Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLIMATE MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Spanning the Gap From Bulk to Bin: A Novel Spectral Microphysics Method

Microphysics methods for climate models and numerical weather prediction typically track one, two, or three moments of a droplet size distribution for various categories of liquid, ice, and aerosol. Such methods rely on conversion parameters between these categories, which introduces uncertainty into predictions. While higher-fidelity options such as bin and Lagrangian schemes exist, they require too many degrees of freedom for climate modeling applications and introduce numerical challenges. Here we introduce a flexible spectral microphysics method based on collocation of basis functions. This method generalizes to a linear bulk scheme when using few basis functions and to a smoothed bin scheme with more degrees of freedom. Tested in an idealized box setting, the method improves spectral accuracy for droplet collision-coalescence and may eliminate the need for precipitation autoconversion rates required by bulk methods; furthermore, it generalizes well to multimodal distributions with less complexity than a bin method. The potential to extend this collocation representation to multiple hydrometeor classes suggests a path forward to unify liquid, ice, and aerosol microphysics in a single, flexible, computational framework for climate modeling.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2014

Reply to Comment by Laprise on 'the Added Value to Global Model Projections of Climate Change by Dynamical Downscaling: a Case Study over the Continental U.S. Using the GISS-ModelE2 and WRF Models'

In his comment, Laprise raises several points that we agree merit consideration. His primary critique is that our study [Racherla et al., 2012] tested the ability of the WRF regional climate model to reproduce historical temperature and precipitation change relative to the driving global climate model (GCM) using only a single simulation rather than an ensemble. He asserts that the observed changes are smaller than the internal variability in the climate system (i.e., not statistically significant) and that thus a single simulation should not necessarily be able to capture the observations. Laprise points out that the statistical signal is reduced for a multi-decadal trend such as the one we analyzed in comparison with mean climatology and cites two studies showing that for particular climate parameters it can take any years for a signal to be discerned over internal variability. He states that The results of theexperiment as designed were strongly influenced by the presence of internal variability and sampling errors,which masked the rather small climate changes that may have occurred as a consequence of changes inforcing during the period considered. While Laprise discusses statistics in general terms at some length, for the actual climate trends examined in our study, he offers no evidence that the forced signal was smallcompared with internal variability. The two studies he cites [de Ela et al., 2013; Maraun, 2013] do not provide convincing evidence as they concern climate variables averaged over different times and areas. One in fact examines extreme precipitation events, which by definition are rare and thus have a lower significance level. We accept the general point that it is important to consider internal variability, and as noted in our paper we agree that an ensemble of simulations is in principle an optimal, though computationally expensive, approach. While we did not present the statistical significance of the observations in our original paper, we have now evaluated those for the regional temperature trends used in our study to evaluate the added value of WRF and thus can analyze data as to the magnitude of the trends with respect to internal variability.

climate↗
NASA NTRS2002

Defining Top-of-Atmosphere Flux Reference Level for Earth Radiation Budget Studies

To estimate the earth's radiation budget at the top of the atmosphere (TOA) from satellite-measured radiances, it is necessary to account for the finite geometry of the earth and recognize that the earth is a solid body surrounded by a translucent atmosphere of finite thickness that attenuates solar radiation differently at different heights. As a result, in order to account for all of the reflected solar and emitted thermal radiation from the planet by direct integration of satellite-measured radiances, the measurement viewing geometry must be defined at a reference level well above the earth s surface (e.g., 100 km). This ensures that all radiation contributions, including radiation escaping the planet along slant paths above the earth s tangent point, are accounted for. By using a field-of- view (FOV) reference level that is too low (such as the surface reference level), TOA fluxes for most scene types are systematically underestimated by 1-2 W/sq m. In addition, since TOA flux represents a flow of radiant energy per unit area, and varies with distance from the earth according to the inverse-square law, a reference level is also needed to define satellite-based TOA fluxes. From theoretical radiative transfer calculations using a model that accounts for spherical geometry, the optimal reference level for defining TOA fluxes in radiation budget studies for the earth is estimated to be approximately 20 km. At this reference level, there is no need to explicitly account for horizontal transmission of solar radiation through the atmosphere in the earth radiation budget calculation. In this context, therefore, the 20-km reference level corresponds to the effective radiative top of atmosphere for the planet. Although the optimal flux reference level depends slightly on scene type due to differences in effective transmission of solar radiation with cloud height, the difference in flux caused by neglecting the scene-type dependence is less than 0.1%. If an inappropriate TOA flux reference level is used to define satellite TOA fluxes, and horizontal transmission of solar radiation through the planet is not accounted for in the radiation budget equation, systematic errors in net flux of up to 8 W/sq m can result. Since climate models generally use a plane-parallel model approximation to estimate TOA fluxes and the earth radiation budget, they implicitly assume zero horizontal transmission of solar radiation in the radiation budget equation, and do not need to specify a flux reference level. By defining satellite-based TOA flux estimates at a 20-km flux reference level, comparisons with plane-parallel climate model calculations are simplified since there is no need to explicitly correct plane-parallel climate model fluxes for horizontal transmission of solar radiation through a finite earth.

