Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reference frames”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Estimation and correction of advection effects with single and multiple, conventional and Doppler radars

The laws of fluid motion are invariant under a Gallilean transformation. For a perfect observing system, the data analysis should, therefore, also be invariant under a Gallilean transformation. This invariance is often not preserved in practical observing systems. In this connection, it is often advisable to perform mesoscale analysis in a frame moving with respect to the earth's surface. In the present investigation the velocity of such a frame is referred to as an advection velocity. The investigation is concerned with remaining problems regarding the Gallilean transformation. The establishment of a frame of reference for the achievement of maximum coherence is considered, taking into account the case of given nonsimultaneous observations of scalars or Cartesian vectors. It is found that advection speed can be estimated objectively if a scalar or Cartesian vector can be observed directly and if, in addition, the time and position of each observation is approximately known.

Gal-Chen, T.↗

Whistler waves observed upstream from collisionless shocks

Waves in the frequency range 0.5 - 4 Hz were studied in the region upstream of the earth's bow shock using data from the fluxgate magnetic field experiment on IMP-6. Analysis of 150 examples of these waves during a three month interval indicates that amplitudes are generally less than 1 or 2 gammas and propagation directions generally make angles of between 20 and 40 degrees with the field direction. The waves as measured in the spacecraft frame of reference are either left or right hand polarized with respect to the average field direction. It is concluded that the observed waves are right handed waves in the plasma frame of reference with wavelengths of approximately 100 km propagating upstream in the whistler mode. Doppler shifting reduces the observed frequencies in the spacecraft frame and reverses the observed polarization for those waves propagating more directly upstream. Similar waves are seen ahead of most interplanetary shocks.

Fairfield, D. H.↗

Application of the Marsupial Paradigm to Tropical Cyclone Formation from Northwestward-Propagating Disturbances

A wave-tracking algorithm is developed for northwestward-propagating waves that, on occasion, play a role in tropical cyclogenesis over the western oceans. To obtain the Lagrangian flow structure, the frame of reference is translated obliquely at the same propagation speed with the precursor disturbance. Trajectory analysis suggests that streamlines in the obliquely translated frame of reference can be used to approximate flow trajectories. The algorithm was applied to Super Typhoon Nakri (2008), Tropical Cyclone Erika (2009), and a few other examples. Diagnoses of meteorological analyses and satellite-derived moisture and precipitation fields show that the marsupial framework for tropical cyclogenesis in tropical easterly waves is relevant also for northwestward-propagating disturbances as are commonly observed in the tropical western Atlantic, the Gulf of Mexico, and the western North Pacific. Finally, it is suggested that analysis of the global model data and satellite observations in the marsupial framework can provide useful guidance on early tropical cyclone advisories.

Wang, Zhuo↗

dlmcfpt.c1

The DLMC VAP uses inertial data from the ARM NAV system to transform the Doppler lidar beam angles (az and el) from the lidar's frame of reference to an Earth-fixed frame such the azimuth angle is measured clockwise from true north and the elevation angle is measured from the local horizon. Additionally, the VAP compensates the observed radial (air) velocity data for the effects of the platform velocity (i.e. corrected_radial_velocity = observed_radial_velocity-platform_radial_velocity). The VAP was developed specifically for MOSAiC. The dlmcfpt.c1 product contains the fixed point, or staring data. The dlmcusr.c1 product contains a user defined scan which is anything the operator wants it to be.

54 ENVIRONMENTAL SCIENCES↗

dlmcusr.c1

The DLMC VAP uses inertial data from the ARM NAV system to transform the Doppler lidar beam angles (az and el) from the lidar's frame of reference to an Earth-fixed frame such the azimuth angle is measured clockwise from true north and the elevation angle is measured from the local horizon. Additionally, the VAP compensates the observed radial (air) velocity data for the effects of the platform velocity (i.e. corrected_radial_velocity = observed_radial_velocity-platform_radial_velocity). The VAP was developed specifically for MOSAiC. The dlmcfpt.c1 product contains the fixed point, or staring data. The dlmcusr.c1 product contains a user defined scan which is anything the operator wants it to be.

