Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vector field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Digital Particle Image Velocimetry (DPIV) Used for Space-Time Correlations in Nozzle Flow

An optical measurement technique known as Digital Particle Image Velocimetry (DPIV) was used previously to characterize the first- and second-order statistical properties of both cold and hot jet flows from externally mixed nozzles in NASA Glenn Research Center's Nozzle Acoustic Test Rig. In this technique, an electronic camera records particles entrained in a flow as a laser light sheet is pulsed at two instances in time. Correlation processing of the recorded particle image pairs yields the two-component velocity field across the imaged plane of the flow. The information acquired using DPIV is being used to improve our understanding of the decay of turbulence in jet flows-a critical element for understanding the acoustic properties of the flow. Recently, two independent DPIV systems were installed in Glenn's Small Hot Jet Acoustic Rig, enabling multiplane correlations in time and space. The data were collected over a range of different Mach numbers and temperature ratios. DPIV system 1 was fixed to a large traverse rig, and DPIV system 2 was mounted on a small traverse system mounted on the large traverse frame. The light sheets from the two DPIV systems were aligned to lie in the same axial plane, with DPIV system 2 being independently traversed downstream along the flow direction. For each measurement condition, the DPIV systems were started at a fully overlapping orientation. A polarization separation technique was used to avoid cross-talk between the two systems. Then, the DPIV systems fields were shifted axially apart, in successively increasing steps. The downstream DPIV system 2 was triggered at a short time delay after the upstream DPIV system 1, where the time delay was proportional to the convective flow velocity in the shear layer of the jet flow and the axial separation of the two DPIV systems. The acquired data were processed to obtain the instantaneous velocity vector maps over a range of time delays and spatial separations. The velocity fields from the different DPIV systems were then cross-correlated to determine the degree of correlation remaining in the flow as the downstream convection distance was increased. The new data provide Lagrangian measurements of the convective turbulent structures in the shear layer of an exhaust nozzle. These measurements, obtained in both cold and hot flows, will be used to validate and correct models for space-time velocity correlations-long a missing key to predicting jet noise.

Wernet, Mark P.↗
NASA NTRS1994

Monitoring sea ice flux through Fram Strait

A methodology for estimating daily ice velocity through Fram Strait is presented. Ice velocity fields are estimated from a combination of motions observed by SAR (Synthetic Aperture Radar) or buoys and drift estimated by a simple wind drift model. The analysis includes ice motion vectors from approximately 300 pairs of ERS-1 images, Feb. - Jun. 1993. ESA UILR8 low resolution images derived from the Fast Delivery (FD) products are analyzed to produce ice velocity vectors using a semi-automated interactive approach. This method reveals substantial variability in the ice motion field that would not be apparent from a single data source.

Schweiger, Axel J.↗
NASA NTRS1991

Spatio-temporal contextual classification based on Markov random field model

A contextural classifier based on a Markov random field model, which can utilize both spatial and temporal contexts, is investigated. Spatial and temporal neighbors are defined, and the class assignment of each pixel is assumed to be dependent only on the measurement vectors of itself and those of its spatial and temporal neighbors according to the Markov random field property. Only interpixel class dependency context is used in the classification. The joint prior probability of the classes of each pixel and its spatial and temporal neighbors are modeled by a Gibbs random field. The classification is performed in a recursive manner. Experiments with multi-temporal Thematic Mapper data show promising results.

