Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Capacity Fading Mechanism of the Commercial 18650 LiFePO 4 -Based Lithium-Ion Batteries: An in Situ Time-Resolved High-Energy Synchrotron XRD Study

In this paper, in situ high-energy synchrotron XRD studies were carried out on commercial 18650 LiFePO 4 cells at different cycles to track and investigate the dynamic, chemical, and structural changes in the course of long-term cycling to elucidate the capacity fading mechanism. The results indicate that the crystalline structural deterioration of the LiFePO 4 cathode and the graphite anode is unlikely to happen before capacity fades below 80% of the initial capacity. Rather, the loss of the active lithium source is the primary cause for the capacity fade, which leads to the appearance of inactive FePO 4 that is proportional to the absence of the lithium source. Our in situ HESXRD studies further show that the lithium-ion insertion and deinsertion behavior of LiFePO 4 continuously changed with cycling. For a fresh cell, the LiFePO 4 experienced a dual-phase solid-solution behavior, whereas with increasing cycle numbers, the dynamic change, which is characteristic of the continuous decay of solid solution behavior, is obvious. Finally, the unpredicted dynamic change may result from the morphology evolution of LiFePO 4 particles and the loss of the lithium source, which may be the cause of the decreased rate capability of LiFePO 4 cells after long-term cycling.

18650 cell↗

Efficient Fluorinating Agent through Topochemical Fluorination of Co-Fe Layered Double Hydroxides

Mixed-metal inorganic fluoride, Co 0.60 Fe 0.40 F 3 , solid solutions are obtained through topochemical reactions of Co 2 FeCl(OH) 6 ·2H 2 O LDH with molecular fluorine, F 2 , at temperatures as low as 100 °C. This solid solution possesses interesting F • -releasing ability, and its efficiency as a solid-state fluorinating agent is demonstrated on a commercial polyethylene film. 19 F solid state NMR and contact angle measurements underline the efficient fluorination of this polymer.

Louvain, Nicolas↗

Manufactured Solutions for Solid Mechanics Code Verification -- Hyperelastic Material Case

Increased emphasis on computational simulation for NW qualification merits a corresponding increased diligence in verifying our codes. A manufactured solution process (implemented in Mathematica) for finite deformation, hyperelastic problems is presented that has been used to verify Sierra/SM for this class of problems. The process "manufactures a problem" given either a displacement field or motion map. Four test problems are examined; two provide sanity checks on symbolically calculated results, and two provide code verification results. While simple solutions from linear elasticity can be used to "seed" a manufactured solution, one from beam theory is shown to yield a n unexpectedly complex boundary value problem. The last problem combines two approaches that can significantly simplify the solution of some hypoelasticity problems, which require integration over time; a semi-manufactured approach is proposed and examined that yields the same observed rates of convergence as the classical approach at significantly reduced analytical effort.

42 ENGINEERING↗

Enhanced activity and stability of MgO-promoted Ni/Al 2 O 3 catalyst for dry reforming of methane: Role of MgO

Highly dispersed nickel nanoparticles (NPs) were deposited on Al 2 O 3 NPs by atomic layer deposition (ALD). Various amounts of MgO were loaded on Ni/Al 2 O 3 catalysts by the incipient wetness (IW) method for dry reforming of methane. Fresh and used catalysts were systematically characterized to reveal the effects of MgO on the catalytic performance. MgO was found to increase the basic amount and basic strength of catalyst surfaces, which provided additional surface oxygen species and assisted the adsorption and activation of CO 2 . Although the formation of NiO-MgO solid solution, during the calcination of incipient wetness, did not improve the overall reducibility, the Ni NPs from NiO-MgO solid solution after reduction formed an intimate interaction with MgO, which could inhibit Ni NPs from sintering and provide sufficient metal-support interface for CO 2 activation. The MgO-promoted Ni/Al 2 O 3 reached a methane reforming rate of 1780 L CH4 g Ni -1 h -1 at 850 °C, which is 26% more than that of the pristine Ni/Al 2 O 3 . Finally, the higher CO 2 activity enhanced the oxidation rate of the surface carbon generated from side-reactions, thereby resulting in a higher reforming rate and inhibiting coke formation, especially the detrimental graphitic encapsulating carbon on the active nickel surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Novel Ferritic-Martensitic Steels with Superior Creep Properties for Power Plant Applications