54 ENVIRONMENTAL SCIENCES↗

A Hybrid Boundary Element-Finite Volume Method for Unsteady Transonic Airfoil Flows

A hybrid boundary element finite volume method for unsteady transonic flow computation has been developed. In this method, the unsteady Euler equations in a moving frame of reference are solved in a small embedded domain (inner domain) around the airfoil using an implicit finite volume scheme. The unsteady full-potential equation, written in the same frame of reference and in the form of the Poisson equation. is solved in the outer domain using the integral equation boundary element method to provide the boundary conditions for the inner Euler domain. The solution procedure is a time-accurate stepping procedure, where the outer boundary conditions for the inner domain are updated using the integral equation -- boundary element solution over the outer domain. The method is applied to unsteady transonic flows around the NACA0012 airfoil undergoing pitching oscillation and ramp motion. The results are compared with those of an implicit Euler equation solver, which is used throughout a large computational domain, and experimental data.

Hu, Hong↗

Numerical methods for instability mitigation in the modeling of laser wakefield accelerators in a Lorentz-boosted frame

Modeling of laser-plasma wakefield accelerators in an optimal frame of reference has been shown to produce orders of magnitude speed-up of calculations from first principles. Obtaining these speedups required mitigation of a high-frequency instability that otherwise limits effectiveness. In this paper, methods are presented which mitigated the observed instability, including an electromagnetic solver with tunable coefficients, its extension to accommodate Perfectly Matched Layers and Friedman's damping algorithms, as well as an efficient large bandwidth digital filter. It is observed that choosing the frame of the wake as the frame of reference allows for higher levels of filtering or damping than is possible in other frames for the same accuracy. Detailed testing also revealed the existence of a singular time step at which the instability level is minimized, independently of numerical dispersion. A combination of the techniques presented in this paper prove to be very efficient at controlling the instability, allowing for efficient direct modeling of 10 GeV class laser plasma accelerator stages. The methods developed in this paper may have broader application, to other Lorentz-boosted simulations and Particle-In-Cell simulations in general.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of tripod-scheme cold-atom wavepackets by manipulating a non-Abelian vector potential

Tripod-scheme cold atoms interacting with laser beams have attracted considerable interest for their role in synthesizing effective non-Abelian vector potentials. Such effective vector potentials can be exploited to realize an all-optical imprinting of geometric phases onto matter waves. By working on carefully designed extensions of our previous work, we show that coherent lattice structure of cold-atom sub-wavepackets can be formed and that the non-Abelian Aharonov-Bohm effect can be easily manifested via the translational motion of cold atoms. We also show that by changing the frame of reference, effects due to a non-Abelian vector potential may be connected with a simple dynamical phase effect, and that under certain conditions it can be understood as an Abelian geometric phase in a different frame of reference. Results should help design better schemes for the control of cold-atom matter waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Average Cosmological Invariant Parameters of Cosmic Gamma Ray Bursts

Average cosmological invariant parameters (ACIPs) are calculated for six groups of BATSE cosmic gamma-ray bursts selected by their peak fluxes on the 1.024s timescale. The ACIPs represent the average temporal and spectral properties of these events equally in the observer frame of reference and in the co-moving frames of outbursting emitters. The parameters are determined separately for rise fronts and for back slopes of bursts, defined as the time profiles before and after the main peaks, respectively. The ACIPs for the rise fronts are found to be different for different intensity groups, while the ACIPs for the back slopes show no significant dependence on intensity. We conclude that emitters of bursts manifest standard average properties only during the back slopes of bursts.

Mitrofanov, Igor G.↗

Three-Dimensional Modeling of Aircraft High-Lift Components with Vehicle Sketch Pad

Vehicle Sketch Pad (OpenVSP) is a parametric geometry modeler that has been used extensively for conceptual design studies of aircraft, including studies using higher-order analysis. OpenVSP can model flap and slat surfaces using simple shearing of the airfoil coordinates, which is an appropriate level of complexity for lower-order aerodynamic analysis methods. For three-dimensional analysis, however, there is not a built-in method for defining the high-lift components in OpenVSP in a realistic manner, or for controlling their complex motions in a parametric manner that is intuitive to the designer. This paper seeks instead to utilize OpenVSP's existing capabilities, and establish a set of best practices for modeling high-lift components at a level of complexity suitable for higher-order analysis methods. Techniques are described for modeling the flap and slat components as separate three-dimensional surfaces, and for controlling their motion using simple parameters defined in the local hinge-axis frame of reference. To demonstrate the methodology, an OpenVSP model for the Energy-Efficient Transport (EET) AR12 wind-tunnel model has been created, taking advantage of OpenVSP's Advanced Parameter Linking capability to translate the motions of the high-lift components from the hinge-axis coordinate system to a set of transformations in OpenVSP's frame of reference.

