Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Sensitivity analysis of the space shuttle to ascent wind profiles

A parametric sensitivity analysis of the space shuttle ascent flight to the wind profile is presented. Engineering systems parameters are obtained by flight simulations using wind profile models and samples of detailed (Jimsphere) wind profile measurements. The wind models used are the synthetic vector wind model, with and without the design gust, and a model of the vector wind change with respect to time. From these comparison analyses an insight is gained on the contribution of winds to ascent subsystems flight parameters.

Smith, O. E.↗
NASA NTRS1992

The extended medium sensitivity survey distant cluster sample - X-ray data and interpretation of the luminosity evolution

The X-ray properties of a cluster of galaxies subsample of the Einstein Extended Medium Sensitivity Survey is described. A summary of this sample and its implication has been presented previously; this paper gives the full details. The cluster subsample is 98.4 percent identified and contains 93 X-ray-selected clusters to a redshift of 0.58. The cluster X-ray luminosity function at three cosmic epochs is derived. While the present luminosity function agrees with previous determinations at the lowest redshifts, it is found that the volume density of high-luminosity clusters is greater now than it was in the past. The normalization, shape, and time dependence of the luminosity function can be described by a simple hierarchical formation model with parameters which also describe the temperature function of an independent sample of low-redshift clusters. In this model the comoving hot gas density remains constant with time at least to redshifts of order 0.35.

Henry, J. P.↗
NASA NTRSDate not supplied

MISR Level 2 TOA/Cloud Albedo parameters (MIL2TCAL_V1)

The TOA/Cloud Albedo data contain albedo values, including finely-sampled or local (2.2 km) TOA albedos registered to the RLRA, and two coarsely-sampled (35.2 km resolution) TOA albedos projected to 30-km altitude. The local (2.2 km) albedos do not take the obscuration of cloud features into account, so they should only be treated as traditional albedos when the number of obscured pixels is low. The restrictive and expansive albedos are both available at 35.2 km resolution: the restrictive albedos are only calculated using the radiation upwelling from the pixel under consideration, whereas the expansive albedos use all the radiation emanating from the surrounding area. Therefore, the expansive albedo is closer to the traditional definition of top-of-atmosphere albedos. [Location=GLOBAL] [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=35.2 km; Longitude_Resolution=35.2 km; Horizontal_Resolution_Range=10 km - < 50 km or approximately .09 degree - < .5 degree; Temporal_Resolution=about 15 orbits/day].

CLOUD TEXTURE↗
NASA NTRSDate not supplied

MISR Level 2 TOA/Cloud Albedo parameters (MIL2TCAL_V2)

The TOA/Cloud Albedo data contain albedo values, including finely-sampled or local (2.2 km) TOA albedos registered to the RLRA, and two coarsely-sampled (35.2 km resolution) TOA albedos projected to 30-km altitude. The local (2.2 km) albedos do not take the obscuration of cloud features into account, so they should only be treated as traditional albedos when the number of obscured pixels is low. The restrictive and expansive albedos are both available at 35.2 km resolution: the restrictive albedos are only calculated using the radiation upwelling from the pixel under consideration, whereas the expansive albedos use all the radiation emanating from the surrounding area. Therefore, the expansive albedo is closer to the traditional definition of top-of-atmosphere albedos. [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1.1 km; Longitude_Resolution=1.1 km; Temporal_Resolution=about 15 orbits/day].

AM-1↗
DOE OSTI2025

Frequency shifts in the electron paramagnetic resonance spectrum of 39 K due to spin-exchange collisions with polarized 3 He and precise 3 He polarimetry

The Zeeman splittings and electron paramagnetic resonance frequencies of alkali-metal atoms are shifted in the presence of a polarized noble gas. For a spherical geometry, the shift is enhanced over what is expected classically by a dimensionless atomic parameter 𝜅 0 that is unique to each alkali-metal-atom–noble-gas pair. Here, we present a precise measurement of 𝜅 0 for the 39 K − 3 He system with a relative accuracy of better than 1%. A critical component of achieving subpercent accuracy involved characterizing the shape of our samples using both MRI and CT medical-imaging techniques. The parameter 𝜅 0 plays an important role in establishing the absolute polarization of 3 He in a variety of contexts, including polarized targets for electron-scattering experiments and MRI of the gas space of the lungs. Our measurement more than doubles the accuracy possible when using 𝜅 0 for polarimetry purposes. Just as important, the work presented here represents a direct measurement of 𝜅 0 for the 39 K − 3 He system; previous values for 𝜅 0 in the 39 K − 3 He system relied on a chain of measurements that were benchmarked by previous measurements of 𝜅 0 in the Rb- 3 He system.

