Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Manipulation of Scattering Spectra with Topology of Light and Matter

Structured lights, including beams carrying spin and orbital angular momenta, radially and azimuthally polarized vector beams, as well as spatiotemporal optical vortices, have attracted significant interest due to their unique amplitude, phase front, polarization, and temporal structures, enabling a variety of applications in optical and quantum communications, micromanipulation, and super-resolution imaging. In parallel, structured optical materials, metamaterials, and metasurfaces consisting of engineered unit cells—meta-atoms, opened new avenues for manipulating the flow of light and optical sensing. While several studies explored structured light effects on the individual meta-atoms, their shapes are largely limited to simple spherical geometries. However, the synergy of the structured light and complex-shaped meta-atoms has not been fully explored. Here, in this paper, the role of the helical wavefront of Laguerre–Gaussian beams in the excitation and suppression of higher-order resonant modes inside all-dielectric meta-atoms of various shapes, aspect ratios, and orientations, is demonstrated and the excitation of various multipolar moments that are not accessible via unstructured light illumination is predicted. The presented study elucidates the role of the complex phase distribution of the incident light in shape-dependent resonant scattering, which is of utmost importance in a wide spectrum of applications ranging from remote sensing to spectroscopy.

42 ENGINEERING↗

3D Printing Amorphous Polysiloxane Terpolymers via Vat Photopolymerization

Abstract Photocuring and vat photopolymerization (VP) additive manufacturing (AM) is reported for two families of fully amorphous poly(dimethyl siloxane) (PDMS) terpolymers containing either diphenylsiloxy (DiPhS) or diethylsiloxy (DiEtS) repeating units. A thiol‐functionalized PDMS crosslinker enables rapid crosslinking in air using efficient thiol–ene addition. Differential scanning calorimetry and dynamic mechanical analysis (DMA) confirm the absence of crystallinity for the DiPhS‐containing systems, while DMA shows a rubbery plateau extending to greater than 200 °C for the DiEtS‐containing system. VP‐AM of both photopolymer systems afford well‐defined 3D geometries, including high aspect ratio structures, which demonstrate feasibility of these photopolymers for the 3D printing of unique geometric objects that require elastomeric performance to temperatures as low as −120 °C.

Sirrine, Justin M.↗

Amphiphilic Peptoid–Directed Assembly of Oligoanilines into Highly Crystalline Conducting Nanotubes

It is reported herein the synthesis of a novel amphiphilic diblock peptoid bearing a terminal conjugated oligoaniline and its self-assembly into small-diameter (D ≈ 35 nm) crystalline nanotubes with high aspect ratios (>30). It is shown that both tetraaniline (TANI)-peptoid and bianiline (BANI)-peptoid triblock molecules self-assemble in solution to form rugged highly crystalline nanotubes that are very stable to protonic acid doping and de-doping processes. The similarity of the crystalline tubular structure of the nanotube assemblies revealed by electron microscopy imaging, and X-ray diffraction analysis of the nanotube assemblies of TANI-functionalized peptoids and nonfunctionalized peptoids showed that the peptoid is an efficient ordered structure directing motif for conjugated oligomers. Films of doped TANI-peptoid nanotubes has a dc conductivity of ca. 95 mS cm –1 , while the thin films of doped un-assembled TANI-peptoids show a factor of 5.6 lower conductivity, demonstrating impact of the favorable crystalline ordering of the assemblies on electrical transport. Furthermore, these results demonstrate that peptoid-directed supramolecular assembly of tethered π-conjugated oligo(aniline) exemplify a novel general strategy for creating rugged ordered and complex nanostructures that have useful electronic and optoelectronic properties.

conducting nanotubes↗

Tailoring the Surface Structures of CuPt and CuPtRu 1D Nanostructures by Coupling Coreduction with Galvanic Replacement

