Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alternative Relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Environmentally Friendly Corrosion Preventative Compounds for Ground Support Structures

The need to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based Corrosion Preventive Compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. CPCs are used as temporary protective coatings and must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different oily film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing. The results for the fifteen CPC systems are presented in this paper.

Montgomery Eliza L.↗
DOE OSTI2026

Challenges and Considerations for Rural Transportation: Stakeholder Perspectives

This fact sheet presents key findings and challenges identified by stakeholders through an initiative supported by the U.S. Department of Energy's Communities Local Energy Action Program (Communities LEAP). The project engaged community stakeholders, fleet operators, and local officials across ten rural counties in western Alabama to explore opportunities for expanding access to alternative transportation fuels. Guided by a regional coalition and supported by the National Laboratory of the Rockies (NLR), the effort emphasized challenges and related potential technical solutions. The fact sheet highlights transportation priorities identified by participants, outlines barriers unique to rural contexts, and summarizes resources developed by NLR subject matter experts to help local entities address these challenges.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2005

Microwave and Millimeter Wave Imaging Using Synthetic Aperture Focusing and Holographical Techniques

Microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods have shown great potential for determining material composition in composite structures, determining material thickness or debond thickness between two layers, and determining the location and size of flaws, defects, and anomalies. The same testing methods have also shown great potential to produce relatively high-resolution images of voids inside Spray On Foam Insulation (SOFI) test panels using real focused methods employing lens antennas. An alternative to real focusing methods are synthetic focusing methods. The essence of synthetic focusing is to match the phase of the scattered signal to measured points spaced regularly on a plane. Many variations of synthetic focusing methods have already been developed for radars, ultrasonic testing applications, and microwave concealed weapon detection. Two synthetic focusing methods were investigated; namely, a) frequency-domain synthetic aperture focusing technique (FDSAFT), and b) wide-band microwave holography. These methods were applied towards materials whose defects were of low dielectric contrast like air void in SOFI. It is important to note that this investigation used relatively low frequencies from 8.2 GHz to 26.5 GHz that are not conducive for direct imaging of the SOFI. The ultimate goal of this work has been to demonstrate the capability of these methods before they are applied to much higher frequencies such as the millimeter wave frequency spectrum (e.g., 30-300 GHz).

Case, Joseph Tobias↗
DOE OSTI2022

Shifting Trade-offs: Finding the Sustainable Nexus of Hydropower and Environmental Flows in the San Joaquin River Watershed, California

Environmental flow management in watersheds with multi-objective reservoirs is often presented as an additional constraint to an already strained and over-allocated stream system. Nevertheless, environmental flow legislation and regulatory policies are increasingly being developed and implemented globally. In California, USA, recent legislative and regulatory policies place environmental flows at the forefront of the state’s water management objectives; however, the increased reliance on hydropower to support climate change mitigation goals may complicate efforts on both issues. This study modelled alternative environmental flow strategies in the major tributaries to the San Joaquin River in California. Strategies included detailed water management rules for hydropower production, flood control, and water deliveries, and three methodological approaches to environmental flow releases: minimum instream flows (“baseline”) year-round, 40% of full natural flow (FNF) during the spring runoff season and minimum releases the remainder of the year, and functional flows year-round. Results show that environmental flow strategies affect downstream flow releases in each of the San Joaquin’s four sub-basins differently depending on infrastructure capacity, water management objectives, and hydrologic year types. While hydropower production was comparable or declined in the Stanislaus, Tuolumne, and Merced basins, functional flow and 40% FNF strategies increased hydropower production in the Upper San Joaquin basin by 11%. Uncontrolled spill of high flow events decreased when high flow releases were based on hydrologic cues rather than exclusively on flood storage capacity. Water deliveries were reduced in all years regardless of environmental flow strategy. The 40% FNF and functional flow strategies both increased water released to the river relative to baseline, but in different ways. The functional flow strategy allocated water in a holistic approach that enhanced ecological functions in all years, but particularly in moderate and wet years. In contrast, the 40% FNF strategy provided increased flows relative to baseline and some ecological benefit in dry years, but less ecological benefit in other years. This study shows that alternative environmental flow strategies will have different and important trade-offs for integrated water management, and may mutually benefit seemingly conflicting objectives.

