SEARCH · Engineering Papers

Results for “spatial constraints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

DOE OSTI2023

11-th order of accuracy for numerical solution of 3-D Poisson equation with irregular interfaces on unfitted Cartesian meshes

For the first time the optimal local truncation error method (OLTEM) with 125-point stencils and unfitted Cartesian meshes has been developed in the general 3-D case for the Poisson equation for heterogeneous materials with smooth irregular interfaces. The 125-point stencils equations that are similar to those for quadratic finite elements are used for OLTEM. The interface conditions for OLTEM are imposed as constraints at a small number of interface points and do not require the introduction of additional unknowns, i.e., the sparse structure of global discrete equations of OLTEM is the same for homogeneous and heterogeneous materials. The stencils coefficients of OLTEM are calculated by the minimization of the local truncation error of the stencil equations. These derivations include the use of the Poisson equation for the relationship between the different spatial derivatives. Such a procedure provides the maximum possible accuracy of the discrete equations of OLTEM. In contrast to known numerical techniques with quadratic elements and third order of accuracy on conforming and unfitted meshes, OLTEM with the 125-point stencils provides 11-th order of accuracy, i.e., an extremely large increase in accuracy by 8 orders for similar stencils. The numerical results show that OLTEM yields much more accurate results than high-order finite elements with much wider stencils. The increased numerical accuracy of OLTEM leads to an extremely large increase in computational efficiency. Additionally, a new post-processing procedure with the 125-point stencil has been developed for the calculation of the spatial derivatives of the primary function. The post-processing procedure includes the minimization of the local truncation error and the use of the Poisson equation. It is demonstrated that the use of the partial differential equation (PDE) for the 125-point stencils improves the accuracy of the spatial derivatives by 6 orders compared to post-processing without the use of PDE as in existing numerical techniques. At an accuracy of 0.1% for the spatial derivatives, OLTEM reduces the number of degrees of freedom by 900 - 4∙10 6 times compared to quadratic finite elements. The developed post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing post-processing techniques (e.g., with finite elements).

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Consensus Equilibrium for Subsurface Delineation

Heterogeneity and insufficient site characterization limit our knowledge of the subsurface. Inversion techniques, which minimize the mismatch between observations and model predictions, have become an essential tool of subsurface characterization. Most optimization-based approaches fail to incorporate various implicit priors and capture the geological complexity. We overcome these limitations by deploying the plug-and-play and consensus equilibrium (CE) strategies, which provide a flexible framework for image reconstruction. Our CE methodology for spatial delineation of geologic formations consists of an image denoiser and a variational auto-encoder (deep learning-based emulator). The former ameliorates the reconstruction noise, yielding well-defined geological structures; its mathematical equivalence with the proximal operator allows the deployment of advanced denoisers (e.g., CNN-based denoiser) that do not correspond to a regularization objective. The latter defines a geology prior that imposes a geological constraint, for example, continuity and shape of geological features, onto the reconstructed image. Here, we conduct a series of numerical experiments dealing with transient two-dimensional flow driven by a pumping well and natural hydraulic head gradient. They demonstrate the CE framework's ability to delineate, both probabilistically and deterministically, complex subsurface environments with sufficient quality.

42 ENGINEERING↗

DOE OSTI2016

Challenges in constraining anthropogenic aerosol effects on cloud radiative forcing using present-day spatiotemporal variability

