Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “program design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

An across-the-bay flight support structure designed specifically for the Spartan program

The preliminary design of an across-the-bay Flight Support Structure optimized to the specific requirements of the Spartan program has been completed. Although approximately 15 percent heavier than the initial goal, preliminary analysis indicate very low stress levels and significant reduction in weight should be possible in the final design. This structure is capable of supporting two Spartan 200-class spacecraft or attached payloads of equivalent total weight. The inherent structural efficiency of monocoque type construction is utilized. The minimization of fabrication and assembly costs and provision for simple and versatile payload interfacing where given significant considerations. Modularity of this structure allows it to be readily adapted for use as the primary structure of an Aries-class Spartan free-flyer utilizing the Orbit trunning latch mechanisms, thus eliminating the need for a flight support structure.

Rast, J. J.↗
NASA NTRS1998

Robust Control Design via Linear Programming

This paper deals with the problem of synthesizing or designing a feedback controller of fixed dynamic order. The closed loop specifications considered here are given in terms of a target performance vector representing a desired set of closed loop transfer functions connecting various signals. In general these point targets are unattainable with a fixed order controller. By enlarging the target from a fixed point set to an interval set the solvability conditions with a fixed order controller are relaxed and a solution is more easily enabled. Results from the parametric robust control literature can be used to design the interval target family so that the performance deterioration is acceptable, even when plant uncertainty is present. It is shown that it is possible to devise a computationally simple linear programming approach that attempts to meet the desired closed loop specifications.

Keel, L. H.↗
NASA NTRS1963

Voyager design study. volume vi- program plans

Voyager spacecraft design - landing module sterilization effects and requirements, long term space soak effects, high reliability requirements, and entry and operation on Mars

STERILIZATION↗
NASA NTRS2008

Using Space Weather Variability in Evaluation the Radiation Environment Specifications for NASA's Constellation Program

Hardware design environments for NASA's Constellation Program-the Vision for Space Exploration program to design and build new vehicles for servicing low Earth orbit and the Moon and beyond-have been developed that are necessarily conservative in nature to assure robust hardware design and development required to build space systems which will meet operational goals in a wide range of space environments, This presentation will describe the rationale used to establish the space radiation and plasma design environments specified for a variety of applications including total ionizing radiation dose, dose rate effects, and spacecraft charging and will compare the design environments with "space weather" variability to evaluate the applicability of the design environments and potential vulnerabilities of the system to extreme space weather events.

Coffey, Victoria N.↗
NASA NTRS1976

COMMAND: A FORTRAN program for simplified composite analysis and design

A FORTRAN program is presented for preliminary analysis and design of multilayered composite panels subjected to inplane loads. All plys are of the same material. The composite is assumed symmetric about the midplane, but need not be balanced. Failure criterion includes limit ply strains and lower bounds on composite inplane stiffnesses. Multiple load conditions are considered. The required input data is defined and examples are provided to aid the use in making the program operational. Average panel design times are two seconds on an IBM 360/67 computer. Results are compared with published literature. A complete FORTRAN listing of program COMAND is provided. In addition, the optimization program CONMIN is required for design.

Vanderplaats, G. N.↗
NASA NTRS1972

Top down, bottom up structured programming and program structuring

New design and programming techniques for shuttle software. Based on previous Apollo experience, recommendations are made to apply top-down structured programming techniques to shuttle software. New software verification techniques for large software systems are recommended. HAL, the higher order language selected for the shuttle flight code, is discussed and found to be adequate for implementing these techniques. Recommendations are made to apply the workable combination of top-down, bottom-up methods in the management of shuttle software. Program structuring is discussed relevant to both programming and management techniques.

Hamilton, M.↗
NASA NTRS1974

Quiet engine program flight engine design study

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

Klapproth, J. F.↗
NASA NTRS1985

An expert system for choosing the best combination of options in a general-purpose program for automated design synthesis

An expert system to aid users of the Automated Design Synthesis (ADS) general-purpose optimization program has been developed. ADS has approximately 100 combinations of strategy, optimizer, and search options from which to choose. This expert system aids the user in choosing the best combination of options for solving a particular problem. The system is written in LISP, contains about 200 rules, and executes on DEC-VAX and IBM PC/XT computers.

Rogers, J. L., Jr.↗
NASA NTRS1988

Space Station design integration

This paper discusses the top Program level design integration process which involves the integration of a US Space Station manned base that consists of both US and international Elements. It explains the form and function of the Program Requirements Review (PRR), which certifies that the program is ready for preliminary design, the Program Design Review (PDR), which certifies the program is ready to start the detail design, and the Critical Design Review (CDR), which certifies that the program is completing a design that meets the Program objectives. The paper also discusses experience, status to date, and plans for continued system integration through manufacturing, testing and final verification of the Space Station system performance.