13 HYDRO ENERGY↗
NASA NTRS1976

Computer-aided design of antenna structures and components

This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

Levy, R.↗
DOE OSTI2015

Discussion on the merits of deep borehole disposal, especially with recycling - 15389

With the continued global expansion of the nuclear industry, disposal of spent nuclear fuel (SNF) and high level waste (HLW) continues to be a largely unimplemented (but extensively studied) activity throughout the world and can continue to do so due to the safe practices of 'interim' SNF/used nuclear fuel (UNF) and HLW storage. However as the industry continues to operate and expand in both existing and new countries, the accumulated SNF/UNF and HLW will continue to grow in both quantity and locations across the globe; hence, requiring more effort to control and monitor. Countries with nuclear power programs, or are considering starting nuclear power programs, must consider the potential financial and the engineering burden associated with both the interim storage and the disposal of SNF/UNF and HLW produced by these programs: can the cost of disposal be reasonably captured in the cost of electricity produced from nuclear programs and are there suitable sites for disposal in their country, such as a mined-geologic site, for the expected accumulated quantity of SNF and HLW? Answering these questions may be particularly vexing for countries with small nuclear programs where establishing viable disposal sites for SNF and HLW and funding of the development of these sites may be a challenge. In an effort to establish an alternative to traditional, expensive, mined-geologic disposal sites, the deep borehole option has been (re-)considered by multiple countries and entities to be a relatively simple solution to disposal of SNF and HLW. However, disposal of SNF in deep boreholes must overcome several issues including: (1) limiting-sized borehole diameters; (2) limited ability for retrieval; and (3) potential hang-up issues associated with lowering longer (e.g., > 180 inches) canisters down into a deep borehole. Since most SNF is a resource when recycled (i.e., UNF) and to dispose of it in an irretrievable manner would be wasteful, a more optimal alternative that could overcome these issues and maximize the benefits of the UNF is to recycle the UNF and dispose of the resulting HLW into deep boreholes. The multiple and mutual benefits of this approach are elucidated in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2014

Tb{sub 2}O{sub 3} thin films: An alternative candidate for high-k dielectric applications

We are reporting the growth and structural, optical, and dielectric properties of Tb{sub 2}O{sub 3}, a relatively unexplored high-k dielectric material. A pulsed-laser deposition technique was used to grow Tb{sub 2}O{sub 3} thin-films on four different substrates: Si(100), SrTiO{sub 3}(100), LaAlO{sub 3}(100), and MgO(100). High-resolution X-ray diffraction and transmission electron microscopy results confirmed that film growth in an oxygen-rich (10{sup −1 }Torr) environment yields nearly single-crystal C-phase films, while a low-oxygen (10{sup −6 }Torr) environment growth results in the formation of monoclinic polycrystalline B-phase films. Optical transmission measurements showed that the bandgap of Tb{sub 2}O{sub 3} is direct in nature with a value of 2.8 eV and 3.4 eV for the cubic and monoclinic phases, respectively. By measuring the capacitance of test devices, quite high dielectric constants of 13.5 and 24.9 were obtained for the B- and C-phase Tb{sub 2}O{sub 3} films, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Relative Economic Merits of Storage and Combustion Turbines for Meeting Peak Capacity Requirements under Increased Penetration of Solar Photovoltaics

Batteries with several hours of capacity provide an alternative to combustion turbines for meeting peak capacity requirements. Even when compared to state-of-the-art highly flexible combustion turbines, batteries can provide a greater operational value, which is reflected in a lower system-wide production cost. By shifting load and providing operating reserves, batteries can reduce the cost of operating the power system to a traditional electric utility. This added value means that, depending on battery life, batteries can have a higher cost than a combustion turbine of equal capacity and still produce a system with equal or lower overall life-cycle cost. For a utility considering investing in new capacity, the cost premium for batteries is highly sensitive to a variety of factors, including lifetime, natural gas costs, PV penetration, and grid generation mix. In addition, as PV penetration increases, the net electricity demand profile changes, which may reduce the amount of battery energy capacity needed to reliably meet peak demand.

