Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Metal–insulator phase transition in hydrogenated thin films of V{sub 2}O{sub 3}

Temperature dependences of the electrical conductivity of thin vanadium sesquioxide V{sub 2}O{sub 3} films obtained by using the laser sputtering technique have been studied. A significant decrease (by four–five orders of magnitude) in the electrical conductivity has been observed below 150 K as a result of a metal–insulator phase transition. It is shown that hydrogenation of films lowers the temperature of this phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The cell-in-series method: A technique for accelerated electrode degradation in redox flow batteries

Here, we demonstrate a novel method to accelerate electrode degradation in redox flow batteries and apply this method to the all-vanadium chemistry. Electrode performance degradation occurred seven times faster than in a typical cycling experiment, enabling rapid evaluation of materials. This method also enables the steady-state study of electrodes. In this manner, it is possible to delineate whether specific operating conditions induce performance degradation; we found that both aggressively charging and discharging result in performance loss. Post-mortem x-ray photoelectron spectroscopy of the degraded electrodes was used to resolve the effects of state of charge (SoC) and current on the electrode surface chemistry. For the electrode material tested in this work, we found evidence that a loss of oxygen content on the negative electrode cannot explain decreased cell performance. Furthermore, the effects of decreased electrode and membrane performance on capacity fade in a typical cycling battery were decoupled from crossover; electrode and membrane performance decay were responsible for a 22% fade in capacity, while crossover caused a 12% fade.

25 ENERGY STORAGE↗

Two new transition-metal complexes (TMCs)-templated three-dimensional supramolecular networks based on tungstovanadophosphates

Two new polyoxometalates [Ni(phen){sub 3}][Ni(en){sub 3}][Ni(en){sub 2}(H{sub 2}O){sub 2}][Ni(en){sub 2}]{sub 0.5}[PW{sup VI}{sub 7}W{sup V}{sub 2}V{sup IV}{sub 3}O{sub 40}(V{sup IV}O) {sub 2}].6H{sub 2}O (1) and [Ni(phen){sub 3}]{sub 2}[Ni(en){sub 2}]Na[PW{sup VI}{sub 7}W{sup V}{sub 2}V{sup IV}{sub 3}O{sub 40}(V{sup IV}O){sub 2}].8H{sub 2}O (2) (en=ethylenediamine, phen=1,10-phenanthroline) have been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction, IR, EPR, XPS, elemental analysis and thermogravimetry. Their structures exhibit interesting 3D supramolecular networks, and contain new bicapped (pseudo-) Keggin-type tungsten-vanadium cluster and the template transition-metal complexes (TMCs) being generated in situ under mild hydrothermal conditions. Interestingly, compound 1 contains four different kinds of nickel complex countercations. - Graphical abstract: The structures of [Ni(phen){sub 3}][Ni(en){sub 3}][Ni(en){sub 2}(H{sub 2}O){sub 2}][Ni(en){sub 2}]{sub 0.5}[PW{sup VI}{sub 7}W{sup V}{sub 2}V{sup IV}{sub 3}O{sub 40} (V{sup IV}O){sub 2}].6H{sub 2}O (1) and [Ni(phen){sub 3}]{sub 2}[Ni(en){sub 2}]Na[PW{sup VI}{sub 7}W{sup V}{sub 2}V{sup IV}{sub 3}O{sub 40}(V{sup IV}O){sub 2}].8H{sub 2}O (2) exhibit interesting 3D supramolecular networks constructed by bicapped Keggin heteropolyanions and the in situ templates transition metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemically Triggered Metal-Insulator Transition between VO 2 and V 2 O 5

Distinct properties of multiple phases of vanadium oxide (VO x ) render this material family attractive for advanced electronic devices, catalysis, and energy storage. In this work, phase boundaries of VO x are crossed and distinct electronic properties are obtained by electrochemically tuning the oxygen content of VO x thin films under a wide range of temperatures. Reversible phase transitions between two adjacent VO x phases, VO 2 and V 2 O 5 , are obtained. Cathodic biases trigger the phase transition from V 2 O 5 to VO 2 , accompanied by disappearance of the wide band gap. The transformed phase is stable upon removal of the bias while reversible upon reversal of the electrochemical bias. The kinetics of the phase transition is monitored by tracking the time-dependent response of the X-ray absorption peaks upon the application of a sinusoidal electrical bias. The electrochemically controllable phase transition between VO 2 and V 2 O 5 demonstrates the ability to induce major changes in the electronic properties of VO x by spanning multiple structural phases. This concept is transferable to other multiphase oxides for electronic, magnetic, or electrochemical applications.

