SEARCH · Engineering Papers

Results for “CONCENTRATION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Nonintrusive fast response oxygen monitoring system for high temperature flows

A new technique has been developed for nonintrusive in situ measurement of oxygen concentration, gas temperature, and flow velocity of the test media in hypersonic wind tunnels. It is based on absorption of near-infrared radiation from inexpensive GaAlAs laser diodes used in optoelectronics industry. It is designed for simultaneous measurements along multiple lines of sight accessed by fiber optics. Molecular oxygen concentration is measured from the magnitude of absorption signals; rotational gas temperature is measured from the intensity ratio of two oxygen absorption lines; and the flow velocity is measured from the Doppler shift of the absorption line positions. This report describes the results of an extensive series of tests of the prototype instrument in laboratory flames emphasizing assessment of the instruments capabilities for quantitative measurement of O2 concentration (mole fraction) and gas temperature.

Oh, Daniel B.↗

NASA NTRS1993

Morphologic and morphometric studies of impact craters in the northern plains of Mars

Fresh impact craters in the northern plains of Mars display a variety of morphologic and morphometric properties. Ejecta morphologies range from radial to fluidized, interior features include central peaks and central pits, fluidized morphologies display a range of sinuosities, and depth-diameter ratios are being measured to determine regional variations. Studies of the martian northern plains over the past five years have concentrated in three areas: (1) determining correlations of ejecta morphologies with crater diameter, latitude, and underlying terrain; (2) determining variations in fluidized ejecta blanket sinuosity across the planet; and (3) measurement of depth-diameter ratios and determination of regional variations in this ratio.

Barlow, N. G.↗

NASA NTRS1981

Concentration of carbon monoxide in the upper stratosphere

The concentration of telluric carbon monoxide has been determined in the upper stratosphere from infrared solar spectra recorded by balloon in October 1978 and September 1979, over Texas. The average mixing ratios were found to be (2.1 plus or minus 3) x 10 to the -8th ppv and (3.7 plus or minus 0.4) x 10 the the -8th ppv above the float altitudes of 30.6 and 36.8 km, respectively. The concentration profile deduced from all the measurements indicates that the CO mixing ratio increases in the upper stratosphere, from (1 plus or minus 0.3) x 10 to the -8th ppv at 30.6 km, to about 4 x 10 to the -8th ppv above 41 km.

Zander, R.↗

DOE OSTI2021

Labile Fe(III) supersaturation controls nucleation and properties of product phases from Fe(II)-catalyzed ferrihydrite transformation

We report Fe(II)-catalyzed ferrihydrite (Fh) transformation to more crystalline iron (oxyhydr)oxide phases is a widely occurring geochemical process which has been extensively studied as a function of Fe(II)/Fh ratios at fixed Fh loadings. However, recent isolation of an intermediate Fe(III) species resulting from Fe(II)-Fh contact that facilitates transformation by dissolution/reprecipitation suggests that the kinetics and properties of product phases will instead depend mostly on its rate of accumulation to a critical concentration, consistent with principles in the classical nucleation theory (CNT). This suggests a dependence both on the loading of Fe(II) on the surface, which controls the rate of labile Fe(III) formation, as well as the available volume of solution, which also impacts how fast it can achieve its critical concentration to nucleate product phases. To specifically examine the latter effect, here we studied transformation of 15 mg Fh in 1 mM FeSO 4 solutions at pH 7.2 in batch suspensions of 30 mL, 150 mL, and 450 mL volumes. Time-dependent concentrations of aqueous Fe(II), surface-associated Fe(II), and resulting labile Fe(III) were monitored along with bulk solids characterization as a function of time. Transmission electron microscopy (TEM) was used to visualize the evolution of phases at identical locations on TEM grids. The collective results show that the rates of Fh loss and emergence of product lepidocrocite (Lp) and goethite (Gt) as well as their phase proportions, nucleation mode and morphological properties depend directly on the rate of accumulation of the labile Fe(III) precursor to its critical concentration, which in our experiments was controlled simply by varying the available volume of solution into which it enters. Statistical analyses of TEM image data suggest that while both heterogeneous and homogeneous nucleation occurred in all experiments, the former was increasingly favored at lower Fh/solution ratio due to its lower nucleation barrier being more favorable at attendant lower supersaturations of Fe(III).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Monte Carlo simulations of Cu/Ni–Si–Mn co-precipitation in duplex stainless steels