14 SOLAR ENERGY↗
NASA NTRS1998

Oxygen Isotopic Constraints on the Genesis of Carbonates from Martian Meteorite ALH84001

Ion microprobe oxygen isotopic measurements of a chemically diverse suite of carbonates from Martian meteorite ALH84001 are reported. The delta(sup 18)O values are highly variable, ranging from +5.4 to + 25.3%, and are correlated with major element compositions of the carbonate. The earliest forming (Ca-rich) carbonates have the lowest delta(sup 18)O values and the late-forming (Mg-rich) carbonates have the highest delta(sup 18)O values. Two models are presented which can explain the isotopic variations. The carbonates could have formed in a water rich environment at relatively low, but highly variable temperatures. In this open-system case the lower limit to the temperature variation is approx. 125 C, with fluctuations of over 250 C possible within the constraints of the model. Alternatively, the data can be explained by a closed-system model in which the carbonates precipitated from a limited amount of CO2-rich fluid. This scenario can reproduce the isotopic variations observed at a range of temperatures, including relatively high temperatures (less than 500 C). Thus the oxygen isotopic compositions do not provide unequivocal evidence for formation of the carbonates at low temperature. Although more information is needed in order to distinguish between the models, neither of the implied environments is consistent with biological activity. Thus, we suggest that features associated with the carbonates which have been interpreted to be the result of biological activity were most probably formed by inorganic processes.

Leshin, Laurie A.↗
NASA NTRS2003

Detecting Conductive Liquid Leaking from Nonconductive Pipe

A method that can be implemented with relatively simple electronic circuitry provides a capability for detecting leakage of an electrically conductive liquid from an electrically nonconductive underground pipe. Alternatively or in addition, the method can be applied to locate the pipe, whether or not there is a leak. Although the method is subject to limitations (some of which are described below), it is still attractive as an additional option for detecting leaks and locating pipes without need for extensive digging. The method is based on capacitive coupling of an alternating electrical signal from the liquid to a portable electronic unit that resembles a metal detector. A signal voltage is applied to the liquid at some convenient point along the pipe: for example, the signal could be coupled into the liquid via an aboveground metal pipe fitting, the interior surface of which is in contact with the liquid. The signal is conducted through the liquid in the pipe; in the case of diffusive leak of liquid into the surrounding ground, the signal is conducted through the leak, into the portion of the adjacent ground that has become soaked with the liquid. (A drip leak cannot be detected by this method because there is no conductive path between the liquid inside and the liquid outside the pipe.) The portable unit includes an electrically conductive plate connected to the input terminal of an amplifier. When the plate is brought near the pipe or the leaked liquid, a small portion of the signal power is coupled capacitively from the liquid to the plate. The user scans the plate near the ground surface to find the locus of maximum signal strength. The leak can be identified as a relatively wide area, contiguous with the location of the pipe, over which the signal is detectable.

