Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “viscous effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A general method to determine the stability of compressible flows

Several problems were studied using two completely different approaches. The initial method was to use the standard linearized perturbation theory by finding the value of the individual small disturbance quantities based on the equations of motion. These were serially eliminated from the equations of motion to derive a single equation that governs the stability of fluid dynamic system. These equations could not be reduced unless the steady state variable depends only on one coordinate. The stability equation based on one dependent variable was found and was examined to determine the stability of a compressible swirling jet. The second method applied a Lagrangian approach to the problem. Since the equations developed were based on different assumptions, the condition of stability was compared only for the Rayleigh problem of a swirling flow, both examples reduce to the Rayleigh criterion. This technique allows including the viscous shear terms which is not possible in the first method. The same problem was then examined to see what effect shear has on stability.

Guenther, R. A.↗
NASA NTRS1981

Grid evolution in time asymptotic problems

The selection of the proper coordinate system in solving any fluid flow or heat transfer problem is a very important consideration. A new technique of moving mesh points in physical space is introduced so as to reduce the error in a computed asymptotic solution relative to that obtained using a fixed mesh. The technique has been used to solve the simple viscous Burgers' equation in one and two dimensions. Substantial error reductions are demonstrated. The treatment of boundary points and the effect of using different error criteria in generating grids are discussed.

Rai, M. M.↗
NASA NTRS1988

Evolution of inclined galactic gas disks. I - A cloud-fluid approach

In this paper, numerical models are developed to follow the time-dependent behavior of inclined gas disks in nonspherical galaxies. Differential equations are developed which describe the time rate of change of the orbits of mass elements composing a thin, smoothly warping and twisting gas disk. These equations include multiple moments due to the nonsphericity of the galactic mass distribution, Coriolis effects arising from determination of orbits in a reference frame which tumbles with the surface figure of the galaxy, and viscous forces arising from cloud-cloud collisions. A cloud-fluid approach is used in determining the viscous forces. Physical arguments are used to determine the maximum permissible local value of the coefficient of kinematic viscosity. For small initial inclinations, analytic expressions are obtained for the inclination as a function of time and for the settling time, and the features of the solution are discussed.

Steiman-Cameron, Thomas Y.↗
NASA NTRS1991

Nonequilibrium radiation and chemistry models for aerocapture vehicle flowfields, volume 1

The following subject areas are covered: the development of detailed nonequilibrium radiation models for molecules along with appropriate models for atoms; the inclusion of nongray radiation gasdynamic coupling in the VSL (Viscous Shock Layer) code; the development and evaluation of various electron-electronic energy models; and an examination of the effects of shock slip.

Carlson, Leland A.↗
NASA NTRS2024

Conceptual Design and Validation of a Bent-Perforation-Path Acoustic Liner

An acoustic liner concept is developed that increases the effective thickness of perforate sheet holes by bending the perforation paths within the facesheet. This significantly increases both the viscous-loss resistance and mass reactance properties of the acoustic liner, creating low-frequency absorption utilizing a small amount of liner volume. An initial concept is designed, 3D-printed, and tested in a normal-incidence impedance tube to verify the acoustic properties. Comparisons to an impedance model are shown with good agreement to test data, although further work needs to be done to more accurately capture the losses associated with bends within the hole. Follow-on concepts are also discussed that attempt to address the current shortcomings of the initial design.