36 MATERIALS SCIENCE↗

Strong Photon‐Magnon Coupling Using a Lithographically Defined Organic Ferrimagnet

Abstract A cavity‐magnonic system composed of a superconducting microwave resonator coupled to a magnon mode hosted by the organic‐based ferrimagnet vanadium tetracyanoethylene (V[TCNE] x ) is demonstrated. This work is motivated by the challenge of scalably integrating a low‐damping magnetic system with planar superconducting circuits. V[TCNE] x has ultra‐low intrinsic damping, can be grown at low processing temperatures on arbitrary substrates, and can be patterned via electron beam lithography. The devices operate in the strong coupling regime, with a cooperativity exceeding 1000 for coupling between the Kittel mode and the resonator mode at T≈0.4 K, suitable for scalable quantum circuit integration. Higher‐order magnon modes are also observed with much narrower linewidths than the Kittel mode. This work paves the way for high‐cooperativity hybrid quantum devices in which magnonic circuits can be designed and fabricated as easily as electrical wires.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoinduced Melting of V 4 O 7 Correlated State

The compound V 4 O 7 is one of the Magnéli phase (V n O 2n - 1 , n = 3, 4, …, 9) correlated vanadium oxides with distinct intriguing electronic and structural properties. The possibility to manipulate the phase state of V 4 O 7 on an ultrafast time scale by light makes this material promising for potential applications in photonics, optoelectronics, quantum, and neuromorphic circuit design. In this work, the ultrafast spectroscopy of V 4 O 7 reveals the second-order nature of the photoinduced insulator-to-metal transition, emphasizing electronic and lattice contributions. The findings reveal the influence of the laser excitation level and temperature on these dynamics, providing a comprehensive understanding of V 4 O 7 structural changes and response to external stimuli. The phenomenological model based on the Landau–Ginzburg formalism provides a robust framework for explaining the photoinduced transition dynamics, showing a detailed picture of the light interaction with the electronic and lattice subsystems. This integrated approach significantly enhances the understanding of V 4 O 7 complex behavior upon photoexcitation, opening new possibilities for developing new optoelectronic devices and noninvasive optical control of the phase transition pathways in vanadates.

36 MATERIALS SCIENCE↗

Rational optimization of substituted α–MnO 2 cathode for aqueous zinc–ion battery

Density functional theory (DFT) is utilized to explore the effects of increasing concentrations of vanadium (V) and chromium (Cr) substitution on the discharge of α-MnO 2 cathode in hydrated zinc-ion batteries (ZIBs). During H + -intercalation and Zn 2+ -intercalation, Cr-substitution proves to be more effective than V-substitution in promoting discharge behaviors. Transitioning from Mn 0.875 Cr 0.125 O 2 , Mn 0.75 Cr 0.25 O 2 to Mn 0.625 Cr 0.375 O 2 is found to consistently enhance the discharge voltage, along with improved tunnel structure retention and volume expansion suppression. In comparison, the promoting effect of increasing V-substitution is relatively small at initial discharge stages and leads to degradation at later stages, primarily due to an increased concentration of unstable Mn 2+ ion. The superior effect of Cr-substitution is attributed to the unique atomic and electronic structures of substituted Cr 4+ and reduced Cr 3+ ions during discharge. These ions serve as active electron acceptors to limit the formation of Mn 3+ and Mn 2+ ions, and as anchors to stabilize the α-MnO 2 framework and intercalated H + /Zn 2+ ions, respectively. Finally, our study highlights fine-tuning through substitution to enhance the performance of α-MnO 2 -based cathode materials in ZIBs.

25 ENERGY STORAGE↗

Preparation, Characterization and Dye Adsorption/Reuse of Chitosan-Vanadate Films

Chitosan used on dyes adsorption when in film form shows limitations due to its low regeneration capacity. In this work, chitosan films were modified using vanadium ions to improve its regeneration capacity on the dye adsorption. Films were characterized and analyzed by FT-IR, XRD and DSC. Adsorption assays were performed using chitosan-vanadate films (CVF) to remove the Reactive Black 5 dye in aqueous solution. The adsorption was favored by the pH decrease from 8.0 to 4.0. The equilibrium data were best fitted by Langmuir model, with q{sub m} of 522 mg g{sup −1} at 298 K. The negative value of ΔH{sup 0} (−9.91 kJ mol{sup −1}) showed an exothermic operation and the value of ΔS{sup 0} was positive (0.0705 kJ mol{sup −1} K{sup −1}), suggesting an increase in randomness at the solid/solution interface. The kinetics was represented by pseudo-first order model and around 80 min occurred a reduction in the adsorption rates, due to the mass transfer mechanism. The most appropriate eluent to remove the RB5 from CVF was NH{sub 4}OH 0.01 kg mol L{sup −1}. The CVF used to the dye adsorption were regenerated and reutilized five times, and the adsorption capacity was around 80% of the initial value after the last cycle.

