Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Calculation of damage, He and H production using SPECTER

This document explains the procedure to compute gas production in fuel and structural materials using SPECTER from neutronics calculations provided by J. Latkowski using MCNP. The gas production cross sections (four channels are considered: (n, {sub 1}{sup 1,2,3}H) and (n,{sub 2}{sup 4}He)) for each isotope are taken from the cross-section library ENDF/B-V (we refer the reader to the SPECTER manual for more details). Therein, one can see flux data from, approximately, 0 (BOL) to 50 (EOL) years (cut after 7 columns for clarity). In order to compute damage and gas production with SPECTER, one needs to provide the flux group data expressed in a maximum of 100 energy groups (a SPECTER requirement). The flux data structure provided by J. Latkowski using MCNP consists of 616 groups spanning the 10{sup -9} < E < 20 MeV energy range. The first thing that needs to be done is to collapse these data into a format consisting of 100 groups suitable for SPECTER. As we can see, our (arbitrarily chosen) group structure covers the same energy range as the flux data from MCNP. A simple code (multgrp.c) has been written using the C programming language to do the collapse. This code only requires the desired output group structure as input (just shown above), and the flux data from MCNP. Note that the input flux group structure (from MCNP) can be any, as the code is not limited to the specific one of 616 groups used by Latkowski et al.

42 ENGINEERING↗

Progress and opportunities in corrosion mitigation in heat transfer fluids for next-generation concentrating solar power

Concentrating solar power (CSP) systems have gained considerable eminence in converting solar thermal energy into electrical power in recent years. According to the U.S. Department of Energy's Gen3 roadmap, the CSP system should operate > 700 °C, as its efficiency depends directly on the operating temperature of the heat transfer fluids (HTFs). A significant challenge, however, is the corrosion of containment materials by the HTFs that is exacerbated at the higher temperatures. A comprehensive review of the high temperature stable HTFs, their properties, corrosion mechanisms on different alloys, and corrosion mitigation measures is of much importance for directing a concerted research and development in the field, which forms the motivation for this compendium. First, molten salt HTFs and their thermophysical properties, along with liquid metals, are introduced. Corrosion of structural materials in different HTFs including molten salts, liquid metals, and supercritical carbon-di-oxide at various temperatures and the corrosion mechanisms are comprehensively reviewed. In addition, several corrosion mitigation methods are discussed. Finally, future directions for HTFs and corrosion mitigation methods in molten salts are proposed. As a result, the holistic review presented here will serve as the foundation for further research addressing relevant challenges and enabling the promise of achieving cost-competitive CSP.

14 SOLAR ENERGY↗

Electrochemically Smart Bimetallic Materials Featuring Group 11 Metals: In-situ Conductive Network Generation and Its Impact on Cell Capacity

Our results for this program “Electrochemically smart bimetallic materials featuring Group 11 metals: in-situ conductive matrix generation and its impact on battery capacity, power and reversibility” have been highly successful: 1) we demonstrated material structures which generated in-situ conductive networks through electrochemical activation with increases in conductivity up to 10,000 fold, 2) we pioneered in situ analytical methodology to map the cathodes at several stages of discharge through the use of Energy Dispersive X-ray Diffraction (EDXRD) to elucidate the kinetic dependence of the conductive network formation, and 3) we successfully designed synthetic methodology for direct control of material properties including crystallite size and surface area which showed significant impact on electrochemical behavior.

30 DIRECT ENERGY CONVERSION↗

Simultaneous Thermal and Gamma Radiation Aging of Electrical Cable Polymers

The polymers used for insulation in nuclear power plant electrical cables are susceptible to aging during long term operation. Elevated temperature is the primary contributor to changes in polymer structure that result loss of mechanical and electrical properties, but gamma radiation is also a significant source of degradation for polymers used within relevant plant locations. Despite many years of polymer degradation research, the combined effects of simultaneous exposure to thermal and radiation stress are not well understood. As nuclear operators contemplate and prepare for extended operations beyond initial license periods, a predictive understanding of exposure-based cable material degradation is becoming an increasingly important input to safety, licensing, operations and economic decisions. We are focusing on carefully-controlled simultaneous thermal and gamma radiation accelerating aging and characterization of the most common nuclear cable polymers to understand the relative contributions of temperature, time, dose and dose rate to changes in cable polymer material structure and properties. Improved understanding of cable performance in long term operation will help support continued sustainable nuclear power generation.