A large number of processes are involved in the chain from emissions of aerosol precursor gases and primary particles to impacts on cloud radiative forcing. Those processes are manifest in a number of relationships that can be expressed as factors dlnX/dlnY driving aerosol effects on cloud radiative forcing. These factors include the relationships between cloud condensation nuclei (CCN) concentration and emissions, droplet number and CCN concentration, cloud fraction and droplet number, cloud optical depth and droplet number, and cloud radiative forcing and cloud optical depth. The relationship between cloud optical depth and droplet number can be further decomposed into the sum of two terms involving the relationship of droplet effective radius and cloud liquid water path with droplet number. These relationships can be constrained using observations of recent spatial and temporal variability of these quantities. However, we are most interested in the radiative forcing since the preindustrial era. Because few relevant measurements are available from that era, relationships from recent variability have been assumed to be applicable to the preindustrial to present-day change. Our analysis of Aerosol Comparisons between Observations and Models (AeroCom) model simulations suggests that estimates of relationships from recent variability are poor constraints on relationships from anthropogenic change for some terms, with even the sign of some relationships differing in many regions. Proxies connecting recent spatial/temporal variability to anthropogenic change, or sustained measurements in regions where emissions have changed, are needed to constrain estimates of anthropogenic aerosol impacts on cloud radiative forcing.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

CO2ROpt (Feedstock Allocation Optimization Model) [SWR-22-13]

Reducing greenhouse gas emissions remains a critical challenge for the transportation and chemical sectors. The electrochemical reduction of carbon dioxide is a potential pathway for production of fuels and chemicals that uses atmospheric carbon dioxide as a feedstock. Here we present an analysis of the potential for carbon dioxide captured from point sources and via direct air capture to be utilized in electrochemical reduction under different market scenarios. Using a numerical optimization framework and national data sets, scenarios for nationwide production of ethylene, formate, and carbon monoxide are evaluated at scales comparable to current production of these molecules in the United States. We show that developing a network for production of these products at scale requires capture and utilization of significant portions of the carbon dioxide that is currently emitted from large stationary point sources. Because carbon dioxide point sources are spatially and compositionally variable, their use for carbon dioxide reduction depends on electricity prices, capture cost, and location. If the power sector in the United States is decarbonized, carbon dioxide supply decreases significantly, increasing the importance of utilizing other carbon dioxide streams, and increasing the likelihood that direct air capture plays a role in supplying carbon dioxide feedstocks. These findings provide a first insight into the feedstock and energy constraints for carbon dioxide reduction.

Badgett, Alex↗

DOE OSTI2023

Active Galactic Nuclei Feedback in SDSS-IV MaNGA: AGNs Have Suppressed Central Star Formation Rates

Despite the importance of feedback from active galactic nuclei (AGNs) in models of galaxy evolution, observational constraints on the influence of AGN feedback on star formation remain weak. To this end, we have compared the star formation trends of 279 low-redshift AGN galaxies with 558 inactive control galaxies using integral field unit spectroscopy from the Sloan Digital Sky Survey-IV Mapping Nearby Galaxies at Apache Point Observatory survey. With a Gaussian-process-based methodology, we reconstruct nonparametric star formation histories in spatially resolved spaxels covering the face of each galaxy. Based on the galaxy-wide star formation rates (SFRs) alone, we find no obvious signatures of AGN feedback. However, the AGN galaxies have significantly suppressed central (kiloparsec-scale) SFRs, lying up to a factor of 2 below those of the control galaxies, providing direct observational evidence of AGN feedback suppressing star formation. The suppression of central SFRs in the AGN galaxies began in the central regions ~6 Gyr ago (redshift z ~ 0.7), taking place over a few gigayears. A small subset of the AGN galaxies were rapidly driven to quiescence shortly before being observed (in the last 500 Myr), potentially indicating instances of AGN-driven feedback. More frequently, however, star formation continues in the AGN galaxies, with suppression primarily in the central regions. This is suggestive of a picture in which integrated (gigayear-timescale) AGN feedback can significantly affect central star formation, but may be inefficient in driving galaxy-wide quenching in low-redshift galaxies, instead leaving them in the green valley.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Leveraging the signature of heterotrophic respiration on atmospheric CO 2 for model benchmarking