Olson, Erik D.↗

Solution of steady and unsteady transonic-vortex flows using Euler and full-potential equations

Two methods are presented for inviscid transonic flows: unsteady Euler equations in a rotating frame of reference for transonic-vortex flows and integral solution of full-potential equation with and without embedded Euler domains for transonic airfoil flows. The computational results covered: steady and unsteady conical vortex flows; 3-D steady transonic vortex flow; and transonic airfoil flows. The results are in good agreement with other computational results and experimental data. The rotating frame of reference solution is potentially efficient as compared with the space fixed reference formulation with dynamic gridding. The integral equation solution with embedded Euler domain is computationally efficient and as accurate as the Euler equations.

Kandil, Osama A.↗

Three-dimensional simulation of slender delta wing rock and divergence

Computational simulation of three-dimensional flows around a delta wing undergoing rock and roll-divergence motions is presented. The problem is a multidisciplinary one where fluid-dynamics equations and rigid-body-dynamics equations are sequentially solved. For the fluid-dynamics part, the unsteady Euler equations, which are written relative to a moving frame of reference, are solved using an implicit, approximately-factored, central-difference, finite-volume scheme. For the rigid-body dynamics part, the Euler equation of rigid-body rolling motion is solved using a four-stage Runge-Kutta scheme. Since the applications do not include deforming wings or relative-rigid-body motions, the computational-fluid-dynamics grid, which is fixed in the moving frame of reference, does not need to be updated once it is generated.

Kandil, Osama A.↗

Foundational Concepts in Simulation-Based Resilience Analysis and Design

Resilience is a topic of increasing interest–with ever-present calls from policymakers to increase the resilience of complex systems and infrastructure. However, resilience as a concept can be confusing, because of a lack of a common unified definition and frame of reference. Sometimes it can appear as if resilience analysis is merely duplicating other, more mature fields such as safety, reliability, or risk, while other times it seems as if resilience is providing an “alternative” view with limited rigor. To better understand the resilience concept (and its relation to the broader field of risk management), this paper will present the perspective of simulation-based resilience analysis and design, including some of the foundational precepts and resultant concepts defining the resilience concept. It will further present the motivation for using simulation to understand resilience and highlight some ongoing work and research challenges in this area. From this frame of reference, one can better understand the field of resilience, including how different aspects and definitions of resilience relate to each other, and how resilience relates to broader design considerations and practices.

resilience↗

Foundational Concepts in Simulation-Based Resilience Analysis and Design

Resilience is a topic of increasing interest–with ever-present calls from policymakers to increase the resilience of complex systems and infrastructure. However, resilience as a concept can be confusing, because of a lack of a common unified definition and frame of reference. Sometimes it can appear as if resilience analysis is merely duplicating other, more mature fields such as safety, reliability, or risk, while other times it seems as if resilience is providing an “alternative” view with limited rigor. To better understand the resilience concept (and its relation to the broader field of risk management), this paper will present the perspective of simulation-based resilience analysis and design, including some of the foundational precepts and resultant concepts defining the resilience concept. It will further present the motivation for using simulation to understand resilience and highlight some ongoing work and research challenges in this area. From this frame of reference, one can better understand the field of resilience, including how different aspects and definitions of resilience relate to each other, and how resilience relates to broader design considerations and practices.

