Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prepare”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of the method of active site characterization for determining structure-sensitivity in Ag-catalyzed ethylene epoxidation

We report catalysts have been prepared on a low surface area α-Al 2 O 3 support used commercially for previous generation olefin epoxidation catalysts. Prescreening of the low surface area alumina (0.73 m 2 /g) indicated the absence of acid catalyzed isomerization of EO at an evaluation temperature of 210 °C. A 0.1 wt% Ag base material synthesized by incipient wetness impregnation of AgNO 3 was used as a base material for electroless deposition (ED) of additional Ag to increase particle sizes by controlled reduction of Ag + directly onto the preexisting Ag surface to form weight loadings between 0.3 and 5.0 wt% metal. A 12 wt% Ag/α-Al 2 O 3 using Ag 2 C 2 O 4 as the Ag precursor was also prepared to compare performance of the ED samples with a catalyst more typical of industrial formulations. Characterization by SEM, STEM, and hydrogen titration of oxygen precovered Ag characterized before and after catalytic evaluation indicated that microscopy is required to accurately represent distributions of Ag particle sizes, but H 2 titration of O-precovered Ag gives the best representation of active sites since it directly counts the number of Ag surface sites. Larger particles >100 nm are resistant to both Ag sintering and carbon foulant; TOF values were relatively insensitive to particle size with only a 2.2 × difference between the best and worst performing samples. Selectivity, which is not a function of TOF, shows the most significant structure sensitivity effect where particle sizes follow the trend 67 nm ≈ 92 nm (58% EO) < 157 nm (67% EO) < 211–542 nm (73% EO). The lower EO selectivities were also correlated with increased fouling for the smaller Ag sizes, suggesting that more strongly bound EO precursor(s) leads to combustion and CO 2 /H 2 O formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Identification and evolution of active sites in isomorphously substituted Fe-ZSM-5 catalysts for methane dehydroaromatization (MDA)

Methane dehydroaromatization (MDA) enables the catalytic conversion of methane into aromatics, mainly benzene, along with hydrogen, in a single-step process under non-oxidative conditions. In this study, we prepared a series of isomorphously substituted Fe-ZSM-5 catalysts with exclusively isolated or low-oligomerized sites up to 3.2% Fe weight loading by adding ethylenediaminetetraacetic acid (EDTA) to the crystallization gel. These catalysts exhibit no induction/activation period and a significantly higher maximum product yield compared to Fe/ZSM-5 catalysts prepared by the incipient wetness impregnation method and containing extensively aggregated FeOx. This investigation focuses on the evolution of Fe sites during the post-synthetic treatments. Most importantly, we demonstrate the quantitative relation between Fe site isolation and catalytic activity, proving that isolated or low-oligomerized Fe species at the exchange sites formed during post-synthetic retreatment are the active sites for methane activation.

02 PETROLEUM↗
DOE OSTI2022

Highly selective hydrogenation of phenol to cyclohexanone over a Pd-loaded N-doped carbon catalyst derived from chitosan

A highly stable Pd-loaded N-doped carbon catalyst (ACN pd ) for phenol hydrogenation was prepared from chitosan by hydrothermal carbonization. ACN pd does not require a reduction step before catalytic use due to the Pd in the as-prepared catalyst mainly exists in the form of Pd 0 (80%). The carbon support involves N-containing groups such as pyridinic nitrogen and pyrrolic nitrogen, which could provide basic sites to adsorb phenol effectively. The as-fabricated ACN pd shows high catalytic performance with turnover frequency (TOF) of 29.34 h -1 . Accordingly, a phenol conversion of 100% and a cyclohexanone selectivity of 99.1% are achieved in 5 h at 100 °C and 1 MPa H 2 . This outstanding performance is attributed to the synergetic effects of the Pd particles, the N-functional groups, and the Lewis acid sites on the support. The carbon support presents intrinsic Lewis acid sites due to its electrophilicity, and Pd doping further increases the strength of such acid sites as it causes electron-deficient structural features. Moreover, the Lewis acid sites inhibit the over-hydrogenation from cyclohexanone to cyclohexanol. This study provides new insights into the application of functional biomass-based carbon materials as catalyst supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Medium controlled aggregative growth as a key step in mesoporous silica nanoparticle formation