Jeon, Byeungwoo↗
NASA NTRS1997

Radar Monitoring of Wetlands for Malaria Control

Malaria is the most important vector-borne tropical disease (Collins and Paskewitz, 1995) and there is no simple and universally applicable form of vector control. While new methods such as malaria vaccine or genetic manipulation of mosquitoes are being explored in the laboratories, the need for more field research on malaria transmission remains very strong. For the foreseeable future many malaria programs must focus on controlling the vector, the anopheline mosquito, often under the specter of shrinking budgets. Therefore information on which human populations are at the greatest risk is especially valuable when allocating scarce resources. The goal of the Radar Monitoring of Wetlands for Malaria Control Project is to demonstrate the feasibility of using Radarsat or other comparable satellite radar imaging systems to determine where and when human populations are at greatest risk for contracting malaria. The study area is northern Belize, a region with abundant wetlands and a potentially serious malaria problem. A key aspect of this study is the analysis of multi-temporal satellite imagery to track seasonal flooding of anopheline mosquito breeding sites. Radarsat images of the test site in Belize have been acquired one to three times a month over the last year, however,, to date only one processed image has been received from the Alaska SAR Facility for analysis. Therefore analysis at this stage is focussed on determining the radar backscatter characteristics of known anopheline breeding sites, with future work to be dedicated toward seasonal changes.

Pope, Kevin O.↗
NASA NTRS1990

Polarization studies of Zeeman affected spectral lines using the MSFC magnetograph

The Marshall Space Flight Center (MSFC) vector magnetograph records polarization images of absorption lines that are sensitive to magnetic fields. A method is presented for analyzing the Stokes spectral-line profiles of a photospheric Fe I absorption line (5250.2 A) which is influenced by the Zeeman effect. Using nonlinear least-square optimization, the observed Stokes profiles are compared with those generated from the theoretical solution of the polarized radiative transfer equations. The optimization process accounts for the spectral convolution of the source and the MSFC vector magnetograph. The resulting physical properties of the active region producing the polarized light are discussed.

Balasubramaniam, K. S.↗
NASA NTRS1981

Investigations of medium wavelength magnetic anomalies in the eastern Pacific using MAGSAT data

The suitability of using magnetic field measurements obtained by MAGSAT is discussed with regard to resolving the medium wavelength anomaly problem. A procedure for removing the external field component from the measured field is outlined. Various methods of determining crustal magnetizations are examined in light of satellite orbital parameters resulting in the selection of the equivalent source technique for evaluating scalar measurements. A matrix inversion of the vector components is suggested as a method for arriving at a scalar potential representation of the field.

Harrison, C. G. A.↗
NASA NTRS1976

Field-aligned currents in the Jovian magnetosphere - Pioneer 10 and 11

Field-aligned currents, which are known to play an important role in the dynamics of the earth's magnetosphere, would also be expected to flow in the Jovian magnetosphere during magnetically active periods. Such currents are difficult to observe largely because of their limited spatial extent and intermittent nature, but on the Pioneer 11 inbound pass to Jupiter on day 336, 1800 GRT, near the L shell of Ganymede, the helium vector magnetometer recorded a structured perturbation with the characteristic signature of a field-aligned current. No analogous structure was found on a similar Pioneer 10 inbound pass (day 337, 1200 GRT). The perturbation could have been caused by turbulence with the wake of Ganymede through which the spacecraft was moving or the perturbation could represent the first observation of a Jovian substorm. The observations are discussed in terms of both models, and difficulties are examined.

Kivelson, M. G.↗
NASA NTRS1973

Adaptive training class statistics.

Formulas are derived for updating the mean vector and covariance matrix of a training class as new training fields are included and old training fields deleted from the class. These statistics of the class are expressed in terms of the already available statistics of the fields.

Kan, E. P. F.↗
NASA NTRS1980

The Magsat precision vector magnetometer

This paper examines the Magsat precision vector magnetometer which is designed to measure projections of the ambient field in three orthogonal directions. The system contains a highly stable and linear triaxial fluxgate magnetometer with a dynamic range of + or - 2000 nT (1 nT = 10 to the -9 weber per sq m). The magnetometer electronics, analog-to-digital converter, and digitally controlled current sources are implemented with redundant designs to avoid a loss of data in case of failures. Measurements are carried out with an accuracy of + or - 1 part in 64,000 in magnitude and 5 arcsec in orientation (1 arcsec = 0.00028 deg).