resilience↗

Trending of SNPP Ephemeris and Its Implications on VIIRS Geometric Performance

This paper describes trends in the Suomi National Polar-orbiting Partnership (SNPP) spacecraft ephemeris data over the four and half years of on-orbit operations. It then discusses the implications of these trends on the geometric performance of the Visible Infrared Imaging Radiometer Suite (VIIRS), one of the instruments onboard SNPP. The SNPP ephemeris data includes time stamped spacecraft positions and velocities that are used to calculate the spacecraft altitude and sub-satellite locations. Through drag make-up maneuvers (DMUs) the orbital mean altitude (spacecraft altitude averaged over an orbit) has been maintained at 838.8 kilometers to within plus or minus 0.2 kilometers and the orbital period at 101.5 minutes to within plus or minus 0.2 seconds. The corresponding orbital mean velocity in the terrestrial frame of reference has been maintained at 7524 meters per second to within plus or minus 0.5 meters per second. Within an orbit, the altitude varies from 828 kilometers near 15 degrees North latitude to 856 kilometers near the South Pole. Inclination adjust maneuvers (IAMs) have maintained the orbit inclination angle at 98.67 degrees to within plus or minus 0.07 degrees and the sun-synchronous local time at ascending node (LTAN) at 13:28 to within plus or minus 5 minutes. Besides these trends, it is interesting to observe that the orbit's elliptic shape has its major axis linking the perigee and apogee shorter than the line linking the ascending node and the descending node. This effect is caused by the Earth's oblate spheroid shape and deviates from a Keplerian orbit theory in which the two orbiting bodies are point masses. VIIRS has 5 imagery resolution bands, 16 moderate resolution bands and a day-night band, with 32, 16 and 16 detectors, respectively, aligned in the spacecraft flight (also known as track) direction. For each band's sample within a scan, the detectors sample the Earth's surface simultaneously in the track direction in the Earth Centered Inertial frame of reference. The distance between the center of the area sensed by the trailing detectors of one scan and the leading detectors of the next includes a component caused by earth rotation. This earth rotation component is relatively small (approximately 70 meters per second) for an orbit like SNPP, but must be taken into account in the design of low-Earth orbit scanning sensors similar to VIIRS to ensure contiguous coverage at nadir.

SNPP↗

Wave-interactions in supersonic and hypersonic flows

Work completed under the current grant comprises the start of a theoretical and computational attack on the subharmonic route to secondary instabilities in compressible flows. The total flow field in this problem is made up of the following components: (1) a steady streamwise mean boundary layer flow which depends only on the normal space component y; (2) a two-dimensional time dependent T-S wave which moves with wavespeed c and has no spanwise dependence; and (3) a fully three-dimensional, time dependent T-S wave whose streamwise wavenumber is half of the streamwise wavenumber associated with the two-dimensional T-S wave in b. If a frame of reference is adopted which moves with the wavespeed c of the 2-D T-S wave, the time dependence of this portion of the flow can be eliminated. The effective steady mean flow in this problem is now the sum of the original parallel steady mean flow and the initial 2-D T-S instability. Dependence on the streamwise coordinate x in this mean flow can be extracted by assuming normal mode expansions involving complex exponentials and the streamwise wavenumber a. However, it is important to note that, because this is a wave-wave interaction problem, unlike the usual linear instability case, both the complex exponential, and its complex conjugate, must be retained in describing the 2-D T-S wave. The role of the perturbation to the steady mean flow is now played by the 3-D time dependent T-S wave. In treating this wave, normal modes in the streamwise and spanwise directions and time may be used. Consistent with the subharmonic nature of this transition route, the streamwise wavenumber is a/2, and complex conjugates of the complex exponential must be employed. This is not the case with the modes giving z and t dependence with wavespeed o and spanwise wavenumber B as the effective mean flow quantities are independent of z and their time dependence is accounted for by the moving frame of reference. Consequently, the wave-wave interaction which will produce mean flow modification occurs only through the streamwise exponentials.

Lakin, William D.↗

Optical seismic sensor systems and methods

Disclosed is an optical seismic sensor system for measuring seismic events in a geological formation, including a surface unit for generating and processing an optical signal, and a sensor device optically connected to the surface unit for receiving the optical signal over an optical conduit. The sensor device includes at least one sensor head for sensing a seismic disturbance from at least one direction during a deployment of the sensor device within a borehole of the geological formation. The sensor head includes a frame and a reference mass attached to the frame via at least one flexure, such that movement of the reference mass relative to the frame is constrained to a single predetermined path.

47 OTHER INSTRUMENTATION↗

Relativistic perturbations in ΛCDM: Eulerian and Lagrangian approaches

We study the relativistic dynamics of a pressure-less and irrotational fluid of dark matter (CDM) with a cosmological constant (Λ), up to second order in cosmological perturbation theory. In our analysis we also account for vector and tensor perturbations and include primordial non-Gaussianity. We consider three gauges: the synchronous-comoving gauge, the Poisson gauge and the total matter gauge, where the first is the unique relativistic Lagrangian frame of reference, and the latters are convenient gauge choices for Eulerian frames. Our starting point is the metric and fluid variables in the Poisson gauge up to second order. We then perform the gauge transformations to the synchronous-comoving gauge and subsequently to the total matter gauge. Our expressions for the metrics, densities, velocities, and the gauge generators are novel and coincide with known results in the limit of a vanishing cosmological constant.

79 ASTRONOMY AND ASTROPHYSICS↗