Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “siting and sizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Zeolite supported Pd catalysts for the complete oxidation of methane: A critical review

This review summarizes the recent literature reports on the development of zeolite supported Pd catalysts for the complete oxidation of methane. In-depth analysis reveals that different types of zeolite framework structures, regardless of the dimensionality, pore opening structure, and channel size, have little influence on the methane oxidation activity or the on-stream stability of the supported Pd catalysts. In contrast, the Si/Al ratio of a zeolite support plays a critical role. Both the catalytic activity and the on-stream stability of a Pd/zeolite catalyst increase with the increase of the Si/Al ratio. Catalysts supported on siliceous zeolites consistently show excellent light-off activity and remarkable on-stream stability whether in a dry or wet feed. Silanol nest defect sites in a siliceous zeolite are proposed to be the anchoring sites promoting the formation and minimizing the sintering of finely dispersed Pd nanoparticles. Remaining challenges in overcoming the sulfur poisoning effect are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of temperature on the fatigue cracking mechanisms in A356 Al alloy

This work builds on our previous investigation of the room temperature fatigue cracking mechanisms of an A356 Al alloy. Here, we analyze the elevated temperature fatigue cracking mechanisms in cast and friction stir processed (FSP) A356, and contrast them with the room temperature behavior. Two sets of FSP parameters were used to modify the microstructure of the cast alloy. After heat treatment, both the FSPed microstructures exhibited severe abnormal grain growth (AGG) leading to a very wide grain size distribution (from a few microns to a few millimeters). During room temperature fatigue tests, the FSP conditions exhibited significant improvements in fatigue lives, even up to an order of magnitude. However, with increasing temperature, the difference in the performance of the FSPed and Cast microstructures decreased until, at 200 °C, all three microstructural conditions exhibited similar fatigue response. Detailed electron back scattered diffraction (EBSD) imaging of failed fatigue specimens was used to study crack behavior. At room temperature, cracks initiated at defect sites or along persistent slip bands (PSBs) and propagated transgranularly. The grain boundaries acted as barriers to crack growth. At elevated temperatures, there was a complete role reversal of the grain boundaries. Cracks initiated along grain boundaries and propagated intergranularly in all microstructures. Below, we explore this transition of the cracking mechanism in detail.

Nelaturu, Plalgun↗
DOE OSTI2025

Rapid and Temporary Deployment of Fiber-Optic Arrays to Measure Surface Chemical Explosion Series with Distributed Acoustic Sensing

Rapid and temporary distributed acoustic sensing (DAS) deployments are crucial for accurately capturing the seismic wavefield following major events, such as earthquakes, or in anticipation of known events of interest, such as chemical explosions. We provide an overview of two DAS campaigns conducted in May and October 2024 to record the seismoacoustic waves generated by two series of surface chemical explosions in New Mexico, United States, involving 1- and 10-ton trinitrotoluene-equivalent charges. In both campaigns, we deployed approximately 2 km of fiber-optic cables in a dry riverbed, about 12 km east of the explosion sites. For the October campaign, seven geophones and two anemometers were collocated with the fiber. We describe the field deployments and present preliminary results from the recorded signals. Specifically, we cross analyze the data recorded in May and October, validate the DAS data with geophone measurements, and highlight the benefits of burying fibers to reduce wind noise and improve signal-to-noise ratios. This study demonstrates the potential of DAS to record the seismoacoustic waves generated by surface chemical explosions of varying sizes at distances of approximately 10 km from the source.

58 GEOSCIENCES↗
DOE OSTI2020

Sediment Mineralogy Data Review for the Hanford Central Plateau

The compendium of Hanford site sediment mineralogy data provided in this report was initiated in 2012 to support flux mitigation technologies and real-time monitoring that could limit contaminant fluxes to the groundwater in the Central Plateau. Recent efforts in advancing spectral induced polarization as a method for monitoring contaminant transformations for active biogeochemical remedies have underscored the need for a published compendium of sediment characterization data. Although the data are primarily focused on the mineralogical composition of Hanford sediments, other soil measurements such as particle size distribution such as particle size distribution and carbon content are provided. The data have been reproduced from the original reports and are provided here for information only (FIO).