Loeb, N. G.↗
NASA NTRS2012

The Connection between Model Performance on the CCMVal Transport Diagnostics and Simulated Sensitivity of Ozone to Chlorine Change

The chemistry climate models that contributed simulations for past and future ozone evolution to the 2010 Scientific Assessment of Ozone Depletion were subject to extensive evaluation by the SPARC (Stratospheric Processes and their Role in Climate) CCMVal (Chemistry-Climate Model Validation) activity. The sensitivity of ozone to changes in composition and climate varies among the models, but the relationship between these variations and the model evaluations of CCMVal is not obvious. We have learned that the transport evaluation can be used to interpret the comparisons between observed and simulated columns of chlorine reservoirs, hydrochloric acid (HCl) and chlorine nitrate (ClONO2); these comparisons were part of the CCMVal evaluation of chemistry. The simulations with best performance on the transport diagnostics most faithfully reproduce the evolution and seasonal variation of the chlorine reservoirs as observed at NDACC (Network for Detection of Atmospheric Composition Change) stations (NyAlesund 78.9N, Kiruna 67.8N, Harestua 60.2N, Jungfraujoch 46.6N, Toronto 43.6N, Kitt Peak 31.9N, Izana 28.3N, Mauna Loa 19.5N, Lauder 45S and Arrival Heights 77.8S). In the simulations, the HCl in the lower stratosphere depends on total inorganic chlorine (Cly) and partitioning between HCl and ClON02. Total inorganic chlorine depends on the fractional release of chlorine from source gases, and ratio of ClON02 to HCl is inversely dependent on methane and varies quadratically with ozone. Simulated HCl from various models may agree with observations even though Cly is in error, partitioning is in error, or both. Simulated ozone sensitivity to chlorine is shown to be greater for models that produce larger values of chlorine nitrate for background chlorine levels, and vice versa. Comparisons with the NDACC data show why the models with 'best' transport have similar sensitivity to chlorine change. The realistic evolution of the simulated HCl and ClONO2 columns suggests realistic levels of Cly in the lower atmosphere. In addition, the wide range values for the sensitivity of ozone to chlorine obtained from the CCMVal simulations is explained by the wide range in lower atmospheric columns of ClONO2 and the concomitant wide range of levels for chlorine monoxide.

Douglass, Anne↗
DOE OSTI2024

Improving Stratocumulus Cloud Amounts in a 200‐m Resolution Multi‐Scale Modeling Framework Through Tuning of Its Interior Physics

Abstract High‐Resolution Multi‐scale Modeling Frameworks (HR)—global climate models that embed separate, convection‐resolving models with high enough resolution to resolve boundary layer eddies—have exciting potential for investigating low cloud feedback dynamics due to reduced parameterization and ability for multidecadal throughput on modern computing hardware. However low clouds in past HR have suffered a stubborn problem of over‐entrainment due to an uncontrolled source of mixing across the marine subtropical inversion manifesting as stratocumulus dim biases in present‐day climate, limiting their scientific utility. We report new results showing that this over‐entrainment can be partly offset by using hyperviscosity and cloud droplet sedimentation. Hyperviscosity damps small‐scale momentum fluctuations associated with the formulation of the momentum solver of the embedded large eddy simulation. By considering the sedimentation process adjacent to default one‐moment microphysics in HR, condensed phase particles can be removed from the entrainment zone, which further reduces entrainment efficiency. The result is an HR that can produce more low clouds with a higher liquid water path and a reduced stratocumulus dim bias. Associated improvements in the explicitly simulated sub‐cloud eddy spectrum are observed. We report these sensitivities in multi‐week tests and then explore their operational potential alongside microphysical retuning in decadal simulations at operational 1.5° exterior resolution. The result is a new HR having desired improvements in the baseline present‐day low cloud climatology, and a reduced global mean bias and root mean squared error of absorbed shortwave radiation. We suggest it should be promising for examining low cloud feedbacks with minimal approximation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Near-term tropical cyclone risk and coupled Earth system model biases

