Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid phase processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Grain Boundary Engineering for Achieving High Thermoelectric Performance in n-Type Skutterudites

Grain or phase boundaries play a critical role in the carrier and phonon transport in bulk thermoelectric materials. Previous investigations about controlling boundaries primarily focused on the reducing grain size or forming nanoinclusions. Herein, liquid phase compaction method is first used to fabricate the Yb–filled CoSb 3 with excess Sb content, which shows the typical feature of low–angle grain boundaries with dense dislocation arrays. Seebeck coefficients show a dramatic increase via energy filtering effect through dislocation arrays with little deterioration on the carrier mobility, which significantly enhances the power factor over a broad temperature range with a high room–temperature value around 47 μW cm –2 K –1 . Simultaneously, the lattice thermal conductivity could be further suppressed via scattering phonons via dense dislocation scattering. As a result, the highest average figure of merit ZT of ≈1.08 from 300 to 850 K could be realized, comparable to the best reported result of single or triple–filled Skutterudites. Furthermore, this work clearly points out that low–angle grain boundaries fabricated by liquid phase compaction method could concurrently optimize the electrical and thermal transport properties leading to an obvious enhancement of both power factor and ZT .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Why are Lead Iodide‐Based Perovskite Precursor Inks Yellow?

A challenge faced by metal halide perovskite (MHP) photovoltaics is scaling up solution deposition processes to realize rapid and inexpensive manufacturing. The challenge lies in completely understanding and controlling solution speciation, nucleation, and self-assembly of iodoplumbate complexes during solvent evaporation as the liquid transforms into gels and solids. An accurate description of solution species, at all points in the transformation, is a prerequisite to design robust and reliable processes. Here, in this study, the common assumption that initial monoplumbate solution species typically invoked (e.g., [PbI 6 ] 4− ) are certainly not the origin of optical absorbance at >400 nm wavelengths is disproved, as are many large particles of common “intermediate” iodoplumbate phases with face- or edge-sharing connectivity. Instead, a new perspective is offered, involving (partially) corner-sharing iodo(poly)plumbates (>1 Pb 2+ per complex) that experience highly dynamic chemical environments. It is outlined how the MHP field would benefit by elucidating these phenomena. Future work is required to determine the size and kinetic behavior of polyplumbate species, and contextualize these findings in relation to broader trends in materials chemistry beyond MHPs. Ultimately, a complete explanation for the solution speciation, optical absorbance signatures, and the color of MHP precursor inks remains an open challenge to the community.

14 SOLAR ENERGY↗
DOE OSTI2022

Insights into the Enhanced Reversibility of Graphite Anode Upon Fast Charging Through Li Reservoir

Increasing the charging rate and reducing the charging time for Li-ion batteries are crucial to realize the mainstream of electric vehicles. However, it is formidable to avoid the Li plating on graphite anode upon fast charging. Despite the tremendous progress in Li detection techniques, the fundamental mechanism of Li plating and its chemical/electrochemical responses upon cycling still remains elusive. Herein, we present a comprehensive electrochemical method to investigate the fast charging behavior of graphite electrode. A detailed analysis is directed toward understanding the changes in phase, composition, and morphology of the fast-charged graphite. By applying a resting process, we scrutinize the further reactions of the plated Li, which readily transforms into irreversible (dead) Li. We further develop a modified graphite electrode with a thin Ag coating as the Li reservoir. The plated Li can be "absorbed" by the Ag layer to form the Li-Ag solid solution that suppresses the formation of dead Li and provides structural stability, thus promoting the further lithiation of graphite and enhancing the reversibility. Here this work not only provides additional insights into the fast charging behavior of graphite electrode but also demonstrates a potential strategy to improve the fast charging performance of graphite anode.