acoustic liner perforate impedance↗
NASA NTRS2004

Modeling Compressibility Effects in High-Speed Turbulent Flows

Man has strived to make objects fly faster, first from subsonic to supersonic and then to hypersonic speeds. Spacecraft and high-speed missiles routinely fly at hypersonic Mach numbers, M greater than 5. In defense applications, aircraft reach hypersonic speeds at high altitude and so may civilian aircraft in the future. Hypersonic flight, while presenting opportunities, has formidable challenges that have spurred vigorous research and development, mainly by NASA and the Air Force in the USA. Although NASP, the premier hypersonic concept of the eighties and early nineties, did not lead to flight demonstration, much basic research and technology development was possible. There is renewed interest in supersonic and hypersonic flight with the HyTech program of the Air Force and the Hyper-X program at NASA being examples of current thrusts in the field. At high-subsonic to supersonic speeds, fluid compressibility becomes increasingly important in the turbulent boundary layers and shear layers associated with the flow around aerospace vehicles. Changes in thermodynamic variables: density, temperature and pressure, interact strongly with the underlying vortical, turbulent flow. The ensuing changes to the flow may be qualitative such as shocks which have no incompressible counterpart, or quantitative such as the reduction of skin friction with Mach number, large heat transfer rates due to viscous heating, and the dramatic reduction of fuel/oxidant mixing at high convective Mach number. The peculiarities of compressible turbulence, so-called compressibility effects, have been reviewed by Fernholz and Finley. Predictions of aerodynamic performance in high-speed applications require accurate computational modeling of these "compressibility effects" on turbulence. During the course of the project we have made fundamental advances in modeling the pressure-strain correlation and developed a code to evaluate alternate turbulence models in the compressible shear layer.

Sarkar, S.↗
NASA NTRS1993

Effect of rotation rate on the forces of a rotating cylinder: Simulation and control

In this paper we present numerical solutions to several optimal control problems for an unsteady viscous flow. The main thrust of this work is devoted to simulation and control of an unsteady flow generated by a circular cylinder undergoing rotary motion. By treating the rotation rate as a control variable, we can formulate two optimal control problems and use a central difference/pseudospectral transform method to numerically compute the optimal control rates. Several types of rotations are considered as potential controls, and we show that a proper synchronization of forcing frequency with the natural vortex shedding frequency can greatly influence the flow. The results here indicate that using moving boundary controls for such systems may provide a feasible mechanism for flow control.

Burns, John A.↗
NASA NTRS2019

Modeling and Simulation Techniques for the NASA SLS Service Module Panel Separation Event; from Loosely-Coupled Euler to Fully-Coupled 6-DOF, Time-Accurate, Navier-Stokes Methodologies

An aerodynamic database has been generated for use by the Orion Multi-Purpose Crew Vehicle (MPCV) Program to analyze Service Module (SM) panel jettison from the NASA SLS vehicle. The database is a combination of CFD data for the panel aerodynamic coefficients, and MATLAB code written to query the CFD data. The Cart3D inviscid CFD flow solver was used to generate the panel aerodynamic coefficients for static panel orientations and free stream conditions that can occur during the jettison event. The MATLAB code performs the multivariate interpolation to obtain aerodynamic coefficients. The MATLAB code uses input for SM panel parameters and returns the SM panel aerodynamic force and moment coefficients for use with a Six-Degree-of-Freedom (6-DOF) motion solver to model the jettison event. This paper examines the accuracy of the sequential-static database approach by modeling the panel jettison event with a fully-coupled, time-dependent, viscous, moving-body CFD simulation. The fully-coupled simulation is obtained using the Loci/Chem unstructured Navier-Stokes CFD solver. The results show that the fully-coupled approach agrees well with the loosely-coupled database/6-DOF approach, indicating that unsteady effects are minimal for the panel jettison event. These results suggest that the database/6-DOF approach is sufficient. In addition, this paper presents the development of an uncertainty model for use in Monte Carlo analysis of the panel jettison event. Here viscous CFD simulations are obtained with Loci/Chem and compared to the inviscid CFD forces and moments. An uncertainty model based on model-form error and numerical error is presented.

Hall, Leslie H.↗
NASA NTRS1989

Effect of wall cooling on the stability of compressible subsonic flows over smooth humps and backward-facing steps

The effect of wall cooling on the two-dimensional linear stability of subsonic flows over two-dimensional surface imperfections is investigated. Results are presented for flows over smooth humps and backward-facing steps with Mach numbers up to 0.8. The results show that, whereas cooling decreases the viscous instability, it increases the shear-layer instability and hence it increases the growth rates in the separation region. The coexistence of more than one instability mechanism makes a certain degree of wall cooling most effective. For the Mach numbers 0.5 and 0.8, the optimum wall temperatures are about 80 pct and 60 pct of the adiabatic wall temperature, respectively. Increasing the Mach number decreases the effectiveness of cooling slightly and reduces the optimum wall temperature.

