Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Fuel-Cladding Eutectic Study of Legacy Fast Flux Test Facility (FFTF) MFF HT9/U-10Zr Metallic Fuel

This report presents the first systematic investigation of fuel-cladding eutectic interaction (FCEI) in irradiated HT9/U-10Zr metallic fuel from the Fast Flux Test Facility (FFTF) Materials Fuels Form (MFF) program, using differential scanning calorimetry (DSC) coupled with scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Two irradiated fuel cross-sections, MNT07H (9.5 at% burnup, x/L = 0.78) and MNT08H (7.0 at% burnup, x/L = 0.93), were subjected to three successive isothermal annealing rounds (R1–R3) at 820°C for 20 minutes each, yielding a cumulative transient duration of one hour. This study directly addresses a recognized gap in the existing FCEI database, which previously lacked irradiated HT9/U-10Zr data at burnup levels above 8 at%. Two principal findings emerge from the study. First, for both samples, FCEI remained spatially confined within the pre-existing fuel-cladding chemical interaction (FCCI) zone boundaries after R3, with no measurable eutectic penetration into unaffected cladding beyond the original FCCI layer. This self-limiting behavior is consistent with historical Fuel Behavior Test Apparatus (FBTA) results and is attributed to the near-eutectic phase composition of the FCCI zone, which rapidly absorb the available eutectic-forming constituents and then stall penetration once the FCCI zone is consumed. A comparison with unirradiated surrogate data further supports this mechanism: whereas a U–34 at.% Fe sample would be expected to show ~176 µm of iron penetration under comparable conditions, the irradiated samples exhibited only ~20 µm, a discrepancy attributed to irradiation-induced interfacial porosity and pre-existing FCCI composition gradients. Second, for MNT08H, FCEI was observed exclusively on the half of the cladding circumference where pre-existing steady-state FCCI was present, with no detectable FCEI on the opposite half. Three hypotheses are proposed to explain this asymmetry: the inhibiting role of a zirconium-rich rind at the fuel-cladding interface; the chemical sequestration of iron by redistributed zirconium within the fuel matrix; and the persistence of fuel-cladding gaps on the FCEI-free half that preclude direct contact. All three hypotheses require further experimental investigation. The results extend the empirical FCEI database into higher-burnup territory and demonstrate the viability of DSC-based testing as a substitute for the no-longer-available FBTA apparatus. Future work will include additional cross-section testing, compilation of the full FCEI dataset, model evaluation, and DSC testing of ternary fuel compositions to broaden the experimental basis for safety assessment of sodium-cooled fast reactor systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1983

Measurement and analysis of critical crack tip processes associated with variable amplitude fatigue crack growth

Crack growth retardation following overloads can result in overly conservative life predictions in structures subjected to variable amplitude fatigue loading when linear damage accumulation procedures are employed. Crack closure is believed to control the crack growth retardation, although the specific closure mechanism is debatable. Information on the relative contributions to crack closure from: (1) plasticity left in the wake of the advancing crack and (2) crack tip residual stresses is provided. The delay period and corresponding crack growth rate transients following overloads are systematically measured as a function of load ratio (R) and overload magnitude. These responses are correlated in terms of the local 'driving force' for crack growth as measured by crack tip opening loads and delta K sub eff. The latter measurements are obtained using a scanning electron microscope equipped with a cyclic loading stage; measurements are quantified using a relatively new stereoimaging technique. Combining experimental results with analytical predictions suggests that both plastic wake and residual stress mechanism are operative, the latter becoming predominate as R increases.

Hudak, S. J., Jr.↗
NASA NTRS1984

Fault tolerant architectures for integrated aircraft electronics systems, task 2

The architectural basis for an advanced fault tolerant on-board computer to succeed the current generation of fault tolerant computers is examined. The network error tolerant system architecture is studied with particular attention to intercluster configurations and communication protocols, and to refined reliability estimates. The diagnosis of faults, so that appropriate choices for reconfiguration can be made is discussed. The analysis relates particularly to the recognition of transient faults in a system with tasks at many levels of priority. The demand driven data-flow architecture, which appears to have possible application in fault tolerant systems is described and work investigating the feasibility of automatic generation of aircraft flight control programs from abstract specifications is reported.