Zeeman effect↗
DOE OSTI2021

Cosmological constraints from unWISE and Planck CMB lensing tomography

A number of recent, low-redshift, lensing measurements hint at a universe in which the amplitude of lensing is lower than that predicted from the ΛCDM model fit to the data of the Planck CMB mission. Here we use the auto- and cross-correlation signal of unWISE galaxies and Planck CMB lensing maps to infer cosmological parameters at low redshift. In particular, we consider three unWISE samples (denoted as "blue", "green" and "red") at median redshifts z ~ 0.6, 1.1 and 1.5, which fully cover the Dark Energy dominated era. Our cross-correlation measurements, with combined significance S/N ~ 80, are used to infer the amplitude of low-redshift fluctuations, σ 8 ; the fraction of matter in the Universe, Ω m ; and the combination S 8 ≡ σ 8 (Ω m /0.3) 0.5 to which these low-redshift lensing measurements are most sensitive. The combination of blue, green and red samples gives a value S m = 0.784 ± 0.015, that is fully consistent with other low-redshift lensing measurements and in 2.4σ tension with the CMB predictions from Planck. Finally, this is noteworthy, because CMB lensing probes the same physics as previous galaxy lensing measurements, but with very different systematics, thus providing an excellent complement to previous measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A comparative study of the physical properties for a representative sample of Narrow and Broad-line Seyfert galaxies

ABSTRACT We present a comparative study of the physical properties of a homogeneous sample of 144 Narrow line Seyfert 1 (NLSy1) and 117 Broad-line Seyfert 1 (BLSy1) galaxies. These two samples are in a similar luminosity and redshift range and have optical spectra available in the 16th data release of Sloan Digital Sky Survey (SDSS-DR16) and X-ray spectra in either XMM-NEWTON or ROSAT. Direct correlation analysis and a principal component analysis (PCA) have been performed using ten observational and physical parameters obtained by fitting the optical spectra and the soft X-ray photon indices as another parameter. We confirm that the established correlations for the general quasar population hold for both types of galaxies in this sample despite significant differences in the physical properties. We characterize the sample also using the line shape parameters, namely the asymmetry and kurtosis indices. We find that the fraction of NLSy1 galaxies showing outflow signatures, characterized by blue asymmetries, is higher by a factor of about 3 compared to the corresponding fraction in BLSy1 galaxies. The presence of high iron content in the broad-line region of NLSy1 galaxies in conjunction with higher Eddington ratios can be the possible reason behind this phenomenon. We also explore the possibility of using asymmetry in the emission lines as a tracer of outflows in the inner regions of Active Galactic Nuclei. The PCA results point to the NLSy1 and BLSy1 galaxies occupying different parameter spaces, which challenges the notion that NLSy1 galaxies are a subclass of BLSy1 galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Stellar multiplicity and stellar rotation: insights from APOGEE