First-Passage Kinetic Monte Carlo (FPKMC) simulations of species migration in duplex stainless steels were performed in order to establish relationships between alloy content, segregation behavior, and the formation of Ni-Si-Mn rich particles in cast duplex stainless steels during thermal aging. The Ni-Si-Mn-rich second phase forms after extended aging at reactor operating temperatures and degrades alloy properties. Simulations of Ni-Si-Mn cluster formation were validated through comparison with experimental results obtained through Atom Probe Tomography (APT) on similar alloy compositions, identifying several trends. First, Cu promotes the formation of Ni-Si-Mn clusters, but only when Ni or Mn prefer segregation to the surface of Cu particles; without the segregation of these species, the critical composition for the clusters to form was not achieved. Second, the width of precipitate-denuded zones near ?/d interfaces increases with decreasing Cu content. This finding was in strong agreement with APT results, further validating our model. Finally, our model predicts that Ni-Si-Mn cluster formation will be the most extensive when the Si:Mn ratio is approximately 1:1 and the least extensive when one of these key elements is less concentrated (Mn = 0.5 at.% or Si = 0.5 at.%). The implications of these results on how to improve alloy properties are discussed.

Cu co-precipitation, Atom probe tomography (APT), ↗

NASA NTRS2019

Evaluation of Global Simulations of Aerosol Particle and Cloud Condensation Nuclei Number, with Implications for Cloud Droplet Formation

A total of 16 global chemistry transport models and general circulation models have participated in this study; 14 models have been evaluated with regard to their ability to reproduce the near-surface observed number concentration of aerosol particles and cloud condensation nuclei (CCN), as well as derived cloud droplet number concentration (CDNC). Model results for the period 2011-2015 are compared with aerosol measurements (aerosol particle number, CCN and aerosol particle composition in the submicron fraction) from nine surface stations located in Europe and Japan. The evaluation focuses on the ability of models to simulate the average across time state in diverse environments and on the seasonal and short-term variability in the aerosol properties. There is no single model that systematically performs best across all environments represented by the observations. Models tend to underestimate the observed aerosol particle and CCN number concentrations, with average normalized mean bias (NMB) of all models and for all stations, where data are available, of -24% and -35% for particles with dry diameters > 50 and > 120nm, as well as -36% and -34% for CCN at supersaturations of 0.2% and 1.0%, respectively. However, they seem to behave differently for particles activating at very low supersaturations (< 0.1%) than at higher ones. A total of 15 models have been used to produce ensemble annual median distributions of relevant parameters. The model diversity (defined as the ratio of standard deviation to mean) is up to about 3 for simulated N3 (number concentration of particles with dry diameters larger than 3 nm) and up to about 1 for simulated CCN in the extra-polar regions. A global mean reduction of a factor of about 2 is found in the model diversity for CCN at a supersaturation of 0.2% (CCN(0.2)) compared to that for N3, maximizing over regions where new particle formation is important. An additional model has been used to investigate potential causes of model diversity in CCN and bias compared to the observations by performing a perturbed parameter ensemble (PPE) accounting for uncertainties in 26 aerosol-related model input parameters. This PPE suggests that biogenic secondary organic aerosol formation and the hygroscopic properties of the organic material are likely to be the major sources of CCN uncertainty in summer, with dry deposition and cloud processing being dominant in winter. Models capture the relative amplitude of the seasonal variability of the aerosol particle number concentration for all studied particle sizes with available observations (dry diameters larger than 50, 80 and 120nm). The short-term persistence time (on the order of a few days) of CCN concentrations, which is a measure of aerosol dynamic behavior in the models, is underestimated on average by the models by 40% during winter and 20% in summer.

cloud droplets↗

DOE OSTI2020

Variation in sugarcane biomass composition and enzymatic saccharification of leaves, internodes and roots