A creep resistant martensitic steel, CPJ-7, was developed with an operating temperature approaching 650°C. Subsequently, another creep resistant martensitic steel, JMP, was designed with the potential to operate at, or slightly above, 650°C. This report describes the development of these alloys from early iterations of CPJ steels to the final CPJ-7 formulation as well as the more heat resistant JMP steel formulation. The design originated from computational modeling for phase stability and precipitate strengthening using fifteen constituent elements. Approximately forty heats of CPJ and ten of JMP, each weighing ~7 kg, were vacuum induction melted. A computationally optimized heat treatment schedule was developed to homogenize the ingots prior to hot forging and rolling prior to final normalization and tempering. Overall, wrought and cast versions of CPJ-7 present superior creep properties when compared to wrought and cast versions of COST alloys for steam turbine and wrought and cast versions of P91/92 for boiler applications. For instance, the Larson Miller Parameter curve for CPJ-7 at 650°C almost coincides with that of COST E at 620°C. The prolonged creep life was attributed to slowing down the process of the destabilization of the MX and M 23 C 6 precipitates at 650°C. On the other hand, the cast version of CPJ-7 also revealed superior mechanical performance, well above commercially available cast 9% Cr martensitic steel or derivatives, especially for creep life at 650°C. The casting process employed slow cooling to simulate the conditions of a thick wall full-size steam turbine casing but utilized a separate homogenization step prior to final normalization and tempering. To advance the development of CPJ-7 for commercial applications, a process was used to scale up the production of the alloy using vacuum induction melting (VIM) and electroslag remelting (ESR), which underlined the importance of melt processing control of intentionally designed minor and trace elements in these advanced alloys. Following the work on CPJ-7, the JMP steels were designed with higher Co for increased solid solution strengthening, Si for oxidation resistance and increased W (with low Mo content) for matrix strength and stability as well as solid solution strengthening. The JMP steels showed increases in creep life compared to CPJ-7 between 118 to 150% at 650°C for testing at various stresses between 138 MPa and 207 MPa. On a Larson-Miller plot, the performance of the JMP steels surpasses that of state-of-the-art MARBN and other MARBN-type steels. The influence of various elements within the composition of the alloys on the microstructure and mechanical properties are discussed. This report presents approximately 420,000 h of in-house creep testing, the equivalent of almost 50 years of cumulative creep tests.

36 MATERIALS SCIENCE↗

Potential Dependent Mn Oxidation and Its Role in Passivation of Ni 38 Fe 20 Cr 22 Mn 10 Co 10 Multi-Principal Element Alloy Using Multi-Element Resolved Atomic Emission Spectroelectrochemistry

The identity of passivating oxides on multi-principal element alloys is of great interest as their optimization offers the potential for exceptional corrosion resistance in aqueous solutions over a broad range of potential and pH. This study focuses on a non-equiatomic Ni 38 Fe 20 Cr 22 Mn 10 Co 10 solid solution alloy and tracks the fate of each alloying element during linear sweep voltammetry, low and intermediate potential holds in the passive potential domain as well as during open circuit relaxation after anodic polarization in slightly acidified Cl − solution. Ni dissolves at all potentials investigated in this work, Fe and Co are incorporated into oxides or hydroxides in low concentrations whilst Cr and Mn are enriched at passive potentials. At low passivating potentials, Mn(II) dissolves and is incorporated in minor amounts in oxides containing large concentrations of Cr(III). Considerable enrichment in Mn(II)-species occurs relative to Cr(III) in the oxide at 0.1 V vs SCE. Electrochemical impedance spectroscopy suggests the presence of layered oxides with marginal passivation at high Mn(II) levels. The formation of these oxides depends on a combination of thermodynamic and kinetic factors as well as the sequence of passivation.

Han, Junsoo (ORCID:0000000192952954)↗

Structural Evolution and Photoluminescence Quenching across the FASnI 3– x Br x ( x = 0–3) Perovskites

