SEARCH · Engineering Papers
Results for “online”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Data-Driven Cyber-Attack Detection for PV Farms via Time-Frequency Domain Features
The internetworking of grid-connected power electronics converters (PECs) in photovoltaic (PV) farms has inevitably expanded the cyber-attack surfaces. Here this paper presents a comprehensive study on cyber-attack detection and diagnosis for PEC-enabled PV farms via single waveform sensor to distinguish between normal conditions, open-circuit faults, short-circuit faults, and cyber-attacks. To our knowledge, this has not been attempted before. Firstly, we propose frequency-domain magnitude-based residuals to identify short-circuit faults and a time-domain mean current vector-based feature to distinguish open-circuit faults from other threats. These features can fully reflect the specific physical characteristics of PV farms during threat duration. Secondly, unlike micro phasor measurement units (µPMU) and raw electric waveform-based methods, the proposed innovative features can address novel cyber-attacks that are excluded from the training process. Thirdly, an online hardware-in-the-loop (HIL) testbed using the OPAL-RT real-time digital simulator has verified the effectiveness. The monitoring system runs in real-time while using HIL as an operational solar farm and a National Instruments (NI) data acquisition card as the electric waveform sensor at the point of coupling.
Real-Time Distribution System State Estimation with Asynchronous Measurements
We report state estimation is a fundamental task in power systems. Although distribution systems are increasingly equipped with sensing devices and smart meters, measurements are typically reported at different rates and asynchronously; these aspects pose severe strains on workhorse state estimation algorithms, which are designed to process batches of data collected in a synchronous manner from all the measurement units. In this paper, we develop a novel state estimation algorithm to continuously update the estimate of the state based on measurements received in an asynchronous manner from measurement units. The synthesis of the algorithm hinges on a proximal-point type method, implemented in an online fashion, and capable of processing measurements received sequentially from sensors. A performance analysis is presented by providing bounds on the estimation error in terms of the mean and variance that hold at each iteration and asymptotically. The scheme is also compared with a more traditional Weighted Least Squares estimator that compensates for the lack of measurement data by using, as pseudo measurements, the measurement retrieved during a certain time window. Numerical simulations on the IEEE 37-bus feeder corroborate the analytical findings.
Attention Enabled Multi-Agent DRL for Decentralized Volt-VAR Control of Active Distribution System Using PV Inverters and SVCs
This paper proposes attention enabled multi-agent deep reinforcement learning (MADRL) framework for active distribution network decentralized Volt-VAR control. Using the unsupervised clustering, the whole distribution system can be decomposed into several sub-networks according to the voltage and reactive power sensitivity relationships. Then, the distributed control problem of each sub-network is modeled as Markov games and solved by the improved MADRL algorithm, where each sub-network is modeled as an adaptive agent. An attention mechanism is developed to help each agent focus on specific information that is mostly related to the reward. All agents are centrally trained offline to learn the optimal coordinated Volt-VAR control strategy and executed in a decentralized manner to make online decisions with only local information. Compared with other distributed control approaches, the proposed method can effectively deal with uncertainties, achieve fast decision makings, and significantly reduce the communication requirements. Comparison results with model-based and other data-driven methods on IEEE 33-bus and 123-bus systems demonstrate the benefits of the proposed approach.
Reinforcement Learning for Load-balanced Parallel Particle Tracing
We explore an online reinforcement learning (RL) paradigm to dynamically optimize parallel particle tracing performance in distributed-memory systems. Our method combines three novel components: (1) a work donation algorithm, (2) a high-order workload estimation model, and (3) a communication cost model. First, we design an RL-based work donation algorithm. Our algorithm monitors workloads of processes and creates RL agents to donate data blocks and particles from high-workload processes to low-workload processes to minimize program execution time. The agents learn the donation strategy on the fly based on reward and cost functions designed to consider processes' workload changes and data transfer costs of donation actions. Second, we propose a workload estimation model, helping RL agents estimate the workload distribution of processes in future computations. Third, we design a communication cost model that considers both block and particle data exchange costs, helping RL agents make effective decisions with minimized communication costs. We demonstrate that our algorithm adapts to different flow behaviors in large-scale fluid dynamics, ocean, and weather simulation data. Our algorithm improves parallel particle tracing performance in terms of parallel efficiency, load balance, and costs of I/O and communication for evaluations with up to 16,384 processors.