Most current climate models predict that the equatorial Pacific will evolve under greenhouse gas–induced warming to a more El Niño-like state over the next several decades, with a reduced zonal sea surface temperature gradient and weakened atmospheric Walker circulation. Yet, observations over the last 50 y show the opposite trend, toward a more La Niña-like state. Recent research provides evidence that the discrepancy cannot be dismissed as due to internal variability but rather that the models are incorrectly simulating the equatorial Pacific response to greenhouse gas warming. This implies that projections of regional tropical cyclone activity may be incorrect as well, perhaps even in the direction of change, in ways that can be understood by analogy to historical El Niño and La Niña events: North Pacific tropical cyclone projections will be too active, North Atlantic ones not active enough, for example. Other perils, including severe convective storms and droughts, will also be projected erroneously. While it can be argued that these errors are transient, such that the models’ responses to greenhouse gases may be correct in equilibrium, the transient response is relevant for climate adaptation in the next several decades. Given the urgency of understanding regional patterns of climate risk in the near term, it would be desirable to develop projections that represent a broader range of possible future tropical Pacific warming scenarios—including some in which recent historical trends continue—even if such projections cannot currently be produced using existing coupled earth system models.

Science & Technology - Other Topics↗
DOE OSTI2021

Evolving CO 2 rather than SST leads to a factor of ten decrease in GCM convergence time

The high computational cost of Global Climate Models (GCMs) is a problem that limits their use in many areas. Recently an inverse climate modeling (InvCM) method, which fixes the global mean sea surface temperature (SST) and evolves the CO 2 mixing ratio to equilibrate climate, has been implemented in a cloud resolving model. In this paper, we apply InvCM to ExoCAM GCM aquaplanet simulations, allowing the SST pattern to evolve while maintaining a fixed global-mean SST. We find that InvCM produces the same climate as normal slab-ocean simulations but converges an order of magnitude faster. We then use InvCM to calculate the equilibrium CO 2 for SSTs ranging from 290 K to 340 K at 1 K intervals and reproduce the large increase in climate sensitivity at an SST of about 315 K at much higher temperature resolution. The speedup provided by InvCM could be used to equilibrate GCMs at higher spatial resolution or to perform broader parameter space exploration in order to gain new insight into the climate system. Additionally, InvCM could be used to find unstable and hidden climate states, and to find climate states close to bifurcations such as the runaway greenhouse transition.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

Impacts of Soil-aquifer Heat and Water Fluxes on Simulated Global Climate

Climate models have traditionally only represented heat and water fluxes within relatively shallow soil layers, but there is increasing interest in the possible role of heat and water exchanges with the deeper subsurface. Here, we integrate an idealized 50m deep aquifer into the land surface module of the GISS ModelE general circulation model to test the influence of aquifer-soil moisture and heat exchanges on climate variables. We evaluate the impact on the modeled climate of aquifer-soil heat and water fluxes separately, as well as in combination. The addition of the aquifer to ModelE has limited impact on annual-mean climate, with little change in global mean land temperature, precipitation, or evaporation. The seasonal amplitude of deep soil temperature is strongly damped by the soil-aquifer heat flux. This not only improves the model representation of permafrost area but propagates to the surface, resulting in an increase in the seasonal amplitude of surface air temperature of >1K in the Arctic. The soil-aquifer water and heat fluxes both slightly decrease interannual variability in soil moisture and in landsurface temperature, and decrease the soil moisture memory of the land surface on seasonal to annual timescales. The results of this experiment suggest that deepening the modeled land surface, compared to modeling only a shallower soil column with a no-flux bottom boundary condition, has limited impact on mean climate but does affect seasonality and interannual persistence.

soil↗
DOE OSTI2017

Modeling the climate impacts of deploying solar reflective cool pavements in California cities