Cables, Nuclear, Polymers, Thermal aging, Gamma ag↗

Electrons matter in ferromagnetic criticality

When elemental iron is cooled from high temperatures, magnetic moments carried by its d-electrons begin a continuous transition to a state of parallel aligned moments below its Curie temperature TC of about 1040 K. As established in the mid-1900s, the statistical physics of this second order phase transition is universal, independent of the ordering temperature, material structure and chemical composition as well as the character of moment-bearing electrons. Finally, the thermodynamics of the phase transition is determined solely by symmetries of the transition’s order parameter – magnetization in the case of a ferromagnet.

36 MATERIALS SCIENCE↗

Terahertz field–induced ferroelectricity in quantum paraelectric SrTiO 3

“Hidden phases” are metastable collective states of matter that are typically not accessible on equilibrium phase diagrams. These phases can host exotic properties in otherwise conventional materials and hence may enable novel functionality and applications, but their discovery and access are still in early stages. Using intense terahertz electric field excitation, we found that an ultrafast phase transition into a hidden ferroelectric phase can be dynamically induced in quantum paraelectric strontium titanate (SrTiO 3 ). The induced lowering in crystal symmetry yields substantial changes in the phonon excitation spectra. Our results demonstrate collective coherent control over material structure, in which a single-cycle field drives ions along the microscopic pathway leading directly to their locations in a new crystalline phase on an ultrafast time scale.

36 MATERIALS SCIENCE↗

Advanced Characterization of Irradiated Fuels and Materials at INL

Advanced characterization of the irradiated fuels and materials is crucial to help understanding the material and fuel property changes under irradiation. Microstructural defect evolution down to nanometer scale could strongly affect the material and fuel performance on macroscale. Radiation-induced material degradation include dimensional instability, hardening and embrittlement, intergranular cracking, radiation-enhanced chemical interaction at the interfaces and breakaway swelling. To mitigate the radiation damage, advanced characterization on irradiated microstructure, microchemistry, micromechanical property and local thermal property is necessary to identify the controlling mechanisms that are responsible to the degradations. This presentation provides a summary of the advanced characterization capabilities at the Irradiation Materials Characterization Laboratory (IMCL), Materials and Fuels Complex (MFC), Idaho National Laboratory (INL). It highlights the recently established capabilities including shield sample preparation area (SSPA), shield confinement cells for two focused ion beam (FIB) systems, a shielded electron probe microanalysis (EPMA), the thermal property microscopy (TPM) along with non-shielded instruments like scanning electron microscopy (SEM), X-ray diffractometer, and transmission electron microscopy (TEM). Some examples on advanced characterizations on irradiated structural materials and fuels will be presented. It demonstrates the power of combining sample preparation of highly radioactive materials with the advanced characterization down to atomic resolutions within one facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Alloy 709 Advanced Austenitic Stainless Steel

Provide material solutions to enabling design, construction, licensing and operation of advanced reactors Including Fast Reactors, Gas-cooled Reactors and Molten Salt Reactors (solid or liquid fuel) Could be of modular or micro designs, and from hundreds of MWe to kWe Provide technical bases needed for design and licensing of advanced reactor components Develop & validate improved high temperature design methodology Provide qualification data (to NQA-1 or equivalent) on structural materials Utilize consensus standards when appropriate (e.g., ASME, ASTM, etc.) Target resolution of issues needed for near to mid-term deployment of advanced reactors

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The formation of the complex manganites LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd)

Graphical abstract: Display Omitted Highlights: ► Formation of the LnSr{sub 2}Mn{sub 2}O{sub 7} phases proceeds according to two different pathways. ► Cationic composition of the obtained phase depends on the formation pathway. ► Step-by-step synthesis allows obtaining single-phase material. ► Structure and magnetic properties of the single-phase NdSr{sub 2}Mn{sub 2}O{sub 7} were investigated. -- Abstract: The process of formation of the Ruddlesden–Popper phases LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd) was investigated by means of X-ray diffraction, thermal analysis and microprobe analysis. Two parallel pathways were found for the reaction. The first one includes the formation of the intermediate K{sub 2}NiF{sub 4}-type compound by interaction of Sr{sub 7}Mn{sub 4}O{sub 15} and perovskite-type solid solution (Ln,Sr)MnO{sub 3}, while in the second one the K{sub 2}NiF{sub 4}-type intermediate is formed during the reaction of the same perovskite-type solid solution with the corresponding rare earth oxide. This result gives an explanation for the formation of two phases with slightly different cationic compositions. The kinetics of the reaction was investigated for both mechanisms resulting in determination of their relative contribution to the final composition. Pure NdSr{sub 2}Mn{sub 2}O{sub 7} was obtained using a step-by-step process according to the first mechanism, and the magnetic properties of this phase were investigated.