Spatial and temporal variations in atmospheric carbon dioxide (CO 2 ) reflect large-scale net carbon exchange between the atmosphere and terrestrial ecosystems. Soil heterotrophic respiration (HR) is one of the component fluxes that drive this net exchange, but, given observational limitations, it is difficult to quantify this flux or to evaluate global-scale model simulations thereof. Here, we show that atmospheric CO 2 can provide a useful constraint on large-scale patterns of soil heterotrophic respiration. We analyze three soil model configurations (CASA-CNP, MIMICS, and CORPSE) that simulate HR fluxes within a biogeochemical test bed that provides each model with identical net primary productivity (NPP) and climate forcings. We subsequently quantify the effects of variation in simulated terrestrial carbon fluxes (NPP and HR from the three soil test-bed models) on atmospheric CO 2 distributions using a three-dimensional atmospheric tracer transport model. Our results show that atmospheric CO 2 observations can be used to identify deficiencies in model simulations of the seasonal cycle and interannual variability in HR relative to NPP. In particular, the two models that explicitly simulated microbial processes (MIMICS and CORPSE) were more variable than observations at interannual timescales and showed a stronger-than-observed temperature sensitivity. Our results prompt future research directions to use atmospheric CO 2 , in combination with additional constraints on terrestrial productivity or soil carbon stocks, for evaluating HR fluxes.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1992

Localization in virtual acoustic displays

This paper discusses the development of a particular spatial display medium, the virtual acoustic display. Although the technology can stand alone, it is envisioned ultimately to be a component of a larger multisensory environment and will no doubt find its greatest utility in that context. A general philosophy of the project has been that the development of advanced computer interfaces should be driven first by an understanding of human perceptual requirements, and secondarily by technological capabilities or constraints. In expanding on this view, the paper addresses why virtual acoustic displays are useful, characterizes the abilities of such displays, reviews some recent approaches to their implementation and application, describes the research project at NASA Ames in some detail, and finally outlines some critical research issues for the future.

Wenzel, Elizabeth M.↗

NASA NTRS2003

Environmental Snapshots for Satellite Multi-Angle Aerosol Retrieval Validation During the ACE-Asia Field Campaign

On five occasions spanning the ACE-Asia field experiment in spring 2001, the multi-angle imaging MISR instrument, flying aboard the NASA Earth Observing System s Terra satellite, took quarter-kilometer data over a 400-km-wide swath, coincident with high-quality observations by multiple instruments on two or more participating surface and airborne platforms. The cases capture a range of clean, polluted, and dusty aerosol conditions. They represent some of the best opportunities during ACE- Asia for comparative studies among intensive and extensive aerosol observations in their environmental context. We inter-compare related measurements and discuss the implications of apparent discrepancies for each case, at a level of detail appropriate to the analysis of satellite observations. With a three-stage optical modeling process, we synthesize data from multiple sources into layer-by-layer snapshots that summarize what we know about the state of the atmosphere and surface at key locations during each event, to be used for satellite vicarious calibration and aerosol retrieval validation. Aerosols within a few kilometers of the surface were composed primarily of pollution and Asian dust mixtures, as expected. Accumulation and coarse-mode particle size distributions varied little among the events studied, but column aerosol optical depth changed by more than a factor of four, and the near-surface proportion of dust ranged from about 25% to 50%. The amount of absorbing material in the sub-micron fraction was highest when near-surface winds crossed Beijing and the Korean Peninsula, and was considerably lower for all other cases. Ambiguities remain in segregating size distributions by composition; having simultaneous single scattering albedo measurements at more than a single wavelength would significantly reduce the resulting optical model uncertainties, as would integral constraints from surface and atmospheric radiative flux observations. The consistency of component particle micro-physical properties among the five events, even in this relatively complex aerosol environment, suggests that global, satellite-derived maps of aerosol-air-mass-type extent, combined with targeted in situ measurements, can provide a detailed global picture of aerosol behavior. Further joint satellite and in situ analysis is needed to assess the spatial variability of both intensive and extensive aerosol properties within aerosol air masses in two spatial dimensions.

