Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

High-Throughput Screening for Acid-Stable Oxygen Evolution Electrocatalysts in the (Mn–Co–Ta–Sb)O x Composition Space

Solar generation of fuel is a promising future energy technology, and strong acidic conditions are highly desirable for integrated solar hydrogen generators. In particular, water splitting near pH 0 is attractive due to the availability of high theoretical efficiency, high performance hydrogen evolution catalysts, and robust ion exchange membranes. The lack of a stable, earth-abundant oxygen evolution catalyst inhibits deployment of this technology, and development of such a material is hampered by the strong anti-correlation between electrochemical stability and catalytic activity of non-precious metal oxides. High-throughput screening of mixed metal oxides offers a promising route to the identification of new stable catalysts and requires careful design of experiments to combine the concepts of rapid experimentation and long-term stability. By combining serial and parallel measurement techniques, we have created a high-throughput platform to assess the catalytic activity of material libraries in the as-prepared state and after 2 h of operation. By screening the entire (Mn–Co–Ta–Sb)O x composition space, we observe that the compositions with highest initial activity comprised cobalt and manganese oxides, but combinations with antimony and tantalum offer improved stability. Finally, by combining the desired properties of catalytic activity and stability, the optimal composition regions are readily identified, demonstrating the success and fidelity of this novel high-throughput screening platform.

10 SYNTHETIC FUELS↗

Effect of the properties of a porous coating on boundary layer stability

Drawing off gas from the boundary layer is a well-known method for increasing the stability of boundary layers. The increase in stability is primarily connected with a change in the velocity profile form in the case of suction. On the basis of the assumption that the velocity perturbations on a porous slate do not equal zero, the influence of the properties of a permeable surface upon the boundary layer stability were studied.

Gaponov, S. A.↗

Electronic structural and lattice thermodynamic properties of MAlO2 and M5AlO4 (M = Li, Na, K) sorbents for CO2 capture applications

Abstract The electronic properties and thermal stabilities of MAlO 2 and M 5 AlO 4 (M = Li, Na, K) are investigated by density functional theory and lattice phonon dynamics. Based on the calculated electronic and lattice thermodynamic properties, their abilities to capture CO 2 as solid sorbents are analyzed. The calculated electronic structural properties of MAlO 2 and M 5 AlO 4 indicate that all these alkali aluminates are semiconductors with a bandgap range of 2.4 ~ 6.4 eV. The 1st valence bands of these alkali aluminates are located 0 ~ − 6 eV under Fermi levels and are mainly contributed by p orbitals of O, s and p orbitals of Al and M. The phonon vibrational frequencies of M 5 AlO 4 spread at a lower frequency range compared to their MAlO 2 phases. With increasing temperature, the calculated phonon free energies of M 5 AlO 4 decrease faster than their corresponding MAlO 2 while their entropies have opposite trends. The reaction 2MAlO 2 + CO 2 = M 2 CO 3 + Al 2 O 3 has higher reaction heat and Gibbs free energy change than those of corresponding reaction 2 / 5 M 5 AlO 4 + CO 2 = M 2 CO 3 + 1 / 5 Al 2 O 3 , which shows the former reaction possesses lower turnover temperature. Among the alkali aluminates studied, the β-NaAlO 2 , lt-KAlO 2 , and γ-LiAlO 2 are better candidates that could be applied for CO 2 capture technologies. Graphical Abstract

36 MATERIALS SCIENCE↗

Rapid discovery of high hardness multi-principal-element alloys using a generative adversarial network model

