Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface complexation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A domain-specific design architecture for composite material design and aircraft part redesign

Advanced composites have been targeted as a 'leapfrog' technology that would provide a unique global competitive position for U.S. industry. Composites are unique in the requirements for an integrated approach to designing, manufacturing, and marketing of products developed utilizing the new materials of construction. Numerous studies extending across the entire economic spectrum of the United States from aerospace to military to durable goods have identified composites as a 'key' technology. In general there have been two approaches to composite construction: build models of a given composite materials, then determine characteristics of the material via numerical simulation and empirical testing; and experience-directed construction of fabrication plans for building composites with given properties. The first route sets a goal to capture basic understanding of a device (the composite) by use of a rigorous mathematical model; the second attempts to capture the expertise about the process of fabricating a composite (to date) at a surface level typically expressed in a rule based system. From an AI perspective, these two research lines are attacking distinctly different problems, and both tracks have current limitations. The mathematical modeling approach has yielded a wealth of data but a large number of simplifying assumptions are needed to make numerical simulation tractable. Likewise, although surface level expertise about how to build a particular composite may yield important results, recent trends in the KBS area are towards augmenting surface level problem solving with deeper level knowledge. Many of the relative advantages of composites, e.g., the strength:weight ratio, is most prominent when the entire component is designed as a unitary piece. The bottleneck in undertaking such unitary design lies in the difficulty of the re-design task. Designing the fabrication protocols for a complex-shaped, thick section composite are currently very difficult. It is in fact this difficulty that our research will address.

Punch, W. F., III↗

The Development of a Tool for Semi-Automated Generation of Structured and Unstructured Grids about Isolated Rotorcraft Blades

The grid generation used to model rotorcraft configurations for Computational Fluid Dynamics (CFD) analysis is highly complicated and time consuming. The highly complex geometry and irregular shapes encountered in entire rotorcraft configurations are typically modeled using overset grids. Another promising approach is to utilize unstructured grid methods. With either approach the majority of time is spent manually setting up the topology. For less complicated geometries such as isolated rotor blades, less time is obviously required. This paper discusses the capabilities of a tool called Rotor blade Optimized Topology Organizer and Renderer(ROTOR) being developed to quickly generate block structured grids and unstructured tetrahedral grids about isolated blades. The key algorithm uses individual airfoil sections to construct a Non-Uniform Rational B-Spline(NURBS) surface representation of the rotor blade. This continuous surface definition can be queried to define the block topology used in constructing a structured mesh around the rotor blade. Alternatively, the surface definition can be used to define the surface patches and grid cell spacing requirements for generating unstructured surface and volume grids. Presently, the primary output for ROTOR is block structured grids using 0-H and H-H topologies suitable for full-potential solvers. This paper will discuss the present capabilities of the tool and highlight future work.

Shanmugasundaram, Ramakrishnan↗

Workshop on New Views of the Moon: Integrated Remotely Sensed, Geophysical, and Sample Datasets

It has been more than 25 years since Apollo 17 returned the last of the Apollo lunar samples. Since then, a vast amount of data has been obtained from the study of rocks and soils from the Apollo and Luna sample collections and, more recently, on a set of about a dozen lunar meteorites collected on Earth. Based on direct studies of the samples, many constraints have been established for the age, early differentiation, crust and mantle structure, and subsequent impact modification of the Moon. In addition, geophysical experiments at the surface, as well as remote sensing from orbit and Earth-based telescopic studies, have provided additional datasets about the Moon that constrain the nature of its surface and internal structure. Some might be tempted to say that we know all there is to know about the Moon and that it is time to move on from this simple satellite to more complex objects. However, the ongoing Lunar Prospector mission and the highly successful Clementine mission have provided important clues to the real geological complexity of the Moon, and have shown us that we still do not yet adequately understand the geologic history of Earth's companion. These missions, like Galileo during its lunar flyby, are providing global information viewed through new kinds of windows, and providing a fresh context for models of lunar origin, evolution, and resources, and perhaps even some grist for new questions and new hypotheses. The probable detection and characterization of water ice at the poles, the extreme concentration of Th and other radioactive elements in the Procellarum-Imbrium-Frigon's resurfaced areas of the nearside of the Moon, and the high-resolution gravity modeling enabled by these missions are examples of the kinds of exciting new results that must be integrated with the extant body of knowledge based on sample studies, in situ experiments, and remote-sensing missions to bring about the best possible understanding of the Moon and its history.