Solar reflective “cool pavements” have been proposed as a potential heat mitigation strategy for cities. However, previous research has not systematically investigated the extent to which cool pavements could reduce urban temperatures. In this study we investigated the climate impacts of widespread deployment of cool pavements in California cities. Using the Weather Research and Forecasting model, we simulated the current climate of California at 4 km spatial resolution. Comparing this simulation to 105 weather stations in California suggested an overall mean bias (model minus observation) of -0.30°C. Widespread pavement albedo increases of 0.1 and 0.4 in California cities were then simulated. Comparing temperature reductions for each scenario showed that the climate response to pavement albedo modification was nearly linear. Temperature reductions at 14:00 local standard time were found to be 0.32°C per 0.1 increase in grid cell average albedo. Temperature reductions were found to peak in the late morning and evening when (a) boundary layer heights were low and (b) solar irradiance (late morning) and heat accumulation in the pavement (evening) was high. Temperature reductions in summer were found to exceed those in winter, as expected. After scaling the results using realistic data-derived urban canyon morphologies and an off-line urban canyon albedo model, annual average surface air temperature reductions from increasing pavement albedo by 0.4 ranged from 0.18°C (Palm Springs) to 0.86°C (San Jose). We note the variation among cities was due to differences in baseline climate, size of the city, urban fraction, and urban morphology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

To Exascale and Beyond—The Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM), a Performance Portable Global Atmosphere Model for Cloud-Resolving Scales

The new generation of heterogeneous CPU/GPU computer systems offer much greater computational performance but are not yet widely used for climate modeling. One reason for this is that traditional climate models were written before GPUs were available and would require an extensive overhaul to run on these new machines. In addition, even conventional “high–resolution” simulations don't currently provide enough parallel work to keep GPUs busy, so the benefits of such overhaul would be limited for the types of simulations climate scientists are accustomed to. The vision of the Simple Cloud-Resolving Energy Exascale Earth System (E3SM) Atmosphere Model (SCREAM) project is to create a global atmospheric model with the architecture to efficiently use GPUs and horizontal resolution sufficient to fully take advantage of GPU parallelism. After 5 years of model development, SCREAM is finally ready for use. In this paper, we describe the design of this new code, its performance on both CPU and heterogeneous machines, and its ability to simulate real-world climate via a set of four 40 day simulations covering all 4 seasons of the year.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Chemical Feedback From Decreasing Carbon Monoxide Emissions

Understanding changes in the burden and growth rate of atmospheric methane (CH 4 ) has been the focus of several recent studies but still lacks scientific consensus. Here we investigate the role of decreasing anthropogenic carbon monoxide (CO) emissions since 2002 on hydroxyl radical (OH) sinks and tropospheric CH 4 loss. We quantify this impact by contrasting two model simulations for 2002–2013: (1) a Measurement of the Pollution in the Troposphere (MOPITT) CO reanalysis and (2) a Control-Run without CO assimilation. These simulations are performed with the Community Atmosphere Model with Chemistry of the Community Earth System Model fully coupled chemistry climate model with prescribed CH 4 surface concentrations. The assimilation of MOPITT observations constrains the global CO burden, which significantly decreased over this period by ~20%. We find that this decrease results to (a) increase in CO chemical production, (b) higher CH 4 oxidation by OH, and (c) ~8% shorter CH 4 lifetime. As a result, we elucidate this coupling by a surrogate mechanism for CO-OH-CH 4 that is quantified from the full chemistry simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Evaluation of Autoconversion Representation in E3SMv2 Using an Ensemble of Large-Eddy Simulations of Low-Level Warm Clouds

In numerical atmospheric models that treat cloud and rain droplet populations as separate condensate categories, precipitation initiation in warm clouds is often represented by an autoconversion rate (Au), which is the rate of formation of new rain droplets through the collisions of cloud droplets. Being a function of the cloud droplet size distribution (DSD), the local Au is commonly parameterized as a function of DSD moments: cloud droplet number (n c ) and mass (q c ) concentrations. When applied in a large-scale model, the grid-mean Au must also include a correction, or enhancement factor, to account for the horizontal variability of the cloud properties across the model grid. In this study, we evaluate the Au representation in the Energy Exascale Earth System Model version 2 (E3SMv2) climate model using large-eddy simulations (LES), which explicitly resolve cloud droplet spectra, and therefore the local Au, as well as its spatial variability. The analysis of an ensemble of warm low-level cloud cases shows that the E3SMv2 formulation represents the Au reasonably well compared to the horizontally averaged explicitly computed rate from LES. The agreement, however, comes from a combination of an underestimated E3SM-tuned local Au rate and an overestimated subgrid cloud variability enhancement factor. The latter bias is traced to neglecting the horizontal variability of n c and its co-variability with q c in parameterizing the grid-mean Au.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Using ARM Observations to Evaluate Process-Interactions in MCS Simulations Across Scales (Final Progress Report)

