Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “software specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Integrated analysis capability for large space systems

The development of an integrated analysis computer program capable of performing the conceptual/preliminary structural system design analysis of large space systems is addressed. The integrated analysis capability (IAC) specifications include thermal/structural/controls integration, an emphasis on existing software and interactive graphics and I/O, a project size capability of 1 to 50 users (1 to 5 users concurrent), and the use of the FORTRAN '77 language. The advantages of the DISCOS and NASTRAN computer programs to the IAC are outlined and recommendations for other programs are made. Barriers to the development of the system arising from the interdisciplinary data flow are defined.

Vos, R. G.↗

Army/NASA small turboshaft engine digital controls research program

The emphasis of a program to conduct digital controls research for small turboshaft engines is on engine test evaluation of advanced control logic using a flexible microprocessor based digital control system designed specifically for research on advanced control logic. Control software is stored in programmable memory. New control algorithms may be stored in a floppy disk and loaded directly into memory. This feature facilitates comparative evaluation of different advanced control modes. The central processor in the digital control is an Intel 8086 16 bit microprocessor. Control software is programmed in assembly language. Software checkout is accomplished prior to engine test by connecting the digital control to a real time hybrid computer simulation of the engine. The engine currently installed in the facility has a hydromechanical control modified to allow electrohydraulic fuel metering and VG actuation by the digital control. Simulation results are presented which show that the modern control reduces the transient rotor speed droop caused by unanticipated load changes such as cyclic pitch or wind gust transients.

Sellers, J. F.↗

Simulation of Aircraft Behaviour on and Close to the Ground

A guide to the current state of the technology of simulating fixed-wing aircraft handling qualities and performance on or close to the ground is presented and pitfalls which may prevent an adequate implementation are indicated. The scope of possible applications in both aircraft design work and pilot training is considered and the requirements for mathematical model definitions and implementations are discussed. The current requirements for visual and motion systems, cockpit cueing, and software modelling are also reviewed, and illustrated with specific examples in areas of aircraft research and development studies and pilot training uses. Needs for further improvements and additional data acquisition are identified.

Barnes, A. G.↗

Guidelines for development structured FORTRAN programs

Computer programming and coding standards were compiled to serve as guidelines for the uniform writing of FORTRAN 77 programs at NASA Langley. Software development philosophy, documentation, general coding conventions, and specific FORTRAN coding constraints are discussed.

Earnest, B. M.↗

Tailoring a software production environment for a large project

A software production environment was constructed to meet the specific goals of a particular large programming project. These goals, the specific solutions as implemented, and the experiences on a project of over 100,000 lines of source code are discussed. The base development environment for this project was an ordinary PWB Unix (tm) system. Several important aspects of the development process required support not available in the existing tool set.

Levine, D. R.↗

Simulating A Factory Via Software

Software system generates simulation program from user's responses to questions. AMPS/PC system is simulation software tool designed to aid user in defining specifications of manufacturing environment and then automatically writing code for target simulation language, GPSS/PC. Domain of problems AMPS/PC simulates is that of manufacturing assembly lines with subassembly lines and manufacturing cells. Written in Turbo Pascal Version 4.

Schroer, Bernard J.↗

IRAS software analysis library

The goal of this project was to collect 'research software' written in Interactive Data Language (IDL) to support analysis of data from the Infrared Astronomical Satellite (IRAS) and make it available to the larger community. 'Research Software' describes software created by researchers and staff for a specific research goal, but lacks sufficient documentation, easy to use interfaces, and rigorous debugging. Additionally, most of the IDL/IRAS code available needed to be ported to a (largely) hardware independent new version of IDL.

Domik, Gitta↗

Advanced information processing system: Fault injection study and results

The objective of the AIPS program is to achieve a validated fault tolerant distributed computer system. The goals of the AIPS fault injection study were: (1) to present the fault injection study components addressing the AIPS validation objective; (2) to obtain feedback for fault removal from the design implementation; (3) to obtain statistical data regarding fault detection, isolation, and reconfiguration responses; and (4) to obtain data regarding the effects of faults on system performance. The parameters are described that must be varied to create a comprehensive set of fault injection tests, the subset of test cases selected, the test case measurements, and the test case execution. Both pin level hardware faults using a hardware fault injector and software injected memory mutations were used to test the system. An overview is provided of the hardware fault injector and the associated software used to carry out the experiments. Detailed specifications are given of fault and test results for the I/O Network and the AIPS Fault Tolerant Processor, respectively. The results are summarized and conclusions are given.

Burkhardt, Laura F.↗

Generating Test Templates via Automated Theorem Proving

Testing can be used during the software development process to maintain fidelity between evolving specifications, program designs, and code implementations. We use a form of specification-based testing that employs the use of an automated theorem prover to generate test templates. A similar approach was developed using a model checker on state-intensive systems. This method applies to systems with functional rather than state-based behaviors. This approach allows for the use of incomplete specifications to aid in generation of tests for potential failure cases. We illustrate the technique on the cannonical triangle testing problem and discuss its use on analysis of a spacecraft scheduling system.