Near monodisperse mesoporous silica nanoparticles (MSN) represent a promising and rapidly developing type of mesoporous silica materials; however, the vast data on their synthesis remains unorganized and ill-understood. We systematically studied the formation of MSN under basic and neutral conditions using various temperatures, CTAB concentrations, hydrolyzing agents (triethanolamine, ammonia, phosphate buffers), and media with different colloidal stabilization properties (with ethanol as a cosolvent and monovalent salts). In the typical conditions for the preparation of stable MSN colloids, the particle size was controlled by colloidal stabilization by the medium (solvent type, ionic strength, and surfactant concentration) in agreement with the “aggregative growth” mechanism, rather than by solely the hydrolysis and condensation rates conventionally used for data interpretation in the classical nucleation theory. Medium properties (pH, ion types and concentration, polarity) also defined the efficiency of silica-surfactant cooperative self-assembly, which directly affected the porosity, mesopore size and pore wall thickness. Interestingly, this traditional silica-surfactant route showed a limited effect on the particle size, emphasizing the dominating role of colloidal stabilization in the studied reaction conditions. In situ pH measurements showed that every reaction medium has unique pH evolution profiles depending on the buffer capacity, hydrolysis and condensation rates. Reaction systems that fail to maintain the working pH can lead to non-porous products or undesired particle morphology and size distribution. The established particle formation mechanism allowed us to formulate comprehensive guidelines for preparing relatively concentrated colloids of near monodisperse (PDI 5–15%) mesoporous 30–700 nm silica spheres with variable porosity and mesopore size. Here, these findings will be particularly useful in designing new mesoporous silica-containing materials for biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sustainable bioleaching of lithium-ion batteries for critical materials recovery

The demand for lithium-ion batteries (LIBs) has increased substantially over the last few decades due to their longer lifetime, greater resistance to self-discharge, and higher output voltage compared to other battery types. With the global trend of electrifying vehicle fleets, the number of LIBs reaching their end-of-life (EOL) is expected to grow substantially in the next decade. These EOL LIBs represent a significant secondary source of materials (e.g., Li, Co, Ni, Mn) that can be recovered and reused in LIBs or other products. In this study, we developed a bioleaching process that could recover critical materials from EOL LIBs in an economical and environmentally sustainable manner under industrially relevant conditions. Black mass, i.e., cathode-containing powder, prepared from EOL LIBs was leached using a biolixiviant produced from corn stover by Gluconobacter oxydans bacteria. Iron(II) was used as a reducing agent to promote metal dissolution. Techno-economic analysis (TEA) estimated a potential average profit margin of 21% for processing 10,000 t of black mass per year, which represents approximately 30% of the available black mass in the US in 2020. Life cycle assessment (LCA) demonstrated that bioleaching of spent LIBs could be more environmentally sustainable than alternative hydrometallurgical recovery methods such as hydrochloric acid leaching (16-19 kg vs. 43-91 kg CO 2 equivalent global warming potential per kg of recovered cobalt). The TEA results are highly dependent on the cost of black mass production, which varies by EOL LIB collection and transportation costs. Finally, emerging technologies for deactivating used LIBs for fire safety at collection centers will allow the transport of EOL LIBs as non-hazardous materials, lower the cost of preparing black mass and thereby increase economic prospects for EOL LIBs recycling using this approach.

25 ENERGY STORAGE↗
DOE OSTI2021

Correlation of Early-Stage Growth Process Conditions with Dislocation Evolution in MOCVD-Based GaP/Si Heteroepitaxy

To identify the complex relationships between early-stage growth processes and the resultant defect microstructure in GaP/Si heteroepitaxy, a holistic study of several key metal-organic chemical vapor deposition (MOCVD) parameters was conducted, focusing on Si surface preparation and GaP atomic layer epitaxy (ALE) based nucleation processes. Here, crystalline defects related to the lattice mismatch and/or interfacial heterovalency, namely misfit dislocations (MD), threading dislocations (TD), and stacking fault pyramids (SFP), were quantitatively characterized via electron channeling contrast imaging (ECCI) and correlated against the different process variations. Choice of Si surface preparation method between the two examined (dilute SiH4 annealing versus Si2H6 based homoepitaxy) had little impact on resultant GaP film morphology and defect content, whereas differing GaP ALE nucleation conditions produced much more substantial changes. In particular, the initial precursor species (tert-butylphosphine versus triethygallium) and ALE cycle purge times both yielded significant influence over threading dislocation densities (TDD) in thin (100 nm), post-critical thickness GaP/Si films, with TDD spanning two orders of magnitude, from 6.7×10 7 cm -2 to 7.1×10 5 cm -2 , depending on the specific process conditions employed. SFP densities were also found to follow a similar trend, ranging from 2.0×10 7 cm -2 to 1.8×10 5 cm -2 , but with no apparent causal relationship between SFP density and TDD. To help explain the dramatic differences observed, detailed, large-area MD network characterization was used to provide statistically-relevant quantitative analyses of the critical dislocation dynamics (introduction rates and glide velocities) associated with the different process variants. These extracted values are then correlated against the ALE process variants to provide insight into the potential mechanistic roles of the different growth processes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of Pt-Metal Alloy Catalysts with Various Ionomers on Oxygen Reduction Reaction in Fuel Cell Application