58 GEOSCIENCES↗
DOE OSTI2026

Toward scalable quantum computations of atomic nuclei

We solve the nuclear two-body and three-body bound states via quantum simulations of pionless effective field theory on a lattice in position space. While the employed lattice remains small, the usage of local Hamiltonians including two- and three-body forces ensures that the number of Pauli terms scales linearly with increasing numbers of lattice sites. We use an adaptive ansatz grown from unitary coupled cluster theory to parametrize the ground states of the deuteron and 3 He, compute their corresponding energies, and analyze the scaling of the required computational resources. Our quantum simulations reproduce exact benchmarks for 2 H and 3 He within 100 keV, requiring at most 30 layers in the ansatz and thus resulting in modest circuit depths. Additionally, we find the number of shots required to reach a given precision scales linearly in the lattice size and more mildly in the system size. Furthermore, based on the agreement with exact benchmarks and mild scaling, we conclude that this can be an efficient, scalable approach for quantum computations of nuclear ground states, particularly to prepare initial states for quantum phase estimation or other filtering algorithms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Magnetic structure of Fe 16 N 2 determined by polarized neutron diffraction on thin-film samples

Strain-free Fe 16 N 2 thin films were obtained on MgO (001) single-crystal substrates with Cr seed layers. Additionally, x-ray diffraction and transmission electron microscopy confirmed that the film is textured in all three spatial directions with crystallographic orientation determined by epitaxial constraints from the substrate. Average grain size was estimated to be in the range of tens of nanometers. Ten pieces of 40-nm-thick Fe 16 N 2 thin-film samples were stacked together for half-polarized neutron diffraction study at room temperature. A total of six reflections were usable, from which the magnetic structure of Fe 16 N 2 was determined and compared to existing models. Contrary to most electronic structure calculations, the present results suggest that the magnetic moment of Fe atoms at the 8h site is large and larger than that of the 4d site. Our results support the giant magnetization of Fe 16 N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantitative Characterization of Hyper-Local Atmospheric Greenhouse Gas Sources

Atmospheric greenhouse gas (GHG) emissions are often characterized using stationary, tower-based sensors. Ground based sensors reside in the turbulent boundary layer and are subject to intense concentration impulses from hyper-local (<100m) point sources of emissions. These high frequency spikes are often filtered out in broader emission flux studies, losing valuable information about how hyper-local sources influence receptors. In this study, we investigated how empirical atmospheric data can be used to locate and quantify a concurrently measured hyper-local point source in a dense urban setting. An eddy covariance style tower and a low-cost sensor tower were deployed in various locations around an urban, hyper-local CO2/CH4 emissions source (a continuously measured restaurant exhaust vent). A model using different processing and statistical techniques was built to examine the most effective procedures for source isolation, directional location, and emission quantification. Using excess concentrations above a minimum baseline, we identify the source using bivariate polar plots and quantify the relationship between source size, receptor distance, and statistical proxies. Furthermore, we find that varying statistical thresholds allows for identification of less influential sources which are drowned out by larger or closer sources. Finally, we show that large sources can be effectively characterized using low-cost sensors, a valuable outcome informing how networks for monitoring larger areas could be implemented. This work may provide a basis for source identification and monitoring protocols for networks that feature sensors influenced by hyper-local point sources, subject to site-specific assumptions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Prototype Courthouse Building Energy Model: Building Characteristics and Energy Simulation Results

To coordinate commercial building energy research activities, the US Department of Energy uses a suite of commercial prototype building models, which includes 16 building types and covers 80% of US commercial floorspace. Efforts are underway to expand this suite by developing prototype models for additional building types, including a courthouse. Informed by building design guides, databases, documented projects, and personal communication with courthouse design experts, a 3-story, 4-courtroom, 69,324 ft 2 building was considered as the prototype courthouse to represent an average-sized courthouse in the United States. This report documents the building and system characteristics of the prototype courthouse model combined with climate-specific and construction vintage–specific requirements for the building envelope and systems from ASHRAE Standard 90.1. The energy simulation results are presented for 4 construction vintages (2004, 2007, 2010, and 2013) and 15 ASHRAE climate zones. To verify the energy simulation results, energy use statistics of existing courthouses from different building database are also presented. Based on the simulated energy use, the site energy use intensity of the prototype courthouse ranged from 45 to 159 kBtu/ft 2 compared with the average energy use intensity of 94.7 kBtu/ft 2 for the courthouse building type in the 2012 Commercial Building Energy Consumption Survey (CBECS) Data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Tailoring Mechanical Properties of a Multi-Principle-Element Alloy by a Multi-Length-Scale Approach