Jolliff, Brad L.↗

First Detection of Methanol in a Class O Protostellar Disk

We report the detection of emission from methanol in a compact source coincident with the position of the L1157 infrared source, which we attribute to molecules in the disk surrounding this young, Class O protostellar object. In addition, we identify a spectral feature in the outflow corresponding to an ethanol transition. Using the Caltech Owens Valley Millimeter Array with a synthesized beam size of 2", we detect spatially unresolved methanol in the 2(sub k) - 1(sub k) transitions at 3mm, which is coincident in position with the peak of the continuum emission. The gas phase methanol could be located in the central region (< 100 AU radius) of a flat disk, or in an extended heated surface layer (approx. 200 AU radius) of a flared disk. The fractional abundance of methanol X(CH3OH) is approx. 2 x l0(exp -8) in the flat disk model, and 3 x l0(exp -7) for the flared disk. The fractional abundance is small in the disk as a whole, but considerably larger in the warm portions. This difference indicates that substantial chemical processing probably takes place in the disk via depletion and desorption. The methanol desorbed from the grains in the warm surface layers returns to the icy grain mantles in the cooler interior of the disk, where it is available to become part of the composition of solar system-like bodies, such as comets, formed in the outer circumstellar region. This first millimeter-wavelength detection of a complex organic molecule in a young protostellar disk has implications for disk structure and chemical evolution and for potential use as a temperature probe. The research of TV and WL was conducted at the Jet Propulsion Laboratory, California Institute of Technology with support from the National Aeronautics and Space Administration.

Velusamy, T.↗

Transient Analysis of Thermal Protection System for X-33 Aircraft using MSC/NASTRAN

X-33 is an advanced technology demonstrator vehicle for the Reusable Launch Vehicle (RLV) program. The thermal protection system (TPS) for the X-33 is composed of complex layers of materials to protect internal components, while withstanding severe external temperatures induced by aerodynamic heating during high speed flight. It also serves as the vehicle aeroshell in some regions using a stand-off design. MSC/NASTRAN thermal analysis capability was used to predict transient temperature distribution (within the TPS) throughout a mission, from launch through the cool-off period after landing. In this paper, a typical analysis model, representing a point on the vehicle where the liquid oxygen tank is closest to the outer mold line, is described. The maximum temperature difference between the outer mold line and the internal surface of the liquid oxygen tank can exceed 1500 F. One dimensional thermal models are used to select the materials and determine the thickness of each layer for minimum weight while insuring that all materials remain within the allowable temperature range. The purpose of working with three dimensional (3D) comprehensive models using MSC/NASTRAN is to assess the 3D radiation effects and the thermal conduction heat shorts of the support fixtures.

Miura, Hirokazu↗

The Search for New Molecular Species in the Atmosphere of Titan

The atmosphere of Saturn’s moon, Titan, contains a vast array of minor molecular constituents originating from the dissociation of its primary compounds, N2and CH4. The extent of Titan’s photochemical network was revealed by ionospheric measurements from the Cassini orbiter, leaving substantial gaps in the corresponding neutral inventory typically probed through infrared spectroscopy. Utilizing the unprecedented sensitivity and high spectral resolution of the Atacama Large Millimeter/submillimeter Array (ALMA) at longer wavelengths, we searched for additional trace gases in Titan’s atmosphere during 2016, 2017,and 2019to further characterize Titan’s atmospheric and surface composition. These observations have resulted in the spectroscopic detections of the small cyclic molecule, cyclopropenylidene (c-C3H2), and the largest nitrile to date, methyl cyanoacetylene (CH3C3N), for the first time in Titan’s atmosphere –or anywhere else in the Solar System. We employed radiative transfer models to determine the volume mixing ratio of both species in Titan’s middle and upper atmosphere (altitudes > 350 km)and constrained the total column densities for the incorporation into future photochemical models of Titan’s atmosphere. Discrepancies between these results and current models necessitates the need for dedicated laboratory and modeling studies regarding the production pathways for trace complex organics in Titan’s atmosphere. Additionally, the measurement of previously undetected molecular species provides further incentive for the study of planetary atmospheres in the (sub)millimeter regime with facilities such as ALMA.