Levitt, K. N.↗
DOE OSTI2020

Structure and Dynamics of Domains in Ferroelectric Nanostructures – Phase-Field Modeling (Final Technical Report)

Domain pattern formation is one of the most common phenomena in nature and is a topic of immense interest in many fields ranging from materials science and physics to chemistry and biology. This DOE sponsored research project explored the basic science concerning the thermodynamic stability of mesoscale polarization domain patterns and their temporal evolution mechanisms during formation and subsequent switching in ferroelectric nanostructures and heterostructures. The project employed the computational phase-field method in combination of microelasticity and electrostatic theories. The research was carried out in close collaboration with a number of experimental groups who used High Resolution Transmission Electron Microscopy (HRTEM), in situ TEM with Scanning Probe Microscopy (SPM), or Piezoresponse Force Microscopy (PFM) to characterize the domain structures and dynamics of ferroelectric thin films and heterostructures and who grow high-quality ferroelectric and multiferroic thin films using advanced growth techniques such as Molecular Beam Epitaxy (MBE), Pulsed Laser Deposition (PLLD), and sputtering. The research efforts of the project help establish the phase-field method as the most powerful method for understanding and predicting domain structures in ferroelectric thin films and nanostructures. The findings of the project led to the basic understanding of stability and switching mechanisms of ferroelectric domains under different mechanical boundary conditions and under either homogeneous capacitor configurations or local fields using metallic probes as electrodes and the emergence of charged domain walls during domain switching. The project predicted the spatial length scales, temperature ranges, and electromechanical conditions for different polar states in heterostructures and guided the discovery of both transient and stable novel polarization states containing vortex lattices in oxide superlattices. The project resulted in 134 journal publications and 6 PhD theses with all the PhD graduates currently working in either academia or industry within the United States. The basic understanding on the stability of mesoscale polar states and pattern evolution achieved by the project improved our ability to control and engineer properties of ferroelectric thin films and heterostructures for potential applications in nanoscale electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Primary donor triplet states of Photosystem I and II studied by Q-band pulse ENDOR spectroscopy

The photoexcited triplet state of the “primary donors” in the two photosystems of oxygenic photosynthesis has been investigated by means of electron-nuclear double resonance (ENDOR) at Q-band (34 GHz). The data obtained represent the first set of 1 H hyperfine coupling tensors of the 3 P700 triplet state in PSI and expand the existing data set for 3 P680. We achieved an extensive assignment of the observed electron-nuclear hyperfine coupling constants (hfcs) corresponding to the methine α-protons and the methyl group β-protons of the chlorophyll (Chl) macrocycle. The data clearly confirm that in both photosystems the primary donor triplet is located on one specific monomeric Chl at cryogenic temperature. In comparison to previous transient ENDOR and pulse ENDOR experiments at standard X-band (9–10 GHz), the pulse Q-band ENDOR spectra demonstrate both improved signal-to-noise ratio and increased resolution. The observed ENDOR spectra for 3 P700 and 3 P680 differ in terms of the intensity loss of lines from specific methyl group protons, which is explained by hindered methyl group rotation produced by binding site effects. Contact analysis of the methyl groups in the PSI crystal structure in combination with the ENDOR analysis of 3 P700 suggests that the triplet is located on the Chl a' (P A ) in PSI. The results also provide additional evidence for the localization of 3 P680 on the accessory Chl D1 in PSII.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The Role of the Solvent in the Condensed-Phase Dynamics and Identity of Chemical Bonds: The Case of the Sodium Dimer Cation in THF

When a solute molecule is placed in solution, is it acceptable to presume that its electronic structure is essentially the same as in the gas phase? In this paper, we address this question from a simulation perspective for the case of the sodium dimer cation (Na 2 + ) molecule in both liquid Ar and liquid tetrahydrofuran (THF). In previous work, we showed that when local specific interactions between a solute and solvent are energetically on the order of a hydrogen bond, the solvent can become part of the chemical identity of the solute. Here, using mixed quantum/classical molecular dynamics simulations, we see that for the Na 2 + molecule, solute--solvent interactions lead to two stable, chemically-distinct coordination states (Na(THF) 4 -Na(THF) 5 + and Na(THF) 5 -Na(THF) 5 + ) that are not only stable themselves as gas-phase molecules but that also have a completely new electronic structure with important implications for the excited-state photodissociation of this molecule in the condensed phase. Furthermore, we show through a set of comparative classical simulations that treating the solute's bonding electron explicitly quantum mechanically is necessary to understand both the ground-state dynamics and chemical identity of this simple diatomic molecule; even use of the quantum-derived potential of mean force is insufficient to describe the behavior of the molecule classically. Lastly, we calculate the results of a proposed transient hole-burning experiment that could be used to spectroscopically disentangle the presence of the different coordination states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Identification of dislocation-related and point-defects in III-As layers for silicon photonics applications