Multi-principal element alloys (MPEAs) continue to gain research prominence due to their promising high-temperature microstructural and mechanical properties. Recently, machine learning (ML) and materials informatics have been used extensively for screening MPEAs, however, most of these efforts were focused on constructing classification and regression models for predicting phase stability and mechanical properties of known compositions. These approaches may accelerate the screening process but optimizing new compositions with desirable properties within a practical time frame from an infinitely large design space of MPEA systems remains a grand challenge. To tackle this composition optimization challenge, a generative adversarial network coupled with a neural-network ML model was utilized to design MPEAs by filtering compositions that have high hardness. Even in a high-dimensional space with 18 elements as descriptors, the ML model was able to generate optimized compositions from which one composition was found to have 10% higher hardness (941 HV) than the maximum in the training data (857 HV). Density-functional theory was used to provide thermodynamic and electronic insights to higher hardness of the new MPEA found. The present work can optimize compositions from a wide design space of 18 elements (including W, Ta and Nb) that presents an opportunity to synthesize new compositions for applications ranging from corrosion-resistant alloys to nuclear materials. Here the findings suggest that generative ML can greatly accelerate materials discovery by identifying novel compositions, which can serve as a data-informed tool to guide experiments.

36 MATERIALS SCIENCE↗

Interdiffusion in W/Si Multilayers with Boron Carbide Interlayers

W/Si multilayers with B{sub 4}C as a diffusion barrier were deposited using ion beam sputtering technique. It was found that incorporation of B{sub 4}C at both interfaces of Si enhances the reflectivity of the multilayer. Though the interface of W/Si or W/B{sub 4}C has been studied in literature, what happens at Si/B{sub 4}C interfaces is largely unknown. This is primarily due to absence of contrast between Si/B{sub 4}C for x-rays. For neutrons there is significant contrast between Si and B{sub 4}C, therefore we used neutron reflectivity to study thermal stability of Si/B{sub 4}C multilayers. It was found that up to an annealing temperature of 573 K, the multilayer remains intact however at higher temperature interdiffusion starts.

36 MATERIALS SCIENCE↗

Nuclear exoticism

Extreme states of nuclearmatter (such that feature high spins, large deformations, high density and temperature, or a large excess of neutrons and protons) play an important role in studying fundamental properties of nuclei and are helpful in solving the problem of constructing the equation of state for nuclear matter. The synthesis of neutron-rich nuclei near the nucleon drip lines and investigation of their properties permit drawing conclusions about the positions of these boundaries and deducing information about unusual states of such nuclei and about their decays. At the present time, experimental investigations along these lines can only be performed via the cooperation of leading research centers that possess powerful heavy-ion accelerators, such as the Large Hadron Collider (LHC) at CERN and the heavy-ion cyclotrons at the Joint Institute for Nuclear Research (JINR, Dubna), where respective experiments are being conducted by physicists from about 20 JINR member countries. The present article gives a survey of the most recent results in the realms of super neutron-rich nuclei. Implications of the change in the structure of such nuclei near the nucleon drip lines are discussed. Information about the results obtained by measuring the masses (binding energies) of exotic nuclei, the nucleon-distribution radii (neutron halo) and momentum distributions in them, and their deformations and quantum properties is presented. It is shown that the properties of nuclei lying near the stability boundaries differ strongly from the properties of other nuclei. The problem of the stability of nuclei that is associated with the magic numbers of 20 and 28 is discussed along with the effect of new magic numbers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Time-dependent Protein-directed Growth of Gold Nanoparticles within a Single Crystal of Lysozyme

Gold nanoparticles are useful in biomedical applications due to their distinct optical properties and high chemical stability. Reports of the biogenic formation of gold colloids from gold complexes has also led to an increased level of interest in the biomineralization of gold. However, the mechanism responsible for biomolecule-directed gold nanoparticle formation remains unclear due to the lack of structural information about biological systems and the fast kinetics of biomimetic chemical systems in solution. Here we show that intact single crystals of lysozyme can be used to study the time-dependent, protein-directed growth of gold nanoparticles. The protein crystals slow down the growth of the gold nanoparticles, allowing detailed kinetic studies to be carried out, and permit a three-dimensional structural characterization that would be difficult to achieve in solution. Furthermore, we show that additional chemical species can be used to fine-tune the growth rate of the gold nanoparticles.