A multiscale strengthening approach was employed to tailor the mechanical properties of a NiCoCr-based multi-principal element alloy (MPEA). Initially, the addition of Mo was utilized to strengthen the alloys by achieving grain size refinement, severe lattice distortion, and a reduction in stacking fault energy (SFE). Subsequently, the Suzuki segregation phenomenon was leveraged by carefully controlling stacking fault (SF) density via pre-straining and a subsequent 500°C heat treatment. Consequently, the Mo-added MPE alloys that were pre-strained and subsequently heat-treated exhibited a true yield stress of 2.3 GPa, with a corresponding fracture elongation of 12%. The Mo promotes complex SF interactions and the SFs formed during prior straining serve as sites for Suzuki segregation during subsequent heat treatment, varying the local SFE with Cr segregation, creating a roughened landscape and hindering dislocation dynamics. This multiscale strengthening approach presents a promising route for achieving desired mechanical properties in MPEAs.

mechanical properties↗
DOE OSTI2020

A Dose Assessment Model for Radioactive Waste Exposed by Gully Erosion at West Valley - 20513

The Western New York Nuclear Service Center (WNYNSC), located approximately 48 km south of Buffalo, New York, is the site of a former nuclear fuel reprocessing and radioactive waste disposal facility. Spent nuclear fuel was processed there from 1966 to 1972, leaving behind radioactive and chemical wastes in two disposal areas and a waste tank farm. Site operations also resulted in releases of radioactivity to site soils, groundwater, and to surface waters draining the site. The New York State Energy Research and Development Authority (NYSERDA) and the U.S. Department of Energy (DOE) are collaborating in a process of decision making for decommissioning those facilities remaining at the WNYNSC following the completion of Phase 1 decommissioning. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) computer model to assist the agencies in this process. The PPA Model includes a contaminant transport component focusing on the movement of contaminants within and among environmental media including groundwater and surface water transport, contaminant translocation by plants and animals, diffusion, and erosion. The model also includes evaluation of potential exposure and health effects for a Resident Farmer exposure scenario, where the Resident Farmer represents a critical group, described as that group of individuals reasonably expected to receive the greatest exposure to residual radioactivity for any applicable set of circumstances. The West Valley Site is located in the glaciated Allegheny Plateau region of western New York State. The waste reprocessing and disposal areas were constructed on a relatively fat area of plateau dissected by drainages of Buttermilk Creek, including Erdman Brook, Franks Creek, and Quarry Creek. An important aspect of the contaminant transport component of the PPA model is consideration of erosive processes such as slumping of the stream slopes and the advance of gullies from these streams. These erosion processes remove material from the plateau, growing the size of the creek valleys and making them wider and deeper. Of particular interest for the impact of erosion is radioactive waste contained in the Nuclear Regulatory Commission (NRC)-Licensed Disposal Area (NDA), the New York State-Licensed Disposal Area (SDA), and residual radiological inventory in the underground storage tanks at the Waste Tank Farm (WTF). The PPA Model is organized around geographically-defined facilities which were constructed upon the plateau, including the NDA, SDA, and WTF. Ongoing stream erosion processes will potentially transfer radioactive waste and residual inventory from these facilities to the ground surface on adjacent hillslope areas where erosion has breached the facility. Hence, it is important to evaluate the consequences of potential exposures to a Resident Farmer on the hillslopes below a breached facility. Two interrelated aspects of the dose assessment model related to hillslope exposure are discussed: 1) representation of the physical processes related to transport of radionuclides from facilities onto the hillslopes, and from the hillslopes into adjoining creeks where contaminated material migrates downstream with surface water and sediment, and; 2) adaptation of the activities associated with the Resident Farmer scenario to assess potential exposures to contamination in the hillslope areas. This discussion will cover the conceptual basis of the hillslope exposure and transport models, and also implementation in the PPA computer model. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Cu Doping Increases Capacity Retention in LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) by Altering the Potential of the Ni-Based Redox Couple and Inhibiting Particle Pulverization

To discern the influence of Cu 2+ as a dopant on both the structural and electrochemical characteristics of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), Cu 2+ (aq) was added to the coprecipitation synthesis from the constituent ions. At 5 mol % Cu 2+ , a single-phase Cu-NMC product results, evidenced by an increase in d-spacing along the [003] and [104] directions and a slight increase in the crystal volume of the R–3m hexagonal (rock-salt superstructure) lattice. XRD data and high-resolution TEM imaging support Cu 2+ doping primarily on the transition metal 3b Wyckoff sites. Here, galvanostatic cycling of Cu-NMC shows a reversible gravimetric capacity of 102 mAh/g compared to 136 mAh/g for undoped NMC. Despite the lower capacity, the discharge capacity retention of Cu-NMC is 89% after 100 cycles compared to only 70% for NMC. XPS analysis reveals that this lower capacity is due to an increase in the concentration of Ni 3+ ions at the surface, while XRD data collected at the top and bottom of charge show a smaller decrease in crystalline domain size for Cu-NMC (40.5% decrease) compared to NMC (74.7% decrease), translating to pulverization of the secondary particles.