One of the primary methods for band gap tuning in metal halide perovskites has been halide (I/Br) mixing. Despite widespread usage of this type of chemical substitution in perovskite photovoltaics, there is still little understanding of the structural impacts of halide alloying, with the assumption being the formation of ideal solid solutions. The FASnI 3–x Br x (x = 0–3) family of compounds provides the first example where the assumption breaks down, as the composition space is broken into two unique regimes (x = 0–2.9; x = 2.9–3) based on their average structure with the former having a 3D and the latter having an extended 3D (pseudo 0D) structure. Pair distribution function (PDF) analyses further suggest a dynamic 5s 2 lone pair expression resulting in increasing levels of off-centering of the central Sn as the Br concentration is increased. These antiferroelectric distortions indicate that even the x = 0–2.9 phase space behaves as a nonideal solid-solution on a more local scale. Solid-state NMR confirms the difference in local structure yielding greater insight into the chemical nature and local distributions of the FA + cation. In contrast to the FAPbI 3–x Br x series, a drastic photoluminescence (PL) quenching is observed with x ≥ 1.9 compounds having no observable PL. In conclusion, our detailed studies attribute this quenching to structural transitions induced by the distortions of the [SnBr 6 ] octahedra in response to stereochemically expressed lone pairs of electrons. This is confirmed through density functional theory, having a direct impact on the electronic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reinforcement of the Cube texture during recrystallization of a 1050 aluminum alloy partially recrystallized and 10% cold-rolled

In high purity Aluminum, very strong {l_brace}100{r_brace}<001> recrystallization texture is developed after 98% cold rolling and annealing at 500 Degree-Sign C. On the contrary, in Aluminum alloys of commercial purity, the Cube component hardly exceeds 30% after complete recrystallization. Parameters controlling Cube orientation development are mainly the solute dragging due to impurities in solid solution and the stored deformation energy. In the present study, besides the 85% cold rolling, two extra annealings and a slight cold rolling are introduced in the processing route to increase the Cube volume fraction. The Cube development was analyzed by X-ray diffraction and Electron BackScattered Diffraction (EBSD). The nucleation and growth mechanisms responsible for the large Cube growth were investigated using FEG/EBSD in-situ heating experiments. Continuous recrystallization was observed in Cube oriented grains and competed with SIBM (Strain Induced Boundary Migration) mechanism. This latter was favored by the stored energy gap introduced during the additional cold-rolling between the Cube grains and their neighbors. Finally, a Cube volume fraction of 65% was reached after final recrystallization. - Highlights: Black-Right-Pointing-Pointer EBSD in-situ heating experiments of aluminum alloy of commercial purity. Black-Right-Pointing-Pointer A 10% cold-rolling after a partial recrystallization improved Cube nucleation and growth. Black-Right-Pointing-Pointer Annealing before cold-rolling limited the solute drag effect and permitted a large Cube growth. Black-Right-Pointing-Pointer Cube development is enhanced by continuous recrystallization of Cube sub-grains. Black-Right-Pointing-Pointer The preferential Cube growth occurs by SIBM of small Cube grains.

36 MATERIALS SCIENCE↗

Simulating the mechanisms of serrated flow in interstitial alloys with atomic resolution over diffusive timescales

Abstract The Portevin-Le Chatelier (PLC) effect is a phenomenon by which plastic slip in metallic materials becomes unstable, resulting in jerky flow and the onset of inhomogeneous deformation. The PLC effect is thought to be fundamentally caused by the dynamic interplay between dislocations and solute atoms. However, this interplay is almost always inaccessible experimentally due to the extremely fine length and time scales over which it occurs. In this paper, simulations of jerky flow in W-O interstitial solid solutions reveal three dynamic regimes emerging from the simulated strain rate-temperature space: one resembling standard solid solution strengthening, another one mimicking solute cloud formation, and a third one where dislocation/solute coevolution leads to jerky flow as a precursor of dynamic strain aging. The simulations are carried out in a stochastic framework that naturally captures rare events in a rigorous manner, providing atomistic resolution over diffusive time scales using no adjustable parameters.

36 MATERIALS SCIENCE↗

Synthesis of Pyridine– and Pyrazine–BF 3 Complexes and Their Characterization in Solution and Solid State

Following the discovery of the redox-active 1,4- bis-BF 3 -quinoxaline complex, we undertook a structure- activity study with the objective to understand the active nature of the quinoxaline complex. Through systematic synthesis and characterization, we have compared complexes prepared from pyridine and pyrazine derivatives, as heterocyclic core analogues. This paper reports the structural requirements that give rise to the electrochemical features of the 1,4-bis-BF 3 -quinoxaline adduct. Using solution and solidstate NMR spectroscopy, the role of aromatic ring fusion and nitrogen incorporation in bonding and electronics was elucidated. We establish the boron atom location and its interaction with its environment from 1D and 2D solution NMR, X-ray diffraction analysis, and 11B solid-state NMR experiments. Crystallographic analysis of single crystals helped to correlate the boron geometry with 11B quadrupolar coupling constant (CQ) and asymmetry parameter (ηQ), extracted from 11B solid-state NMR spectra. Additionally, computations based on density functional theory were performed to predict electrochemical behavior of the BF 3 -heteroaromatic complexes. We then experimentally measured electrochemical potential using cyclic voltammetry and found that the redox potentials and CQ values are similarly affected by electronic changes in the complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A multivariate library of zirconia metal–organic frameworks with dissolved p -nitroaniline dipoles and concentration-dependent optical and dielectric response