25 ENERGY STORAGE↗
DOE OSTI2022

Design of crack-free laser additive manufactured Inconel 939 alloy driven by computational thermodynamics method

Abstract This paper examined the effect of Si addition on the cracking resistance of Inconel 939 alloy after laser additive manufacturing (AM) process. With the help of CALculation of PHAse Diagrams (CALPHAD) software Thermo-Calc, the amounts of specific elements (C, B, and Zr) in liquid phase during solidification, cracking susceptibility coefficients (CSC) and cracking criterion based on $$\left| {{\text{d}}T/{\text{d}}f_{{\text{s}}}^{1/2} } \right|$$ d T / d f s 1 / 2 values ( T : solidification temperature, f s : mass fraction of solid during solidification) were evaluated as the indicators for composition optimization. It was found that CSC together with $$\left| {{\text{d}}T/{\text{d}}f_{{\text{s}}}^{1/2} } \right|$$ d T / d f s 1 / 2 values provided a better prediction for cracking resistance. Graphical abstract

Zeng, Congyuan (ORCID:0000000214764277)↗
DOE OSTI2019

Conversion of Coal Wastes and Coal Plus Other Opportunity Fuel Mixtures, Such as Coal Plus Municipal Solids, to Produce Electricity and/or Liquid Fuels

For the foreseeable future, the Nation’s energy demand will continue to come largely from indigenous fossil energy resources and hydrocarbon fuels. Specifically waste coal plus other opportunity fuels need to be utilized as a feedstock to eliminate a waste stream and optimized to maximize energy yield and cleanly minimize pollutant emissions. Modular equipment is needed for installation in coal preparation locations, military installations, and research park facilities. Thermal decomposition of coal, biomass, and mixed solid waste (MSW) have been shown to reduce a waste stream while providing liquid and gaseous fuel products with low pollutant emissions. However, thermal decomposition processes have several challenges associated with preprocessing biomass and MSW, feeding and conveying material into the reactor, and post processing of syngas to remove undesirable products while upgrading to increase yield of high value products. Increasing total energy output from power plants by utilizing biomass and mixed wastes ultimately lowers energy costs, harmful environmental impacts of emissions, and has significant impacts on the energy security and sustainability of the U.S. economy. Entrained flow gasifiers (EFGs) produce very little CH4 and a wide range of H2/CO ratios (0.5–2.0) but are limited in their ability to effectively feed large biomass or MSW particles into the reactor. A solution to the feeding problems is to use pyrolysis torrefaction (PT) for conversion of waste materials to create a feedstock similar to coal and capable of grinding down and mixing with the coal feed. Mainstream experimentally explored reaction pathways for the conversion of coal waste plus municipal solids (CWPMS) and demonstrated a bench-scale reactor used for torrefaction of the municipal solid waste (MSW) to create a coal-like feed for blending with the coal waste. The material was processed in a pilot-scale EFG to determine product yield and emissions with CWPMS fuels, as well as the ash content and slagging properties of these feedstocks. The PT-EFG system was experimentally validated, where emissions and yield data were used to develop a high-fidelity process model and economic analysis. The following was accomplished in the Phase I: Determined optimal torrefaction process conditions for MSW and biomass through TGA; maximized heating value of fuel while maximizing final mass of torrefied product Demonstrated torrefaction of MSW and biomass feedstocks at 334°C, pulverized to uniform 74 µm particle size, and processed into coal-like feedstocks Demonstrated 8 lb/h pilot-scale EFG using MSW and biomass blends with waste coal; demonstrated 100% biomass in EFG Determined major effects of MSW torrefaction and co-gasifying high-ash coal waste-MSW blends have on pilot-scale EFG Demonstrated blending low-ash, low-sulfur torrefied biomass with high-ash waste bituminous and anthracite refuse coals generates a higher quality syngas compared to syngas from high-ash waste coals Demonstrated a high carbon conversion (> 99.5%) and syngas with 29.47% H2 content, and 0% CH4 content; greater water–gas shift occurs in EFG than predicted by equilibrium ASPEN Plus model Blended lower-ash, high-alkali biomass MSW to lower slag viscosities of the high-ash coal refuse sufficiently for better slag flow compared to feeding the high-ash coal Used low-sulfur biomass to greatly reduce the EFG syngas H2S concentrations and produce non-leachable slag and quench water with very little organic and trace metal contamination Developed a process model and TEA showing the modular PT EFG is cost competitive to existing power plants with the advantage of using low- or negative-value feedstocks such as waste coal stockpiles and non-landfilled MSW; providing a large incentive to implement an economical PT-EFG process