Abstract The aim of this paper is to identify, analyze and compare the defects present in III-As, as a function of dislocation density, and as a function of the presence/absence of quantum dots (QDs). Such materials are of fundamental importance for the development of lasers and photodiodes for silicon photonics. The study is based on an extensive deep-level transient spectroscopy investigation, carried out on GaAs pin diodes grown on Si and on GaAs (that differ in the dislocation density), with and without embedded QDs. The original results described in this paper demonstrate that: (a) we were able to identify four different defects within the device grown on Si (three electron and one hole traps) and one defect (hole trap) in the device on GaAs, common to both samples; (b) all the majority carrier traps identified are located near midgap, i.e. are efficient non-radiative recombination centers; (c) such defects are absent (or non-detectable) in the sample grown on GaAs substrate, having a very low dislocation density; (d) the presence of QDs does not result in additional defects within the semiconductor material; (e) the analysis of the capture kinetics revealed that two of the identified traps are related to point defects, whereas the other two traps can be associated with point defects located near a dislocation; (f) a comparison with previous reports indicate that the detected traps are related to native III-As defects, or to oxygen-related complexes.

Physics↗
NASA NTRS2006

Grid Gap Measurement for an NSTAR Ion Thruster

The change in gap between the screen and accelerator grids of an engineering model NSTAR ion optics assembly was measured during thruster operation with beam extraction. The molybdenum ion optics assembly was mounted onto an engineering model NSTAR ion thruster. The measurement technique consisted of measuring the difference in height of an alumina pin relative to the downstream accelerator grid surface. The alumina pin was mechanically attached to the center aperture of the screen grid and protruded through the center aperture of the accelerator grid. The change in pin height was monitored using a long distance microscope coupled to a digital imaging system. Transient and steady-state hot grid gaps were measured at three power levels: 0.5, 1.5 and 2.3 kW. Also, the change in grid gap was measured during the transition between power levels, and during the startup with high voltage applied just prior to discharge ignition. Performance measurements, such as perveance, electron backstreaming limit and screen grid ion transparency, were also made to confirm that this ion optics assembly performed similarly to past testing. Results are compared to a prior test of 30 cm titanium ion optics.

Diaz, Esther M.↗
NASA NTRSDate not supplied

Development of a Venus Surface Wind Sensor

To better understand the atmospheric structure and dynamics on the Venus surface and provide input to climate models, there is a need to measure the wind velocity and direction on the surface and track changes over extended periods. A wind sensor based on a miniature drag-force anemometer is being developed to meet the challenges for wind measurements and operational requirements on the surface of Venus. The sensor materials are chosen to enhance durability and prevent reactivity with the Venus surface atmosphere. Advantages of this approach include that it is independent of variable heat transfer, has been matured in other harsh environment applications, and has a low mass and power requirement. Prototype drag-force anemometers were demonstrated, integrated with a high-temperature operational amplifier, recording transient effects in a simulated Venus surface environment. For multidirectional wind monitoring, the sensors are small enough to be deployed orthogonally as a three-dimensional array on a small arm or mast. This presentation describes the development and demonstration of this miniature drag-force anemometer integrated with high temperature electronics in a simulated Venus surface environment.

wind measurement↗
DOE OSTI2025

Cyclometallated Co(III) Complexes with Lowest-Energy Charge Transfer Excited States Accessible with Visible Light