Kahn, Ralph↗

NASA NTRS2011

SO2 Emissions and Lifetimes: Estimates from Inverse Modeling Using In Situ and Global, Space-Based (SCIAMACHY and OMI) Observations

Top-down constraints on global sulfur dioxide (SO2) emissions are inferred through inverse modeling using SO2 column observations from two satellite instruments (SCIAMACHY and OMI). We first evaluated the S02 column observations with surface SO2 measurements by applying local scaling factors from a global chemical transport model (GEOS-Chem) to SO2 columns retrieved from the satellite instruments. The resulting annual mean surface SO2 mixing ratios for 2006 exhibit a significant spatial correlation (r=0.86, slope=0.91 for SCIAMACHY and r=0.80, slope = 0.79 for OMI) with coincident in situ measurements from monitoring networks throughout the United States and Canada. We evaluate the GEOS-Chem simulation of the SO2 lifetime with that inferred from in situ measurements to verity the applicability of GEOS-Chem for inversion of SO2 columns to emissions. The seasonal mean SO2 lifetime calculated with the GEOS-Chem model over the eastern United States is 13 h in summer and 48 h in winter, compared to lifetimes inferred from in situ measurements of 19 +/- 7 h in summer and 58 +/- 20 h in winter. We apply SO2 columns from SCIAMACHY and OMI to derive a top-down anthropogenic SO2 emission inventory over land by using the local GEOS-Chem relationship between SO2 columns and emissions. There is little seasonal variation in the top-down emissions (<15%) over most major industrial regions providing some confidence in the method. Our global estimate for annual land surface anthropogenic SO2 emissions (52.4 Tg S/yr from SCIAMACHY and 49.9 Tg S / yr from OMI) closely agrees with the bottom-up emissions (54.6 Tg S/yr) in the GEOS-Chem model and exhibits consistency in global distributions with the bottom-up emissions (r = 0.78 for SCIAMACHY, and r = 0.77 for OMI). However, there are significant regional differences.

Lee, Chulkyu↗

DOE OSTI2015

WEIGHING NEUTRINOS WITH COSMIC NEUTRAL HYDROGEN

We investigate the signatures left by massive neutrinos on the spatial distribution of neutral hydrogen (H i) in the post-reionization era by running hydrodynamic simulations that include massive neutrinos as additional collisionless particles. We find that halos in massive/massless neutrino cosmologies host a similar amount of neutral hydrogen, although for a fixed halo mass, on average, the H i mass increases with the sum of the neutrino masses. Our results show that H i is more strongly clustered in cosmologies with massive neutrinos, while its abundance, Ω{sub H} {sub i}(z), is lower. These effects arise mainly from the impact of massive neutrinos on cosmology: they suppress both the amplitude of the matter power spectrum on small scales and the abundance of dark matter halos. Modeling the H i distribution with hydrodynamic simulations at z > 3 and a simple analytic model at z < 3, we use the Fisher matrix formalism to conservatively forecast the constraints that Phase 1 of the Square Kilometre Array will place on the sum of neutrino masses, M{sub ν} ≡ Σ m{sub ν}. We find that with 10,000 hr of interferometric observations at 3 ≲ z ≲ 6 from a deep and narrow survey with SKA1-LOW, the sum of the neutrino masses can be measured with an error σ(M{sub ν}) ≲ 0.3 eV (95% CL). Similar constraints can be obtained with a wide and deep SKA1-MID survey at z ≲ 3, using the single-dish mode. By combining data from MID, LOW, and Planck, plus priors on cosmological parameters from a Stage IV spectroscopic galaxy survey, the sum of the neutrino masses can be determined with an error σ(M{sub ν}) ≃ 0.06 eV (95% CL)