25 ENERGY STORAGE↗
DOE OSTI2023

Massive Trajectory Data Based on Patterns of Life

Individual human location trajectory and check-in data have been the driving force for human mobility research in recent years. However, existing human mobility datasets are very limited in size and representativeness. For example, one of the largest and most commonly used datasets of individual human location trajectories, GeoLife, captures fewer than two hundred individuals. To help fill this gap, this Data and Resources paper leverages an existing data generator based on fine-grained simulation of individual human patterns of life to produce large-scale trajectory, check-in, and social network data. In this simulation, individual human agents commute between their home and work locations, visit restaurants to eat, and visit recreational sites to meet friends. We provide large datasets of months of simulated trajectories for two example regions in the United States: San Francisco and New Orleans. In addition to making the datasets available, we also provide instructions on how the simulation can be used to re-generate data, thus allowing researchers to generate the data locally without downloading prohibitively large files.

Amiri, Hossein↗
DOE OSTI2023

Integration of seismic-pressure-petrophysics inversion of continuous active-seismic monitoring data for monitoring and quantifying CO 2 plume (Final Report)

The overall objective of this project is to develop and validate an integrated package of joint seismic-pressure-petrophysics inversion (jSPPI) of continuous active-source seismic monitoring dataset capable of providing real-time monitoring of CO 2 plume during geologic carbon sequestration (GCS). The three specific developments include: (a) the methodologies for fast seismic full waveform inversion of continuous active source seismic monitoring, (CASSM) datasets for simultaneously estimating velocity and attenuation, and with data assimilation; (b) joint Bayesian petrophysical inversion of seismic models and pressure data for providing and updating CO 2 saturation models; (c) the methods using multiple datasets including (Crainfield and Frio-II borehole) synthetic, laboratory, and field CASSM datasets. The outcomes of jSPPI include (a) a workflow for processing CASSM data, (b) Bayesian inversion algorithms using CASSM data and pressure response data, and (c) integration with data assimilation algorithms for continuously updating site-specific models used for prediction and reservoir management. The validation of joint FWI will be conducted using synthetic models based on the Cranfield and Frio experiments as well as field CASSM datasets collected as part of the Frio-II pilot injection. To quantify and map the mass and distribution of CO 2 (saturation), we will jointly invert velocity and attenuation measurements from the FWI with a Bayesian approach using a rock physics model for attenuation (e.g., White’s attenuation model with two selected patch sizes (White, 1976; Dutta and Seriff, 1979)). The Bayesian inversion will be applied to each time step in the CASSM survey in an updating scheme, which integrates with an ensemble of reservoir simulations at each step. A more complete experimental validation dataset will be collected as part of a mesoscale (2-3 m) gas-CO 2 injection experiment utilizing a higher frequency version of the CASSM system developed for laboratory studies; the integrated inversion will be demonstrated using this dataset which will provide both a dense geometry as well as more precise secondary confirmation measurements (e.g. saturation) typically not available in the field. The resulting real-time map of CO 2 saturation is able to provide a deeper scientific understanding of the complex, time-varying dynamics of subsurface fluid flow migration path as well as the rapid detection of CO 2 leakage hazards.

25 ENERGY STORAGE↗
DOE OSTI2026

Volumetric Additive Manufacturing of Gradient Composition Glass

Advanced optics, such as lasers or cameras, are currently limited by geometric or compositional restrictions on the silica glass components that act as focusing or refracting lenses. Currently, these glass components must be made of one homogenous material in a range of shapes and sizes limited by a few specialized vendors. However, additional flexibility and customization of these optical components could significantly improve the performance of these devices and expand the design space available to optics engineers, as would the capability to locally change the optical properties of these glass components by changing the composition of the glass as a function of location. To this end, we have developed a method to print and process gradient composition glass, using volumetric additive manufacturing (VAM) and direct ink writing (DIW), on-site at Lawrence Livermore National Lab.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cost Efficiency of Environmental DNA as Compared to Conventional Methods for Biodiversity Monitoring Purposes at Marine Energy Sites