Kancherla, Mani Prasad↗

Uniform Data Access Using GXD

This paper gives an overview of GXD, a framework facilitating publication and use of data from diverse data sources. GXD defines an object-oriented data model designed to represent a wide range of things including data, its metadata, resources and query results. GXD also defines a data transport language. a dialect of XML, for representing instances of the data model. This language allows for a wide range of data source implementations by supporting both the direct incorporation of data and the specification of data by various rules. The GXD software library, proto-typed in Java, includes client and server runtimes. The server runtime facilitates the generation of entities containing data encoded in the GXD transport language. The GXD client runtime interprets these entities (potentially from many data sources) to create an illusion of a globally interconnected data space, one that is independent of data source location and implementation.

Vanderbilt, Peter↗

Accelerating the Design of Space Vehicles

One of NASA's key goals is to increase the safety and reduce the cost of space transportation. Thus, a key element of NASA's new Integrated Space Transportation Plan is to develop new propulsion, structures, and operations for future generations of reusable launch vehicles (RLVs). As part of this effort to develop the next RLV, the ClCT Program's Computing, Networking, and Information Systems (CNIS) Project is developing and demonstrating collaborative software technologies that use the collective power of the NASA Grid to accelerate spacecraft design. One of these technologies, called AeroDB, automates the execution and monitoring of computational fluid dynamics (CFD) parameter studies on the NASA Grid. About the NASA Grid The NASA Grid, or Information Power Grid,. is being developed to leverage the distributed resources of NASA's many computers. instruments, simulators, and data storage systems. The goal is to use these combined resources to sdve difficult NASA challenges, such as iimulating the entire flight of a space vehicle from ascent to descent.To realize the vision of the NASA Grid, the CNIS Project is developing the software framework and protocols for building domain-specific environments and interfaces, new Grid services based on emerging industry standards, and advanced networking and computing testbeds to support new Grid-based applications such as AeroDB.

Laufenberg, Larry↗

Determining the Importance of Energy Transfer between Magnetospheric Regions via MHD Waves using Constellations of Spacecraft

This grant was focused on research in two specific areas: (1) development of new techniques and software for assimilation, analysis and visualization of data from multiple satellites making in-situ measurements; and (2) determination of the role of MHD waves in energy transport during storms and substorms. Results were obtained in both areas and presented at national meetings and in publications. The talks and papers that were supported in part or fully by this grant are listed in this paper.

Cattell, Cynthia A.↗

Triamcinolone Acetonide Selectively Inhibits Angiogenesis in Small Blood Vessels and Decreases Vessel Diameter within the Vascular Tree

The steroid triamcinolone acetonide (TA) is a potent anti-angiogenesis drug used to treat retinal vascular diseases that include diabetic retinopathy, vascular occlusions and choroidal neovascularization. To quantify the effects of TA on branching morphology within the angiogenic microvascular tree of the chorioallantoic membrane (CAM) of quail embryos. Increasing concentrations of TA (0-16 ng/ml) were applied topically on embryonic day 7 (E7) to the chorioallantoic membrane (CAM) of quail embryos cultured in Petri dishes, and incubated for an additional 24 or 48 hours until fixation. Binary (black/white) microscopic images of arterial end points were quantified by VESGEN software (for Generational Analysis of Vessel Branching) to obtain major vascular parameters that include vessel diameter (Dv), fractal dimension (Df), tortuosity (Tv) and densities of vessel area, length, number and branch point (Av, Lv, Nv and Brv). For assessment of specific changes in vascular morphology induced by TA, the VESGEN software automatically segmented the vascular tree into branching generations (G1...G10) according to changes in vessel diameter and branching. Vessel density decreased significantly up to 34% as the function of increasing concentration of TA according to Av, Lv, Brv, Nv and Df. TA selectively inhibited the growth of new, small vessels, because Lv decreased from 13.14plus or minus 0.61 cm/cm2 for controls to 8.012 plus or minus 0.82 cm/cm2 at 16 ng TA/ml in smaller branching generations (G7-G10), and for Nv from 473.83 plus or minus 29.85 cm(-)2 to 302.32 plus or minus 33.09 cm-()2. In contrast, vessel diameter (Dv) decreased throughout the vascular tree (G1-G10).