The composition of biomass determines its suitability for different applications within a biorefinery system. The proportion of the major biomass fractions (sugar, cellulose, hemicellulose and lignin) may vary in different sugarcane genotypes and growth environments and different parts of the plant. This study investigated the composition of mature and immature internodes, roots and mature leaves of sugarcane. Internodes were found to have a significantly larger alcohol-soluble component than leaves and roots. The primary difference between the immature and mature internodes was the ratio of soluble sugars. In mature tissues, sucrose content was significantly higher, whereas in immature internodal tissues there was lower sucrose and heightened concentrations of reducing sugars. Carbon (C) partitioning in leaf tissues was characterised by low levels of soluble components and high “other” and cell wall fractions. Root tissue had low ratios of soluble fractions relative to their cell wall contents, indicating a lack of storage of soluble carbon. There was no significant difference in the ratio of the major cell wall fractions between the major organ types. Characterisation of individual non-cellulosic monomers indicated leaf and root tissues had significantly higher arabinose and galactose fractions. Significantly larger proportions of syringyl lignin compounds and the hydroxycinnamic compound, p-coumaric acid were observed in mature internodal tissues compared to the other tissue types. Tissue-specific differences in composition were shown to greatly affect the recalcitrance of the cell wall to enzymatic saccharification. Overall, this study displayed clear evidence of the differential partitioning of C throughout the sugarcane plant in specific organs. These organ-specific differences have major implications in their utility as a bioproduct feedstock. For example, the inclusion of trash (leaves) with the culms (internodes) may alter processing efficiency.

09 BIOMASS FUELS↗

NASA NTRS1983

Influence of peroxyacetyl nitrate (PAN) on odd nitrogen in the troposphere and lower stratosphere

Nonmethane hydrocarbon breakdown in the atmosphere produces aldehydes of which a fraction are transferred into peroxyacetyl nitrates (PAN) in the presence of NO and NO2. Since ethane is destroyed photochemically primarily above 1 km, PAN can be introduced into the upper troposphere and lower stratosphere without the need to be transported from the boundary layer where most hydrocarbons are destroyed and where PAN may be lost due to thermal decomposition and heterogeneous loss. Mixing ratios of ethane in the lower troposphere increase by a factor of 4-8 from equatorial to northern mid-latitudes. This difference is directly translatable into a PAN latitude gradient. At mid-latitudes the concentration of PAN below 20 km is 0.1 ppb comparable to and in some instances larger than predicted HO2NO2 mixing ratios. Like HO2NO2 and HNO3, PAN serves as a reservoir for odd nitrogen.

Aikin, A. C.↗

DOE OSTI2024

Volatile Organic Compounds and Meteorological Conditions in the Missouri Ozark AmeriFlux (MOFLUX) Site, 2023

This data set contains measurements of atmospheric components and meteorological conditions of central Missouri, United States during the summer of 2023. Data serve to examine the impact of meteorological conditions relevant to future climate on the emission and transformation of volatile organic compounds (VOCs). During the field campaign, researchers were also able to incorporate opportunistic analyses of the long-range transport of smoke plumes generated from extreme forest fire activities in Canada. VOC measurements were conducted at the Missouri Ozark AmeriFlux (MOFLUX) site (latitude 38.7441, longitude −92.2000) using a proton transfer reaction time of flight mass spectrometer (PTR-ToF-MS 6000 X2). The sampling campaign was conducted during the summer of 2023 (2023-06-25 to 2023-08-12) with measurements being taken at high temporal resolution (1 hour). Particular VOCs analyzed include: Methanol, Acetonitrile, Acetone, Isoprene, Methylvinyl ketone (MVK) and methacrolein (MACr), Benzene, Toluene, Catechol, and Monoterpene. Meteorological parameters included in this dataset were collected from a nearby Columbia Regional Airport (~10 km). Global solar radiation data were measured at a weather site in Ashland, MO, 5.22 km from the MOFLUX tower. The data were accessed using the MesoWest online website (https://mesowest.utah.edu/) provided by the Department of Atmospheric Sciences, University of Utah. Discussion of the data providers, database, and dissemination were highlighted in prior studies (Horel et al., 2002a; Horel et al., 2002b) . Smoke mixing ratios (in mg m−3) were estimated from the High-Resolution Rapid Refresh (HRRR) 3 km weather model for Missouri at 6-hour intervals (Dowell et al., 2022). This dataset contains three data files in comma separate (*.csv) format. Additional metadata are provided: three data dictionaries and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

