement of the eigenfrequencies calculated with the new model with respect to those calculated with the standard model, although it appears that both models still suffer from inaccuracies especially in the treatment of the surface layers.

Paterno, L.↗

NASA NTRS1991

Numerical simulations of turbulent thermal convection with differential rotation

The solar nebula, from which the planets in our solar system formed, featured a disk of gas and dust grains in rapid, differential rotation, and at some stage was likely to have been unstable to thermal convection. This situation is suspected by many to lead to significant turbulent Reynolds stress production and angular momentum transport in such systems, and estimates of transport rates have been attempted from unsubstantiated phenomenological models. In order to determine the circumstances and physical conditions under which our own planetary system formed and to explain recent observations of young stellar systems, it is necessary to develop realistic models of heat and angular momentum transport for such flows. Developing an understanding of complicated flows featuring thermal convection, rotation, and shear is also of wide interest in stellar astrophysics and in planetary and terrestrial atmospheric studies. The ultimate objective is to develop workable models based on the numerical simulations for constructing global solar nebula models; viz., relatively simple prescriptions for heat and angular momentum fluxes from given system parameters (e.g., ratios of rotation, shear, and convective lapse rates) are characterized, quantified, and developed. Toward this end, our program has been to attempt to understand the behavior of the direct numerical simulations of Boussinesq convection, which, despite the complexity of the results, is still an overly simplified approximation to the real system and should be more amenable to analysis. These results are also intended to be tested against turbulence models, especially those designed for atmospheric boundary layers, and may provide a basis for subgrid-scale models. In order to make the numerical simulations more realistic with regard to the solar nebula problem, a fully compressible code that will allow incorporation of large density stratifications and realistic thermodynamic and radiative properties is developed. In order to explore the properties of these flows at the very high values of Re found in natural systems and the very low values of Pr found in most astrophysical contexts, we will need to employ large-eddy simulations for which we want to determine the most appropriate subgrid-scale model to incorporate.

Cabot, William H.↗

NASA NTRS1992

Marangoni instability induced convection in an evaporating liquid droplet

The processes occurring when a liquid drop undergoes evaporation are described. When a liquid drop undergoes evaporation, its surface temperature decreases. If the droplet is free floating in a microgravity environment, the heat transfer process inside the droplet is initially condition controlled. As the process continues, a radial temperature gradient builds up at the free surface until the critical Marangoni number is exceeded. Then the onset of instability induces thermocapillary convective flows, which in turn speed up the evaporation. The convective flows will subside when the interior of the droplet reaches a certain equilibrium temperature, and the process will return to the diffusion controlled mode. Both preliminary modeling and recent laboratory data have confirmed that Marangoni instability induced convection can and does occur in the droplet evaporation process. Mathematical models representing Marangoni instability in an evaporating liquid drop are presented. An ideal space experiment to study and characterize the onset of Marangoni instability in an evaporating liquid droplet and to establish the effect of Marangoni instability induced convection on the droplet evaporation rate is outlined and the need for conducting such experiments in space is highlighted. However, before an opportunity to conduct experiments in space arises, ground based experiments have to be conducted to study feasibility issues and proof of concept. A ground based experiment of this type is outlined.

Chai, An-Ti↗

NASA NTRS1992

Benard and Marangoni convection in multiple liquid layers

Convective fluid dynamics of immiscible double and triple liquid layers are considered. First results on multilayer convective flow, in preparation for spaceflight experiment aboard IML-2 (International Microgravity Laboratory), are discussed. Convective flow in liquid layers with one or two horizontal interfaces with heat flow applied parallel to them is one of the systems investigated. The second system comprises two horizontally layered immiscible liquids heated from below and cooled from above, that is, heat flow orthogonal to the interface. In this system convection results due to the classical Benard instability.