36 MATERIALS SCIENCE↗

Graphene-on-semiconductor substrates for analog electronics

Electrically conductive material structures, analog electronic devices incorporating the structures and methods for making the structures are provided. The structures include a layer of graphene on a semiconductor substrate. The graphene layer and the substrate are separated by an interfacial region that promotes transfer of charge carriers from the surface of the substrate to the graphene.

36 MATERIALS SCIENCE↗

A low-cost hierarchical nanostructured beta-titanium alloy with high strength

Lightweighting of automobiles by use of novel low-cost, high strength-to-weight ratio structural materials can reduce the consumption of fossil fuels and in turn CO 2 emission. Working towards this goal we achieved high strength in a low cost β-titanium alloy, Ti-1Al-8V-5Fe (Ti185), by hierarchical nanostructure consisting of homogenous distribution of micron-scale and nanoscale α-phase precipitates within the β-phase matrix. The sequence of phase transformation leading to this hierarchical nanostructure is explored using electron microscopy and atom probe tomography. Our results suggest that the high number density of nanoscale α-phase precipitates in the β-phase matrix is due to ω assisted nucleation of α resulting in high tensile strength, greater than any current commercial titanium alloy. Furthermore hierarchical nanostructured Ti185 serves as an excellent candidate for replacing costlier titanium alloys and other structural alloys for cost-effective lightweighting applications.

36 MATERIALS SCIENCE↗

Influence of solidification structures on radiation-induced swelling in an additively-manufactured austenitic stainless steel

Metal additive manufacturing offers potential advantages for producing structural materials, such as austenitic stainless steels, in nuclear power systems. However, the microstructure developed during metal additive processing is notably different from the one developed in conventional processing, and the influence of the microstructural differences on performance in radiation environments has not been fully quantified. Using heavy ion irradiation and transmission electron microscopy, the radiation-induced swelling response of a laser powder-bed fusion-manufactured austenitic stainless steel was investigated at high doses. The influence of solidification-induced dislocation and precipitate structures was studied by comparing the radiation-induced swelling response of a 316L stainless steel in three microstructural states: as-fabricated, solution annealed, and fully recrystallized. Void swelling was approximately twice as pronounced in the as-fabricated state compared to post-processed states. In the framework of the rate theory for radiation effects, the higher swelling in the as-fabricated state can be explained by the strong sink bias for interstitial point defects exerted by the intermediate density of pre-existing dislocations. Void swelling was inhibited in the vicinity of pre-existing precipitates, but the density of precipitates in the as-fabricated material was not enough to compensate for the increase in swelling caused by dislocations.

36 MATERIALS SCIENCE↗

Intrinsic and extrinsic effects on the fracture toughness of ductile metallic glasses

The potential application of metallic glasses (MGs) as structural materials demands accurate measurements of their toughness and the understanding of the underlying factors affecting it. Currently, it is challenging to precisely measure the toughness of MGs, especially ductile MGs. Measured toughness values are widely scattered, even for MGs with identical compositions. That is attributed to the combined effect of intrinsic and extrinsic factors including processing, sample geometries, and loading conditions. A fundamental understanding of the influences of these elements is thus of great significance. In the present study, molecular dynamics simulations are performed to investigate the influence of intrinsic and extrinsic effects on the fracture toughness of CuZr MGs. In particular, focused is placed on the effects of cooling rate, notch shape and size, strain rate, and temperature. The results indicate that the fracture toughness of a MG scales with the cooling rate used to prepare it. This is attributed to increased free volume content generated at high cooling rates, which enhances plastic deformation and amplifies the associated energy dissipation during plastic deformation events. Fracture toughness also increases with the strain rate, arguably due to strain rate-induced crack extension delay. Overall, the results demonstrate that the largest fracture toughness are achieved when MG samples are fabricated at high cooling rates and subjected to high strain rate deformation. In addition, results suggest that the fracture toughness decreases with increasing temperature, due to the significant decrease in strength. Here, the correlations revealed between these crucial intrinsic and extrinsic parameters and the calculated MG fracture toughness support the development of a framework to understand the root of the discrepancies in the measurement of the toughness of MGs and provide insights into the design of tough MGs for structural applications.