Acetone↗

NASA NTRS1980

Nitrous oxide measurements in the eastern tropical Pacific Ocean

The paper considers nitrous oxide measurements in the eastern tropical Pacific Ocean. The concentration of N2O in the marine air showed a direct relationship to the N2O in the surface sea water, with the highest N2O mixing ratios over highly supersaturated regions; water samples were also collected down to depths of 300 m at seven hydrocast stations. The stations showed two distribution patterns for N2O concentration vs depth for the region between the surface and 300 m; two stations in the oxygen deficient region off the coast of Peru showed considerable N2O super-saturation at all depths, and results indicate that the role of N2O in the nitrogen cycle of the ocean may be more complex than previously suggested.

Pierotti, D.↗

NASA NTRS1976

The direct measurement of nitric oxide concentration in the upper atmosphere by a rocket-borne chemiluminescent detector

The paper describes a rocket-borne chemiluminescent NO detector and gives some NO mixing ratios in the altitude range from 42 to 60 km calculated on the basis of data obtained from this instrument. The mixing ratios were calculated from the observed counting rates on the assumption of a standard atmospheric pressure profile and the known vehicle velocity profile. The NO mixing ratio decreased from 4.2 billionths at 42 km to 2.2 billionths at 50 km, and then increased to 5.2 billionths at 60 km. The results are deemed accurate to within 20% and may be viewed as upper bounds on nitric oxide concentration in the absence of any NO loss processes.

Mason, C. J.↗

DOE OSTI2022

LaNi x Fe 1–x O 3 as flexible oxygen or carbon carriers for tunable syngas production and CO 2 utilization

The current study reports LaFe 1–x Ni x O 3–δ redox catalysts as flexible oxygen or carbon carriers for CO2 utilization and tunable production of syngas at relatively low temperatures (~700 °C), in the context of a hybrid redox process. Specifically, perovskite-structured LaFe 1–x Ni x O 3–δ with seven different compositions (x = 0.4–1) were prepared and investigated. Cyclic experiments under alternating methane and CO 2 flows indicated that all the samples exhibited favorable reactive performance: CH 4 and CO 2 conversions varied between 85% and 98% and 70–88%, respectively. While H 2 /CO ratio from Fe-rich redox catalysts was ~2.3:1 in the methane conversion step, Ni-rich catalysts produced a concentrated (~ 93.7 vol%) hydrogen stream via methane cracking. The flexibility of LaFe 1–x Ni x O 3–δ to produce syngas (or hydrogen) with tunable compositions was found to be governed by the iron/nickel (Fe/Ni) ratio. Redox catalysts with higher Fe contents act as a lattice oxygen carrier via chemical looping partial oxidation (CLPOx) of methane whereas those with higher Ni contents function as a carbon carrier via chemical looping methane cracking (CLMC) scheme. XRD analysis and temperature-programmed reactions revealed that both types of catalysts involve the formation of La 2 O 3 and Ni 0 /Ni-Fe phases under the methane environment. The ability to re-incorporate La 2 O 3 and Ni/Fe into a perovskite structure gives rise to oxygen-carrying capacity whereas stable Ni 0 or Ni/Fe phases would catalyze methane cracking without lattice oxygen exchange in the reaction cycles. Here, temperature programmed oxidation and Raman spectroscopy indicated the presence of graphitic and amorphous carbon species, which were effectively gasified by CO 2 to produce concentrated CO. Stability tests over LaFe 0.5 Ni 0.5 O 3 and LaNiO 3 revealed that the redox performance was stable over a span of 50 cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1986

Detection of stratospheric N2O5 by infrared remote sounding

Measurements of N2O5 absorption (1230 and 1260 per cm) in infrared spectra were carried out using the Atmospheric Trace Molecule Spectroscopy (ATMOS) instruments on board Spacelab 3. The detection of stratospheric N2O5, a temporary reservoir species whose photolysis products catalyze ozone destruction, was confirmed. Preliminary analysis of spectra recorded at sunrise on 1 May 1985 indicates a peak volume mixing ratio of 1.6 x 10 the -9th at 35 km an altitude of 35 km, or a broad concentration peak pf 4 x 10 to the 8th molecules per cu cm between 21 and 35 km. Absorption was not detected in spectra measured at sunset due to the depletion of N2O5 by photolysis during the day. The volume mixing ratio profile of N2O5 between 0 and 75 km altitude is reproduced in graphic form.