The installation of marine energy systems may affect marine environments, and by extension, marine fish communities. Therefore, biomonitoring is an integral part of assessing impacts on species. Environmental DNA (eDNA) provides a noninvasive alternative to conventional monitoring surveys and the possibility of a more accurate assessment of species richness. Yet, its cost efficiency compared to traditional methods of monitoring is relatively unknown, especially when applied to monitoring around tidal, wave, and offshore wind energy installations. For this study, 202 peer-reviewed journal articles were dissected to inventory the diversity of supplies used for collecting and processing eDNA samples and to compile the average cost of eDNA surveys. Information collected included the type, volume, and brand of containers used in sampling; material, size, and brand of filters; and extraction methods. Cost information was gathered for the most common supplies, and a total cost was estimated for a hypothetical eDNA survey in Sequim Bay, WA, to compare with traditional methods of surveying such as beach seining and scuba surveys. The results showed a higher-than-expected diversity of supplies to collect and process eDNA samples. The most common supplies were 1 L Nalgene bottles at an average cost of 7.96 USD for collecting samples, 0.45 µm glass fiber Merck Millipore filters at an average cost of 1.51 USD for filtering samples, and the Qiagen DNeasy Blood and Tissue kit at 3.54 USD per sample for extracting DNA. When compared to beach seine and scuba surveys, eDNA surveys undertaken by senior researchers are less expensive for both initial surveys with all new materials as well as for follow-up surveys reusing some of the supplies. However, when surveys are done solely by students, eDNA surveys are more expensive than scuba surveys when no prior supplies are available and more than both beach seine and scuba surveys for follow-up surveys reusing supplies. In a professional sphere, where surveys are less often conducted by teams of students only, eDNA surveys are an effective and less-costly alternative to conventional methods. We anticipate that the development and refinement of eDNA methodology will continue to decrease surveying costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Videos, photos, and AI-derived grain size data associated with “High-throughput AI Video Surveys Enable Reproducible Multiscale Sediment Size Mapping, with Implications for Hydrobiogeochemical Parameterization”

NOTE: The manuscript associated with this data package is currently in review. The data may be revised based on reviewer feedback. Upon manuscript acceptance, this data package will be updated with the final dataset and additional metadata. This data package is associated with the manuscript “High-throughput AI Video Surveys Enable Reproducible Multiscale Sediment Size Mapping, with Implications for Hydrobiogeochemical Parameterization” under review. This data package includes five data types: 1) raw photos and videos from drone survey and walking smartphone surveys; 2) images derived from raw videos; 3) manual labeling of reference scales; 4) metadata for all images and photo resolution derived from artificial intelligence (AI) models or manual labels, 5) grain size data obtained from AI models for all photos, 6) metadata and grain size data after quality control, 7) summaries of sample efficiency for all data, and 8) computational fluid dynamics (CFD) data used to support hydro-biogeochemical (HBGC) parameter estimation. Such data is used to 1) demonstrate significant improvements in accuracy, efficiency, and quality control for grain size data collection with the help of AI models, 2) study the spatial heterogeneity of grain size and observation reproducibility based on tens of thousands of data points generated by the AI models, and 3) evaluate the impacts of grain size heterogeneity on key HBGC parameters across sediment-to-reach and hourly-to-yearly scales. In particular, the data package contains 116 folders and 179696 files. The files include 41 videos in .mov format, 64047 photos in .jpg format, 13541 video-derived photos in .png format, 12747 segmentation mask data in .tif format, 12747 segmentation data in .json format, 24771 .csv files that with metadata and grain size for each individual photo as well as water depth and velocity data from CFD and observation, 51791 .txt files of raw AI predicted labels, and 11 flight record data in .srt format. The summary for all metadata and grain size statistics information is included in “Scales_V3_NG.csv” and “Statistics_V3_NG.csv”. The summary for data that pass data quality control (QC) level 0-2 is included in “QCStatistics_V3_NG.csv”. The QC level 0 represents photos whose photo resolution is positive, excluding photos that miss reference scale. The QC level 1 means reference scale circularity uncertainty is less than 5% for smartphone images while representing photo resolution is larger than 0.44 mm/pixel for drone images. The QC level 2 means excluding photos whose grain number is less than 100, a minimum number of grains recommended by classic literature. The summary for each video’s name, length, frame rates, survey area, grain number, survey efficiency, etc. can be found in “QCSummary_V3_NG.csv”. The summary for site name, GPS coordinates, and number of images at each site can be found in “SitesSummary_V3_*.csv” files. Overall computational efficiency summary is reported in Table 4 of accompanying manuscript. Additionally, the nitrate concentration data used in this work was downloaded from an existing dataset published on ESS-DIVE (Boat-Dragged Sensor Hanford Reach.csv; Conner A. et al., 2020). We thank the United States Forest Service, Washington Department of Fish and Wildlife, Washington Department of Natural Resources, Cowiche Canyon Conservatory, Port of Benton, and the Confederated Tribes and Bands of the Yakama Nation for access to field locations where the data were collected. We also thank the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate data collection and optimization of data usage according to their values and worldview.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Bioinspired Macrocyclic Molecule Supported Two‐Dimensional Lamellar Membrane with Robust Interlayer Structure for High‐Efficiency Nanofiltration