36 MATERIALS SCIENCE↗

Status of development of the Small Secure Transportable Autonomous Reactor (SSTAR) for worldwide sustainable nuclear energy supply.

Significant progress and improvements have been made on development of a pre-conceptual design of the Secure Transportable Autonomous Reactor (SSTAR) Lead-Cooled Fast Reactor (LFR) concept since it was last reported on at ICAPP 05. SSTAR is a small, 20 MWe (45 MWt), exportable, natural circulation, fast reactor plant concept incorporating proliferation resistance for deployment in non-fuel cycle states and developing nations, fissile self-sufficiency for efficient utilization of uranium resources, autonomous load following making it suitable for small or immature grid applications, and a high degree of passive safety. Customers of SSTAR include: (1) clients looking for energy security at small capital outlay; (2) cities in developing nations; and (3) deregulated independent power producers in developed nations. The SSTAR pre-conceptual design integrates three major features: primary coolant natural circulation heat transport; lead (Pb) coolant; and transuranic nitride fuel in a pool vessel configuration. The Pb coolant flows upward through the core which is an open-lattice of large-diameter (2.5 centimeter) fuel pins containing transuranic nitride pellets clad bonded with liquid Pb to silicon-enhanced ferritic/martensitic (F/M) stainless steel arranged on a triangular pitch with spacing maintained by grid spacers; the core does not incorporate removable fuel assemblies as one means of restricting access to the fuel. The whole core is a single removable assembly with a long lifetime (30 years) at which time refueling equipment is brought onsite. Conversion of the core thermal energy to electricity is accomplished using a supercritical carbon dioxide (S-CO{sub 2}) Brayton cycle energy converter providing higher plant efficiencies and lower balance of plant costs than the traditional Rankine steam cycle operating at the same reactor core outlet temperature. A control strategy has been developed for automatic control of the S-CO{sub 2} Brayton cycle in principle enabling autonomous load following over the full power range between nominal and essentially zero power whereby the reactor core power adjusts itself to the heat removal from the reactor system to the power converter through the large reactivity feedback of the fast spectrum core without the need for motion of control rods, while the automatic control of the power converter matches the heat removal from the reactor to the grid load. A safety design approach has been formulated for SSTAR based upon defense-in-depth providing multiple levels of protection against the release of radioactive materials. The inherent safety features of the lead coolant (T{sub boil} = 1740 C, lack of chemical reaction of Pb with the CO{sub 2} working fluid, low absorption of neutrons by Pb, and the heavy Pb), nitride fuel (high thermal conductivity, transuranic nitride decomposition temperature {approx} 1300 C, compatibility with cladding, low volumetric swelling and fission gas release), fast neutron spectrum core, pool vessel configuration, natural circulation, and containment enable the requirements for each level of protection to be readily met or exceeded. The interest in higher plant efficiencies has heretofore driven interest in operation of SSTAR at higher Pb temperatures to take advantage of the increase in plant efficiency with temperature of the S-CO{sub 2} Brayton cycle. A peak cladding temperature of 650 C has been used as a goal; at this temperature, a reactor core outlet temperature of 564 C is achieved resulting in a Brayton cycle efficiency of 44.2 % and a net plant efficiency of 43.8 %. It has always been recognized that this would require the development of cladding and structural materials for long-term service in Pb coolant up to 650 C peak cladding temperature with corrosion protection provided by active maintenance and control of the dissolved oxygen potential in the coolant giving rise to the formation of protective oxide layers on the steel cladding and structures. SSTAR development has been supported by the testing in the DELTA loop at Los Alamos National Laboratory of alloy specimens with special treatments or coatings which might enhance corrosion resistance at the temperatures at which SSTAR operates. The focus of LFR development in the U.S. is now shifting towards the development of a near-term deployable LFR test demonstrator and a near-term deployable small exportable LFR. Both reactors would operate at lower temperatures enabling the use of existing materials such as T91 or HT9 F/M stainless steel that is already incorporated into the ASME codes and have been shown to have corrosion resistance to lead-bismuth eutectic with active oxygen control at temperatures below about 550 C in experiments carried out in the DELTA loop and elsewhere.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