A E Thelen↗

Microbial Pigments and Their Degradation Products as Biosignatures

Carotenoids are a class of vibrant biological pigments that have a characteristic chemical structure centered around a polyene core (Lu et al. 2018). Carotenoids and their derivatives are candidate biosignatures because they can persist in the terrestrial geologic record for up to 1.73 billion years (Vinnichenko et al. 2020), have specific structures that are likely the result of complex pathways, mediate the survival of many microorganisms in Mars and Ocean Worlds analog environments, and are detectable with multiple techniques, including Raman spectroscopy. In this project, we aim to investigate the detectability of carotenoid pigments with different spectroscopic methods to inform future instrument selection. We compare the spectra of five unaltered carotenoids, two model compounds, and carotenoid-forming archaeon with visible and deep UV Raman spectroscopy and UVVis absorption spectrophotometry. We then use one model pigment, beta-carotene, to evaluate the likelihood that unique spectral properties of carotenoids, or their refractory byproducts, would be preserved and detectable on a remote planetary surface by exposing it to simulated conditions for Mars. Sample Acquisition. Pigments betacarotene, lutein, zeaxanthin, astaxanthin, and lycopene were purchased from Sigma Aldrich. Halobacterium salinarum NRC-1 was acquired from Carlina Biological and grown in Halobacterium media. Mineral salts including sodium sulfate, sodium carbonate, and halite were used to form matrices in which the beta-carotene was embedded before exposure. Pigment-mineral mixes were at a 1:10 ratio in water. Analytical Techniques. Deep UV Raman data were collected on a custom laboratory mapping spectrometer called MOBIUS (Mineral and Organic Based Investigations using Ultraviolet Spectroscopy), which is an analog to the SHERLOC instrument on the Mars 2020 Perseverance rover (Bhartia et al. 2021). It features a 248.56 nm NeCu pulsed laser, liquid nitrogen-cooled detector, and tunable optical setup. Visible Raman data were collected using a Horiba Jobin Yvon LabRam HR spectrometer with a frequencydoubled Nd:YAG laser (532 nm) and a HeNe laser (633 nm). A VWR 6300 PC UV/Visible Spectrophotometer was used to collect absorption data for carotenoid solutions, model compounds, and solvents in UVpermissible capped cuvettes. Data were collected from 190-1100 nm at 1 nm increments. All spectral data were analyzed using Igor Pro 9 (Wavemetrics). Irradiation. We used a vacuum chamber equipped with a cryostat and a flood electron gun to simulate Martian surface temperatures, low pressures, and ionizing radiation (10keV, 10μA for 6h at 200K for our initial tests). The samples were prepared by drying the pigment-mineral mix onto polished metal tabs, then mounted on the cryostat for processing. Samples were then analyzed directly on the tabs after exposure. Results: In comparing the visible and deep UV Raman spectra of unaltered pigments, we found that they differed drastically. Carotenoids are often studied with visible Raman and typically have peaks at 1525 cm-1 and 1157 cm-1, due to the stretching of the C=C and C-C bonds in the polyene structure. However, in deep UV, the strongest feature is at ~1630 cm-1 and is broad, possibly indicating that multiple peaks are forming this feature. This stark difference is likely due to different preresonant enhancement effects. The UV-Vis results show that there is an absorption band in the deep UV <300 nm, which supports the hypothesis that the 248.6 nm excitation is interrogating another aspect of carotenoids than visible Raman. Our preliminary exposure tests indicated that pigments – even without minerals present - were largely unaltered in the applied conditions, with only a slight broadening in the primary polyene peaks apparent in the visible Raman data. Figure 1. A) Visible vs. deep UV Raman spectra of unaltered beta carotene. B) Schematic of exposure. Conclusions: Our results to date indicate that deep UV and visible Raman spectroscopy, both techniques with planetary mission heritage from Mars 2020 (Wiens et al. 2021, Bhartia et al. 2021), may be used in a complementary manner to observe carotenoids. In addition, we find that beta-carotene is largely resistant to our current exposure conditions, though there may be some amount of amorphization of the material which could cause the broadening of the peaks at 1525 and 1157 cm-1. As a next step, we aim to increase the dosage and duration of exposure to observe degradation of the parent pigment, possibly add UV as a factor via an Ar mini-arc UV lamp and use GC-MS to characterize possible degradation products.