Koster, Jean N.↗

NASA NTRS1994

Use of rotation to suppress thermosolutal convection in directionally solidified binary alloys

Effects of rotation on onset of convection during plane-front directional solidification of Pb-Sn and the pseudobinary system mercury cadmium telluride (Hg(1-x)Cd(x)Te), and on dendritic solidification of Pb-Sn have been studied by means of linear stability analysis. Incorporating Coriolis and centrifugal accelerations into the momentum equation of Coriell et al., we find that under realistic processing conditions, a large degree of stabilization can be achieved using modest rotation rates for both Pb-Sn and mercury cadmium telluride. At a growth velocity of 5 micron/sec and nominal liquid-side temperature gradient of 200 K/cm in Pb-Sn, rotation at 500 rpm results in a hundredfold increase in the critical Sn concentration. Large increases in the maximum allowable growth velocity at fixed melt composition are also attainable with modest rotation rates. The effect is amplified under conditions of reduced gravitational acceleration. For Hg(1-x)Cd(x)Te, we have also studied the nonrotating case. The key differences are due to the existence of a composition range for Hg(1-x)Cd(x)Te in which the melt density has a local maximum as a function of temperature. When the melt solidifies by cooling from below, the liquid density may initially increase with distance above the interface, before ultimately decreasing as the melt temperature increases above the value at which the local density maximum occurs. In contrast to the Pb-Sn case where density depends monotonically on temperature and composition, for Hg(1-x)Cd(x)Te there exists a critical value of the growth velocity above which plane-front solidification is unstable for all bulk CdTe mole fractions. Again, rotation leads to significant inhibition of onset. We identify the predicted stabilization with the Taylor-Proudman mechanism by which rotation inhibits thermal convection in a single-component fluid heated from below. In a binary liquid undergoing solidification, rotation inhibits the onset of buoyancy-driven convection, and has no effect on the short-wavelength morphological instability. At large growth velocities, the plane-front interface between liquid and solid becomes unstable with respect to a morphological instability and solidification occurs dendritically, with a mushy zone of dendrites and interdendritic fluid separating the solid from the melt. For the Pb-Sn system, rotation substantially suppresses the onset of convection in the mushy zone and in the overlying liquid, holding open the promise that rotation can suppress freckling and other macrosegregation defects.

Pearlstein, Arne J.↗

NASA NTRS1994

Convective flow effects on protein crystal growth

A high-resolution microscopic interferometric setup for the monitoring of protein morphologies has been developed. Growth or dissolution of a crystal can be resolved with a long-term depth resolution of 200 A and a lateral resolution of 2 microns. This capability of simultaneously monitoring the interfacial displacement with high local depth resolution has yielded several novel results. We have found with lysozyme that (1) the normal growth rate is oscillatory, and (2) depending on the impurity content of the solution, the growth step density is either greater or lower at the periphery of a facet than in its center. The repartitioning of Na plus and Cl minus ions between lysozyme solutions and crystals was studied for a wide range of crystallization conditions. A nucleation-growth-repartitioning model was developed, to interpret the large body of data in unified way. The results strongly suggest that (1) the ion to lysozyne ratio in the crystal depends mostly on kinetic rather than crystallographic parameters, and (2) lysozyme crystals possess a salt-rich core with a diameter electron microscopy results appear to confirm this finding, which could have far-reaching consequences for x-ray diffraction studies. A computational model for diffusive-convective transport in protein crystallization has been applied to a realistic growth cell geometry, taking into account the findings of the above repartitioning studies and our kinetics data for the growth of lysozyme. The results show that even in the small cell employed, protein concentration nonuniformities and gravity-driven solutal convection can be significant. The calculated convection velocities are of the same order to magnitude as those found in earlier experiments. As expected, convective transport, i.e., at Og, lysozyme crystal growth remains kinetically limited. The salt distribution in the crystal is predicted to be non-uniform at both 1g and 0g, as a consequence of protein depletion in the solution. Static and dynamic light scattering studies in undersaturated and supersaturated solutions have been performed. Diffusivities in undersaturated solutions, were found to vary with lysozyme concentrations. Depending on the salt concentration, the diffusivities either increase or decrease. Interestingly, the corresponding static scattering intensities behave oppositely, Our current analysis indicates that these changes are inconsistent with aggregation in undersaturated solutions. However, the data are compatible with concentration-dependent changes of the interactions between protein and salt.

Rosenberger, Franz↗

NASA NTRS1994

Control of oscillatory thermocapillary convection in microgravity

Laboratory and numerical experiments are underway to generate, and subsequently suppress, oscillatory thermocapillary convection in thin layer of silicone oil. The laboratory experiments have succeeded in characterizing the flow state in a limited range of Bond number-Marangoni number space of interest, identifying states of: (1) steady, unicellular, thermocapillary convection; (2) steady, multicellular, thermocapillary convection; and (3) oscillatory thermocapillary convection. Comparisons between experimental results and stability computations for a related basic state will be made.

Neitzel, G. Paul↗