Acuna, M. H.↗
NASA NTRS1981

Thermal iron ions in high speed solar wind streams. II - Temperatures and bulk velocities

Mitchel and Roelof (1980) reported the detection of iron in high speed solar wind flows using the small, but finite sensitivity of solid state detectors to Fe ions in the low energy (50-200 keV protons) L1 channel of the NOAA/JHU energetic particle experiment (EPE). In the current investigation, the EPE response is modeled to a convected Maxwellian to obtain the thermal velocity, flow angle, and bulk velocity of the iron distribution. It is assumed that the iron bulk flow velocity can be represented as a vector sum of the hydrogen bulk velocity and an interplanetary magnetic field (IMF) aligned velocity increment. It is found that the velocity increment is smaller than the local Alfven speed in magnitude, and that the iron thermal velocity is comparable with or greater than the proton thermal velocity, with the 'thermal' velocity defined as the square root of 2kT/m.

Mitchell, D. G.↗
NASA NTRS1984

Radiative transfer theory for active remote sensing of a layer of nonspherical particles

The radiative transfer theory is applied to calculate the scattering by a layer of randomly positioned and oriented nonspherical particles. The scattering amplitude functions of each individual particle are calculated with Waterman's T matrix method, which utilizes vector spherical wave functions for expansion of incident, scattered, and surface fields. The orientation of the particles is described by a probability density function of the Eulerian angles of rotation. A rotation matrix is used to relate the T matrix of the principal frame to that of the natural frame of the particle. The extinction matrix and phase matrix of the radiative transfer equations are expressed in terms of the T matrix elements. The extinction matrix for nonspherical particles is generally nondiagonal. There are only two attenuation rates in a specified direction of propagation. The radiative transfer equations are solved by an iterative method to first order in albedo. Numerical results are illustrated as functions of incidence angle and frequency with applications to active remote sensing.

Tsang, L.↗
NASA NTRS1991

Design of thrust vectoring exhaust nozzles for real-time applications using neural networks

Thrust vectoring continues to be an important issue in military aircraft system designs. A recently developed concept of vectoring aircraft thrust makes use of flexible exhaust nozzles. Subtle modifications in the nozzle wall contours produce a non-uniform flow field containing a complex pattern of shock and expansion waves. The end result, due to the asymmetric velocity and pressure distributions, is vectored thrust. Specification of the nozzle contours required for a desired thrust vector angle (an inverse design problem) has been achieved with genetic algorithms. This approach is computationally intensive and prevents the nozzles from being designed in real-time, which is necessary for an operational aircraft system. An investigation was conducted into using genetic algorithms to train a neural network in an attempt to obtain, in real-time, two-dimensional nozzle contours. Results show that genetic algorithm trained neural networks provide a viable, real-time alternative for designing thrust vectoring nozzles contours. Thrust vector angles up to 20 deg were obtained within an average error of 0.0914 deg. The error surfaces encountered were highly degenerate and thus the robustness of genetic algorithms was well suited for minimizing global errors.

Prasanth, Ravi K.↗
NASA NTRS1992

Optical synthesizer for a large quadrant-array CCD camera: Center director's discretionary fund

The objective of this program was to design and develop an optical device, an optical synthesizer, that focuses four contiguous quadrants of a solar image on four spatially separated CCD arrays that are part of a unique CCD camera system. This camera and the optical synthesizer will be part of the new NASA-Marshall Experimental Vector Magnetograph, and instrument developed to measure the Sun's magnetic field as accurately as present technology allows. The tasks undertaken in the program are outlined and the final detailed optical design is presented.