HEAT INPUT AND POST WELD HEAT TREATMENT EFFECTS ON REDUCED-ACTIVATION FERRITIC/MARTENSITIC STEEL FRICTION STIR WELDS

Reduced-activation ferritic/martensitic (RAFM) steels are an important class of structural materials for fusion reactor internals developed in recent years because of their improved irradiation resistance. However, they can suffer from welding induced property degradations. In this paper, a solid phase joining technology friction stir welding (FSW) was adopted to join a RAFM steel Eurofer 97 and different FSW parameters/heat input were chosen to produce welds. FSW response parameters, joint microstructures and microhardness were investigated to reveal relationships among welding heat input, weld structure characterization and mechanical properties. In general, FSW heat input results in high hardness inside the stir zone mostly due to a martensitic transformation. It is possible to produce friction stir welds similar to but not with exactly the same base metal hardness when using low power input because of other hardening mechanisms. Further, post weld heat treatment (PWHT) is a very effective way to reduce FSW stir zone hardness values.

Tang, Wei↗

In-Situ Measurements of Engineered Nanoporous Particle Transport in Saturated Porous Media

Engineered nanoporous particles have become an important class of nano-structured materials that have found their increasing industrial, energy, and environmental applications. The internal pore surfaces in the particles can be chemically tailored to sequestrate metals and radionuclide contaminants from groundwater. The fate and transport of the nanoporous particles in subsurface environments, however, have not been studied. Here we present a scanning optical fiber fluorescence profiler that can be used to in situ measure the transport of fluorescence-tagged colloidal and nano-structured particles in column systems. Engineered nanoporous silicate particles (ENSPs) that were covalently bonded with fluorescence-emitting, and uranium-chelating ligands in the intraparticle pore domains were synthesized and used as an example to investigate the nanoporous particle transport and to demonstrate the application of the developed in situ measurement profiler. The profiler detected an irreversible or slowly detached fraction of ENSPs in the sand collector even under conditions thermodynamically unfavorable to particle attachment. Further, the in situ measurement system detected the spatial variability of ENSPs transport that deviated from one-dimensional, homogeneous assumption that is typically used to model particle transport in the column. Generally, however, both measured and model-calculated results indicated that the transport of ENSPs were consistent with that of nonporous colloidal particles that subjected to coupled reversible attachment/detachment and straining processes. The developed system can also be applied to detect other fluorescence-tagged nano-structured or colloidal particle transport.

54 ENVIRONMENTAL SCIENCES↗

Creation of hollow silica-fiberglass soft ceramics for thermal insulation

Hollow-structured materials show promise in thermal insulation because the shells encapsulating gaseous voids can interrupt heat transport pathways. Here, in this study, we present two low-cost routes to fabricate hollow silica nanoshells, via gas-phase and liquid-phase methods. The gas-phase synthesis method generates hollow shells by a droplet surface precipitation mechanism in a flame aerosol reactor. The liquid-phase synthesis route forms hollow shells by removal of a carbon template, which is produced by hydrothermal reaction of glucose. Both approaches (gas- and liquid-phase) provide hollow silica with amorphous structure, low thermal conductivity (0.023 and 0.026 W m –1 K –1 ), small particle size (442 and 383 nm), thin shell (35 and 36 nm), and low density (0.015 and 0.033 g cm –3 ). We employed high shear mechanical mixing to fabricate hollow silica-fiberglass composite ceramics. The resulting three-dimensional network provides the ceramics with robust mechanical elasticity and fire-retardancy while maintaining low thermal conductivity, dramatically outperforming an analogous material using commercial silica gel in place of the hollow nanoshells. Our findings provide two practical routes to synthesize hollow silica, either of which can be used to manufacture a class of hollow shell-fiber nanocomposite soft ceramics for energy-saving applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous aluminosilicate glasses: Potential materials for dye removal from wastewater effluents

Mesoporous amorphous sodium-aluminosilicate host matrices of composition Si{sub 1−x}Al{sub x}Na{sub x}O{sub 2}, 0.1 ≤ x ≤ 0.33, obtained by sol-gel methodology, have been used as sequestrating agents for the cationic dye Rhodamine 6 G (Rh6G) in solution. Favorable adsorption kinetics and a wide pH working range (4–10) as well as high sorption capacities for Rh6G render these materials potentially useful reagents for effective dye removal from wastewaters. While the experimentally realized sorption capacities fall significantly below the theoretical limits, used materials can be thermally re-cycled by pyrolizing the sequestrated dye molecules. Solid state NMR and BET measurements show that this process occurs under preservation of the materials' structural integrity, allowing it to be re-used multiple times. - Graphical abstract: Sorption of rhodamine dye by mesoporous sodium aluminosilicate. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