59 BASIC BIOLOGICAL SCIENCES↗

Photocatalytic activity and stability of TiO{sub 2} and WO{sub 3} thin films

Photocatalysis represents a viable option for complete degrading the dye molecules resulted in the textile industry, up to products that do not represent environmental threats. The photocatalytic degradation of methyl orange has been investigated using TiO{sub 2}, WO{sub 3} and mixed thin films. The photodegradation efficiency is examined in correlation with the experimental parameters (irradiation time, H{sub 2}O{sub 2} addition and stability), along with the morphology and crystallinity data. The H{sub 2}O{sub 2} addition increases the photodegradation efficiency by providing additional hydroxyl groups and further reducing the recombination of the electron-hole pairs by reacting with the electrons at the catalyst interface. To test the stability of the photocatalytic films in long time running processes, batch series of experiments were conducted using contact periods up to 9 days. The results show that the thin films maintained their photocatalytic properties confirming their stability and viability for up-scaling. Highlights: Black-Right-Pointing-Pointer TiO{sub 2}, WO{sub 3} and mixed thin films Black-Right-Pointing-Pointer We tested the photocatalytic activity and photocatalyst stability over a period up to 9 days of continuous irradiation. Black-Right-Pointing-Pointer The influence of medium pH and oxidizing agent (H{sub 2}O{sub 2}) was analyzed.

36 MATERIALS SCIENCE↗

First-principles insights into Si substitution effects in Sm 2 (Fe,Si) 17 C x magnet

The partial substitution of Fe by Si enhances the phase stability of Sm 2 Fe 17 C x magnets with x > 1.0. Here, we elucidate the Si-substitution scheme and its impact on phase stability and magnetic properties in Sm 2 (Fe,Si) 17 C 3 from first-principles calculations and chemical bonding analysis. The calculated substitution energies for Si at various Fe sites are negative, indicating improved phase stability. Si preferentially substitutes Fe atoms at the 9d site in Sm 2 (Fe,Si) 17 C 3 while it tends to enter the Fe 18h site in Sm 2 (Fe,Si) 17 . This difference in site preference is attributed to the distinct chemical environments surrounding the Fe (Si) sites in the two compounds. Si substitution favors the formation of Sm–Si bonds while minimizing the Si–C and Si–Si interactions. Crystal orbital Hamilton populations and crystal orbital bond index calculations indicate that the partial replacement of Fe with Si strengthens the chemical bonding of Sm–Fe 3 (18f) and Sm–Fe 4 (18h) and improves overall phase stability in Sm 2 (Fe,Si) 17 C 3 . Beyond the dilution effect, Si substitution also reduces the magnetic moments of neighboring Fe atoms, a phenomenon linked to the strong Fe–Si bonding. These findings highlight the dual role of Si in modifying both the structural and magnetic characteristics of Sm 2 Fe 17 -based magnetic compounds.

Chemical bonding↗

Theory of the lattice Boltzmann Method: Dispersion, Dissipation, Isotropy, Galilean Invariance, and Stability

The generalized hydrodynamics (the wave vector dependence of the transport coefficients) of a generalized lattice Boltzmann equation (LBE) is studied in detail. The generalized lattice Boltzmann equation is constructed in moment space rather than in discrete velocity space. The generalized hydrodynamics of the model is obtained by solving the dispersion equation of the linearized LBE either analytically by using perturbation technique or numerically. The proposed LBE model has a maximum number of adjustable parameters for the given set of discrete velocities. Generalized hydrodynamics characterizes dispersion, dissipation (hyper-viscosities), anisotropy, and lack of Galilean invariance of the model, and can be applied to select the values of the adjustable parameters which optimize the properties of the model. The proposed generalized hydrodynamic analysis also provides some insights into stability and proper initial conditions for LBE simulations. The stability properties of some 2D LBE models are analyzed and compared with each other in the parameter space of the mean streaming velocity and the viscous relaxation time. The procedure described in this work can be applied to analyze other LBE models. As examples, LBE models with various interpolation schemes are analyzed. Numerical results on shear flow with an initially discontinuous velocity profile (shock) with or without a constant streaming velocity are shown to demonstrate the dispersion effects in the LBE model; the results compare favorably with our theoretical analysis. We also show that whereas linear analysis of the LBE evolution operator is equivalent to Chapman-Enskog analysis in the long wave-length limit (wave vector k = 0), it can also provide results for large values of k. Such results are important for the stability and other hydrodynamic properties of the LBE method and cannot be obtained through Chapman-Enskog analysis.