The Co(III) complexes, cis-[Co(ppy) 2 (L)]PF 6 , where ppy = 2-phenylpyridine and L = bpy (2,2′-bipyridine; 1), phen (1,10-phenanthroline; 2), and DAP (1,12-diazaperylene; 3), are reported and their photophysical properties were investigated to evaluate their potential as sensitizers for applications that include solar energy conversion schemes and photoredox catalysis. Calculations show that cyclometallation in the cis-[Co(ppy) 2 (L)]PF 6 series affords strong Co(dπ)/ppy(π) orbital interactions that result in a Co/ppy(π*) highest occupied molecular orbital (HOMO) and a lowest unoccupied molecular orbital (LUMO) localized on the diimine ligand, L(π*). Complexes 1–3 exhibit relatively invariant oxidation potentials, whereas the reduction event is dependent on the identity of the diimine ligand, L, consistent with the theoretical predictions. For 3 a broad Co/ppy(π*) → L(π*) metal/ligand-to-ligand charge transfer (ML-LCT) absorption band is observed in CH 3 CN with a maxima at 507 nm, extending beyond 600 nm. Upon excitation of the 1ML-LCT transition, transient absorption features consistent with the population of a 3 ML-LCT excited state with lifetimes, τ, of 3.0 ps, 4.6 and 42 ps for 1, 2 and 3 in CH 3 CN respectively are observed. Upon irradiation with 505 nm, 3 is able to reduce methyl viologen (MV 2+ ), an electron acceptor commonly in photocatalytic schemes. Here, to our knowledge, 3 represents the first heteroleptic molecular Co(III) complex that combines cyclometallation with a diimine ligand with lowest-lying metal-to-ligand charge transfer excited states able to undergo photoinduced charge transfer with low-energy green light. As such, the structural design of 3 represents an important step toward d6 photosensitizers based on earth abundant metals.

Energy↗
NASA NTRS2002

Charge Generation and Propagation in Igneous Rocks

Various electrical phenomena have been reported prior to or concurrent with earthquakes such as resistivity changes, ground potentials, electromagnetic (EM), and luminous signals. Doubts have been raised as to whether some of these phenomena are real and indeed precursory. One of the reasons for uncertainty is that, despite decades of intense work, there is still no physically coherent model. Using low- to medium-velocity impacts to measure electrical signals with microsecond time resolution, it has now been observed that when dry gabbro and diorite cores are impacted at relatively low velocities, approximately 100 m/s, highly mobile charge carriers are generated in a small volume near the impact point. They spread through the rocks, causing electric potentials exceeding +400 mV, EM, and light emission. As the charge cloud spreads, the rock becomes momentarily conductive. When a dry granite block is impacted at higher velocity, approximately 1.5 km/s, the propagation of the P and S waves is registered through the transient piezoelectric response of quartz. After the sound waves have passed, the surface of the granite block becomes positively charged, suggesting the same charge carriers as observed during the low-velocity impact experiments, expanding from within the bulk. During the next 2-3 ms the surface potential oscillates, indicating pulses of electrons injected from ground and contact electrodes. The observations are consistent with positive holes, e.g., defect electrons in the O(2-) sublattice, traveling via the O 2p-dominated valence band of the silicate minerals. Before activation, the positive holes lay dormant in the form of electrically inactive positive hole pairs (PHP), chemically equivalent to peroxy links, O3X/OO\XO3, with X=Si(4+), Al(3+), etc. PHPs are introduced into the minerals by way of hydroxyl,O3X-OH, which all nominally anhydrous minerals incorporate when crystallizing in H2O-laden environments. The fact that positive holes can be activated by low-energy impacts, and their attendant sound waves, suggests that they can also be activated by microfracturing. Depending on where in the stressed rock volume the charge carriers are activated, they will form rapidly moving or fluctuating charge clouds that may account for earthquake-related electrical signals and EM emission. Wherever such charge clouds intersect the surface, high fields are expected, causing electric discharges and earthquake lights.

Freund, Friedemann↗
DOE OSTI2020

Exploring the Light-induced Dynamics in Solvated Metallogrid Complexes with Femtosecond Pulses Across the Electromagnetic Spectrum

Oligonuclear complexes of d 4 -d 7 transition metal ion centers that undergo spin-switching have long been developed for their practical role in molecular electronics. Recently, they also have appeared as promising photochemical reactants demonstrating improved stability. However, the lack of knowledge about their photophysical properties in the solution phase compared to their mononuclear congeners is currently hampering their inclusion into advanced light-driven reactions. In the present study, the ultrafast photoinduced dynamics in a solvated [2x2] iron(II) metallogrid complex are characterized by combining transient optical, infrared absorption and X-ray emission spectroscopic measurements on the femtosecond timescale. The analysis is supported by DFT calculations. The photocycle can be described in terms of intra-site transitions, where the Fe II in the low-spin (LS) state are independently photoexcited. The Franck-Condon state decays via the formation of a vibrationally-hot high-spin (HS) state that displays coherent behavior within a few picoseconds and thermalizes within tens of picosecond to yield a metastable HS state living for several hundreds of nanoseconds. Additionally, systematic comparison with the closely related mononuclear complex [Fe(terpy) 2 ] 2+ reveals that nuclearity has a profound impact on the photoinduced dynamics. Finally, this work provides guidelines for expanding the integration of oligonuclear complexes into new photoconversion schemes that may be triggered by ultrafast spin-switching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Floquet engineering of strongly driven excitons in monolayer tungsten disulfide