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Fundamental Relationship of Microstructure and Ionic Conductivity of Amorphous LLTO as Solid Electrolyte Material

All-solid-state Li-ion batteries (ASSLiB) attracted lots of attention mainly due to their higher safety compared with commercial Li-ion batteries. The research of solid electrolyte is critical for the development of ASSLiB, and among all the candidates of solid electrolyte materials, amorphous Lithium Lanthanum Titanate Oxide (LLTO) is promising because of its outstanding electrochemical stability up to 12V. However, the fundamental relationship among the ionic conductivity, microstructure, and mechanism of Li ion transport is still unrevealed. In this study, both amorphous LLTO thin film and LLTO powder were successfully prepared by sol-gel process. In order to determine the relationship between microstructure and ionic conductivity, various annealing time at 500°C were applied. This work shows that the ionic conductivity increases from 2.32 × 10 -8 S/cm to 9.01 × 10 -6 S/cm with the annealing time before LLTO starts to crystallize and decreases back to ~1.6 × 10 -9 S/cm after the formation of crystal phase. The absolute value of difference is close to 3 orders of magnitude. Furthermore, the morphology of the thin film changes accordingly, solvent evaporation, surface refinement and crystallization phases would occur sequentially, and this indicates that there is an optimal synthesis condition for the LLTO film. However, the changes of structure, morphology and ionic conductivity does not affect activation energy. This will help researchers to find optimized synthesis condition of amorphous LLTO and potentially search for and design other solid electrolyte materials.

25 ENERGY STORAGE↗
DOE OSTI2025

Effect of Zr and Sc additions on coarsening- and creep resistance of AlSi10Mg fabricated by laser powder bed fusion

Microstructure and creep properties are studied in a eutectic AlSi10Mg alloy modified with Zr and Sc additions (Al-9.8Si-0.32Mg-0.70Zr-0.23Sc, wt%) manufactured through laser powder-bed fusion (L-PBF). Three types of Zr/Sc-bearing powders - elemental, master-alloy, and pre-alloyed - are employed in the fabrication process, with the pre-alloyed powders providing the highest incorporation of Zr and Sc in the Al matrix. Here, the as-printed alloy exhibits a fine cellular Al-Si eutectic structure which fragments and coarsens into micron-sized Si particles during aging at 300 ºC, leading to a steady drop in alloy microhardness between 0.1 and 1000 h. Coarsening of the eutectic Si phase during aging is not measurably affected by Zr and Sc in solid solution, which precipitate during aging and increases strength, compensating weakening from Si coarsening between 1 and 200 h at 300 ºC. Atom-probe analysis in the peak-aged condition (96 h/300 °C) confirms the presence of Al 3 (Sc,Zr) secondary nano-precipitates with an average radius of 1.0 nm and some Si solubility. Micron-sized grains are present throughout the alloy, with ultra-fine-grained regions at the melt pool boundaries, neither of which coarsen during long-term aging at 300 ºC. Under creep conditions at 300 °C, the Zr/Sc-bearing alloy with Al 3 (Sc,Zr) nano-precipitates exhibits power-law behavior, with a high apparent stress exponent (n a = 9) and a high threshold stress (σ th = 43 MPa), exhibiting nearly double the strength of a Zr/Sc-free AlSi10Mg control alloy (σ th = 22 MPa).

36 MATERIALS SCIENCE↗
DOE OSTI2016

Polymer ligand–induced autonomous sorting and reversible phase separation in binary particle blends

The tethering of ligands to nanoparticles has emerged as an important strategy to control interactions and organization in particle assembly structures. Here, we demonstrate that ligand interactions in mixtures of polymer-tethered nanoparticles (which are modified with distinct types of polymer chains) can impart upper or lower critical solution temperature (UCST/LCST)–type phase behavior on binary particle mixtures in analogy to the phase behavior of the corresponding linear polymer blends. Therefore, cooling (or heating) of polymer-tethered particle blends with appropriate architecture to temperatures below (or above) the UCST (or LCST) results in the organization of the individual particle constituents into monotype microdomain structures. The shape (bicontinuous or island-type) and lengthscale of particle microdomains can be tuned by variation of the composition and thermal process conditions. Thermal cycling of LCST particle brush blends through the critical temperature enables the reversible growth and dissolution of monoparticle domain structures. The ability to autonomously and reversibly organize multicomponent particle mixtures into monotype microdomain structures could enable transformative advances in the high-throughput fabrication of solid films with tailored and mutable structures and properties that play an important role in a range of nanoparticle-based material technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Three-Dimensional Solid-State Lithium-Ion Batteries Fabricated by Conformal Vapor-Phase Chemistry