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1983

Spatial Fluctuations in the Diffuse Cosmic X-Ray Background

The bright, essentially isotropic, X-ray sky flux above 2 keV yields information on the universe at large distances. However, a definitive understanding of the origin of the flux is lacking. Some fraction of the total flux is contributed by active galactic nuclei and clusters of galaxies, but less than one percent of the total is contributed by the or approximately 3 keV band resolved sources, which is the band where the sky flux is directly observed. Parametric models of AGN (quasar) luminosity function evolution are examined. Most constraints are by the total sky flux. The acceptability of particular models hinges on assumptions currently not directly testable. The comparison with the Einstein Observatory 1 to keV low flux source counts is hampered by spectral uncertainties. A tentative measurement of a large scale dipole anisotropy is consistent with the velocity and direction derived from the dipole in the microwave background. The impact of the X-ray anisotropy limits for other scales on studies of large-scale structure in the universe is sketched. Models of the origins of the X-ray sky flux are reviewed, and future observational programs outlined.

Shafer, R. A.↗

DOE OSTI2021

Modeled Surface-Atmosphere Fluxes From Paired Sites in the Upper Great Lakes Region Using Neural Networks

The eddy covariance (EC) method is one of the most widely used approaches to quantify surface-atmosphere fluxes. However, scaling up from a single EC tower to the landscape remains an open challenge. To address this, we used 63 site years of data to examine simulated annual and growing season sums of carbon fluxes from three paired land-cover type sites of corn, restored-prairie, and switchgrass ecosystems. This was also done across the landscape by modeling fluxes using different land-cover type input data. An artificial neural network (ANN) approach was used to model net ecosystem exchange (NEE), ecosystem respiration (R eco ), and gross primary production (GPP) at one paired site using environmental observations from the second site only. With a mean spatial separation of 11 km between paired sites, we were able to model annual sums of NEE, R eco , and GPP with uncertainties of 20%, 22%, and 8%, respectively, relative to observation sums. When considering the growing season only, model uncertainties were 17%, 22%, and 9%, respectively for the three flux terms. We also show that ANN models can estimate sums of R eco and GPP fluxes without needing the constraint of similar land-cover-type, with annual uncertainties of 12% and 10%. These results provide new insights to scaling up observations from one EC site beyond the footprint of the EC tower to multiple land-cover types across the landscape.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

ObstacleSense: Low-Power Neuromorphic Vision for Corridor Obstacle Awareness in Low-Level ADAS

The automotive industry’s pursuit of Level 5 autonomy is constrained by substantial perception-compute power requirements, often reaching 1, 000 + watts in full autonomy stacks. Reducing this energy burden requires rethinking perception not only at the high-end autonomy level, but also at the foundational Advanced Driver Assistance Systems (ADAS) level where low-power, safety-critical sensing can have broad impact. Neuromorphic vision provides a promising starting point: HD Dynamic Vision Sensors (DVS) can operate below 100 mW at the sensor level by reporting only asynchronous brightness changes. However, low-power sensing alone is insufficient if downstream perception reintroduces dense, energy-intensive computation. In particular, many event-driven object-detection pipelines still rely on CNN backbones, while purely spiking alternatives often trade away accuracy or ignore deployment constraints. We introduce ObstacleSense, a highly compact, CNN-free hybrid ANN–SNN framework for Level 0–1 forward-corridor obstacle awareness. Instead of performing full-scene object detection with a convolutional feature backbone, ObstacleSense targets the safety-critical question of whether the ego corridor is occupied and how far the nearest obstacle is. The architecture combines polarity-conditioned event encoding, lightweight temporal spiking dynamics, axial spatial mixing, and coarse-to-fine range estimation within a regular fixed-grid compute pattern. This design avoids the dense CNN backbone commonly used in event-based detection while maintaining a small state footprint suitable for eventual small-FPGA deployment. Before hardware mapping, we evaluate the software implementation using a model-side power proxy derived from MACs, weight and activation traffic, and spiking state updates under shared FP16 assumptions. On simulated CARLA event corpora, the deployment-oriented model achieves 0.9464 objectness F1, 0.9978 grid-level mAP, and 0.8987 m distance Mean Absolute Error at an estimated 1.92 mW proxy cost, while maintaining performance on unseen generalization test sequences.