This project, funded by DOE Atmospheric System Research (DE-SC0020050), focused on improving the representation of mesoscale convective systems (MCSs) in numerical weather and climate models by leveraging high-resolution observations from the DOE Atmospheric Radiation Measurement (ARM) program. The research aimed to evaluate model sensitivities to grid spacing, microphysics, and planetary boundary layer (PBL) schemes, with a particular emphasis on improving convection parameterization for high-resolution modeling. Findings from this work highlight several key advancements. Model validation against ARM radar wind profiler data from the Southern Great Plains (SGP) and Manaus (MAO) sites revealed systematic biases in simulated convective mass flux profiles, leading to the development of an observationally constrained evaluation framework for diagnosing and improving model performance. Sensitivity analyses demonstrated that the representation of Amazonian MCSs was highly dependent on PBL scheme selection, while mid-latitude MCSs were more strongly influenced by microphysics parameterizations. A series of high-resolution WRF simulations, ranging from 4 km to 125 m grid spacing, provided insight into the behavior of convective drafts across scales. While updraft properties converged at sub-kilometer resolutions, biases in downdraft intensity persisted even at the finest resolution tested, emphasizing the need for further refinements in model physics. Additionally, comparisons of MCS vertical structures between mid-latitude and tropical environments revealed stronger updrafts and larger mass flux in mid-latitude MCSs, providing critical insights for improving climate model representations of storm-scale dynamics. The project’s findings have already contributed to advancing numerical modeling capabilities, particularly in WRF, MPAS, ICON, and DOE’s SCREAM model, by refining how convective processes are represented in high-resolution climate simulations. Results were disseminated through peer-reviewed publications, conference presentations, and ARM/ASR Research Highlights, engaging the broader scientific community. The project also provided valuable training opportunities for two postdoctoral researchers, who played central roles in model development, analysis, and dissemination of results. Their work contributed to several publications and conference presentations, helping prepare them for careers in atmospheric modeling. By improving the simulation of MCSs, this research directly supports the development of next-generation climate models capable of more accurately representing extreme precipitation and convective processes. The insights gained will inform future improvements in convective parameterization and guide the design of high-resolution weather and climate simulations, ultimately enhancing the reliability of climate projections and weather forecasts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

Connections Between the Spring Breakup of the Southern Hemisphere Polar Vortex, Stationary Waves, and Air-sea Roughness

A robust connection between the drag on surface-layer winds and the stratospheric circulation is demonstrated in NASA's Goddard Earth Observing System Chemistry-Climate Model (GEOSCCM). Specifically, an updated parameterization of roughness at the air-sea interface, in which surface roughness is increased for moderate wind speeds (4ms to 20ms), leads to a decrease in model biases in Southern Hemispheric ozone, polar cap temperature, stationary wave heat flux, and springtime vortex breakup. A dynamical mechanism is proposed whereby increased surface roughness leads to improved stationary waves. Increased surface roughness leads to anomalous eddy momentum flux convergence primarily in the Indian Ocean sector (where eddies are strongest climatologically) in September and October. The localization of the eddy momentum flux convergence anomaly in the Indian Ocean sector leads to a zonally asymmetric reduction in zonal wind and, by geostrophy, to a wavenumber-1 stationary wave pattern. This tropospheric stationary wave pattern leads to enhanced upwards wave activity entering the stratosphere. The net effect is an improved Southern Hemisphere vortex: the vortex breaks up earlier in spring (i.e., the spring late-breakup bias is partially ameliorated) yet is no weaker in mid-winter. More than half of the stratospheric biases appear to be related to the surface wind speed biases. As many other chemistry climate models use a similar scheme for their surface layer momentum exchange and have similar biases in the stratosphere, we expect that results from GEOSCCM may be relevant for other climate models.

air-sea interaction↗
DOE OSTI2022

Integrated hydrological, power system and economic modelling of climate impacts on electricity demand and cost

Impacts of climate-related water stress and temperature changes can cascade through energy systems, although models have yet to capture this compounding of effects. Here, we employ a coupled water–power–economy model to capture these important interactions in a study of the exceedance of water temperature thresholds for power generation in the western United States. We find that not all reductions in reserve electricity-generation capacity result in impacts, and that when they occur, intermittent interruptions in electricity supply at critical times of the day, week and year account for much of the economic impacts. Finally, we find that impacts may be in different locations from the original water stress. Herein, we estimate that the consumption loss can be up to 0.3% annually and the drivers identified in coupled modelling can increase the average cost of electricity by up to 3%. Integrated models will be needed to capture the cascading effects of climate change through climatic, water, energy and economic systems. Webster et al. now develop a coupled hydrologic–power-production–economic model to estimate water-stress impacts on electricity cost.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Projected changes in extreme rainfall and temperature events and possible implications for Cameroon's socio-economic sectors