Youngquist, Robert C.↗
DOE OSTI2020

A mass spectrometry-based high-throughput screening method for engineering fatty acid synthases with improved production of medium-chain fatty acids

Microbial cell factories have been extensively engineered to produce free fatty acids (FFAs), key components of crucial nutrients, soaps, industrial chemicals, and fuels. Yet, our ability to control the specificity of microbially synthesized FFAs is still limited for medium-chain fatty acids (MCFAs), which is mainly due to lack of high-throughput approaches for FFA analysis. Here we report a mass spectrometry (MS)-based method for rapid profiling of MCFAs in Saccharomyces cerevisiae by using membrane lipids as a proxy. Specially, matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) MS was used to detect shorter acyl chain phosphatidylcholines from membrane lipids and the m/z peak ratio at 730 and 758 was used as an index for improved MCFA production. This yeast colony-based method can be performed at a rate of ~2 second per sample, which is much faster than the gold standard gas chromatography (GC)-MS (typically > 30 min per sample). To demonstrate the power of this method, we performed site-saturation mutagenesis of the yeast fatty acid synthase and identified 9 mutants that resulted in improved MCFA production relative to the wild-type strain. This colony-based MALDI-ToF MS screening method offers an alternative way for engineering microbial fatty acid compositions in a high-throughput manner.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Cosmology meets cohomology

The cosmological polytope and bootstrap programs have revealed interesting connections between positive geometries, modern on-shell methods and bootstrap principles studied in the amplitudes community with the wavefunction of the Universe in toy models of FRW cosmologies. To compute these FRW correlators, one often faces integrals that are too difficult to evaluate by direct integration. Borrowing from the Feynman integral community, the method of (canonical) differential equations provides an efficient alternative for evaluating these integrals. Moreover, we further develop our geometric understanding of these integrals by describing the associated relative twisted cohomology. Leveraging recent progress in our understanding of relative twisted cohomology in the Feynman integral community, we give an algorithm to predict the basis size and simplify the computation of the differential equations satisfied by FRW correlators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Efficient Multigrid Reduction-in-Time for Method-of-Lines Discretizations of Linear Advection

Parallel-in-time methods for partial differential equations (PDEs) have been the subject of intense development over recent decades, particularly for diffusion-dominated problems. It has been widely reported in the literature, however, that many of these methods perform quite poorly for advection-dominated problems. In this report we analyze the particular iterative parallel-in-time algorithm of multigrid reduction-in-time (MGRIT) for discretizations of constant-wave-speed linear advection problems. We focus on common method-of-lines discretizations that employ upwind finite differences in space and Runge-Kutta methods in time. Using a convergence framework we developed in previous work, we prove for a subclass of these discretizations that, if using the standard approach of rediscretizing the fine-grid problem on the coarse grid, robust MGRIT convergence with respect to CFL number and coarsening factor is not possible. This poor convergence and non-robustness is caused, at least in part, by an inadequate coarse-grid correction for smooth Fourier modes in space-time known as characteristic components. We propose an alternative coarse-grid operator that provides a better correction of these modes. This coarse-grid operator is related to previous work and uses a semi-Lagrangian discretization combined with an implicitly treated truncation error correction. Theory and numerical experiments show the proposed coarse-grid operator yields fast MGRIT convergence for many of the method-of-lines discretizations considered, including for both implicit and explicit discretizations of high order. Parallel results demonstrate speed-up over sequential time-stepping.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Canonical Drude Weight for Non-integrable Quantum Spin Chains

The Drude weight is a central quantity for the transport properties of quantum spin chains. The canonical definition of Drude weight is directly related to Kubo formula of conductivity. However, the difficulty in the evaluation of such expression has led to several alternative formulations, accessible to different methods. In particular, the Euclidean, or imaginary-time, Drude weight can be studied via rigorous renormalization group. As a result, in the past years several universality results have been proven for such quantity at zero temperature; remarkably, the proofs work for both integrable and non-integrable quantum spin chains. Here we establish the equivalence of Euclidean and canonical Drude weights at zero temperature. Our proof is based on rigorous renormalization group methods, Ward identities, and complex analytic ideas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Recent and future developments in pultrusion technology with consideration for curved geometries: A review