Three-dimensional thin-film solid-state batteries (3D TSSB) were proposed by Long et al. in 2004 as a structure-based approach to simultaneously increase energy and power densities. Here, we report experimental realization of fully conformal 3D TSSBs, demonstrating the simultaneous power-and-energy benefits of 3D structuring. All active battery components—electrodes, solid electrolyte, and current collectors—were deposited by atomic layer deposition (ALD) onto standard CMOS processable silicon wafers microfabricated to form arrays of deep pores with aspect ratios up to approximately 10. The cells utilize an electrochemically prelithiated LiV 2 O 5 cathode, a very thin (40–100 nm) Li 2 PO 2 N solid electrolyte, and a SnNx anode. The fabrication process occurs entirely at or below 250 °C, promising compatibility with a variety of substrates as well as integrated circuits. The multilayer battery structure enabled all-ALD solid-state cells to deliver 37 μAh/cm 2 ·μm (normalized to cathode thickness) with only 0.02% per-cycle capacity loss. Conformal fabrication of full cells over 3D substrates increased the areal discharge capacity by an order of magnitude while simulteneously improving power performance, a trend consistent with a finite element model. Furthermore, this work shows that the exceptional conformality of ALD, combined with conventional semiconductor fabrication methods, provides an avenue for the successful realization of long-sought 3D TSSBs which provide power performance scaling in regimes inaccessible to planar form factor cells.

25 ENERGY STORAGE↗
DOE OSTI2022

Minimum feature size control in level set topology optimization via density fields

A level set topology optimization approach that uses an auxiliary density field to nucleate holes during the optimization process and achieves minimum feature size control in optimized designs is explored. The level set field determines the solid-void interface and the density field describes the distribution of a fictitious porous material using the solid isotropic material with penalization. These fields are governed by two sets of independent optimization variables which are initially coupled using a penalty for hole nucleation. The strength of the density field penalization and projection is gradually increased during the optimization process to promote a 0-1 density distribution. In addition, a second penalty regulates the evolution of the density field in the void phase. The treatment of the density field combined with the second penalty mitigate the appearance of small design features. The minimum feature size of optimized designs is controlled by the radius of the linear filter applied to the density optimization variables. The structural response is predicted by the extended finite element method, the sensitivities by the adjoint method, and the optimization variables are updated by a gradient-based optimization algorithm. Numerical examples investigate the robustness of this approach with respect to algorithmic parameters and mesh refinement. The results show the applicability of the combined density level set topology optimization approach for both optimal hole nucleation and for minimum feature size control in 2D and 3D. This comes, however, at the cost of a more complex problem formulation and additional computational cost due to an increased number of optimization variables.

42 ENGINEERING↗
DOE OSTI2022

Accelerated carbonation and structural transformation of blast furnace slag by mechanochemical alkali-activation

Alternative cements and production routes are necessary to offset the considerable global CO 2 emissions of Portland cement production. The combination of alkali-activation and mechanochemical milling in a CO 2 rich atmosphere is a promising green direction for synthesizing cementitious material as it upcycles hazardous material (slag) while capturing wt% of CO 2 during synthesis. We investigate the resulting structural transformations incurred during synthesis and hydration using a suite of characterization techniques including solid-state 27 Al, 29 Si, and 13 C NMR. The local aluminosilicate network structure of the processed clinker is best described by a melilite-type structure. Upon hydration, the network polymerizes to form a calcium, sodium aluminosilicate hydrate gel. The synthesis route also creates various metastable carbonates and bicarbonates from captured CO 2 and alkali-additives that transform into stable carbonate phases like calcite, aragonite, and gaylussite, after hydration. These findings indicate accelerated carbonation reactions occur during clinker production and demonstrates novelty as a green cement technology.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Epsilon Metal Waste Form for Immobilization of Noble Metals from Used Nuclear Fuel