Johnson-Scott, Zac [ORNL]↗

DOE OSTI2024

West African Monsoon System’s Responses to Global Ocean–Regional Atmosphere Coupling

This study explores the added value (AV) of a regional Earth system model (ESM) compared to an atmosphere-only regional climate model (RCM) in simulating West African monsoon (WAM) rainfall. The primary goals are to foster discussions on the suitability of coupled RCMs for WAM projections and deepen our understanding of ocean–atmosphere coupling’s influence on the WAM system. The study employs results from dynamical downscaling of the ERA-Interim reanalysis and Max Plank Institute ESM, low resolution (MPI-ESM-LR), by two RCMs, atmosphere only (REMO) and REMO coupled with Max Planck Institute Ocean Model (MPIOM) (ROM), at ~25-km horizontal resolution. Results show that in regions distant from coupling domain boundaries such as West Africa (WA), constraint conditions from ERA-Interim are more beneficial than coupling effects. REMO, reliant on oceanic sea surface temperatures (SSTs) from observations and influenced by ERA-Interim, is biased under coupling conditions, although coupling offers potential advantages in representing heat and mass fluxes. Contrastingly, as intended, coupling improves SSTs and monsoon fluxes’ relationships under ESM-forced conditions. In this latter case, the coupling features a dipole-like spatial structure of AV, improving precipitation over the Guinea Coast but degrading precipitation over half of the Sahel. Our extensive examination of physical processes and mechanisms underpinning the WAM system supports the plausibility of AV. Additionally, we found that the monsoonal dynamics over the ocean respond to convective activity, with the Sahara–Sahel surface temperature gradient serving as the maintenance mechanism. While further efforts are needed to enhance the coupled RCM, we advocate for its use in the context of WAM rainfall forecasts and projections.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

A New Criterion to Improve Operational Drizzle Detection with Ground-Based Remote Sensing

Light shallow precipitation in the form of drizzle is one of the mechanisms for liquid water removal, affecting cloud lifetime and boundary layer dynamics and thermodynamics. The early formation of drizzle drops is of particular interest for quantifying aerosol–cloud–precipitation interactions. In models, drizzle initiation is represented by the autoconversion, that is, the conversion of liquid water from a cloud liquid water category (where particle sedimentation is ignored) into a precipitating liquid water category. Various autoconversion parameterizations have been proposed in recent years, but their evaluation is challenging due to the lack of proper observations of drizzle development in the cloud. This work presents a new algorithm for Classification of Drizzle Stages (CLADS). CLADS is based on the skewness of the Ka-band radar Doppler spectrum. Skewness is sensitive to the drizzle growth in the cloud: the observed Gaussian Doppler spectrum has skewness zero when only cloud droplets are present without any significant fall velocity. Defining downward velocities positive, skewness turns positive when embryonic drizzle forms and becomes negative when drizzle starts to dominate the spectrum. CLADS identifies spatially coherent structures of positive, zero, and negative skewness in space and time corresponding to drizzle seeding, drizzle growth/nondrizzle, and drizzle mature, respectively. We test CLADS on case studies from the Jülich Observatory for Cloud Evolution Core Facility (JOYCE-CF) and the Barbados Cloud Observatory (BCO) to quantitatively estimate the benefits of CLADS compared to the standard Cloudnet target categorization algorithm. We suggest that CLADS can provide additional observational constraints for understanding the processes related to drizzle formation better.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1997