Pt-M/C (M = Co, Ni, Mn, etc.) alloy catalysts exhibit superior oxygen reduction reaction (ORR) activity compared to pure Pt/C, leading to a high energy efficiency in hydrogen fuel cells. However, many Pt-M/C alloy catalysts were synthesized and evaluated at the lab scale in model test-bed systems like rotating disc electrodes, which don't always correlate to performance within a fuel cell system; there is a clear need to evaluate catalysts in electrodes that can be prepared at industrially relevant scales to evaluate how factors like ink formulation can greatly affect device-level of fuel cell performance. Herein, three commercial Pt-M/C alloy catalysts (two Pt-Co/C and one Pt-Ni/C) were comprehensively characterized by various techniques. The results show that the average particle sizes of the three catalysts are close to 5 nm; the atomic ratio of Pt/M is around 4; and the M was successfully embedded into Pt lattice, resulting in the positive shift of Pt 4f in XPS spectra and XRD patterns. These catalytic materials were incorporated into 9 different cathode catalyst layers (CCLs) with three kinds of ionomers (Nafion D2020, high oxygen permeability ionomer (HOPI), and Aquivion D79-25BS), and their performance in proton exchange membrane fuel cells (PEMFCs) were investigated. The results demonstrate that the Pt-Co/C catalysts possess a higher mass activity (MA) than Pt-Ni/C; the cathodes with Nafion ionomer provide the highest MA while electrodes with Aquivion ionomer showed the lowest activity, attributed to poor H+ conductivity resulting from suboptimal ionomer incorporation. Finally, these alloys were shown to exceed DOE targets for MA and H2/Air performance reported in the recent publications at beginning of life and after 90k cycle catalyst AST protocol. This study provides valuable performance benchmarks for these materials guiding future Pt-M/C catalyst design and material integration for heavy duty PEMFC applications.

08 HYDROGEN↗
DOE OSTI2021

Carbon decorated Li 3 V 2 (PO 4 ) 3 for high-rate lithium-ion batteries: Electrochemical performance and charge compensation mechanism

Fast charging and high-power delivering batteries are highly demanded in mobile electronics, electric vehicles and grid energy storage, but there are full of challenges. The star-material Li 3 V 2 (PO 4 ) 3 is demonstrated as a promising high-rate cathode material meeting the above requirements. Herein, we report the carbon decorated Li 3 V 2 (PO 4 ) 3 (LVP/C) cathode prepared via a facile method, which displays a remarkable high-rate capability and long-term cycling performance. Briefly, the prepared LVP/C delivers a high discharge capacity of 122 mAh g -1 (~93% of the theoretical capacity) at a high rate up to 20 C and a superior capacity retention of 87.1% after 1000 cycles. Importantly, by applying a combination of X-ray absorption spectroscopy and full-range mapping of resonant inelastic X-ray scattering, we clearly elucidate the structural and chemical evolutions of LVP upon various potentials and cycle numbers. Furthermore, we show unambiguous spectroscopic evidences that the evolution of the hybridization strength between V and O in LVP/C as a consequence of lithiation/delithiation is highly reversible both in the bulk and on the surface during the discharge-charge processes even over extended cycles, which should be responsible for the remarkable electrochemical performance of LVP/C. Our present study provides not only an effective synthesis strategy but also deeper insights into the surface and bulk electrochemical reaction mechanism of LVP, which should be beneficial for the further design of high-performance LVP electrode materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Towards extreme fast charging of 4.6V LiCoO 2 via mitigating high-voltage kinetic hindrance