pigments↗

Simple equation to approximate the bidirectional reflectance from vegetative canopies and bare soil surfaces

A simple equation has been developed for describing the bidirectional reflectance of some vegetative canopies and bare soil surfaces. The equation describes directional reflectance as a function of zenith and azimuth view angles and solar azimuth angle. The equation works for simulated and field measured red and IR reflectance under clear sky conditions. Hemispherical reflectance can be calculated as a function of the simple equation coefficients by integrating the equation over the hemisphere of view angles. A single equation for estimating soil bidirectional reflectance was obtained using the relationships between solar zenith angles and the simple equation coefficients for medium and rough soil distributions. The equation has many useful applications such as providing a lower level boundary condition in complex plant canopy models and providing an additional tool for studying bidirectional effects on pointable sensors.

Walthall, C. L.↗

Unsteady heat transfer in turbine blade ducts: Focus on combustor sources

Thermal waves generated by either turbine rotor blades cutting through nonuniform combustor temperature fields or unsteady burning could lead to thermal fatigue cracking in the blades. To determine the magnitude of the thermal oscillation in blades with complex shapes and material compositions, a finite element Galerkin formulation has been developed to study combustor generated thermal wave propagation in a model two-dimensional duct with a uniform plug flow profile. The reflection and transmission of the thermal waves at the entrance and exit boundaries are determined by coupling the finite element solutions at the entrance and exit to the eigenfunctions of an infinitely long adiabatic duct. Example solutions are presented. In general, thermal wave propagation from an air passage into a metallic blade wall is small and not a problem. However, if a thermal barrier coating is applied to a metallic surface under conditions of a high heat transfer, a good impedance match is obtained and a significant portion of the thermal wave can pass into the blade material.

Baumeister, Kenneth J.↗

Unsteady heat transfer in turbine blade ducts - Focus on combustor sources

Thermal waves generated by either turbine rotor blades cutting through nonuniform combustor temperature fields or unsteady burning could lead to thermal fatigue cracking in the blades. To determine the magnitude of the thermal oscillation in blades with complex shapes and material compositions, a finite element Galerkin formulation has been developed to study combustor generated thermal wave propagation in a model two-dimensional duct with a uniform plug flow profile. The reflection and transmission of the thermal waves at the entrance and exit boundaries are determined by coupling the finite element solutions at the entrance and exit to the eigenfunctions of an infinitely long adiabatic duct. Example solutions are presented. In general, thermal wave propagation from an air passage into a metallic blade wall is small and not a problem. However, if a thermal barrier coating is applied to a metallic surface under conditions of a high heat transfer, a good impedance match is obtained and a significant portion of the thermal wave can pass into the blade material.

Baumeister, K. J.↗

Compressibility and Turbulence Effects Due to Airfoil Clocking in Axial Compressors

Axial compressors have inherently unsteady flow fields because of relative motion between rotor and stator airfoils. This relative motion leads to viscous and inviscid (potential) interactions between blade rows. As the number of stages increases in a turbomachine, the buildup of convected wakes can lead to progressively more complex wake/wake and wake/airfoil interactions. Variations in the relative circumferential positions of stators or rotors can change these interactions, leading to different unsteady forcing functions on airfoils and different compressor efficiencies. In addition, as the Mach number increases the interaction between blade rows is intensified due to potential effects. The current study uses an unsteady, two-dimensional Navier-Stokes approach to investigate the unsteady aerodynamics of stator clocking in a 1-1/2 stage compressor, typical of high-pressure compressors used in advanced commercial jet engines. The effects of turbulence are modeled with both algebraic and two-equation models. Results include surface pressures, efficiencies, boundary layer quantities and turbulence quantities. In addition, the growth of turbulence and the effects of compressibility on airfoil are discussed.