Toon, G. C.↗

DOE OSTI2023

Noble gas insights into early impact delivery and volcanic outgassing to Earth's atmosphere: A limited role for the continental crust

Earth's atmosphere, crust and mantle have evolved together through continuous geochemical exchange throughout Earth's history. Constraints on the transport of volatile elements and compounds between these reservoirs are crucial for understanding how Earth could have stayed habitable for extended periods of time. In this work, we present a new forward model of He, Ne and Ar in the mantle, crust and atmosphere. We explore concentrations of noble gases at the end of accretion, bulk silicate Earth K/U ratios, crustal growth scenarios, and upper mantle processing rates throughout Earth's history. We search for parameter combinations that simultaneously satisfy observational constraints on present-day mantle 4 He/ 3 He and 40 Ar/ 36 Ar (sensitive to mantle outgassing and continental crust growth, which depletes the mantle of U, Th and K), atmospheric 20 Ne/ 22 Ne (which tracks the mix of outgassed vs. delivered Ne in the atmosphere), and atmospheric 40 Ar/ 36 Ar in the past and today (sensitive to volatile delivery, mantle outgassing and crustal growth). Leveraging this intertwined set of noble gas abundances and isotopic compositions yields new constraints on initial noble gas abundances in the mantle and on the proportions of atmospheric volatiles originating from delivery by impact degassing, mantle outgassing, and degassing of the continental crust. We find that atmospheric Ar isotopic evolution is primarily sensitive to the mantle processing rate history; the atmospheric Ar isotopic record should therefore not be used to reconstruct continental crust growth, but instead provides valuable insights into mantle processing rates. Our model predicts a measurably low 20 Ne/ 22 Ne ratio of ~9.7 in Archean atmospheric samples. Most of atmospheric primordial 36 Ar was directly delivered by chondritic bodies and not transferred to the atmosphere during an intense early episode of mantle outgassing. Nitrogen delivered by impact degassing could account for the present-day atmospheric nitrogen inventory.

58 GEOSCIENCES↗

DOE OSTI2021

A comparative study of machine learning models for predicting the state of reactive mixing

Mixing phenomena are important mechanisms controlling flow, species transport, and reaction processes in fluids and porous media. Accurate predictions of reactive mixing are critical for many Earth and environmental science problems such as contaminant fate and remediation, macroalgae growth, and plankton biomass evolution. Here, to investigate the evolution of mixing dynamics under different scenarios (e.g., anisotropy, fluctuating velocity fields), a finite-element-based numerical model was built to solve the fast, irreversible bimolecular reaction-diffusion equations to simulate a range of reactive-mixing scenarios. A total of 2,315 simulations were performed using different sets of model input parameters comprising various spatial scales of vortex structures in the velocity field, time-scales associated with velocity oscillations, the perturbation parameter for the vortex-based velocity, anisotropic dispersion contrast (i.e., ratio of longitudinal-to-transverse dispersion), and molecular diffusion. The outputs comprised concentration profiles of reactants and products. The inputs to and outputs from these simulations were concatenated into feature and label matrices, respectively, to train 20 different machine learning (ML) models intended to emulate system behavior. These 20 ML emulators, based on linear methods, Bayesian methods, ensemble learning methods, and multilayer perceptrons (MLPs), were trained to classify the state of mixing and predict three quantities of interest (QoIs) characterizing species production, decay (i.e., average concentration, square of average concentration), and degree of mixing (i.e., variances of species concentration). Unsurprisingly, linear classifiers and regressors failed to reproduce the QoIs; however, ensemble methods (classifiers and regressors) and the MLP model accurately classified the state of reactive mixing and the QoIs. Among ensemble methods, random forest and decision-tree-based AdaBoost faithfully predicted the QoIs. At run time, trained ML emulators produced results times faster than the finite-element simulations. Due to their low computational expense and high accuracy, ensemble and MLP models are excellent emulators for these numerical simulations and great utilities in uncertainty quantification exercises, which can require 1,000s of forward model runs.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Redox effects on the structure and properties of Na-Mo-Fe-phosphate glasses