Interactions of quantum materials with strong-laser fields can induce exotic nonequilibrium electronic states. Monolayer transition-metal dichalcogenides, a new class of direct-gap semiconductors with prominent quantum confinement, offer exceptional opportunities toward Floquet engineering of quasiparticle electron-hole states, or excitons. Strong-field driving has a potential to achieve enhanced control of electronic band structure, thus a possibility to open a new realm of exciton light-matter interactions. However, experimental implementation of strongly-driven excitons has so far remained out of reach. Here, we use mid-infrared laser pulses below the optical bandgap to excite monolayer tungsten disulfide up to a field strength of 0.3 V/nm, and demonstrate strong-field light dressing of excitons in the excess of a hundred millielectronvolt. Our high-sensitivity transient absorption spectroscopy further reveals formation of a virtual absorption feature below the 1s-exciton resonance, which is assigned to a light-dressed sideband from the dark 2p-exciton state. Quantum-mechanical simulations substantiate the experimental results and enable us to retrieve real-space movies of the exciton dynamics. Here, this study advances our understanding of the exciton dynamics in the strong-field regime, and showcases the possibility of harnessing ultrafast, strong-field phenomena in device applications of two-dimensional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrashort XUV pulse absorption spectroscopy of partially oxidized cobalt nanoparticles

High-order harmonic generation (HHG) based transient extreme ultraviolet (XUV) absorption spectroscopy is an emerging technique to trace photoinduced charge carrier dynamics in condensed phase materials with femtosecond and even attosecond temporal resolution and elemental specificity. However, its application to nanoparticulate samples that are relevant, for example, for novel photocatalytic light harvesting concepts, has been limited. This is in part due to the challenge to produce residual-free samples on ultrathin, XUV-transparent substrates as well as a widespread understanding that sparsely distributed nanoparticles do not provide sufficient contrast for XUV absorption measurements. Here, we present static XUV absorption spectra of partially oxidized Co nanowire-structures with diameters of approximately 4.5 nm and lengths between 10 and 40 nm, recorded with an ultrashort pulse HHG light source. Nanoparticles are synthesized by the agglomeration of Co atoms inside superfluid helium droplets, followed by surface deposition and oxidation in ambient air. The method is uniquely suited for residual-free synthesis of transition metal nanowires and their deposition on ultrathin substrates. Analysis by high-resolution transmission electron microscopy reveals the formation of CoO nanowires with regions of unoxidized Co in their interior. The nanoparticle samples are investigated in an HHG-driven ultrafast XUV absorption setup. Despite the low surface coverage of only 23%, the recorded spectrum exhibits a distinct absorption feature at the Co M 2,3 (2p) edge near 60 eV with a peak height of about 40 mOD. Finally, the results support the feasibility of table-top ultrafast transient XUV absorption studies of photoinduced dynamics in transition metal oxide nanoparticles with sub-monolayer surface coverage.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Selective bond scission in formic acid by low-energy electrons

We report recent results of mass-resolved anion fragment momentum imaging experiments to investigate dissociative electron attachment to formic acid, for incident energies between 5 eV and 9 eV. A remarkable site-selectivity is found for a resonance at 8.5 eV by comparing anion fragment yields for two deuterated isotopologues of formic acid. This results in an H – fragment from the O-H bond of the transient anion, with negligible contribution from C-H break. In contrast, a lower-energy resonance at 7.1 eV dissociates by C–H or O–H break to produce H – and the neutral radicals HOCO or HCOO.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1984

The ac power line protection for an IEEE 587 Class B environment

The 587B series of protectors are unique, low clamping voltage transient suppressors to protect ac-powered equipment from the 6000V peak open-circuit voltage and 3000A short circuit current as defined in IEEE standard 587 for Category B transients. The devices, which incorporate multiple-stage solid-state protector components, were specifically designed to operate under multiple exposures to maximum threat levels in this severe environment. The output voltage peaks are limited to 350V under maximum threat conditions for a 120V ac power line, thus providing adequate protection to vulnerable electronic equipment. The principle of operation and test performance data is discussed.

Roehr, W. D.↗