Epsilon metal (ε-metal), an alloy of Mo, Pd, Rh, Ru, and Tc, is being developed as a waste form to treat and immobilize the undissolved solids and dissolved noble metals from aqueous reprocessing of commercial used nuclear fuel. Epsilon metal is an attractive waste form for several reasons: increased durability relative to borosilicate glass, it can be fabricated without additives (100% waste loading), and in addition it also benefits borosilicate glass waste loading by eliminating noble metals from the glass and thus the processing problems related there insolubility in glass. This work focused on the processing aspects of the epsilon metal waste form development. Epsilon metal is comprised of refractory metals resulting in high reaction temperatures to form the alloy, expected to be 1500 - 2000°C making it a non-trivial phase to fabricate by traditional methods. Three commercially available advanced technologies were identified: spark-plasma sintering, microwave sintering, and hot isostatic pressing, and investigated as potential methods to fabricate this waste form. Results of these investigations are reported and compared in terms of bulk density, phase assemblage (X-ray diffraction and elemental analysis), and microstructure (scanning electron microscopy).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Mechanisms of Three-Dimensional Solid-Phase Epitaxial Crystallization of Strontium Titanate

Strontium titanate (SrTiO 3 , STO) is a complex metal oxide with a cubic perovskite crystal structure. Due to its easily described and understood crystal structure in the cubic phase, STO is an ideal model system for exploring the mechanistic details of solid-phase epitaxy (SPE) in complex oxides. SPE is a crystallization approach that aims to guide crystal growth at low homologous temperatures to achieve targeted microstructures. Beyond planar thin films, SPE can also exploit the addition of a chemically inert, noncrystallizing, amorphous obstacle in the path of crystallization to generate complex three-dimensional structures. The introduction of this mask fundamentally alters the SPE process, inducing a transition from two- to three-dimensional geometries and from vertical to lateral crystal growth under the influence of the crystal/mask/amorphous boundary. Using a combination of molecular dynamics simulations and experiments, we identify several unique phenomena in the nanoscale growth behaviors in both conventional (unmasked) and masked SPE. Examining conventional SPE of STO, we find that crystallization at the interface is strongly correlated to, and potentially driven by, density fluctuations in the region of the amorphous STO near the crystalline/amorphous interface with a strong facet dependence. In the masked case, we find that the crystalline growth front becomes nonplanar near contact with the mask. We also observe a minimum vertical growth requirement prior to lateral crystallization. Both phenomena depend on the relative bulk and interfacial free energies of the three-phase (crystal/mask/amorphous) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Detection of thin film phase transformations at high-pressure and high-temperature in a diamond anvil cell

Abstract Quantifying how grain size and/or deviatoric stress impact (Mg,Fe) 2 SiO 4 phase stability is critical for advancing our understanding of subduction processes and deep-focus earthquakes. Here, we demonstrate that well-resolved X-ray diffraction patterns can be obtained on nano-grained thin films within laser-heated diamond anvil cells (DACs) at hydrostatic pressures up to 24 GPa and temperatures up to 2300 K. Combined with well-established literature processes for tuning thin film grain size, biaxial stress, and substrate identity, these results suggest that DAC-loaded thin films can be useful for determining how grain size, deviatoric stress, and/or the coexistence of other phases influence high-pressure phase stability. As such, this novel DAC-loaded thin film approach may find use in a variety of earth science, planetary science, solid-state physics, and materials science applications.