36 MATERIALS SCIENCE↗

Electronic Structure and Magnetic Properties of V-Monodoped and (V, Al)-Codoped 4H-SiC

Electronic structure and magnetic properties of vanadium (V)-doped 4H-SiC are researched by using the first-principle plane wave pseudopotential method based on density functional theory. Ten kinds of doping position are calculated and the most stable configuration is found. The results indicate that V-monodoped 4H-SiC favors a spin-polarized state and the magnetic moment mainly comes from the unpaired 3d electronic of V atoms. Several doping configurations studied suggest the existence of ferromagnetic coupling between V dopant. Ferromagnetic order is activated by V doping via a V{sub 0}:3d-C:2p-V{sub 7}:3d coupling chain. Hybridization occurs between p − d orbitals. The doped V atom will induce additional holes carrier into the 4H-SiC. Al itself has no contribution to the magnetic moment, whereas V- and Al-codoped 4H-SiC can induce spin polarization, which reveals that the FM stability is reduced significantly by Al codoping. The calculated electronic structure implies that the presence of Si vacancies (V{sub si}) weakens the FM state of V- and V{sub si}-codoped 4H-SiC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Magnetic, and XPS Studies of the Double-Perovskite Mn{sub 2}VSbO{sub 6}

The double-perovskite Mn{sub 2}VSbO{sub 6} has been synthesized by solid-state reaction under pressure at 6 GPa and temperature of 1200°C, and its crystal structure has been refined by X-ray powder diffraction date. Mn{sub 2}VSbO{sub 6} crystallizes in monoclinic space group P12{sub 1}/n1 with the following parameters: a = 5.2340 Å (2), b = 5.3932 Å (2), c = 7.6460 Å (3), β = 89.6075° (23), V = 215.826 Å{sup 3} (14), Z = 2. It found that V and Sb atoms are completely ordered in 2d and 2c positions of double-perovskite structure, respectively. According to XPS measurements, manganese in this compound is present as Mn{sup 2+}, while vanadium is V{sup 3+}. The magnetization date suggests that Mn{sub 2}VSbO{sub 6} transforms to an antiferromagnetic state due to simultaneous ordering of V{sup 3+} and Mn{sup 2+} magnetic sublattices at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Half-Metallic Ferromagnetism in V-Doped FmP Binary Monopnictide Compounds: an Ab Initio Calculations

The ab initio calculations of the structural phase stability, magnetic phase stability, and electronic and magnetic properties of the FmP binary monopnictides and the half-metallic ferromagnetic properties of their Fm{sub 1−x}V{sub x}P (for x = 0.25, 0.50, 0.75, and 1)-doped alloys have been assured through the spin-polarized density functional theory (DFT), and they are performed by employing the full-potential linearized augmented plane waves plus local orbitals (FP-L/APW + lo) method that is implemented in the WIEN2k package. The exchange and correlation potential is parameterized by the generated gradient approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) scheme. According to the studies of the magnetic phase stability, the fermium monopnictides (FmP) have a paramagnetic regime, while the ferromagnetic behavior appears when we dope this compound with vanadium. Through the ferromagnetic character of all Fm{sub 1−x}V{sub x}P alloys, the spin-polarized band structures and densities of states exhibit a nearly half-metallic character of Fm{sub 0.75}V{sub 0.25}P alloy, whereas Fm{sub 0.50}V{sub 0.50}P, Fm{sub 0.25}V{sub 0.75}P, and VP compounds showed metallic character. Moreover, the total magnetic moment of the three ternary alloys is mainly contributed by Fm and V elements, where the p-d hybridization reduces the atomic magnetic moment of V element from its free space charge and produces feeble magnetic moments on the nonmagnetic P sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable near-perfect absorption through interaction between localized surface plasmons modes in optical metamaterials

A hybrid metamaterial absorber is designed and simulated in 4.0–6.0 μm region based on temperature sensitive material vanadium dioxide (VO{sub 2}). A broad absorption band (bandwidth is 0.28 μm) is achieved based on two local surface plasmon (LSP) modes resonance at room temperature. The effective parameter calculation results indicate that near ideally impedance matching condition is achieved in the absorption band. The absorption band is expanded and shifted to longer resonance wavelength with the lattice constant reducing or the size of central metal particle increasing. Furthermore, new resonant absorption behaviors are achieved through rising the simulated temperature. A new absorption peak is obtained due to the coupled between LSP modes, which are excited on edges of VO{sub 2} particles, while the original absorption band is shifted to longer resonance wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Morphology, UV–visible and ellipsometric studies of sodium lithium orthovanadate