Al-Maaitah, Ayman A.↗
NASA NTRS1990

Effect of wall cooling on the stability of compressible subsonic flows over smooth humps and backward-facing steps

The effect of wall cooling on the two-dimensional linear stability of subsonic flows over two-dimensional surface imperfections is investigated. Results are presented for flows over smooth humps and backward-facing steps with Mach numbers up to 0.8. The results show that, whereas cooling decreases the viscous instability, it increases the shear-layer instability and hence it increases the growth rates in the separation region. The coexistence of more than one instability mechanism makes a certain degree of wall cooling most effective. For the Mach numbers 0.5 and 0.8, the optimum wall temperatures are about 80 pct and 60 pct of the adiabatic wall temperature, respectively. Increasing the Mach number decreases the effectiveness of cooling slightly and reduces the optimum wall temperature.

Al-Maaitah, Ayman A.↗
NASA NTRS1997

Enhanced Control Effector Designs for Airbreathing Transatmospheric Vehicles

A study was conducted to evaluate the potential effectiveness of a moveable cowl-trailing-edge design for airbreathing hypersonic single-stage-to-orbit (SSTO) configurations, which can be extended or deflected from the nominal position in order to provide additional pitching moment capability. This additional pitching moment capability may reduce the necessary deflection angle from conventional control surfaces and the associated trim drag penalty. Calculations for a generic SSTO configuration with baseline and modified cowl trailing edge geometries were performed at Mach 6 and 10 initially with an engineering analysis code in order to examine several design parametrics. In order to more accurately model geometries and flow physics, 2-D viscous computational fluid dynamics (CFD) predictions were obtained. FInally, a limited set of 3D CFD predictions were obtained at Mach 6 in order to show the effects of modeling 3D flow fields as well as the full 3D vehicle geometry. Comparisons of aftbody surface pressures and force and moment predictions show differences between initial predictions and 2-D CFD solutions due to geometry modeling and calculation method differences. The 3-D CFD predictions confirm the trends observed in the 2-D solutions and provide additional information on 3D effects. These analyses shows that cowl-trailing-edge extensions were effective in providing additional (nose-down) pitching moment increments as well as increased thrust compared to the baseline geometry. These effects reduce the control surface deflection angle required to trim the vehicle and the associated trim drag. Cowl-trailingedge deflections were not as effective, generating more nose-up pitching moment and decreased thrust compared to non-deflected cases.

Cockrell, Charles E.↗
DOE OSTI2021

Coupled Boltzmann transport equations of heavy quarks and quarkonia in quark-gluon plasma

We develop a framework of coupled transport equations for open heavy flavor and quarkonium states, in order to describe their transport inside the quark-gluon plasma. Our framework is capable of studying simultaneously both open and hidden heavy flavor observables in heavy-ion collision experiments and can account for both, uncorrelated and correlated recombination. Our recombination implementation depends on real-time open heavy quark and antiquark distributions. We carry out consistency tests to show how the interplay among open heavy flavor transport, quarkonium dissociation and recombination drives the system to equilibrium. We then apply our framework to study bottomonium production in heavy-ion collisions. We include Υ(1S), Υ(2S), Υ(3S), χb (1P) and χb (2P) in the framework and take feed-down contributions during the hadronic gas stage into account. Cold nuclear matter effects are included by using nuclear parton distribution functions for the initial primordial heavy flavor production. A calibrated 2 + 1 dimensional viscous hydrodynamics is used to describe the bulk QCD medium. We calculate both the nuclear modification factor R AA of all bottomonia states and the azimuthal angular anisotropy coefficient v 2 of the Υ(1S) state and find that our results agree reasonably with experimental measurements. Our calculations indicate that correlated cross-talk recombination is an important production mechanism of bottomonium in current heavy-ion experiments. The importance of correlated recombination can be tested experimentally by measuring the ratio of R AA ( χb (1P)) and R AA (Υ(2S)).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1972

Factors which influence the analysis and design of ejector nozzles.