McKay, Terri L.↗

Geologic Evolution of the Martian Highlands: MTMs -20002, -20007, -25002, and -25007

As part of a continuing study to understand the relationship between valleys and highland resurfacing through geologic mapping, the authors are continuing to map seven 1:500,000-scale MTM quads in portions of the Margaritifer, Arabia, and Noachis Terrae. Results from this mapping will also help constrain the role and extent of past water in the region. The MTMs are grouped in two different areas within the region and compliment previous mapping in adjacent areas. Three western quads focus on Jones crater and the Himera, Samara, and Loire Valles systems. This abstract focuses on the four eastern quads wherein a large, ancient impact structure, Noachis basin, is flanked on its south and east by a series of valley networks. A solitary valley drains this basin and stretches north-northeast for approximately 450 km, transporting materials into Arabia Terra. Pertinent raster and vector data have been imported and registered using ESRI's ArcMap GIS software. To inspect and quantify stratigraphic relations, crater counts are being compiled in ESRI's ArcView GIS software to make use of crater counting tools specifically developed for planetary mappers. New datasets from the Mars Reconnaissance Orbiter including 4 CTX images, 31 CRISM multi-spectral pushbroom images, and 4 HiRISE images were incorporated into the project during the third year. The CRISM dataset uses summary parameters with thresholds to select targets for the high-resolution datasets. The befit for mappers is the extensive coverage and general compositional information. Results of a cursory analysis show strong mafic absorptions on the floors of Peta crater and Noachis basin. LCP absorptions occur more often than olivine, however, olivine tends to be denser than both pyroxenes. Olivine and HCP mat indicate relatively younger rocks, which is supported by the occurrence of wrinkle ridges associated with high olivine and HCP absorptions in the Peta crater and Noachis basin floors.

Fortezzo, C. M.↗

TriG: Next Generation Scalable Spaceborne GNSS Receiver

TriG is the next generation NASA scalable space GNSS Science Receiver. It will track all GNSS and additional signals (i.e. GPS, GLONASS, Galileo, Compass and Doris). Scalable 3U architecture and fully software and firmware recofigurable, enabling optimization to meet specific mission requirements. TriG GNSS EM is currently undergoing testing and is expected to complete full performance testing later this year.

Global Navigation Satellite Systems (GNSS)↗

pFUnit 3.0 Tutorial Advanced

This tutorial will introduce Fortran developers to unit-testing and test-driven development (TDD) using pFUnit. As with other unit-testing frameworks, pFUnit, simplifies the process of writing, collecting, and executing tests while providing clear diagnostic messages for failing tests. pFUnit specifically targets the development of scientific-technical software written in Fortran and includes customized features such as: assertions for multi-dimensional arrays, distributed (MPI) and thread-based (OpenMP) parallellism, and flexible parameterized tests.These sessions will include numerous examples and hands-on exercises that gradually build in complexity. Attendees are expected to have working knowledge of F90, but familiarity with object-oriented syntax in F2003 and MPI will be of benefit for the more advanced examples. By the end of the tutorial the audience should feel comfortable in applying pFUnit within their own development environment.

Test Driven using pFUnit↗

Managing Complexity in the MSL/Curiosity Entry, Descent, and Landing Flight Software and Avionics Verification and Validation Campaign

The complexity of the Mars Science Laboratory (MSL) mission presented the Entry, Descent, and Landing systems engineering team with many challenges in its Verification and Validation (V&V) campaign. This paper describes some of the logistical hurdles related to managing a complex set of requirements, test venues, test objectives, and analysis products in the implementation of a specific portion of the overall V&V program to test the interaction of flight software with the MSL avionics suite. Application-specific solutions to these problems are presented herein, which can be generalized to other space missions and to similar formidable systems engineering problems.

Stehura, Aaron↗

Relay Support for the Mars Science Laboratory Mission

The Mars Science Laboratory (MSL) mission landed the Curiosity Rover on the surface of Mars on August 6, 2012, beginning a one-Martian-year primary science mission. An international network of Mars relay orbiters, including NASA's 2001 Mars Odyssey Orbiter (ODY) and Mars Reconnaissance Orbiter (MRO), and ESA's Mars Express Orbiter (MEX), were positioned to provide critical event coverage of MSL's Entry, Descent, and Landing (EDL). The EDL communication plan took advantage of unique and complementary capabilities of each orbiter to provide robust information capture during this critical event while also providing low-latency information during the landing. Once on the surface, ODY and MRO have provided effectively all of Curiosity's data return from the Martian surface. The link from Curiosity to MRO incorporates a number of new features enabled by the Electra and Electra-Lite software-defined radios on MRO and Curiosity, respectively. Specifically, the Curiosity-MRO link has for the first time on Mars relay links utilized frequency-agile operations, data rates up to 2.048 Mb/s, suppressed carrier modulation, and a new Adaptive Data Rate algorithm in which the return link data rate is optimally varied throughout the relay pass based on the actual observed link channel characteristics. In addition to the baseline surface relay support by ODY and MRO, the MEX relay service has been verified in several successful surface relay passes, and MEX now stands ready to provide backup relay support should NASA's orbiters become unavailable for some period of time.

Telecommunications↗