Abstract 2D lamellar membranes (2DLMs) are used for efficient desalination and nanofiltration. However, weak interactions between adjacent stacked nanosheets result in susceptibility to swelling that limits practical applicability. Inspired by the super adhesion of multi‐point suction cups on octopus tentacles, a 2DLM is constructed from Ti 3 C 2 T x MXene supported by the macrocyclic “multi‐point” molecule cucurbit[5]uril (CB5) and demonstrated for nanofiltration of methyl blue (MB) and enrichment of uranyl carbonate. Experimental results and density functional theory calculations indicate that CB5 rivets to the surface of the nanoflakes through strong stable interactions between its multiple binding sites and surface hydroxyl functional groups on MXene nanosheets. This novel 2DLM exhibits excellent nanofiltration performance (69 L m −2 h −1 bar −1 permeance with 93.6% rejection for MB) and can be recycled at least 30 times without significant degradation. The 2DLM exhibits excellent swelling resistance at high salinity, with a demonstration of selective enrichment of uranyl carbonate from artificial water and natural seawater. The results provide a new strategy for constructing highly stable 2DLMs with interlayer spacing controllable from sub‐nano to nanometer scales, for size‐selective sieving of molecules and ions, high‐efficiency nanofiltration, and other applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Unraveling the implications of finite specimen size on the interpretation of dynamic experiments for polycrystalline aluminum through direct numerical simulations

Normal and Pressure-shear plate impact (NPI and PSPI) experiments are popular experimental techniques for studying the mean-field macroscopic behavior of polycrystalline metals under high-rate dynamic loading. However, since both configurations rely upon geometry for subjecting the specimen to high strain rates, these experiments often involve a limited specimen size. Moreover, because of the inherent heterogeneities present within polycrystalline metals, it is difficult to ascertain if the size of the specimen and/or regions where measurements are made are sufficiently large for making representative inferences about the mean-field macroscopic properties from single-point velocity measurements. In the present study, we quantify the expected measurement variability on observable point measurements in NPI and PSPI experiments by carrying out direct numerical simulations (DNS) of statistically representative polycrystalline microstructures subjected to dynamic compression and compression-shear loading. In particular, we consider the role of specific material heterogeneities (e.g. the grain-to-grain difference in size, crystallographic orientation) on dispersion in the normal and transverse particle velocity records and on local fluctuations in key state variables (e.g. velocity, accumulated plastic strain) by incorporating these effects directly into a representative synthetic microstructure geometry and crystalline description of pure polycrystalline aluminum. The form of the present study is a large parametric investigation, consisting of ten ensembles of one hundred simulations. Each of the thousand simulations reflects a randomly realized synthetic microstructure in one of five cases of decreasing average grain size for the two loading configurations. Our analysis of the DNS results demonstrates that for both of these experimental configurations, the grain size directly correlates with the coefficient of variation (CV) in simulated point measurements, showing a convergent decrease in CV to zero (i.e. particle velocity record approaches the mean-field value) with decreasing grain size. Remarkably, the magnitude of variations in the particle velocity record is shown to be largest where the deviatoric stresses are most significant. In the case of NPI, this occurs at the elastic and plastic wavefront, whereas, in the case of PSPI, the magnitude of fluctuations are approximately constant throughout the experimental window time. The reasoning for the scatter in particle velocity due to the heterogeneous microstructure is demonstrated to be dependent on the mechanisms for accommodating deformation and on the interaction of reflection waves generated at sites of heterogeneities occurring at the scale of grains. Lastly, we develop a power-law description for the magnitude of scattering versus characteristic length, which provides a statistical framework for assessing the required number of grains per characteristic specimen dimension for minimizing scatter within these two experimental configurations (NPI, PSPI).

36 MATERIALS SCIENCE↗