Herein this paper examined the current state and future developments in pultrusion with particular emphasis on its application in curved part manufacturing. The relationship between factors such as resin chemistry, fiber characteristics, and die geometry that influences the properties of pultruded product were highlighted. Moreover, the specific challenges associated with pultruding curved parts such as the complexities in achieving uniformity and structural integrity in such geometries were discussed. The review emphasized mold design, process improvement, adaptive control systems for precise resin impregnation and material selection to address these challenges. Additionally, the paper suggests the integration of real-time monitoring and data analytics as ways to enhance quality control during curved parts pultrusion. These advancements will help to overcome challenges specific to curved pultrusion and make the process more efficient. Other manufacturing techniques such as filament winding, thermoforming, pulforming were mentioned as alternatives to curved parts pultrusion. The review also explores pultruded variable curvature processes, highlighting some notable patents and article related to this subject matter. Production of pultruded variable curvature parts was seen as a key driver that can shape the future of pultrusion. Finally, the paper anticipates future trends, with sustainability, customization, integration of advanced materials, and development of techniques for pultrusion of composites parts.

42 ENGINEERING↗
DOE OSTI2019

Effects of irradiation temperature on the response of CeO2, ThO2, and UO2 to highly ionizing radiation

Microcrystalline CeO 2 , ThO 2 , and UO 2 were irradiated with 198 MeV 132 Xe ions to the same fluence at temperatures ranging from 25°C to 700°C then characterized by synchrotron X-ray diffraction and X-ray absorption spectroscopy. All samples retain crystallinity and their nominal fluorite-type phase at a fluence of 1.5x10 13 ions/cm 2 . Both CeO 2 and ThO 2 display defect-induced unit cell expansion after irradiation at room temperature (~0.15% and ~0.10%, respectively), yet as irradiation temperature increases, the maximum swelling produced decreases to ~0.02%. Alternatively, UO 2 shows an initial contraction in unit cell parameter (approximately -0.05%), for room temperature irradiation most likely related to irradiation-enhanced annealing or irradiation-induced oxidation. At higher temperatures (above 200°C), UO 2 begins to swell, surpassing its unit cell parameter prior to irradiation (~0.05%), an effect which could be attributed to minor reduction in uranium oxidation state in vacuum. However, while CeO 2 irradiated at room temperature undergoes partial reduction, both UO 2 and ThO 2 exhibit no measurable change in cation oxidation state as evidenced by X-ray absorption spectroscopy. All samples display a decrease in irradiation-induced heterogeneous microstrain as a function of increasing irradiation temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Rapid surface hardening and enhanced tribological performance of 4140 steel by friction stir processing

Tribological performance of steel materials can be substantially enhanced by various thermal surface hardening processes. For relatively low-carbon steel alloys, case carburization is often used to improve surface performance and durability. If the carbon content of steel is high enough (>0.4%), thermal treatments such as induction, flame, laser, etc. can produce adequate surface hardening without the need for surface compositional change. This paper presents an experimental study of the use of friction stir processing (FSP) as a means to hardened surface layer in AISI 4140 steel. The impacts of this surface hardening process on the friction and wear performance were evaluated under both dry and lubricated contact conditions in reciprocating sliding. FSP produced the same level of hardening and superior tribological performance when compared to conventional thermal treatment, using only 10% of the energy and without the need for quenching treatments. With FSP surface hardness of about 7.8 GPa (62 Rc) was achieved while water quenching conventional heat treatment produced about 7.5 GPa (61 Rc) hardness. Microstructural analysis showed that both FSP and conventional heat treatment produced martensite. Although the friction behavior for FSP treated surfaces and the conventional heat treatment were about the same, the wear in FSP processed surfaces was reduced by almost 2× that of conventional heat treated surfaces. Furthermore, the superior performance is attributed to the observed grain refinement accompanying the FSP treatment in addition to the formation of martensite. As it relates to tribological performance, this study shows FSP to be an effective, highly energy efficient, and environmental friendly (green) alternative to conventional heat treatment for steel.

36 MATERIALS SCIENCE↗