Sodium lithium orthovanadates were prepared by the classic ceramic method technique. Structure, phase purity, composition, and morphology were characterized by X-ray powder diffraction, infrared spectroscopy, energy dispersive spectroscopy, scanning-electron microscopy and atomic force microscopy. The optical properties of Na{sub x}Li{sub 1−x}CdVO{sub 4} (x = 0.5, 1) compounds prepared were recorded at room temperature using ultra-visible and ellipsometric spectroscopies in the spectral range (200–800) nm. The average reflectance of the pellets showed high reflectivity (over 80%) in the visible spectrum. The UV–Vis absorption bands are assigned to the charge transfer from the oxygen ligands to the central vanadium atom inside the [VO{sub 4}]{sup 3−} groups in the orthovanadate compounds. The optical band gaps E{sub g} of both samples are evaluated using Kubelka–Munk function. The analysis of the data revealed the existence of optical allowed direct transition for Na{sub x}Li{sub 1−x}CdVO{sub 4} (x = 0.5, 1). Spectroscopic ellipsometry measurements have been performed on Na{sub x}Li{sub 1−x}CdVO{sub 4} (x = 0.5, 1) specimens and their optical properties were analyzed using the Cauchy model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A switchable polarization-independent THz absorber using a phase change material

In this paper, we propose a tunable polarization-insensitive multi-frequency and broadband absorber (TMBA) based on a phase change material, which is vanadium dioxide (VO{sub 2}). Compared with the prior works, the operation state of such a TMBA can be regulated by the temperature. When the temperature is 350 K, the proposed TMBA can act as an broadband absorber, whose absorption region (absorption is over 90%) runs from 10.04 to 16.22 THz at normal incidence. When the temperature is 300 K and the incident angle is normal, such a TMBA can work as a multi-frequency absorber that has five absorption frequency points exceeding 90%, which are situated at 6.11 THz, 9.51 THz, 12.81 THz, 16.07 THz and 17.55 THz, respectively. To figure out the physical mechanism, the electric field, the surface current and the power loss density of the TMBA are presented, and effect of incident angle and structural parameters on the performance of this TMBA also is given. The results show that, with the incident angle increasing, the absorption of this TMBA is reduced. Such a TMBA can be used as a solar energy harvesting.

14 SOLAR ENERGY↗

Chromatographic isolation of vanadyl porphyrins from heavy oil resins

A broad fraction of petroleum vanadyl porphyrins of high spectral purity was isolated from heavy oil resins with high vanadium content using a two-step chromatographic method. At the first step, the primary concentrate of vanadyl porphyrins was separated from the resins on the silica gel column. At the second step, it was further purified by the gradient elution through the column packed with sulfo-cationite. According to UV—VIS spectroscopy, this technique allows one to isolate up to 70% of vanadyl porphyrins with the spectral purity corresponding to the best results of other purification methods providing only narrow fractions of vanadyl porphyrins of comparable purity. Deoxophylloerythroetioporphyrin (DPEP) and etioporphyrin (Etio) series of vanadyl porphyrins with the carbon number range of C{sub 28}—C{sub 42} and DPEP/ Etio ratio equal to 1.18 were identified by MALDI-TOF mass-spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Influence of the Regimes of Thermomechanical Treatments on the Features of Heterophase and Grain Structure of A V–Cr–Zr–Ta Alloy

A comparative investigation of the influence of thermomechanical treatment modes on the structural-phase state and mechanical properties of a V–Cr–Zr–Ta low-activation vanadium alloy is performed. It is demonstrated that the use of thermomechanical treatment improves the level of short-term strength at room and elevated temperatures. The alloy is characterized by high ductility in a wide range of temperatures irrespective of the regimes of thermomechanical treatment. It is found out that the V–Cr–Zr–Ta alloy possesses higher thermal microstructure stability and mechanical properties compared to those of the V–Ti–Cr alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Equilibria in the TiO{sub 2}-Rich Part of the TiO{sub 2}-CaO-SiO{sub 2}-10 Wt Pct Al{sub 2}O{sub 3}-5 Wt Pct MgO System at 1773 K

The phase equilibria of the TiO{sub 2}-CaO-SiO{sub 2}-10 wt pct Al{sub 2}O{sub 3}-5 wt pct MgO system in the TiO{sub 2}-rich part were investigated experimentally at 1773 K using the high-temperature equilibration–quenching method and the electron probe microanalyses. Through this study, the isothermal section of the above system was obtained containing one liquidus region and five solid–liquid coexistence regions. The primary phase region of anosovite was not only found, but it is the optimal composition region that is most beneficial to the anosovite selective crystallization and separation. The phase diagram of the TiO{sub 2}-CaO-SiO{sub 2}-10 wt pct Al{sub 2}O{sub 3}-5 wt pct MgO system in the TiO{sub 2}-rich corner at 1773 K has been established. The obtained phase diagram can provide reliable reference for the slag adjusting during vanadium-titanium magnetites smelting to make sure the resulting Ti-bearing slag can be upgraded using the selective crystallization and phase separation method.

36 MATERIALS SCIENCE↗