In this work, we show how the combination of soluble non-polar and polar links allows for the preparation of multivariate metal–organic frameworks (MTV MOFs) that exhibit dipolar solid-solution behavior. We prepared a library of PIZOF-2 MOFs with varied concentrations of p -nitroaniline (PNA)-containing moiety embedded within the MTV links. This library forms a partial solid solution up to 30 mol% with input/output composition ratio of 0.536 ± 0.018. MOFs with x > 5 mol% PNA show concentration-dependent hypsochromic dipole–dipole coupling (H-coupling) in the solid-state UV-visible spectra. The MTV library also exhibits a dielectric relaxation event in the broadband dielectric spectra with activation enthalpies and entropies that vary with temperature and PNA content and follow linear Meyer–Neldel compensation relations.

Langlois, Kyle R. [Univ. of Central Florida, Orlan↗

Reduction and Simultaneous Removal of 99 Tc and Cr by Fe(OH) 2 (s) Mineral Transformation

Technetium (Tc) remains a priority remediation concern due to persistent challenges, including rapid re-oxidation of immobilized Tc, and competing contaminants, e.g. Cr(VI), that inhibit targeted Tc reduction and incorporation into stable mineral phases. Here Fe(OH) 2 (s) is investigated as a comprehensive solution for overcoming these challenges, by serving as both the reductant, (Fe(II)), and immobilization agent to form Tc-incorporated magnetite (Fe 3 O 4 ). Trace metal analysis suggests removal of Tc(VII) and Cr(VI) from solution occurs simultaneously; however, complete removal and reduction of Cr(VI) is achieved earlier than the removal/reduction of co-mingled Tc(VII). Bulk oxidation state analysis of the magnetite solid phase by XANES confirms that the majority of Tc is Tc(IV), which is corroborated by XPS. Furthermore, EXAFS results show successful Tc(IV) incorporation into magnetite octahedral sites without additional substitution of Cr or Tc into neighboring Fe octahedral sites. XPS analysis of Cr confirms reduction to Cr(III) and the formation of a Cr-incorporated spinel, Cr2O 3 , and Cr(OH)3 phases. Spinel (modeled as Fe 3 O 4 ), goethite, and feroxyhyte are detected in all reacted solid phase samples analyzed by XRD, where Tc(IV) incorporation has little effect on the spinel lattice structure. In the presence of Cr(III) a spinel phase along the magnetite-chromite (Fe 3 O 4 -FeCr 2 O 4 ) solid-solution line is formed.

Environmental Molecular Sciences Laboratory↗

Quantum-mechanical evaluation of Np-incorporation into studtite

Radionuclide incorporation into the alteration products of corroded UO 2 in used nuclear fuel may control the release and mobility of key radionuclides, such as the very long-lived minor actinide, 237 Np (τ ½ = 2.1 Ma). Studtite, [UO 2 (O 2 )(H 2 O) 2 ](H 2 O) 2 , may form in the presence of peroxide produced by radiolysis of water in contact with the spent fuel. Experiments have indicated that the studtite structure can incorporate Np; however, due to the low concentrations in the solid, the incorporation mechanism could not be determined. In this study, density functional theory is used to calculate an optimized structure, determine the electronic density of states, and calculate the energetics of the incorporation of Np 6+ vs. Np 5+ +H + into the studtite structure. The definition of the source/sink phase (reference phase) for the cations involved in the incorporation process greatly affects the final incorporation energy. The incorporation energy of Np into studtite based on the 4 + oxide reference phases (e.g., source/sink = NpO 2 /UO 2 ) results in lower incorporation energies (-0.07 and 0.63 eV for Np 6+ and Np 5+ incorporation, respectively) than the incorporation energy calculated using higher-oxide reference phases (e.g., Np 2 O 5 /UO 3 ), where the incorporation energies for Np 5+ and Np 5+ into studtite are 0.42 and 1.12 eV, respectively. In addition, Np6+-incorporation into studtite is energetically more favorable than Np 5+ -incorporation as assessed from the lower incorporation energy. Estimates of the solid-solution behavior from a combination of quantum-mechanical calculations and Monte-Carlo simulations indicate that the Np 6+ - and U 6+ -studtite solid solution is completely miscible at room temperature with respect to a hypothetical Np 6+ -studtite structure. The Np-studtite structure was calculated to be stable with respect to the corresponding oxides, but its formation may be kinetically hindered. Knowledge of the electronic structure provides insight into Np-bonding in the studtite structure. The Np 5f orbitals are within the band gap of studtite, which results in the narrow band gap of Np-incorporated studtite (1.09 eV), as compared with the band gap of studtite alone (2.29 eV).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Analcime-wairakite formation during experimental cement-bentonite alteration at 200–300 °C