High-voltage LiCoO 2 (LCO) is an attractive cathode for ultra-high energy density lithium-ion batteries (LIBs) in the 3C markets. However, the sluggish lithium-ion diffusion at high voltage significantly hampers its rate capability. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that the kinetic limitations can be mitigated by a facial Mg 2+ +Gd 3+ co-doping method. The as-prepared LCO shows significantly enhanced Li-ion diffusion mobility at high voltage, making more homogenous Li-ion de/intercalation at a high-rate charge/discharge process. The homogeneity enables the structural stability of LCO at a high-rate current density, inhibiting stress accumulation and irreversible phase transition. When used in combination with a Li metal anode, the doped LCO shows an extreme fast charging (XFC) capability, with a superior high capacity of 193.1 mAhg -1 even at the current density of 20C and high-rate capacity retention of 91.3% after 100 cycles at 5C. In conclusion, this work provides a new insight to prepare XFC high-voltage LCO cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2025

Upcycling of post-consumer mixed polyolefin feedstock: An economic and technical evaluation

Here, this study reports techno-economic and life cycle analyses to evaluate the economic and environmental impacts of mechanically recycled PE/PP blends in the presence of rheology modifiers. Additionally, fiber-reinforced composites derived from the compatibilized blends were prepared and evaluated for their performance compared with virgin plastics. Results suggest that compatibilized PE/PP blends exhibit a 70% lower selling price compared to virgin PE. Furthermore, these blends achieved a 74% reduction in greenhouse gas emissions or climate change impact compared to the virgin counterpart. Fiber-reinforced composites from compatibilized PE/PP blends demonstrated improved or comparable mechanical properties relative to composites made from virgin PE/PP blends. Based on their favorable cost and environmental impact, along with performance comparable to virgin composites, compatibilized PP/PE composites made from post-consumer plastics can find applications in large-scale composite manufacturing.

Fiber reinforced plastics (FRP)↗
DOE OSTI2021

Isotropic nanocrystalline Sm(Fe,Co) 11.3 Ti 0.7 magnets modified with B and Zr

Rare-earth-lean Sm(Fe,Co,Ti) 12 alloys with the ThMn 12 crystal structure and less than one Ti atom per formula unit have the potential of exceptionally powerful permanent magnets, but all prior attempts to develop high coercivity in bulk alloys, especially coercivity combined with crystallographic texture, have fallen short of the expectations. This study was aimed at improvement of the currently best Sm(Fe,Co,Ti) 12 magnets prepared through melt-spinning which are inherently isotropic. Modifications of the alloys with B and Zr, already demonstrated in earlier studies to be effective separately, have been implemented simultaneously. Here, a systematic study of Sm 1.1-x (Fe,Co) 11.3-y Ti 0.7 B y alloys melt-spun at a tangential speed of 50 m/s and annealed at 600–950 °C allowed for monitoring the continuous evolution of the two consecutive crystal structures, those of the TbCu 7 and ThMn 12 types. Zirconium was found to facilitate the formation of the 1:12 structure at the expense of the 1:7, whereas boron has the opposite effect, at certain concentrations completely suppressing the 1:12. When the two alloying elements are introduced simultaneously, they inhibit growth of the 1:12 crystallites at annealing temperatures higher than 800 °C, thus allowing for the development of a higher coercivity. Because of instrumental limitations, bulk magnets were prepared through a two-step process – compaction of the melt-spun ribbons at 650 °C and additional treatment at a higher temperature – and they were characterized by a reduced, 90–93%, density. Nevertheless, an isotropic Sm 0.9 Zr 0.2 (Fe,Co) 10.8 Ti 0.7 B 0.5 magnet exhibited fair values of the remanence (7.4 kG), maximum energy product (8.5 MGOe) and coercivity (5.4 kOe), as well as high Curie temperature of 525 °C and remarkably small temperature coefficient of the coercivity, -0.25%/°C.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of alloying with Sc, Nb and Zr on reduction-diffusion synthesis of magnetically hard Sm(Fe,Co,Ti) 12 -based monocrystalline powders

