Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “theoretical limits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Stalling of Helicopter Blades

Theoretical studies have predicted that operation of helicopter rotor beyond certain combinations of thrust, forward speed, and rotational speed might be prevented by rapidly increasing stalling of the retreating blade. The same studies also indicate that the efficiency of the rotor will increase until these limits are reached or closely approached, so that it is desirable to design helicopter rotors for operation close to the limits imposed by blade stalling. Inasmuch as the theoretical predictions of blade stalling involve numerous approximations and assumptions, an experimental investigation was needed to determine whether, in actual practice, the stall did occur and spread as predicted and to establish the amount of stalling that could be present without severe vibration or control difficulties being introduced. This report presents the results of such an investigation.

Gustafson, F B↗

SEARCHING FOR GAS GIANT PLANETS ON SOLAR SYSTEM SCALES: VLT NACO/APP OBSERVATIONS OF THE DEBRIS DISK HOST STARS HD172555 AND HD115892

Using the Apodizing Phase Plate (APP) coronagraph of Very Large Telescope/NACO we searched for planetary mass companions around HD115892 and HD172555 in the thermal infrared at 4 {mu}m. Both objects harbor unusually luminous debris disks for their age and it has been suggested that small dust grains were produced recently in transient events (e.g., a collision) in these systems. Such a collision of planetesimals or protoplanets could have been dynamically triggered by yet unseen companions. We did not detect any companions in our images but derived the following detection limits: for both objects we would have detected companions with apparent magnitudes between {approx}13.2 and 14.1 mag at angular separations between 0.''4 and 1.''0 at the 5{sigma} level. For HD115892 we were sensitive to companions with 12.1 mag even at 0.''3. Using theoretical models these magnitudes are converted into mass limits. For HD115892 we would have detected objects with 10-15 M{sub Jup} at angular separations between 0.''4 and 1.''0 (7-18 AU). At 0.''3 ({approx}5.5 AU) the detection limit was {approx}>25 M{sub Jup}. For HD172555 we reached detection limits between 2 and 3 M{sub Jup} at separations between 0.''5 and 1.''0 (15-29 AU). At 0.''4 ({approx}11 AU) the detection limit was {approx}>4 M{sub Jup}. Despite the non-detections, our data demonstrate the unprecedented contrast performance of NACO/APP in the thermal infrared at very small inner working angles and we show that our observations are mostly background limited at separations {approx}>0.''5.

79 ASTRONOMY AND ASTROPHYSICS↗

Revealing the Phonon Bottleneck Limit in Negatively Charged CdS Quantum Dots

The capture of photoexcited hot electrons in semiconductors before they lose their excess energy to cooling is a long-standing goal in photon energy conversion. Semiconductor nanocrystals have large electron energy spacings that are expected to slow down electron relaxation by phonon emission, but hot electrons in photoexcited nanocrystals, nevertheless, cool rapidly by energy transfer to holes. This makes the intrinsic phonon-bottleneck-limited hot electron lifetime in nanocrystals elusive. For this work, we used a combination of theory and experiments to probe the hot-electron dynamics of negatively charged cadmium sulfide (CdS) colloidal quantum dots (QDs) in the absence of holes. Experiments found that these hot electrons cooled on a 100 ps time scale. Theoretical simulations predicted that pure phonon-bottleneck-limited hot electron cooling occurs on a similar time scale. This similarity suggests that the experimental measurements reflect the upper limit on the hot-electron lifetimes in these CdS QDs and the lower limit on the rates of processes that can harvest those hot electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge symmetry at the partonic level

This review article discusses the experimental and theoretical status of partonic charge symmetry. It is shown how the partonic content of various structure functions gets redefined when the assumption of charge symmetry is relaxed. Various theoretical and phenomenological models for charge-symmetry violation in parton distribution functions are reviewed. After summarizing the current experimental upper limits on charge-symmetry violation in parton distributions, a series of new experiments are proposed, which might reveal partonic charge-symmetry violation or alternatively might lower the current upper limits on parton charge-symmetry violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Far-ultraviolet extinction determined from Voyager data

Data from the Voyager UV spectrometers are used to derive FUV extinction curves for 19 stars, using the pair-comparison method after the removal of the effects of line absorption due to H I and H2. It is shown that the FUV extinction rise continues to the limit of the data at about 925 A, supporting the theoretical prediction by Longo et al. (1989) that the FUV extinction continues to rise toward short wavelengths all the way to the Lyman limit at 912 A.