1D metal nanostructures exhibit unique properties due to their high aspect ratio for use in many applications including electrocatalysis. This work develops a solution-based approach to 1D multimetal nanostructures with tunable surface structures by combining the two processes of coreduction and galvanic replacement. In this approach, noble metals of Pt and Ru are reduced in the presence of in situ formed Cu seeds. At high concentrations of noble metal precursors, coreduction dominates over galvanic replacement, leading to overgrowth of ultrafine, particulate, or branched structures on the surface of the 1D nanostructures. The surface roughness and composition can be tuned by varying the concentrations of noble metal precursors. The electrochemical reactivity is not only affected by the surface roughness (i.e., the size of particulates and the level of branches) but also the surface composition (i.e., the amount of Pt content). For trimetallic nanostructures, the alloy composition prevents the dissolution of Ru thereby improving electrocatalytic stability of the catalyst under acidic conditions. Lastly, the structure–property study reveals that the surface structure plays an important role in tailoring the electrocatalytic property of a catalyst.

36 MATERIALS SCIENCE↗

Preferred Void Orientation in Uniaxially Pressed PBX 9502

Ultra- and small-angle neutron scattering techniques were used to study the morphology of voids in directions parallel and perpendicular to the compaction plane of a uniaxially pressed cylinder of PBX 9502. Two-dimensional scattering patterns from samples cut parallel to the compaction plane had circular equal-intensity contours, implying that along this view the voids are circular or randomly oriented. Identical measurements of samples cut perpendicular to the compaction plane produced elliptical equal-intensity contours, indicating preferred orientation of voids. Analysis of the two dimensional scattering patterns confirmed that the voids are non-spherical with an average aspect ratio of 1.20, flattened so that the larger dimensions of the voids lie within the compaction plane. Model analysis of the combined ultra- and small-angle neutron scattering curves revealed that the PBX 9502 porosity is interconnected, in the form of aggregates comprised of non-spherical, primary voids. The volume dimension was found to be the same in both directions, indicating that the aggregate is randomly oriented throughout the sample, and that it is the primary voids that are preferentially oriented. Furthermore, void interfaces with the surrounding matrix were found to be rough or polydisperse, with a common roughness dimension or polydispersity in all directions.

42 ENGINEERING↗

Effective buoyancy at the surface and aloft

Here, it is shown here that a wide, buoyant parcel of air at the surface accelerates far less rapidly than it does aloft. In particular, analytical formulae are derived for the effective buoyancy (i.e. the net vertical acceleration due to parcel buoyancy and environmental response) of idealized cylinders of diameter D and height H, located in free space and at the surface. These formulae quantify the decrease of effective buoyancy with increasing aspect ratio D/H, and show that this effect is more pronounced for surface cylinders, especially when D/H > 1. We gain intuition for these results by considering the pressure fields generated by these buoyant parcels, and we test our results with large-eddy simulations. Our formulae can inform parametrizations of the vertical velocity equation for clouds, and also provide a quantitative map of the 'grey zone' in numerical modelling between hydrostatic and non-hydrostatic regimes.

58 GEOSCIENCES↗

Large Photothermal Effect in Sub-40 nm h-BN Nanostructures Patterned Via High-Resolution Ion Beam

The controlled nanoscale patterning of 2D materials is a promising approach for engineering the optoelectronic, thermal, and mechanical properties of these materials to achieve novel functionalities and devices. Herein, high-resolution patterning of hexagonal boron nitride (h-BN) is demonstrated via both helium and neon ion beams and an optimal dosage range for both ions that serve as a baseline for insulating 2D materials is identified. Through this nanofabrication approach, a grating with a 35 nm pitch, individual structure sizes down to 20 nm, and additional nanostructures created by patterning crystal step edges are demonstrated. Raman spectroscopy is used to study the defects induced by the ion beam patterning and is correlated to scanning probe microscopy. Photothermal and scanning near-field optical microscopy measure the resulting near-field absorption and scattering of the nanostructures. These measurements reveal a large photothermal expansion of nanostructured h-BN that is dependent on the height to width aspect ratio of the nanostructures. This effect is attributed to the large anisotropy of the thermal expansion coefficients of h-BN and the nanostructuring implemented. Finally, the photothermal expansion should be present in other van der Waals materials with large anisotropy and can lead to applications such as nanomechanical switches driven by light.