Dorney, Daniel J.↗

Stellar Activity Effects on Moist Habitable Terrestrial Atmospheres Around M Dwarfs

Transit spectroscopy of terrestrial planets around nearby M dwarfs will be a primary goal of space missions in coming decades. Three-dimensional climate modeling has shown that slow-synchronous rotating terrestrial planets may develop thick clouds at the substellar point, increasing the albedo. For M dwarfs with T(eff)>3000 K, such planets at the inner habitable zone (IHZ) have been shown to retain moist greenhouse conditions, with enhanced stratospheric water vapor ( fH2O>10(exp −3)) and low Earth-like surface temperatures. However, M dwarfs also possess strong UV activity, which may effectively photolyze stratospheric H2O. Prior modeling efforts have not included the impact of high stellar UV activity on the H2O. Here, we employ a 1D photochemical model with varied stellar UV, to assess whether H2O destruction driven by high stellar UV would affect its detectability in transmission spectroscopy. Temperature and water vapor profiles are taken from published 3D climate model simulations for an IHZ Earth-sized planet around a 3300 K M dwarf with an N2–H2O atmosphere; they serve as self-consistent input profiles for the 1D model. We explore additional chemical complexity within the 1D model by introducing other species into the atmosphere. We find that as long as the atmosphere is well-mixed up to 1 mbar, UV activity appears to not impact detectability of H2O in the transmission spectrum. The strongest H2O features occur in the James Webb Space Telescope MIRI instrument wavelength range and are comparable to the estimated systematic noise floor of ∼50 ppm.

Badhan, Mahmuda Afrin↗

Regenerative ECLSS and Logistics Analysis for Sustained Lunar Surface Missions

As NASA begins to develop concepts for sustained crew missions to the lunar surface, it will be essential to evaluate the logistics requirements needed to enable such missions. Lunar surface missions will involve crews of four astronauts living on the surface for periods of 30 days or longer. Astronauts will either live in a surface habitat or transfer between a habitat and a pressurized rover. The amount of logistics that must be delivered to the surface to support the crew, support the surface systems, and conduct science could be substantial. Because NASA plans to conduct these missions on an annual basis, the complexity and cost of logistics delivery will likely drive campaign sustainability. The amount of required logistics is partially a function of the ECLSS system in the habitable elements on the surface. The higher the capability of regenerative ECLSS that can be accommodated, the lower the logistics requirements. However, the increased regenerative ECLSS capabilities will also increase the initial delivery mass of elements and require additional maintenance and spares to maintain the systems. This paper describes an effort to evaluate lunar sustained logistics requirements, including sensitivity analysis for ECLSS architecture options and their impact on requirements. The authors determine logistics requirements using an integrated surface ECLSS model. The model considers different configurations of rover and habitat setups with multiple ECLSS options on both. The tool can also model gas and liquid transfer options between the habitat and the rover. The authors use the model to evaluate several different ECLSS configurations and their logistics requirements. The authors then complete a sensitivity analysis that compares logistic requirements and the initial delivery mass over increasing ECLSS capabilities. Finally, the authors make recommendations for an ECLSS architecture option that balances the tradeoffs between logistics requirements and ECLSS mass.

Environmental Control and Life Support↗

Towards Improved Forecasts of Atmospheric and Oceanic Circulations over the Complex Terrain of the Eastern Mediterranean

Forecasting atmospheric and oceanic circulations accurately over the Eastern Mediterranean has proved to be an exceptional challenge. The existence of fine-scale topographic variability (land/sea coverage) and seasonal dynamics variations can create strong spatial gradients in temperature, wind and other state variables, which numerical models may have difficulty capturing. The Hellenic Center for Marine Research (HCMR) is one of the main operational centers for wave forecasting in the eastern Mediterranean. Currently, HCMR's operational numerical weather/ocean prediction model is based on the coupled Eta/Princeton Ocean Model (POM). Since 1999, HCMR has also operated the POSEIDON floating buoys as a means of state-of-the-art, real-time observations of several oceanic and surface atmospheric variables. This study attempts a first assessment at improving both atmospheric and oceanic prediction by initializing a regional Numerical Weather Prediction (NWP) model with high-resolution sea surface temperatures (SST) from remotely sensed platforms in order to capture the small-scale characteristics.