Powders of Sm(Fe,Co) 11.2 Ti 0.8 alloys modified with Sc, Nb and Zr, as well as with additional Ti were prepared by reducing mechanically activated raw oxides with Ca metal in the furnace preheated to 990–1250 °C. Expansion of the crystal lattice upon introduction of Nb or additional Ti implies that atoms of these elements replace the smaller Fe atoms in the tetragonal ThMn 12 -type structure. On the other hand, contraction of the lattice upon introduction of Sc or Zr was smaller than what was expected for replacement of the Sm atoms, which suggests that the Sc and Zr atoms replace both the Sm and Fe atoms. Washing away the reduction byproducts expands the crystal lattice of the 1:12 particles and increases their coercivity. The lattice expansion associated with the washing is believed to be caused by interstitial H atoms; more research, however, is needed to establish the mechanism(s) of the washing effect on the coercivity. The earlier reported development of a high coercivity in zirconium-modified monocrystalline particles achieved by increasing the reduction annealing temperature to ≈1200 °C was similarly characteristic of the particles modified with Sc (the coercivity reaches 11.5 kOe) and Nb (8.1 kOe), but not for the particles prepared with additional Ti where the maximum coercivity of 8.3 kOe develops for a lower annealing temperature. Furthermore, it is concluded that Sc, Nb and Zr modify the high-temperature phase equilibria of the Sm(Fe,Co) 11.2 Ti 0.8 alloys allowing for an effective high-temperature processing, whereas the alloy coercivity increases with the synthesis temperature through a different, still unknown mechanism which may involve suppression of the defects specific to the 1:12 crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Geometric control of magnetic domain morphology in electrodeposited Ni rich NiPt mesoscopic wires

In this paper, we study the electrodeposited Ni—Pt magnetic wires, exploring the mechanisms by which changes in geometry and composition influence the local magnetic structure. The samples were prepared by electrodeposition, their elemental composition was analyzed by energy dispersive X-ray spectroscopy, and phase analysis was carried out by an X-ray diffraction measurement. Magnetic force microscopy measurements, and magnetic force microscopy measurements in magnetic field were carried out to study the domain morphology of the prepared samples. Magnetization characteristics were measured via vibrating sample magnetometry mode of a superconducting quantum interference device. Here, the results were analyzed and compared with micromagnetic simulations. It is shown that a strong perpendicular magnetic anisotropy is responsible for the characteristic checkerboard-like surface magnetization patterns, which can be tuned by geometrical constriction and Ni content. Understanding these relationships provides insights into the design of magnetic materials with tailored properties for advanced applications, like magnetic sensors.

Binary alloy↗
DOE OSTI2022

In situ study on medium-range order evolution during the polyamorphous phase transition in a Pd-Ni-P nanostructured glass

Engineering multiscale structural hierarchies in glassy alloys enable a broad spectrum of potential applications. Metallic glasses were born in hierarchical structures from atomic-to-nanometer scales. However, the frozen-in structures in traditional metallic glasses prepared by rapid quenching techniques are challenging to tailor. Here, we show that a Pd 40 Ni 40 P 20 bulk nanostructured glass of polyamorphous interfacial structures was prepared by inert-gas condensation with a laser evaporation source, and its multiscale structures could be engineered. In-situ scattering experiment results reveal polyamorphous phase transitions occurred in the interfacial regions, which are accompanied by the evolution of medium-range order and the nanoscale heterogeneous structures during the condensation process of glassy nanoparticles under high pressure and the following heating process. Moreover, changes in the cluster connectivity resulting from repacking of the local ordering induced by pressure and temperature could be observed. The thermophysical and mechanical properties, including boson peaks, hardness, and elasticity modulus, could be changed as a function of heat-treatment parameters. In conclusion, our findings would shed light on the synthesis of bulk nanostructured glassy alloys with tailorable thermodynamic and dynamical behavior as well as mechanical properties based on the understanding of metastability for polyamorphous interfacial phases.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Flash electropolishing of BCC Fe and Fe-based alloys

The preparation of transmission electron microscopy (TEM) samples is a critical step in the characterization of materials, and the focused ion beam (FIB) technique is a commonly used method. However, a significant limitation of this technique is the FIB-induced damages on the foil surfaces, which can obscure the real features of interest, particularly in radiation effects studies. To overcome this limitation, this study presents a detailed description of the flash electropolishing technique, which can be used to remove the FIB damage from samples. The flash electropolishing technique has been successfully applied to a range of materials, including Fe, Fe-based model alloys, commercial Fe-Cr alloys, and advanced Fe-Cr alloys, both in their as-received and ion-irradiated states. Furthermore, the parameters used for Fe-Cr model alloys can be adjusted for commercial and advanced alloys with minimal modifications. Further, the study also examined the effects of electropolishing variables, such as perchloric acid concentration, electropolishing temperature, Cr concentration, and voltage. Qualitatively, a general trend and scoping test strategy is explored in our experiments. Overall, the flash electropolishing technique offers a promising solution to the challenges posed by FIB-induced damages in the preparation of TEM samples.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Achieving Highly Reproducible Results in Graphite-based Li-ion Full Coin Cells