Carlisle, Richard F.↗
NASA NTRS1990

An investigation of constraint-based component-modeling for knowledge representation in computer-aided conceptual design

Originally, computer programs for engineering design focused on detailed geometric design. Later, computer programs for algorithmically performing the preliminary design of specific well-defined classes of objects became commonplace. However, due to the need for extreme flexibility, it appears unlikely that conventional programming techniques will prove fruitful in developing computer aids for engineering conceptual design. The use of symbolic processing techniques, such as object-oriented programming and constraint propagation, facilitate such flexibility. Object-oriented programming allows programs to be organized around the objects and behavior to be simulated, rather than around fixed sequences of function- and subroutine-calls. Constraint propagation allows declarative statements to be understood as designating multi-directional mathematical relationships among all the variables of an equation, rather than as unidirectional assignments to the variable on the left-hand side of the equation, as in conventional computer programs. The research has concentrated on applying these two techniques to the development of a general-purpose computer aid for engineering conceptual design. Object-oriented programming techniques are utilized to implement a user-extensible database of design components. The mathematical relationships which model both geometry and physics of these components are managed via constraint propagation. In addition, to this component-based hierarchy, special-purpose data structures are provided for describing component interactions and supporting state-dependent parameters. In order to investigate the utility of this approach, a number of sample design problems from the field of aerospace engineering were implemented using the prototype design tool, Rubber Airplane. The additional level of organizational structure obtained by representing design knowledge in terms of components is observed to provide greater convenience to the program user, and to result in a database of engineering information which is easier both to maintain and to extend.

Kolb, Mark A.↗
NASA NTRS1972

GENENG 2: A program for calculating design and off-design performance of two- and three-spool turbofans with as many as three nozzles

A computer program which calculates steady-state design and off-design jet engine performance for two- or three-spool turbofans with one, two, or three nozzles is described. Included in the report are complete FORTRAN 4 listings of the program with sample results for nine basic turbofan engines that can be calculated: (1) three-spool, three-stream engine; (2) two-spool, three-stream, boosted-fan engine; (3) two-spool, three-stream, supercharged-compressor engine; (4) three-spool, two-stream engine; (5) two-spool, two-stream engine; (6) three-spool, three-stream, aft-fan engine; (7) two-spool, three-stream, aft-fan engine; (8) two-spool, two-stream, aft-engine; and (9) three-spool, two-stream, aft-fan engine. The simulation of other engines by using logical variables built into the program is also described.

Fishbach, L. H.↗
NASA NTRS1980

Transonic airfoil analysis and design

TRANDES program provides aircraft engineer with accurate and efficient tool for analysis of steady, irrotational, transonic flow over specified two dimensional airfoil in free air. Program is used to design airfoils having prescribed pressure distribution, including effects of weak viscous interaction. TRANDES yield accurate solutions efficiently for biconvex, conventional, and aftcambered airfoils.

Carlson, L. A.↗
NASA NTRS1981

IGDS/TRAP Interface Program (ITIP). Detailed Design Specification (DDS)

The software modules which comprise the IGDS/TRAP Interface Program are described. A hierarchical input processing output (HIPO) chart for each user command is given. The description consists of: (1) function of the user command; (2) calling sequence; (3) moduls which call this use command; (4) modules called by this user command; (5) IGDS commands used by this user command; and (6) local usage of global registers. Each HIPO contains the principal functions performed within the module. Also included with each function are a list of the inputs which may be required to perform the function and a list of the outputs which may be created as a result of performing the function.

Jefferys, S.↗
NASA NTRS1992

The NASA/Industry Design Analysis Methods for Vibrations (DAMVIBS) Program - A government overview

An overview is presented of government contributions to the program called Design Analysis Methods for Vibrations (DAMV) which attempted to develop finite-element-based analyses of rotorcraft vibrations. NASA initiated the program with a finite-element modeling program for the CH-47D tandem-rotor helicopter. The DAMV program emphasized four areas including: airframe finite-element modeling, difficult components studies, coupled rotor-airframe vibrations, and airframe structural optimization. Key accomplishments of the program include industrywide standards for modeling metal and composite airframes, improved industrial designs for vibrations, and the identification of critical structural contributors to airframe vibratory responses. The program also demonstrated the value of incorporating secondary modeling details to improving correlation, and the findings provide the basis for an improved finite-element-based dynamics design-analysis capability.

Kvaternik, Raymond G.↗