Na-Mo-Fe-phosphate glasses were prepared with reducing and oxidizing raw materials and the effects of the different Fe 2+ /Fe 3+ and Mo 5+ /Mo 6+ ratios on glass structure and properties were determined. Mssbauer spectroscopy confirms significantly greater concentrations of Fe 2+ ions in the reduced glasses and distorted Fe 3+ O 4 sites preferred over the Fe 3+ O 6 sites in the oxidized glasses. Raman spectroscopy reveals the presence of isolated Mo 6+ O 6 sites in the oxidized glasses, and highly distorted Mo 5+ O 5 sites in reduced Mo-rich glasses. The presence of specific Fe- and Mo-polyhedra is correlated with the average phosphate anion length, as characterized by high-pressure liquid chromatography. Generally, for the similar compositions, oxidized glasses have greater molar volumes than the reduced glasses, associated with the formation of isolated Mo 6+ O 6 octahedra and the absence of highly crosslinked Mo 5+ OPO 4 units. Tg increases with increasing Fe 3+ fractions in the Fe-rich glasses, whereas for the Mo-rich glasses, T g increases with greater Mo 5+ fractions.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Removal of Antibiotics from Swine Wastewater Using an Environmentally Friendly Biochar: Performance and Mechanisms

Antibiotics used in the swine industry to treat diseases and improve animal growth are poorly absorbed by swine and have been classified as micropollutants due to their occurrence in surface water, wastewater, and soil. This study investigated the capacity of biochar produced from eastern red cedar to remove target antibiotics that have been extensively used in the swine industry. Biochar was produced by pyrolysis from eastern red cedar at 450 °C. The sorption tests were performed by mixing biochar and a solution (1:10 ratio) containing each antibiotic in 100, 300, 600, and 900 μg L –1 concentrations. The results indicate that red cedar biochar was able to effectively remove up to 99.93% tetracycline, 96.23% oxytetracycline, 98.28% chlortetracycline, 76.4% sulfadiazine, and 78.6% sulfamethazine at the lowest concentrations. The removal efficiencies at higher concentrations declined up to 83.52, 47.23, 64.16, 69.8, and 58.4% for tetracycline, oxytetracycline, chlortetracycline, sulfadiazine, and sulfamethazine, respectively. The biochar exhibited stronger adsorption capacity for chlortetracycline and sulfamethazine compared to the other antibiotics. The likely adsorption mechanisms driving the removal of tetracyclines and sulfonamides are hydrogen-bonding and π–π electron-donor–acceptor, supported by FTIR analyses of the biochar itself. Overall, the results highlighted the potential utilization of eastern red cedar biochar for practical applications, mitigating antibiotic residues from swine wastewater in a cost-effective and environmentally friendly manner due to its relatively low pyrolysis temperature (450 °C) and sustainable repurposing of an invasive tree species.

09 BIOMASS FUELS↗

DOE OSTI2024

Calcium has a direct effect on thick filament activation in porcine myocardium

Sarcomere activation in striated muscle requires both thin filament–based and thick filament–based activation mechanisms. Recent studies have shown that myosin heads on the thick filaments undergo OFF to ON structural transitions in response to calcium (Ca2+) in permeabilized porcine myocardium in the presence of a small molecule inhibitor that eliminated active force. The changes in X-ray diffraction signatures of OFF to ON transitions were interpreted as Ca2+ acting to activate the thick filaments. Alternatively, Ca2+ binding to troponin could initiate a Ca2+-dependent crosstalk from the thin filament to the thick filament via interfilament connections such as the myosin binding protein-C. Here, we exchanged native troponin in permeabilized porcine myocardium for troponin containing the cTnC D65A mutation, which disallows the activation of troponin through Ca2+ binding to determine if Ca2+-dependent thick filament activation persists in the absence of thin filament activation. After the exchange protocol, over 95% of the Ca2+-activated force was eliminated. Equatorial intensity ratio increased significantly in both WT and D65A exchanged myocardium with increasing Ca2+ concentration. The degree of helical ordering of the myosin heads decreased by the same amount in WT and D65A myocardium when Ca2+ concentration increased. These results are consistent with a direct effect of Ca2+ in activating the thick filament rather than an indirect effect due to Ca2+-mediated crosstalk between the thick and thin filaments.

Physiology↗