2D materials↗

Single‐Particle Tracking for Understanding Polydisperse Nanoparticle Dispersions

Abstract Colloidal dispersions of nanomaterials are often polydisperse in size, significantly complicating their characterization. This is particularly true for materials early in their historical development due to synthetic control, dispersion efficiency, and instability during storage. Because a wide range of system properties and technological applications depend on particle dimensions, it remains an important problem in nanotechnology to identify a method for the routine characterization of polydispersity in nanoparticle samples, especially changes over time. Commonly employed methods such as dynamic light scattering or analytical ultracentrifugation (AUC) accurately estimate only the first moment of the distribution or are not routine. In this work, the use of single‐particle tracking (SPT) to probe size distributions of common nanoparticle dispersions, including polystyrene nanoparticles, single‐walled carbon nanotubes, graphene oxide, chitosan‐tripolyphosphate, acrylate, hexagonal boron nitride, and poly(lactic‐ co ‐glycolic acid), is proposed and explored. The analysis of particle tracks is conducted using a newly developed Bayesian algorithm that is called Maximum A posteriori Nanoparticle Tracking Analysis. By combining SPT and AUC techniques, it is shown that it is possible to independently estimate the mean aspect ratio of anisotropic particles, an important characterization property. It is concluded that SPT provides a facile, rapid analytical method for routine nanomaterials characterization.

Gong, Xun↗

Bioinspired Peptoid Nanotubes for Targeted Tumor Cell Imaging and Chemo-Photodynamic Therapy

Substantial progress has been made in applying nanotubes in biomedical applications such as bioimaging and drug delivery due to their unique architecture, characterized by very large internal surface areas and high aspect ratios. Yet, the biomedical applications of organic nanotubes, especially for those assembled from sequence-defined molecules, are very uncommon. In our work, the synthesis of two new peptoid nanotubes (PepTs1 and PepTs2) is reported by using sequence-defined and ligand-tagged peptoids as building blocks. These nanotubes are highly robust due to sharing a similar structure to those of nontagged ones, and offer great potential to hold guest molecules for biomedical applications. The findings indicate that peptoid nanotubes loaded with doxorubicin drugs are promising candidates for targeted tumor cell imaging and chemo-photodynamic therapy.

60 APPLIED LIFE SCIENCES↗

Direct Exfoliation of Nanoribbons from Bulk van der Waals Crystals

Confinement of monolayers into quasi-1D atomically thin nanoribbons could lead to novel quantum phenomena beyond those achieved in their bulk and monolayer counterparts. However, current experimental availability of nanoribbon species beyond graphene is limited to bottom-up synthesis or lithographic patterning. Here, in this study, a versatile and direct approach is introduced to exfoliate bulk van der Waals crystals as nanoribbons. Akin to the Scotch tape exfoliation method for producing monolayers, this technique provides convenient access to a wide range of nanoribbons derived from their corresponding bulk crystals, including MoS 2 , WS 2 , MoSe 2 , WSe 2 , MoTe 2 , WTe 2 , ReS 2 , and hBN. The nanoribbons are predominantly monolayer, single-crystalline, parallel-aligned, flat, and exhibit high aspect ratios. The role of confinement, strain, and edge configuration of these nanoribbons is observed in their electrical, magnetic, and optical properties. This versatile exfoliation technique provides a universal route for producing a variety of nanoribbon materials and supports the study of their fundamental properties and potential applications.

2D materials↗

Tip-Induced 3D Printing on the Nanoscale with Field Emission Scanning Probes

3D printing down to the nanoscale remains a significant challenge. In this paper, the study explores the use of scanning probes that emit low-energy electrons (<100 eV) coupled with the localized injection and electron-induced decomposition of precursor molecules, for the precise localized deposition of 3D nanostructures. The experiments are performed inside the chamber of a scanning electron microscope (SEM), enabling the use of the in-built gas injector system (GIS) with gaseous naphthalene precursor for carbon deposition, as well as immediate inspection of the deposits by SEM. Substrate materials are planar fused silica with thin conductive coatings and non-planar copper wedges. After investigation of the deposition process parameters, various 2D and 3D carbon deposits are grown. Vertical nanowires several microns in length with a diameter <100 nm are achieved and 3D deposits with a high degree of nanoscale branching are also obtained, presumably due to a charging effect. High aspect ratio carbon nanostructures such as those demonstrated here can be employed as miniaturized electrodes or field emitters. The tip-based approach presented thus paves the way toward 3D nanoscale printing of various materials and functional nanostructures.