Multiplexed Holographic Data Storage in Bacteriorhodopsin

High density optical data storage, driven by the information revolution, remains at the forefront of current research areas. Much of the current research has focused on photorefractive materials (SBN and LiNbO3) and polymers, despite various problems with expense, durability, response time and retention periods. Photon echo techniques, though promising, are questionable due to the need for cryogenic conditions. Bacteriorhodopsin (BR) films are an attractive alternative recording medium. Great strides have been made in refining BR, and materials with storage lifetimes as long as 100 days have recently become available. The ability to deposit this robust polycrystalline material as high quality optical films suggests the use of BR as a recording medium for commercial optical disks. Our own recent research has demonstrated the suitability of BR films for real time spatial filtering and holography. We propose to fully investigate the feasibility of performing holographic mass data storage in BR. Important aspects of the problem to be investigated include various data multiplexing techniques (e.g. angle- amplitude- and phase-encoded multiplexing, and in particular shift-multiplexing), multilayer recording techniques, SLM selection and data readout using crossed polarizers for noise rejection. Systems evaluations of storage parameters, including access times, memory refresh constraints, erasure, signal-to-noise ratios and bit error rates, will be included in our investigations.

Mehrl, David J.↗

NASA NTRS2004

Magnetohydrodynamic Convection in the Outer Core and its Geodynamic Consequences

The Earth's fluid outer core is in vigorous convection through much of the Earth's history. In addition to generating and maintaining Earth s time-varying magnetic field (geodynamo), the core convection also generates mass redistribution in the core and a dynamical pressure field on the core-mantle boundary (CMB). All these shall result in various core-mantle interactions, and contribute to surface geodynamic observables. For example, electromagnetic core-mantle coupling arises from finite electrically conducting lower mantle; gravitational interaction occurs between the cores and the heterogeneous mantle; mechanical coupling may also occur when the CMB topography is aspherical. Besides changing the mantle rotation via the coupling torques, the mass-redistribution in the core shall produce a spatial-temporal gravity anomaly. Numerical modeling of the core dynamical processes contributes in several geophysical disciplines. It helps explain the physical causes of surface geodynamic observables via space geodetic techniques and other means, e.g. Earth's rotation variation on decadal time scales, and secular time-variable gravity. Conversely, identification of the sources of the observables can provide additional insights on the dynamics of the fluid core, leading to better constraints on the physics in the numerical modeling. In the past few years, our core dynamics modeling efforts, with respect to our MoSST model, have made significant progress in understanding individual geophysical consequences. However, integrated studies are desirable, not only because of more mature numerical core dynamics models, but also because of inter-correlation among the geophysical phenomena, e.g. mass redistribution in the outer core produces not only time-variable gravity, but also gravitational core-mantle coupling and thus the Earth's rotation variation. They are expected to further facilitate multidisciplinary studies of core dynamics and interactions of the core with other components of the Earth.

Kuang, Weijia↗

NASA NTRS2018

Working Fluid Trade Study for a Two-Phase Mechanically Pumped Loop Thermal Control System

NASA Jet Propulsion Laboratory is investigating a two-phase mechanically pumped fluid loop (MPFL) technology for spacecraft thermal control for future planetary space science mission concepts. The two-phase technology combines the potential of single-phase MPFL and the passive two-phase heat pipe systems. Previous two-phase MPFL studies at JPL have identified an evaporator system with a separated flow architecture as providing a robust light mass thermal control system with very high spatial and temporal thermal stability required by the science instruments on these missions. These studies have further identified the thermophysical properties of the working fluid to be key to the performance of a two-phase fluid loop. This paper describes the methodology used in the selection of the working fluids for optimizing the performance of the two-phase MPFL. A high level model was developed that includes the constraints and boundaries driven by the system components. The performance of fluids from the REFPROP database are investigated and rated for this system. The working fluid attributes such as cost, hazardous properties, and heritage were taken into account in this selection. A typical spacecraft dissipating 1000 W and a fluid loop consisting of an evaporator, accumulator, radiator, and associated tubing components is used as an example in this study.

Daimaru, Takuro↗