ABSTRACT We measure rotational broadening in spectra taken by the Apache Point Observatory Galactic Evolution Experiment (APOGEE) survey to characterize the relationship between stellar multiplicity and rotation. We create a sample of 2786 giants and 24 496 dwarfs with stellar parameters and multiple radial velocities from the APOGEE pipeline, projected rotation speeds vsin i determined from our own pipeline, and distances, masses, and ages measured by Sanders & Das. We use the statistical distribution of the maximum shift in the radial velocities, ΔRVmax, as a proxy for the close binary fraction to explore the interplay between stellar evolution, rotation, and multiplicity. Assuming that the minimum orbital period allowed is the critical period for Roche Lobe overflow and rotational synchronization, we calculate theoretical upper limits on expected vsin i and ΔRVmax values. These expectations agree with the positive correlation between the maximum ΔRVmax and vsin i values observed in our sample as a function of log(g). We find that the fast rotators in our sample have a high occurrence of short-period [log(P/d) ≲ 4] companions. We also find that old, rapidly rotating main-sequence stars have larger completeness-corrected close binary fractions than their younger peers. Furthermore, rapidly rotating stars with large ΔRVmax consistently show differences of 1–10 Gyr between the predicted gyrochronological and measured isochronal ages. These results point towards a link between rapid rotation and close binarity through tidal interactions. We conclude that stellar rotation is strongly correlated with stellar multiplicity in the field, and caution should be taken in the application of gyrochronology relations to cool stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

SURFACE ROUGHNESS REDUCTION AND PERFORMANCE OF Nb3Sn FILM FOR SRF APPLICATIONS

Nb3Sn offers better RF performance (Q and Eacc) than Nb at any given temperature because of its superior superconducting properties. The potential deployment of Nb3Sn-coated SRF cavities at 4 K, delivering similar performance to that of Nb cavities at 2 K, will be a transformational technology to enable new classes of SRF accelerator applications. A clean and smooth surface can enhance the performance of the Nb3Sn-coated cavity, typically, the attainable acceleration gradient. The reduction of surface roughness is often linked with a correlative reduction in average coating thickness and grain size. A new approach to enhance the nucleation centers using the pre-deposition of Sn on Nb is introduced for surface roughness reduction. Besides Sn supply's careful tuning, the temperature profiles were varied to engineer the coating surface with reduced roughness as low as ~40 nm in 20 µm × 20 µm AFM scans, one-third that of the typical coating. Electropolishing of coated sample shows surface a clear surface smoothening. A few sets of coating parameters were used to coat 1.3 GHz sin-gle-cell cavities to understand the effects of roughness variation on the RF performance. This presentation discusses ways to reduce surface roughness with results from a systematic analysis of the samples and Nb3Sn-coated single-cell cavities.

Pudasaini, Uttar↗
DOE OSTI2023

SURFACE ROUGHNESS REDUCTION AND PERFORMANCE OF Nb3Sn FILM FOR SRF APPLICATIONS

Nb3Sn offers better RF performance (Q and Eacc) than Nb at any given temperature because of its superior superconducting properties. The potential deployment of Nb3Sn-coated SRF cavities at 4 K, delivering similar performance to that of Nb cavities at 2 K, will be a transformational technology to enable new classes of SRF accelerator applications. A clean and smooth surface can enhance the performance of the Nb3Sn-coated cavity, typically, the attainable acceleration gradient. The reduction of surface roughness is often linked with a correlative reduction in average coating thickness and grain size. A new approach to enhance the nucleation centers using the pre-deposition of Sn on Nb is introduced for surface roughness reduction. Besides Sn supply's careful tuning, the temperature profiles were varied to engineer the coating surface with reduced roughness as low as ~40 nm in 20 µm × 20 µm AFM scans, one-third that of the typical coating. Electropolishing of coated sample shows surface a clear surface smoothening. A few sets of coating parameters were used to coat 1.3 GHz sin-gle-cell cavities to understand the effects of roughness variation on the RF performance. This presentation discusses ways to reduce surface roughness with results from a systematic analysis of the samples and Nb3Sn-coated single-cell cavities.