3D printing↗

Mechanistic Transformation of CuI Nanoparticles Into Oxidation‐Resistant 2D Copper Nanoplates

Unconventional phase transformations reveal new crystallization mechanisms, yet direct observation of such pathways during nanoscale solution-phase synthesis remains challenging. This study uncovers an atypical growth process in which thermodynamically stable CuI nanoparticles (NPs) transform into high-energy 2D Cu plates. Using a combination of in situ transmission electron microscopy, ex situ structural analysis, and density functional theory calculations shows that the formation of structural defects induced by hexadecylamine and chloride ions facilitates the transformation by promoting surface iodine vacancies. The resulting Cu{111} nanoplates, with ultrathin thicknesses (≈4 nm) and exceptionally high aspect ratios (≈450), display enhanced oxidation resistance and long-term stability under ambient conditions. This resistance is attributed to the close-packed {111} facets, which suppress chemical oxidation even after extended exposure to air over 100 days. These findings provide new insights into non-classical crystallization pathways in metal nanomaterials and suggest a versatile approach for preparing oxidation-resistant, structurally defined Cu nanostructures.

36 MATERIALS SCIENCE↗

Laser‐Sintered Silver Metallization for Silicon Heterojunction Photovoltaic Cells

Herein, a novel metallization technique is reported for crystalline silicon heterojunction (SHJ) solar cells in which silver (Ag) fingers are printed on the SHJ substrates by dispensing Ag nanoparticle‐based inks through a needle and then sintered with a continuous‐wave carbon dioxide (CO 2 ) laser. The impact of the Ag ink viscosity on the line quality and the line resistance is investigated on three Ag inks with different viscosities. Increasing ink viscosity yields higher Ag contact heights, larger aspect ratios, and lower line resistance values. The Ag line height increases from less than a micrometer to ≈18.62 ± 3.48 μm with the increasing viscosity. Photoluminescence imaging shows that the low‐resistance Ag metal contacts obtained do not result in any passivation damage of the SHJ substrate. This is because the wavelength of light emitted from the CO 2 laser (i.e., 10.6 μm) leads to optical absorption in the Ag, but this light is effectively transparent to the transparent conductive oxide film, amorphous silicon films, and crystalline silicon substrate. Bulk resistivity values as low as 6.5 μΩ cm are obtained for the laser‐sintered Ag contact and printed using the Ag ink with the highest viscosity in this work.

Mousumi, Jannatul Ferdous↗

Numerical Simulation and Validation of Gas and Molten Metal Flows in Close-Coupled Gas Atomization

Molten metal atomization in close-coupled gas atomization dies can operate between two limiting conditions, jetting and filming, together with several complex mechanisms: liquid-gas drafting, downward/upward shearing, melt bouncing, etc. Liquid jet deformation depends on flow and geometric parameters, such as liquid Reynolds, liquid Weber, and gas Mach numbers, as well as gas jet apex angle and melt tube tip extension and aspect ratio, among others. Understanding their effect is of importance for the metal powder making industry. Numerical gas atomization studies can provide approximated flow information and consider a wide range of conditions, beyond experimental reach. Here, 3D high-resolution simulations employing a 5-equation compressible flow model coupled with the volume-of-fluid method are compared with experiments, for liquid Weber number in the range of 1–30 and liquid Reynolds number below 10,000. This validation explores the predicting capabilities of the numerical model.