Snow, Theodore P.↗

Functionalized Graphene Sheets as Molecular Templates for Controlled Nucleation and Self-Assembly of Metal Oxide-Graphene Nanocomposites

Graphene sheets have been extensively studied as a key functional component of graphene-based nanocomposites for electronics, energy, catalysis,and sensing applications. However, fundamental understanding of the interfacial binding and nucleation processes at graphene surfaces remains lacking, and the range of controlled structures that can be produced are limited. Here, by using a combination of theoretical and experimental approaches, we demonstrate that functionalized graphene sheets (FGS) can function as a new class of molecular templates to direct nucleation and self-assembly and produce novel, three-dimensional nanocomposite materials. Two key aspects are demonstrated: First, the functional groups on FGS surface determine the nucleation energy, and thus control the nucleation sites and nucleation density, as well as the preferred crystalline phases. Second, FGS can function as a template to direct the self-assembly of surfactant micelles and produce ordered, mesoporous arrays of crystalline metal oxides and composites.

Environmental Molecular Sciences Laboratory↗

Extremely Thin Perfect Absorber by Generalized Multipole Bianisotropic Effect

Symmetry breaking plays a crucial role in understanding the fundamental physics underlying numerous physical phenomena, including the electromagnetic response in resonators, giving rise to intriguing effects such as directional light scattering, supercavity lasing, and topologically protected states. Here, this work demonstrates that adding a small fraction of lossy metal (as low as 1 × 10 −6 in volume) to a lossless dielectric resonator breaks inversion symmetry (IS), thereby lifting its degeneracy, leading to a strong bianisotropic response. In the case of the metasurface composed of such resonators, this effect leads to unidirectional perfect absorption while maintaining nearly perfect reflection from the opposite direction. It has developed more general Onsager‐Casimir relations for the polarizabilities of particle arrays, taking into account the contributions of quadrupoles, which shows that bianisotropy is not solely due to dipoles, but also involves high‐order multipoles. The experimental validation demonstrates an extremely thin terahertz‐perfect absorber with a wavelength‐to‐thickness ratio of up to 25,000, where the material thickness is only 2% of the theoretical minimum thickness dictated by the fundamental limit. The findings can pave a new route to design devices for applications involving optical‐to‐heat conversion processes.

36 MATERIALS SCIENCE↗

Ultimate compressive strength and severe plastic deformation of equilibrated single-crystalline copper nanoparticles

Mechanical properties and deformation mechanisms of defect-free copper nanoparticles are investigated by combining experiments with atomistic simulations. The compressive strength of the particles increases with decreasing size and tends to saturate near the theoretical strength in the small-size limit. In this limit, the intrinsic size dependence of the strength is governed by the stochastic nature of dislocation nucleation near the particle surface. The particle deformation process evolves from the initial strain softening to strain hardening as the particle accumulates residual damage. The normalized strength-size relation for Cu is compared with those for Au, Ni, and Pt. The lack of universal behavior among the four FCC metals is discussed. Heavily deformed Cu nanoparticles develop polycrystalline structures and change the lattice orientation from [111] to [110]. The experiments and simulations reveal the twinning mechanism of the lattice rotation leading to the new grain formation.

36 MATERIALS SCIENCE↗

Mechanistic Study of the Li–Air Battery with a Co 3 O 4 Cathode and Dimethyl Sulfoxide Electrolyte

The lithium–air battery, a powerful competitor to replace the traditional lithium-ion battery, has attracted increasing attention due to its extremely high theoretical energy density. However, its development is limited by the cathode and electrolyte properties, which should include high stability, conductivity, and electrocatalytic properties in oxygen-rich environments. Here, we employ a systematic first-principles study of Li–O 2 discharge and charge reactions on the Co 3 O 4 -based cathode with the assistance of dimethyl sulfoxide (DMSO) electrolyte. The structure, stability, and electronic properties of different surface reconstructions of the Co 3 O 4 (100) facet are investigated. In addition, the mechanisms and thermodynamic overpotentials of multi-step reactions between Li + /e – and O 2 are provided, where lithium suboxide products (Li 2 O 2 or Li 3 O 2 ) are formed on the different Co 3 O 4 (100) terminations. The solvation shell of Li + components in explicit DMSO solvent is investigated through ab initio molecular dynamics simulations. In general, we find that the Co 3 O 4 (100)-O (oxidized) surface is the most stable one under standard conditions, and the stable Li + solvation structure is found in a tetrahedral Li(DMSO) 4 + shell in the DMSO-based electrolyte. Moreover, in the system of the Co 3 O 4 (100)-O cathode and DMSO electrolyte, the solution model pathway is energetically favorable for the Li–O 2 discharge reaction. It provides a low constant overpotential of 0.17 V during a long-term discharging process, thus causing the final toroid Li 2 O 2 formation on the cathode. During the charging process, an overpotential of 0.36 V is required to rapidly decompose Li 2 O 2 .