A theoretical analysis of the viscous interaction between the primary and secondary streams of ejector nozzles was developed. The analysis accounts for real sonic-line effects and the streamwise variation in stream mixing and boundary layer within the ejector. The aspects of the analysis are explained and illustrated by applying the theory to a variety of ejector configurations including cylindrical shroud, contoured flap and plug nozzles. Extensive comparisons are made between theory and data to show the importance of various analytical assumptions and such design variables as diameter ratio, spacing ratio, total temperature ratio, and primary nozzle geometry.

Anderson, B. H.↗
NASA NTRS1976

Pressure and velocity in a developing coaxial jet

Determinations of static pressure, mean velocity and turbulence intensity in the developing region of coaxial jets are presented. Detailed profiles were obtained at twelve axial locations (extending from the nozzle exit for a distance of 5 diameters) downstream from a single element of the Bell Aerospace H2/O2 19-element coaxial injector. Measurements of mass-flux per unit area (using a constant temperature anemometer), total pressure and local temperature were used in the determination of local static pressure and velocity. These data show a low pressure region exists near the nozzle exit. Although this pressure reduction is small (0.34 psi), it substantially altered the flow development. Comparison of results shows that velocity near the nozzle exit decreases initially (no central velocity core) as a result of both pressure gradients and viscous mixing. These data are compared with analytical predictions made using available computer codes. Results show the need to consider pressure effects in any proposed mathematical model.

Moon, L. F.↗
NASA NTRS1978

Viscous flow simulations in VTOL aerodynamics

The critical issues in viscous flow simulations, such as boundary-layer separation, entrainment, turbulence modeling, and compressibility, are discussed with regard to the ground effects problem for vertical-takeoff-and-landing (VTOL) aircraft. A simulation of the two-dimensional incompressible lift jet in ground proximity is based on solution of the Reynolds-averaged Navier-Stokes equations and a turbulence-model equation which are written in stream function-vorticity form and are solved using Hoffman's augmented-central-difference algorithm. The resulting equations and their shortcomings are discussed when the technique is extended to two-dimensional compressible and three-dimensional incompressible flows.

Bower, W. W.↗
NASA NTRS1980

Loss model for off-design performance analysis of radial turbines with pivoting-vane, variable-area stators

An off-design performance loss model for a radial turbine with pivoting, variable-area stators is developed through a combination of analytical modeling and experimental data analysis. A viscous loss model is used for the variation in stator loss with setting angle, and stator vane end-clearance leakage effects are predicted by a clearance flow model. The variation of rotor loss coefficient with stator setting angle is obtained by means of an analytical matching of experimental data for a rotor that was tested with six stators, having throat areas from 20 to 144% of the design area. An incidence loss model is selected to obtain best agreement with experimental data. The stator vane end-clearance leakage model predicts increasing mass flow and decreasing efficiency as a result of end-clearances, with changes becoming significantly larger with decreasing stator area.

Meitner, P. L.↗
NASA NTRS1986

Thermophysical aspects of re-entry flows

The present conference discusses low density aerothermodynamics, the drag of bodies in rarefied hypersonic flow, transitional hypervelocity aerodynamic simulation and scaling, high temperature kinetics and transport properties, electron-nitrogen molecule collisions in high temperature nonequilibrium air, theoretical studies of dissociative recombination, the transport properties of some atom/ion interactions in air, and the interaction energies, dipole transition moments, and transport cross sections of N(+)-N and O(+)-O. Also discussed are the results of studies of potential fluid mechanisms for enhanced stagnation heating, vortex-induced leeward heating on a biconic at Mach 6 and 10, the effects of surface discontinuities on convective heat transfer in hypersonic flow, computational convergence in chemical reacting flows, and three-dimensional viscous shock layer applications for the Space Shuttle Orbiter.

Moss, J. N.↗