Hagyard, Mona J.↗
NASA NTRS1991

Solidification processing superalloys in an electric field

The phase morphology of a given superalloy's microstructure is established during solidification. Solidification-processing in an applied electric field is a technique currently undergoing experimental characterization at NASA-Marshall. The method is predicated on the simplest model of a metallic solid, in which ions are arranged in basic space lattices that are permeated by an 'electron gas' whose valence electrons are free to move in the solid. When in a superheated liquid state, the metal is seen as a dense 'cold plasma' of electrons and ions. The application of an electric field during solidification establishes a steady, continuous current flow; the direction of propagation of the plasma waves coincides with the direction of the electric field. Such an alignment introduces an ordered arrangement of the electric vectors and introduces an additional degree of order in an already highly ordered alloy.

Ahmed, Shaffiq↗
NASA NTRS1992

The 3D modeling of high numerical aperture imaging in thin films

A modelling technique is described which is used to explore three dimensional (3D) image irradiance distributions formed by high numerical aperture (NA is greater than 0.5) lenses in homogeneous, linear films. This work uses a 3D modelling approach that is based on a plane-wave decomposition in the exit pupil. Each plane wave component is weighted by factors due to polarization, aberration, and input amplitude and phase terms. This is combined with a modified thin-film matrix technique to derive the total field amplitude at each point in a film by a coherent vector sum over all plane waves. Then the total irradiance is calculated. The model is used to show how asymmetries present in the polarized image change with the influence of a thin film through varying degrees of focus.

Flagello, D. G.↗
NASA NTRS1993

Quaternion normalization in spacecraft attitude determination

Attitude determination of spacecraft usually utilizes vector measurements such as Sun, center of Earth, star, and magnetic field direction to update the quaternion which determines the spacecraft orientation with respect to some reference coordinates in the three dimensional space. These measurements are usually processed by an extended Kalman filter (EKF) which yields an estimate of the attitude quaternion. Two EKF versions for quaternion estimation were presented in the literature; namely, the multiplicative EKF (MEKF) and the additive EKF (AEKF). In the multiplicative EKF, it is assumed that the error between the correct quaternion and its a-priori estimate is, by itself, a quaternion that represents the rotation necessary to bring the attitude which corresponds to the a-priori estimate of the quaternion into coincidence with the correct attitude. The EKF basically estimates this quotient quaternion and then the updated quaternion estimate is obtained by the product of the a-priori quaternion estimate and the estimate of the difference quaternion. In the additive EKF, it is assumed that the error between the a-priori quaternion estimate and the correct one is an algebraic difference between two four-tuple elements and thus the EKF is set to estimate this difference. The updated quaternion is then computed by adding the estimate of the difference to the a-priori quaternion estimate. If the quaternion estimate converges to the correct quaternion, then, naturally, the quaternion estimate has unity norm. This fact was utilized in the past to obtain superior filter performance by applying normalization to the filter measurement update of the quaternion. It was observed for the AEKF that when the attitude changed very slowly between measurements, normalization merely resulted in a faster convergence; however, when the attitude changed considerably between measurements, without filter tuning or normalization, the quaternion estimate diverged. However, when the quaternion estimate was normalized, the estimate converged faster and to a lower error than with tuning only. In last years, symposium we presented three new AEKF normalization techniques and we compared them to the brute force method presented in the literature. The present paper presents the issue of normalization of the MEKF and examines several MEKF normalization techniques.

Deutschmann, J.↗
NASA NTRS1990

Theoretical and numerical difficulties in 3-D vector potential methods in finite element magnetostatic computations

This paper describes the results of application of three well known 3D magnetic vector potential (MVP) based finite element formulations for computation of magnetostatic fields in electrical devices. The three methods were identically applied to three practical examples, the first of which contains only one medium (free space), while the second and third examples contained a mix of free space and iron. The first of these methods is based on the unconstrained curl-curl of the MVP, while the second and third methods are predicated upon constraining the divergence of the MVP 10 zero (Coulomb's Gauge). It was found that the two latter methods cease to give useful and meaningful results when the global solution region contains a mix of media of high and low permeabilities. Furthermore, it was found that their results do not achieve the intended zero constraint on the divergence of the MVP.

Demerdash, N. A.↗