25 ENERGY STORAGE↗

Fluorine-Substituted Lithium Chloride Solid Electrolytes for High-Voltage All-Solid-State Lithium-Ion Batteries

Lithium ternary halides are promising solid electrolytes, owing to their high ionic conductivity and reasonably high oxidative and chemical stability. Recently, fluorine substitution in Li 3 MCl 6 has been suggested as a promising approach for further enhancing oxidation stability. Accordingly, this study outlines a material design strategy for F-substituted Li 3 MCl 6 through systematic theoretical analyses. Calculations reveal that the mixing limit of F in Li 3 MCl 6–x F x is in the range of 0.5–1.5, and the resulting Li 3 MCl 6–x F x phases can retain ionic conductivity above 1 mS/cm up to x = 1.0. Additionally, the calculations also predict that the formation of F-containing passivating phases could increase the oxidation potential for Li3MCl5F to ~6.3 V. The proposed material design strategy is validated through the synthesis of Li 3 YCl 5 F, which is confirmed to show both high ionic conductivity and enhanced oxidation stability. The design guidelines presented herein can accelerate the potential use of halide-based electrolyte chemistries in high-voltage all-solid-state batteries.

25 ENERGY STORAGE↗

Reward-Based Participant Management for Crowdsourcing Rainfall Monitoring: An Agent-Based Model Simulation

Crowdsourcing incorporates common citizens as rich sources of data and is promising for environmental monitoring. Here, we propose and test the idea of incorporating incentives to crowdsourcing management for rainfall monitoring. In particular, we model the allocation of incentives (quantitatively measurable and limited rewards) among crowdsourcing participants for a theoretical rainfall monitoring case. For this purpose, we develop an integrated model comprising a reward allocation component to represent the decision-making process of a central manager, an agent-based model to simulate the interactions between the manager and participants, and a rainfall simulation model to evaluate the effectiveness of various reward allocation policies. We simulate six reward allocation policies of varying levels of administrative cost, and consideration of participant and rainfall spatial heterogeneities. The findings indicate the performance of each policy to improve with the reward budget and their spatial uniformity. Among the six policies tested, we discover that the participant density weighted maximum participation policy yields the most accurate estimation of rainfall intensity due to its more explicit consideration of the spatial distribution of participants; however, this policy associates with a high administrative cost. This highlights the trade-off between performance and cost in designing effective reward allocation policies. This paper provides a physical and behavior simulation modeling tool to study the feasibility and complexity of reward-based participant management for crowdsourcing rainfall monitoring. The proposed crowdsourcing method is beneficial for a wide range of applications that require rainfall data with fine resolution, such as storm water management and water availability and biomass assessment for food and energy crops.

54 ENVIRONMENTAL SCIENCES↗

A Mass Conservation Relaxed (MCR) LSTM Model for Streamflow Simulation Across CONUS

The recent development of the physics-aware Mass-Conserving Long Short-Term Memory network (MC-LSTM) provides an alternative to other data-driven Deep Learning (DL) models in hydrology. Mass-Conserving Long Short-Term Memory incorporates mass conservation directly into the LSTM architecture. Despite the theoretical advancements, studies have reported a surprisingly limited performance of the MC-LSTM in streamflow simulation. We hypothesize that such a limitation is due to the unrealistic mass conservation scheme in MC-LSTM, which overlooks unobserved incoming water fluxes beyond precipitation. As an attempt to verify this hypothesis, we propose a Mass Conservation Relaxed LSTM (MCR-LSTM), which incorporates a bi-directional mass relaxation (MR) component to account for potential incoming water fluxes beyond precipitation. We train and test the proposed MCR-LSTM model across 531 watersheds in the contiguous United States (CONUS) against three baseline models: the Sacramento Soil Moisture Accounting, LSTM, and MC-LSTM. Our results show that MCR-LSTM outperforms MC-LSTM despite its underperformance compared to LSTM. Specifically, MCR-LSTM's advantage over MC-LSTM is mainly seen in the Plains and Western U.S., where the newly incorporated MR component better simulates water loss and suggests the likely existence of additional incoming water fluxes beyond precipitation, respectively. The novelty and contribution of this study are twofold: firstly, it introduces an alternative physics-aware DL tool (i.e., MCR-LSTM) in hydrology with higher accuracy in specific regions compared to MC-LSTM. Secondly, it provides a diagnosis of regions where strict, precipitation-based mass conservation constraints may be unrealistic in streamflow simulation.

deep learning↗

Data-driven discovery of dynamics from time-resolved coherent scattering

Coherent X-ray scattering (CXS) techniques are capable of interrogating dynamics of nano- to mesoscale materials systems at time scales spanning several orders of magnitude. However, obtaining accurate theoretical descriptions of complex dynamics is often limited by one or more factors—the ability to visualize dynamics in real space, computational cost of high-fidelity simulations, and effectiveness of approximate or phenomenological models. In this work, we develop a data-driven framework to uncover mechanistic models of dynamics directly from time-resolved CXS measurements without solving the phase reconstruction problem for the entire time series of diffraction patterns. Our approach uses neural differential equations to parameterize unknown real-space dynamics and implements a computational scattering forward model to relate real-space predictions to reciprocal-space observations. This method is shown to recover the dynamics of several computational model systems under various simulated conditions of measurement resolution and noise. Moreover, the trained model enables estimation of long-term dynamics well beyond the maximum observation time, which can be used to inform and refine experimental parameters in practice. Finally, we demonstrate an experimental proof-of-concept by applying our framework to recover the probe trajectory from a ptychographic scan. Our proposed framework bridges the wide existing gap between approximate models and complex data.