Lallemand, Pierre↗

Improved the microstructures and properties of M3:2 high-speed steel by spray forming and niobium alloying

The microstructures and properties of spray formed (SF) high-speed steels (HSSs) with or without niobium (Nb) addition were studied. Particular emphasis was placed on the effect of Nb on the solidification microstructures, decomposition of M{sub 2}C carbides, thermal stability and mechanical properties. The results show that spray forming can refine the cell size of eutectic carbides due to the rapid cooling effect during atomization. With Nb addition, further refinement of the eutectic carbides and primary austenite grains are obtained. Moreover, the Nb addition can accelerate the decomposition of M{sub 2}C carbides and increase the thermal stability of high-speed steel, and also can improve the hardness and bending strength with slightly decrease the impact toughness. The high-speed steel made by spray forming and Nb alloying can give a better tool performance compared with powder metallurgy M3:2 and commercial AISI M2 high-speed steels. - Highlights: • Spray forming can effectively refine the microstructure of M3:2 steel. • Niobium accelerates the decomposition of M{sub 2}C carbides. • Niobium increases the hardness and bending strength of spray formed M3:2 steel. • Spray-formed niobium-containing M3:2 steel has the best tool performance.

36 MATERIALS SCIENCE↗

Magnetostructural, mechanical and electronic properties of manganese tetraboride

Magnetostructural stabilities, mechanical behaviors and electronic structures of various phases of manganese tetraboride (MnB{sub 4}) have been investigated systematically by density functional theory (DFT) based first-principles methods. It is found that MnB{sub 4} undergoes temperature-induced phase transitions from the nonmagnetic (NM) monoclinic mP20 structure to the ferromagnetic (FM) orthorhombic oP10 structure at 438 K, then to the antiferromagnetic (AFM) orthorhombic oP10 structure at 824 K. We reveal that the NM insulating mP20 phase stabilizes by the Peierls distortion breaking the structural degeneracy, while the FM and AFM metallic oP10 phases stabilize by the Stoner magnetism lifting the spin degeneracy. Furthermore, the calculated mechanical properties show that the NM mP20, FM oP10, and AFM oP10 phases exhibit low compressibility and high hardness, which originate from their three-dimensional covalent boron networks. Therefore, this unique temperature-assisted insulator-metal transition, strong stiffness and high hardness suggest that MnB{sub 4} may find promising technological applications as thermoelectric switches and field effect transistors at the extreme conditions.

36 MATERIALS SCIENCE↗

Switchable electronic and enhanced magnetic properties of CrI 3 edges

Owing to its novel electronic and magnetic properties, two-dimensional CrI 3 has great potential in the application of spintronic devices. However, as an inevitable line defect, the properties of the edges of CrI 3 remain elusive. Here, via first-principles calculations with spin–orbit coupling, we investigated the thermodynamic stabilities, electronic and magnetic properties of thirteen CrI 3 edges with different structures. We showed that zigzag edges are more stable than armchair edges, and a CrI 3 nanoribbon can be either metallic or insulating depending on its chemical growth conditions. Here, the edge stability and associated electronic properties can be understood in terms of the octahedron ligand field and electron counting model. In most cases, both the magnetic moment and Curie temperature can be enhanced by edges, which are in startle contrast to the surfaces of three-dimensional ferromagnetic materials, where a magnetic dead layer is often observed.