Hernandez, F.↗

Ion Beams in Nanoscience and Technology

Energetic ion beam irradiation is the basis of a wide plethora of powerful research- and fabrication-techniques for materials characterisation and processing on a nanometre scale. Ion implantation is increasingly employed to tailor materials to various optical, magnetic and electrical properties, focused ion beams can be used to machine away or deposit material on a scale of nanometres, and the scattering of energetic ions is a unique and quantitative tool for process development in high speed electronics and 3-D nanostructures with extreme aspect ratios for tissue engineering and nano-fluidics lab-on-a-chip may be machined using proton beams. This book is proposed to be a multi-author work with different chapters written by established scientists from around the world that have a deep knowledge in their respective fields. The goal is to produce a work that is of real use to practitioners, researchers and students across the whole cross-disciplinary span of nanoscience and technology. Frontline nanoscience and technology developments in bio-medicine, optical materials and high-speed electronics will be used as a signpost and anchor point to subsequent sections that move progressively from fundamentals of nanoscale ion-matter interactions and theoretical tools towards the practical applications for forming nanostructures by ion irradiation, nanoscale characterisation of ion-damage and the interactions between nanolayers and writing novel structures with high and low energy ion beams. It is to propose to organise the work in five sections: Part I Trends in nanoscience and technology Part II Interaction of ions with materials on a nanoscale Part III Ion beam characterisation of nanoscale materials Part IV Nanoscale materials processing with ion beams Part V Equipment and practice

Ion beams↗

Colliding localized, lumpy holographic shocks with a granular nuclear structure

We apply a recent and simple technique which speeds up the calculation of localized collisions in holography to study more realistic models of the pre-hydrodynamic phase of heavy ion collisions using gauge/gravity duality. Our initial data reflects the lumpy nuclear structure of real heavy ions and our projectiles’ aspect ratio mimics the Lorentz contraction of nuclei during RHIC collisions. At the hydrodynamization time of the central region of the quark gluon plasma developed during the collision, we find that most of the system’s vorticity is located well outside the hydrodynamized part of the plasma. Only the relativistic corrections to the thermal vorticity within the hydrodynamized region are non-negligible. We compare the transverse flow shortly after the collision with previous results which did not use granular initial conditions and determine the proper energy density and fluid velocity in the hydrodynamized subregion of the plasma.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fishnet four-point integrals: integrable representations and thermodynamic limits

In this work, we consider four-point integrals arising in the planar limit of the conformal “fishnet” theory in four dimensions. They define a two-parameter family of higher-loop Feynman integrals, which extend the series of ladder integrals and were argued, based on integrability and analyticity, to admit matrix-model-like integral and determinantal representations. In this paper, we prove the equivalence of all these representations using exact summation and integration techniques. We then analyze the large-order behaviour, corresponding to the thermodynamic limit of a large fishnet graph. The saddle-point equations are found to match known two-cut singular equations arising in matrix models, enabling us to obtain a concise parametric expression for the free-energy density in terms of complete elliptic integrals. Interestingly, the latter depends non-trivially on the fishnet aspect ratio and differs from a scaling formula due to Zamolodchikov for large periodic fishnets, suggesting a strong sensitivity to the boundary conditions. We also find an intriguing connection between the saddle-point equation and the equation describing the Frolov-Tseytlin spinning string in AdS 3 × S 1 , in a generalized scaling combining the thermodynamic and short-distance limits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Asymmetric shockwave collisions in AdS 5

Collisions of asymmetric planar shocks in maximally supersymmetric Yang-Mills theory are studied via their dual gravitational formulation in asymptotically anti-de Sitter spacetime. The post-collision hydrodynamic flow is found to be very well described by appropriate means of the results of symmetric shock collisions. This study extends, to asymmetric collisions, previous work of Chesler, Kilbertus, and van der Schee examining the special case of symmetric collisions. Given the universal description of hydrodynamic flow produced by asymmetric planar collisions one can model, quantitatively, non-planar, non-central collisions of highly Lorentz contracted projectiles without the need for computing, holographically, collisions of finite size projectiles with very large aspect ratios. This paper also contains a pedagogical description of the computational methods and software used to compute shockwave collisions using pseudo-spectral methods, supplementing the earlier overview of Chesler and Yaffe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