Environmental Sciences & Ecology↗
DOE OSTI2024

Computational design of high-entropy rare earth aluminum garnets for advanced thermal and environmental barrier coatings

To enhance the protection of Ni-based superalloys in gas turbine engines’ high-temperature environments, it’s crucial to develop advanced thermal/environmental barrier coating (T/EBC) materials with a balanced combination of thermal and mechanical properties. This optimization is essential to safeguard against chemical and thermal challenges. Here, in this study, we harness the power of density functional theory (DFT) in conjunction with combinatorial chemistry methodologies to engineer high-performance high-entropy rare earth disilicates of the RE 3 Al 5 O 12 family (where RE denotes Y, Gd, Er, and Yb). These materials are meticulously designed to exhibit superior phase stability, a targeted coefficient of thermal expansion (CTE), low lattice thermal conductivity, and robust mechanical properties. The determination of CTE values is accomplished through phonon calculations at various volume settings within the quasi-harmonic approximation, while lattice thermal conductivities are rigorously assessed employing the Debye-Callaway model, accounting for three distinct phonon processes. Our findings highlight the remarkable attributes of the solid solution (Y 1/4 Gd 1/4 Er 1/4 Yb 1/4 ) 3 Al 5 O 12 , which displays a reduction in lattice thermal conductivity compared to its individual constituents while maintaining a favorable range of CTE values. The novel T/EBC material, distinguished by their multifaceted functionalities, are poised to use in substantial enhancements in the performance of engines.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Separating Oil-Water Mixtures Using Bump Arrays

Particle separation is an important process step across many fields. One technique being applied for separating solids such as blood components or sand particles from carrier fluids is the use of arrays of aligned posts called deterministic lateral arrays to bump particles to one side in the flow stream to enhance separation. This technique may be useful for separation of deformable particles. The ability to efficiently separate two-phase industrial (oil/water) mixtures is key for future use of valuable resources. Over 1 trillion gallons of petroleum production water could be reclaimed annually for reuse in the drought-ridden western US states. The ability to reclaim this petroleum production water may be critical for the Central High Plains (Colorado, Kansas, Oklahoma, Texas, and New Mexico). Trends in just the High Plains area already lost 20 to 25% of the irrigated farming area due to insufficient ground water storage to irrigate, and farmland losses are expected to grow to 40%. Proving this technology is key to reuse of petroleum production water for crop irrigation or to replace water from currently failing aquifers in rich agricultural lands of the Central High Plains. We conducted experiments applying mesofluidic separation for flowing two-phase (oil/water) mixtures. Experiments were conducted using oils of differing viscosities with water as the carrier fluid; separation was achieved over a range of oil-water concentrations. We describe the results of these experiments in this paper.

oil-water separation, micelle, droplet separation,↗
DOE OSTI2019

Shape regulation of high-index facet nanoparticles by dealloying

Tetrahexahedral particles (~10 to ~500 nanometers) composed of platinum (Pt), palladium, rhodium, nickel, and cobalt, as well as a library of bimetallic compositions, were synthesized on silicon wafers and on catalytic supports by a ligand-free, solid-state reaction that used trace elements [antimony (Sb), bismuth (Bi), lead, or tellurium] to stabilize high-index facets. Both simulation and experiment confirmed that this method stabilized the {210} planes. A study of the PtSb system showed that the tetrahexahedron shape resulted from the evaporative removal of Sb from the initial alloy—a shape-regulating process fundamentally different from solution-phase, ligand-dependent processes. The current density at a fixed potential for the electro-oxidation of formic acid with a commercial Pt/carbon catalyst increased by a factor of 20 after transformation with Bi into tetrahexahedral particles.

Huang, Liliang (ORCID:0000000234740846)↗
DOE OSTI2018

Radiation Chemistry Research and Capabilities at Idaho National Laboratory

Radiation chemistry research and development to support the nuclear fuel cycle is a key role of the Fuel cycle Science and Technology Division at Idaho National Laboratory. Radiation chemistry research has primarily focused on solvent extraction processed being developed to support advanced aqueous recycle of spent nuclear fuel. This research is supported through a Co-60 Gamma irradiator and a radiolysis/hydrolysis test loop developed to support evaluation of the radiation chemistry of aqueous and organic phases while intimately mixed. Recently, research has expanded, through the Center for Radiation Chemistry Research, to include other area of radiation chemistry such as in solid phase adsorption, spent nuclear fuel, radiation kinetics modeling and formic acid degradation. Research advances will be detailed along with capabilities at INL as well as other institutions with which INL collaborates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