36 MATERIALS SCIENCE↗

An inorganic capping strategy for the seeded growth of versatile bimetallic nanostructures

Metal nanostructures have attracted great attention in various fields due to their tunable properties through precisely tailored sizes, compositions and structures. Using mesoporous silica (mSiO 2 ) as the inorganic capping agent and encapsulated Pt nanoparticles as the seeds, we developed a robust seeded growth method to prepare uniform bimetallic nanoparticles encapsulated in mesoporous silica shells (PtM@mSiO 2 , M = Pd, Rh, Ni and Cu). Unexpectedly, we found that the inorganic silica shell is able to accommodate an eight-fold volume increase in the metallic core by reducing its thickness. The bimetallic nanoparticles encapsulated in mesoporous silica shells showed enhanced catalytic properties and thermal stabilities compared with those prepared with organic capping agents. As a result, this inorganic capping strategy could find a broad application in the synthesis of versatile bimetallic nanostructures with exceptional structural control and enhanced catalytic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Scalable and Quench-Free Processing of Metal Halide Perovskites in Ambient Conditions

With the rise of global warming and the growing energy crisis, scientists have pivoted from typical resources to look for new materials and technologies. Perovskite materials hold the potential for making high-efficiency, low-cost solar cells through solution processing of Earth-abundant materials; however, scalability, stability, and durability remain key challenges. In order to transition from small-scale processing in inert environments to higher throughput processing in ambient conditions, the fundamentals of perovskite crystallization must be understood. Classical nucleation theory, the LaMer relation, and nonclassical crystallization considerations are discussed to provide a mechanism by which a gellan gum (GG) additive—a nontoxic polymeric saccharide—has enabled researchers to produce quality halide perovskite thin-film blade coated in ambient conditions without a quench step. Furthermore, we report on the improved stability and durability properties inherent to these films, which feature improved morphologies and optoelectronic properties compared to films spin-coated in a glovebox with antisolvent. We tune the amount of GG in the perovskite precursor and study the interplay between GG concentration and processability, morphological control, and increased stability under humidity, heat, and mechanical testing. The simplicity of this approach and insensitivity to environmental conditions enable a wide process window for the production of low-defect, mechanically robust, and operationally stable perovskites with fracture energies among the highest obtained for perovskites.

14 SOLAR ENERGY↗

Legendre-Tau approximation for functional differential equations. Part 3: Eigenvalue approximations and uniform stability

The stability and convergence properties of the Legendre-tau approximation for hereditary differential systems are analyzed. A charactristic equation is derived for the eigenvalues of the resulting approximate system. As a result of this derivation the uniform exponential stability of the solution semigroup is preserved under approximation. It is the key to obtaining the convergence of approximate solutions of the algebraic Riccati equation in trace norm.

Ito, K.↗

Legendre-tau approximation for functional differential equations. III - Eigenvalue approximations and uniform stability

The stability and convergence properties of the Legendre-tau approximation for hereditary differential systems are analyzed. A characteristic equation is derived for the eigenvalues of the resulting approximate system. As a result of this derivation the uniform exponential stability of the solution semigroup is preserved under approximation. It is the key to obtaining the convergence of approximate solutions of the algebraic Riccati equation in trace norm.

Ito, K.↗

Chance-Constrained System Identification of Nonlinear Discrete Systems with Safety and Stability Guarantees

This paper presents a discrete-time nonlinear system identification method while satisfying the stability and safety properties of the system with high probability. An Extreme Learning Machine (ELM) is used with a Gaussian assumption on the function reconstruction error. A quadratically constrained quadratic program (QCQP) is developed with probabilistic safety and stability constraints that are only required to be satisfied at sampled points inside the invariant region. The proposed method is validated using two simulation examples: a two degrees-of-freedom (DoF) robot manipulator with constraints on joint angles whose trajectories are guaranteed to remain inside a safe set and on motion trajectories data of a hand-drawn shape.

Iman Salehi↗