Extreme events like flooding, droughts and heatwave are among the factors causing huge socio-economic losses to Cameroonians. Investigating the potential response of rainfall and temperature extremes to global warming is therefore critically needed for tailoring and adjusting the country's policies. Recent datasets have been developed for this purpose within the Coordinated Output for Regional Evaluations (CORDEX-CORE) initiative, at ~25 km grid spacing. These regional climate models were used to dynamically downscaled four global climate models participating in the Coupled Model Intercomparison Project phase 5 (CMIP5), under the optimistic and pessimistic representative concentration pathways (RCPs) 2.6 and 8.5, respectively. These models were employed in this study for characterizing the response of Cameroon's extreme precipitation and temperature events to global warming, using seven indices defined by the Expert Team on Cli mate Change Detection and Indices. Under global warming, the maximum number of consecutive dry (wet) days' is expected to increase (decrease). However, the annual total rainfall amount is expected to increase, mainly due to the intensification of very wet days and daily rainfall intensity. Furthermore, the temperature-based indices reveal an increase (decrease) in the total annual hot (cold) days, and overall, changes intensify with increased radiative forcing. The high-mitigated low-emission pathway RCP2.6 features attenuated changes, and even sometimes adapts to reverse the sign of changes. Designing reliable policies to limit the risks associated with the above changes is required, as their socio-economic consequences are likely to include food insecurity, heat-related illness, population impoverishment, price rises and market instability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Potential Effects of Climate Change and Solar Radiation Modification on Renewable Energy Resources

Solar radiation modification (SRM) is a possible deliberate approach to decrease or reflect incoming solar radiation with the goal of reducing global temperatures, which have increased over the last decades due to high atmospheric greenhouse gas concentrations. Stratospheric aerosol injection, specifically, has shown potential for successfully reducing global temperatures in climate model simulations. Despite the growing literature in the areas of climate change and SRM, their combined effects on renewable energy generation, a climate change mitigation strategy, have not been addressed. In this review paper, we synthesize previous literature on the possible effects of climate change and SRM on renewable energy resources (i.e., wind energy, solar energy, biomass energy, and hydropower), review the status of climate change and SRM research, and explore potential effects of SRM on renewable energy primarily in the Continental United States (CONUS), but with global perspectives as well. We discuss the research challenges and impacts of SRM on renewable energy and conclude by discussing the potential implications of SRM for renewables for SRM governance and policy. This work is not advocating for or against SRM. It is highlighting an important potential impact for future decision makers.

Kumler, Andrew [National Renewable Energy Laborato↗
DOE OSTI2021

ISMIP6-based projections of ocean-forced Antarctic Ice Sheet evolution using the Community Ice Sheet Model

Abstract. The future retreat rate for marine-based regions of the Antarctic Ice Sheet is one of the largest uncertainties in sea-level projections. The Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6) aims to improve projections and quantify uncertainties by running an ensemble of ice sheet models with atmosphere and ocean forcing derived from global climate models. Here, the Community Ice Sheet Model (CISM) is used to run ISMIP6-based projections of ocean-forced Antarctic Ice Sheet evolution. Using multiple combinations of sub-ice-shelf melt parameterizations and calibrations, CISM is spun up to steady state over many millennia. During the spin-up, basal friction parameters and basin-scale thermal forcing corrections are adjusted to optimize agreement with the observed ice thickness. The model is then run forward for 550 years, from 1950–2500, applying ocean thermal forcing anomalies from six climate models. In all simulations, the ocean forcing triggers long-term retreat of the West Antarctic Ice Sheet, especially in the Filchner–Ronne and Ross sectors. Mass loss accelerates late in the 21st century and then rises steadily for several centuries without leveling off. The resulting ocean-forced sea-level rise at year 2500 varies from about 150 to 1300 mm, depending on the melt scheme and ocean forcing. Further experiments show relatively high sensitivity to the basal friction law, moderate sensitivity to grid resolution and the prescribed collapse of small ice shelves, and low sensitivity to the stress-balance approximation. The Amundsen sector exhibits threshold behavior, with modest retreat under many parameter settings but complete collapse under some combinations of low basal friction and high thermal forcing anomalies. Large uncertainties remain, as a result of parameterized sub-shelf melt rates, simplified treatments of calving and basal friction, and the lack of ice–ocean coupling.

54 ENVIRONMENTAL SCIENCES↗