Chronis, Themis↗

Magnetospheric chorus - Occurrence patterns and normalized frequency

Over 400 hours of continuous broadband data obtained by the OGO 3 satellite are analyzed to provide a statistically accurate description of band-limited (magnetospheric) chorus. Certain aspects of the chorus frequency distribution are interpreted in terms of a gyroresonant electron feedback model of generation. An example of high chorus activity during an outbound pass through the noon magnetosphere is examined in detail, the spectral complexity of some chorus is illustrated, and the diurnal variation of chorus occurrence is investigated. The frequency and bandwidth distributions of chorus are analyzed. The results indicate that chorus occurrence depends strongly on local time and dipole latitude, the general region of maximum chorus occurrence approximates the previously reported zone of 'hard' electron precipitation, and the normalized chorus frequency is strongly dependent on dipole latitude. It is shown how a change in the curvature of the whistler-mode refractive-index surface affects focusing of radiation along magnetic field lines and how interference can occur between modes with slightly different ray velocities. It is concluded that most magnetospheric chorus consists of rising emissions which are probably generated by gyroresonant electrons slightly off the equator.

Burtis, W. J.↗

The low-latitude circulation of Mars

A steady-state two-layer atmospheric model is used in an attempt to simulate the circulation of the equatorial regions of Mars, with consideration of both thermal and mechanical orographic effects. A steady-state solution is sought with the aim of producing mean seasonal circulations upon which tides can be superimposed, and the relative importance of orographic forcing at low latitudes is evaluated. It is assumed that the atmospheres over a topographic feature and over flat terrain possess the same radiative and convective properties, simple dissipation laws are introduced which represent a surface drag effect, and six first-order difference equations are obtained and then reduced to two linear complex second-order coupled difference equations. Analysis of the response of the equinoctial basic wind field to a Gaussian orographic feature situated at the equator and zero deg longitude reveals a number of similarities and differences between the Martian and terrestrial responses. Most of the similarities are explained in terms of the dynamics of a rotating atmosphere, while the major differences are at least partially explained by the different optical properties, lower boundaries, and smaller mass of the Martian atmosphere.

Webster, P. J.↗

Characterization of microcomposite polyimide films

Thermally stable microcomposite polyimide films were prepared by the homogeneous incorporation of either a soluble metal salt or a metal complex into a poly(amide-acid)/N,N-dimethylacetamide solution. The thermal processing of films solvent cast onto glass substrates and cured in an appropriate atmosphere yields films containing not only a fairly uniform dispersion of submicrometer particles, but also a new surface layer of metal or metal oxide. These polymeric systems have been characterized using X-ray photoelectron spectroscopy, Auger electron spectroscopy with depth profiling via argon ion etching, transmission electron microscopy of ultramicrotomed cross-sections, scanning electron microscopy, elemental analysis, thermal analysis, and variable temperature electrical resistivity determinations. The data from these techniques were used cooperatively to develop a model for these microcomposite polyimide films.

Rancourt, J. D.↗

The soft gamma-ray spectrum of A0535+26: Detection of an absorption feature at 110 keV by OSSE

We present soft gamma-ray observations by the Oriented Scintillation Spectrometer Experiment (OSSE) on the Compton Gamma Ray Observatory (GRO) of the transient X-ray binary pulsar A0535+26. The observations were made 1994 February 8-17, immediately prior to the peak of a giant outburst. The phase averaged spectrum is complex and cannot be described by a single-component model. We find that structure in the spectrum above 100 keV can best be modeled by an absorption feature near 110 keV, which we interepret as the signature of cyclotron resonant scattering. Because of OSSE's 45 keV threshold, we are unable to make a definitive statement on the presence of a 55 keV absorption line; however, we can conclude that if this line does exist, it must have a smaller optical depth than the line at 110 keV. A first harmonic (=fundamental) cyclotron resonance at 110 keV corresponds to a magnetic field strength at the surface of the neutron star of approximately 1 x 10(exp 13) G (approximately 5 x 10(exp 12) G if the first harmonic is at 55 keV).

Grove, J. E.↗