Pudasaini, Uttar↗
DOE OSTI2023

Comparison of residual dose rates from MARS and DORIAN simulations with experimental data from the SINBAD database

This benchmarking study aims to compare residual dose rate predictions from the MARS and DORIAN codes with experimental measurements taken from samples irradiated at CERN's CERF facility. The research evaluates the residual dose rates of these samples over varied cooling intervals. Additionally, it delves into the influence of parameter choices, such as specific physics processes and energy thresholds, on the production and transport of particles and their effects on simulation outcomes. While both MARS and DORIAN largely align with experimental findings, discrepancies were observed in the copper sample. This prompted an in-depth examination of the elevated dose rates from MARS.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2019

Bayesian Estimation of Earth’s Undiscovered Mineralogical Diversity Using Noninformative Priors

Recently, statistical distributions have been explored to provide estimates of the mineralogical diversity of Earth, and Earth-like planets. In this paper, a Bayesian approach is introduced to estimate Earth’s undiscovered mineralogical diversity. Samples are generated from a posterior distribution of the model parameters using Markov chain Monte Carlo simulations such that estimates and inference are directly obtained. It was previously shown that the mineral species frequency distribution conforms to a generalized inverse Gauss–Poisson (GIGP) large number of rare events model. Even though the model fit was good, the population size estimate obtained by using this model was found to be unreasonably low by mineralogists. In this paper, several zero-truncated, mixed Poisson distributions are fitted and compared, where the Poisson-lognormal distribution is found to provide the best fit. Subsequently, the population size estimates obtained by Bayesian methods are compared to the empirical Bayes estimates. Species accumulation curves are constructed and employed to estimate the population size as a function of sampling size. Finally, the relative abundances, and hence the occurrence probabilities of species in a random sample, are calculated numerically for all mineral species in Earth’s crust using the Poisson-lognormal distribution. These calculations are connected and compared to the calculations obtained in a previous paper using the GIGP model for which mineralogical criteria of an Earth-like planet were given.

Bayesian statistics↗
NASA NTRS2003

Pore Formation and Mobility Investigation (PPMI): Description and Initial Analysis of Experiments Conducted aboard the International Space Station

Flow visualization experiments during the controlled directional melt back and re-solidification of succinonitrile (SCN) and SCN-water mixtures were conducted using the Pore Formation and Mobility Investigation (PFMI) apparatus in the glovebox facility (GBX) aboard the International Space Station. The study samples were initially 'cast' on earth under 450 millibar of nitrogen into 1 cm ID glass sample tubes approximately 30 cm in length, containing 6 in situ thermocouples. During the Space experiments, the processing parameters and flow visualization settings are remotely monitored and manipulated from the ground Telescience Center (TSC). The ground solidified sample is first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Bubbles of different sizes are seen to initiate at the melt interface and, upon release from the melting solid, translate at different speeds in the temperature field ahead of them before coming to rest. Over a period of time these bubbles dissolve into the melt. The gas-laden liquid is then directionally solidified in a controlled manner, generally starting at a rate of 1 micron /sec. Observation and preliminary analysis of bubble formation and mobility in pure SCN samples during melt back and the subsequent structure resulting during gas generation upon re-solidification are presented and discussed.

Grugel, R. N.↗
NASA NTRS2002

Pore Formation and Mobility Investigation (PFMI): Description and Initial Analysis of Experiments Conducted aboard the International Space Station

Flow visualization experiments during the controlled directional melt back and re-solidification of succinonitrile (SCN) and SCN-water mixtures were conducted using the Pore Formation and Mobility Investigation (PFMI) apparatus in the glovebox facility (GBX) aboard the International Space Station. The study samples were initially "cast" on earth under 450 millibar of nitrogen into 1 cm ID glass sample tubes approximately 30 cm in length, containing 6 in situ thermocouples. During the Space experiments, the processing parameters and flow visualization settings are remotely monitored and manipulated from the ground Telescience Center (TSC). The ground solidified sample is first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Bubbles of different sizes are seen to initiate at the melt interface and, upon release from the melting solid, translate at different speeds in the temperature field ahead of them before coming to rest. Over a period of time these bubbles dissolve into the melt. The gas-laden liquid is then directionally solidified in a controlled manner, generally starting at a rate of 1 micron /sec. Observation and preliminary analysis of bubble formation and mobility in pure SCN samples during melt back and the subsequent structure resulting during gas generation upon re-solidification are presented and discussed.