36 MATERIALS SCIENCE↗

Predicting nucleon-nucleus scattering observables using nuclear structure theory

Developing a predictive capability for inelastic scattering will find applications in multiple areas. Experimental data for neutron-nucleus inelastic scattering is limited and thus one needs a robust theoretical framework to complement it. Charged-particle inelastic scattering can be used as a surrogate for ( n, γ ) reactions to predict capture cross sections for unstable nuclei. Our work uses microscopic nuclear structure calculations for spherical nuclei to obtain nucleon-nucleus scattering potentials and calculate cross sections for these processes. We implement the Jeukenne, Lejeune, Mahaux (JLM) semi-microscopic folding approach, where the medium effects on nuclear interaction are parameterized in nuclear matter to obtain the nucleon-nucleon ( NN ) interaction in a medium at positive energies. We solve for the nuclear ground state using the Hartree-Fock-Bogliubov (HFB) many-body method, assuming the nucleons within the nucleus interact via the Gogny-D1M potential. The vibrational excited states of the target nucleus are calculated using the quasi-particle random phase approximation (QRPA). We demonstrate our approach for spherical nuclei in the medium-mass region, showing scattering results for the 90 Zr nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence for a resonant cyclotron interaction between runaway electrons and MHD modes in the experimental advanced superconducting tokamak

In the past, the resonant cyclotron interaction between runaway electrons and lower hybrid waves via anomalous Doppler broadening was experimentally investigated, and it was shown to be able to create a barrier to the energy that could be reached by the runaway electrons [E. Li et al., Nucl. Instrum. Methods Phys. Res. A 621, 566 (2010)]. In this paper, to our knowledge for the first time, experimental evidence will be provided for a resonant cyclotron interaction between runaway electrons and magnetohydrodynamics modes in a stochastic magnetic field in the experimental advanced superconducting tokamak (EAST), which has been theoretically proposed as a mechanism able to limit the maximum attainable energy by runaway electrons in tokamak plasmas [J. R. Martin-Solis and R. Sanchez, Phys. Plasmas 15, 112505 (2008)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy resolved X-ray grating interferometry

Although compatible with polychromatic radiation, the sensitivity in X-ray phase contrast imaging with a grating interferometer is strongly dependent on the X-ray spectrum. We used an energy resolving detector to quantitatively investigate the dependency of the noise from the spectral bandwidth and to consequently optimize the system-by selecting the best energy band matching the experimental conditions-with respect to sensitivity maximization and, eventually, dose. Further, since theoretical calculations of the spectrum are usually limited due to non-ideal conditions, an energy resolving detector accurately quantifies the spectral changes induced by the interferometer including flux reduction and beam hardening.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation from charges in the continuum limit

It is known that an accelerating charge radiates according to Larmor formula. On the other hand, any DC current following a curvilinear path, consists of accelerating charges, but in such case the radiated power is 0. The scope of this paper is to analyze and quantify how a system of charges goes from a radiating state to a non radiating state when the charges distribution goes to the continuum limit. Understanding this is important from the theoretical point of view and the results of this work are applicable to particle accelerator, cyclotron and other high energy devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preferential site occupancy of alloying elements in TiAl-based phases

First principles calculations are used to study the preferential occupation of ternary alloying additions into the binary Ti-Al phases, namely, γ-TiAl, α{sub 2}-Ti{sub 3}Al, β{sub o}-TiAl, and B19-TiAl. While the early transition metals (TMs, group IVB, VB, and VIB elements) prefer to substitute for Ti atoms in the γ-, α{sub 2}-, and B19-phases, they preferentially occupy Al sites in the β{sub o}-TiAl. Si is, in this context, an anomaly, as it prefers to sit on the Al sublattice for all four phases. B and C are shown to prefer octahedral Ti-rich interstitial positions instead of substitutional incorporation. The site preference energy is linked with the alloying-induced changes of energy of formation, hence alloying-related (de)stabilisation of the phases. We further show that the phase-stabilisation effect of early TMs on β{sub o}-phase has a different origin depending on their valency. Finally, an extensive comparison of our predictions with available theoretical and experimental data (which is, however, limited mostly to the γ-phase) shows a consistent picture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