Electrode materials, cathodes or anodes, are mostly evaluated in half coin cells where lithium (Li) metal is used. However, due to the instability nature of Li metal, the cycling performances of the half cells is more likely reflecting Li anode stability instead of the coupled electrodes, questioning the conclusions. Full coin cells utilizing graphite as the anode effectively assesses materials. But the key factors of preparing full coin cells with reproducible performances have rarely been discussed and overlooked leading to many inconsistent results. This work discusses the scientific gap between cell preparation and observed electrochemical performances to unveil the key parameters for achieving consistent and reliable results in full coin cells, critical for effective evaluation of any new materials tested under relevant conditions. The knowledge from this work is broadly applicable in other full cells systems such as Si-based full cells or Na-ion batteries.

Hu, Jiangtao↗
DOE OSTI2020

A highly stable Cu(OH) 2 -Poly(vinyl alcohol) nanocomposite membrane for dramatically enhanced direct borohydride fuel cell performance

Nano-additive aggregation, limited performance, and unclear modification mechanisms are the main obstacles in developing nanocomposite anion exchange membranes (AEMs). In this work, for the first time, an effective and highly stable Poly(vinyl alcohol) (PVA)-based AEMs with dispersive Cu(OH)$_2$ nanoclusters (Cu-AEMs) are prepared by a simple and eco-friendly three-step method: ‘CuCl$_2$ doping-casting-KOH immersing’. The doped Cu$^{2+}$ ions chemically combine with OH- ions to form anionic conductive Cu(OH)2 nanoclusters intermediated by attaching resins. The PVA skeletons wrap around Cu(OH)$_2$ while the hydroxyl groups expose to bulk water, forming Cu(OH)$_2$-PVA complex, which avoids nano-additive aggregation, increases anionic channels, and strengthens additive-matrix connection. A direct borohydride fuel cell using Cu-AEM with 0.56 wt % CuCl$_2$ possess the highest power density of 403.3 mW cm$^{-2}$ at 60 °C and a life span of over 200 h. The high-performance and durability come from the unique structure of Cu(OH)$_2$ nanoclusters-PVA complex. ‘Vehicle’ theory is considered to be the dominant mechanism for enhancing such nanocomposite Cu-AEMs. This work demonstrates a new concept for preparing the stable AEMs toward high-performance fuel cells. The synthetic chemistry involved can be broadly extended for fabricating versatile AEMs.

25 ENERGY STORAGE↗
DOE OSTI2022

Design of Graded Cathode Catalyst Layers with Various Ionomers for Fuel Cell Application

Proton exchange membrane fuel cells (PEMFCs) powered by green hydrogen (H2) have become a promising alternative to conventional hydrocarbon-fueled power generators. Despite technological advancements, further improvements in efficiency, durability, and low-cost production are required for the widespread adoption of PEMFCs. Though numerous approaches to improve PEMFC electrodes have been reported, most strategies utilize a single material set (e.g., one combination of catalyst and ionomer) to improve performance. Alternatively, anisotropic (graded) electrode structures with locally tunable properties may yield superior electrode performance due to improved ionic and gas phase transport. In this work, graded cathode catalyst layers (CCLs) incorporating different ionomers (Nafion D2020, Aquivion D79-25BS, and HOPI) were designed and prepared. Performance screening shows that some of these graded electrode structures have comparable performance to optimized single-ionomer electrode structures (D2020) suggesting some synergistic benefit. Additionally, we show that electrodes with lower equivalent weight (EW) D79 ionomer near the membrane and D2020 ionomer near the gas diffusion media outperformed electrodes with the inverted configuration. Finally, EIS analysis shows some graded ionomer structures (e.g. D79/D2020) have better than expected H+ conductivity, generally leading to better electrode performance. However, further optimization of ionomer content and catalyst ink formulations is needed to improve overall PEMFC performance.

DIRECT ENERGY CONVERSION↗