Engineered barrier system materials in nuclear waste repositories may undergo hydrothermal alteration in response to groundwater saturation and heating events over their long operational timescales. Hydrothermal interactions between engineered materials (e.g., bentonite buffers, cements, waste canister materials) and the host rock environment may drive alteration processes that affect the advantageous properties of some barrier materials. However, such alteration will also promote the formation of zeolites, hydrothermally formed minerals that may themselves act to isolate radionuclides. Understanding the environmental conditions that control radionuclide-sorbing properties of zeolites, such as Si/Al ratio or Na content, will be valuable for assessing the changing properties of engineered barrier materials in the case of an in situ heating event. Here, we present experimental work characterizing the formation of zeolites during hydrothermal interactions between generic clay and cement barrier materials, with a focus on the analcime-wairakite zeolite series, which has known radionuclide sorption and exchange properties. We present the results of hydrothermal experiments combining uncured ordinary Portland cement powder with steel and Wyoming bentonite in the presence of Opalinus clay and a synthesized Opalinus clay groundwater to simulate water-saturated conditions in an argillaceous rock repository. The experiments were conducted isothermally at 200 or 300 °C for 8 to 24 weeks. In contrast to analogous studies that did not include cement reactants, we observed the formation of analcime-group minerals in all experiments. The addition of cement resulted in lower Si/Al ratios in the zeolites compared to similar studies that did not include cement. The presence of cement as a reactant was interpreted to promote analcime formation at 200 °C. At 300 °C, we observed higher calcium and silica concentrations in the aqueous solutions as well as increased wairakite formation and decreased analcime formation compared to the experiments at 200 °C. These results show a fully realized analcime-wairakite solid solution that falls between Si/Al = 2 (ideal) and a trend of analcime minerals that have increasing Si/Al ratios with increasing Na/(Na+Ca). Our results show predictable relationships between the Si/Al ratio and the analcime-wairakite content under hydrothermal conditions and illustrate that repository material interactions may promote the formation of zeolites in the analcime-wairakite solid-solution series during heating events in the subsurface.

58 GEOSCIENCES↗

Defect control in the Heisenberg-Kitaev candidate material NaRuO 2

The combination of geometric frustration, extended hopping, spin-orbit coupling, and a disordered magnetic ground state make NaRuO 2 an attractive Heisenberg-Kitaev candidate material. Historically, NaRuO 2 has been a challenging material to produce, even in polycrystalline form. Here we present synthetic efforts that identify a propensity for Na Ru defects to form in NaRuO 2 , revealing a full solid-solution between NaRuO 2 and disordered Na 2 RuO 3 . We report the synthesis of alloys along the Na 3+x Ru 3–x O 6 solid solution and characterize changes in the bulk magnetization and electron transport as a function of Na loading. Furthermore, our results highlight the importance of stoichiometry control in NaRuO 2 when investigating and interpreting this material’s physical properties.

36 MATERIALS SCIENCE↗

Alternative Donor--Acceptor Stacks from Crown Ethers and Naphthalene Diimide Derivatives: Rapid, Selective Formation from Solution and Solid State Grinding

Self assembling {pi}-conjugated molecules into ordered structures are of increasing interest in the field of organic electronics. One particular example is charge transfer complexes containing columnar alternative donor-acceptor (ADA) stacks, where neutral and ionic ground states can be readily tuned to modulate electrical, optical, and ferroelectrical properties. Aromatic-aromatic and charge transfer interactions have been the leading driving forces in assisting the self-assembly of ADA stacks. Various folding structures containing ADA stacks were assembled in solution with the aid of solvophobic or ion-binding interactions. Meanwhile, examples of solid ADA stacks, which are more appealing for practical use in devices, were obtained from cocrystalization of binary components or mesophase assembly of liquid crystals in bulk blends. Regardless of these examples, faster and more controllable approaches towards precise supramolecular order in the solid state are still highly desirable.

36 MATERIALS SCIENCE↗