Grugel, R. N.↗
NASA NTRS2001

Low-Latitude Solar Wind During the Fall 1998 SOHO-Ulysses Quadrature

The Fall 1998 SOlar-Heliospheric Observatory (SOHO) - Ulysses quadrature occurred when Ulysses was at 5.2 AU, 17.4 deg South of the equator, and off the West line of the Sun. SOHO coronal observations, at heliocentric distances of a few solar radii, showed that the line through the solar center and Ulysses crossed, over the first days of observations, a dark, weakly emitting area and through the northern edge of a streamer complex during the second half of the quadrature campaign. Ulysses in situ observations showed this transition to correspond to a decrease from higher speed wind typical of coronal hole flow to low speed wind. Physical parameters (density, temperature, flow speed) of the low latitude coronal plasma sampled over the campaign are determined using constraints from what is the same plasma measured later in situ and simulating the intensities of the Hydrogen Lyman-alpha and OVI 1032 and 1037 Angstrom lines, measured by the Ultra Violet Coronagraph Spectrometer (UVCS) on SOHO. The densities, temperatures and outflow speed are compared with the same characteristic flow parameters for high-latitude fast wind streams and typical slow solar wind.

Poletto, G.↗
DOE OSTI2024

Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing

Ongoing research in additive manufacturing towards structural and industrial application has led to the use of commingled roving as a manufacturing feedstock for printing high fiber volume fraction composites. The prospects of using this technology for high performance applications necessitates the need for a comprehensive experimental investigation into the effects of processing parameters on the quality of an additively manufactured composite printed from commingled roving feedstock. Here, in this work, transverse flexure and void fraction matrix pyrolysis testing are both performed to evaluate composite quality. The transverse flexure test is a testing approach that evaluates the quality of the interfacial fiber-matrix bond while the void fraction test estimates the void content in the printed composite. A full observational study consisting of 27 different test combinations is done to investigate the effects of three different process parameters namely, temperature, pressure, and print speed across three different levels. Composite samples were made from commingled roving of E-glass and amorphous PET using an in-house built continuous fiber composite digital manufacturing system. Least squares regression analysis is performed to study the main, interaction and quadratic effects of process parameters. A statistical regression model having an R2 adjusted value of 80.1% is generated from the transverse flexure study, which is used to explain main and interaction effects and also predict performance. Response surface plots are also generated and are used to optimize process parameters which can subsequently be of help in scaling up composite manufacturing. Results show that all three process parameters are highly statistically significant at the 0.01 level of significance. Pressure * Temperature and Pressure * Printspeed are significant interaction terms. Pressure plays a weightier role when print speed is increased or temperature is decreased as it closes more voids that would ordinarily have been introduced because of drop in polymer melt viscosity. Micrographic analysis is also performed.

36 MATERIALS SCIENCE↗
NASA NTRS1983

The Einstein observatory medium sensitivity survey - The quasars sample

A complete sample of X-ray-selected quasars and Seyfert galaxies extracted from the Einstein Observatory Medium Sensitivity Survey is described, and their physical characteristics are discussed. A Hubble constant of 50 km/s per Mpc and a Friedmann universe with a deceleration parameter of q(0)=0 are assumed throughout the survey, and the sample of X-ray sources was selected according to the following criteria: the significance of the detection exceeds a confidence level of 5 beta; the source is physically unrelated to the target of the IPC observation; and that the source is at a galactic latitude higher than 20 deg. The redshift and optical luminosity distributions of 55 Active Galactic Nuclei (AGNs) detected in the survey are discussed. A number flux relation for the different classes of extragalactic objects are analyzed in detail, using a Maximum Likelihood method and the assumption that the relation can be represented as a power law.

Gioia, I. M.↗
NASA NTRS1991

Constitutive parameter extraction for heated materials

The focus is the determination of the electrical constitutive paramaters of materials with general complex epsilon and mu values at elevated temperatures. Measurement fixtures and techniques are evaluated for frequencies between 8 and 12 GHz using a rectangular waveguide with the sample completely filling the fixture. Three different measurement techniques are evaluated to obtain the necessary measured quantities for parameter extraction. The most desirable technique used two reflection measurements from material samples of different thickness backed with a short. Temperatures up to 600 F were investigated.

Munk, J.↗