Real-Time Implementation of Smart Wireless Charging of On-Demand Shuttle Service for Demand Charge Mitigation
This paper presents a smart charge management strategy for an on-demand electric shuttle operating at the National Renewable Energy Laboratory (NREL) campus and supported by an inductive charger at the vehicle's waiting spot. A new control algorithm has been proposed for mitigating the demand charges incurred from the wireless charger. It monitors the shuttle, wireless charger, renewable energy generation, and other loads and regulates charging behavior for demand charge mitigation. Within the control algorithm, an energy prediction is made to estimate the mobility needs of the vehicle and maintain uninterrupted service during operation while still minimizing peak demand. The proposed controller is designed and optimized using a Simulink model for the entire system. It is then implemented and tested in real time at the NREL campus using online cloud services. Two vehicle-use cases' charge-sustaining and charge-depletion operation' are tested under different campus power profiles and drive cycles to assess the controller's performance. In this work, the proposed controller showed a robust performance under different driving scenarios, with high correlation between simulation and experimental data. The results show that proper demand response can be achieved, with an average of 94% reduction of charging loads during peak demand events.
VDiSC: An Open Source Framework for Distributed Smart City Vision and Biometric Surveillance Networks
Recent global growth in the interest of smart cities has led to trillions of dollars of investment toward research and development. These connected cities have the potential to create a symbiosis of technology and society and revolutionize the cost of living, safety, ecological sustainability, and quality of life of societies on a world-wide scale. Some key components of the smart city construct are connected smart grids, self-driving cars, federated learning systems, smart utilities, large-scale public transit, and proactive surveillance systems. While exciting in prospect, these technologies and their subsequent integration cannot be attempted without addressing the potential societal impacts of such a high degree of automation and data sharing. Additionally, the feasibility of coordinating so many disparate tasks will require a fast, extensible, unifying framework. To that end, we propose the Distributed Smart City framework for Vision, or VDiSC. VDiSC serves as a unified biometric API harness that allows for seamless evaluation, deployment, and simple pipeline creation for heterogeneous biometric software. VDiSC additionally provides a fully declarative capability for defining and coordinating custom machine learning and sensor pipelines, allowing the distribution of processes across otherwise incompatible hardware and networks. VDiSC ultimately provides a way to quickly configure, hot-swap, and expand large coordinated or federated systems online without interruptions for maintenance. Because much of the data collected in a smart city contains Personally Identifying Information (PII), VDiSC also provides built-in tools and layers to ensure secure and encrypted streaming, storage, and access of PII data across distributed systems.
Emerging Frameworks for Advancing Scientific Workflows Research, Development, and Education
Lightning talks of the Workflows in Support of Large-Scale Science (WORKS) workshop are a venue where the workflow community (researchers, developers, and users) can discuss work in progress, emerging technologies and frameworks, and training and education materials. This paper summarizes the WORKS 2021 lightning talks, which cover four broad topics: (i) libEnsemble, a Python library to coordinate the concurrent evaluation of dynamic ensembles of calculations; (ii) Edu WRENCH, a set of online pedagogic modules that provides simulation-driven hands-on activity in the browser; (iii) VisDict, an envisioned visual dictionary framework that will translate terms, jargon, and concepts between research domains and workflow providers; and (iv) Pegasus Kickstart, a lightweight tool for capturing workflow tasks' performance, including performance metrics from Nvidia GPUs.
Evaluating the potential for bird‐habitat models to support biodiversity‐friendly urban planning
Abstract Urban expansion poses a major threat to wildlife populations. Biodiversity‐friendly urban landscapes could deliver benefits for both wildlife and people, by incorporating conservation and ecosystem services objectives. Well‐designed urban developments could also soften the ecological impacts of urbanization. However, delivering urban landscapes that integrate biodiversity requirements effectively remains challenging. Ecological models, designed to predict wildlife population responses to alternative urban designs, could prove effective in supporting the creation of biodiversity‐friendly urban landscapes. Here, we combine national‐scale bird abundance data with high resolution, spatially explicit habitat data to characterize relationships between bird densities and urban landscape form in Britain. From these analyses and cross validation, we evaluate the potential for well‐parameterized, species‐specific models to be used to predict bird densities in novel or modified urban areas. Our analyses indicate that responses of bird abundance to urban habitat are species‐specific and complex, with few variables consistently affecting a large proportion of species. However, contiguous areas of greenspace within urban sites are preferential for accommodating breeding birds, compared to a more fragmented arrangement of multiple, small greenspace patches. In combination, the bird‐habitat relationships identified could successfully predict observed variation in abundance for most bird species considered. Further evaluation of habitat descriptor variables, spatial scales of species' habitat use and analytical modelling approaches may be needed to improve the predictive ability of bird‐habitat models for certain species, particularly waterbirds and those observed less frequently in urban areas. Synthesis and applications . We modelled breeding bird abundance in built‐up areas with respect to the characteristics and contexts of urban environments. While most variables were important for multiple species, responses overall were species‐specific, so simple assemblage metrics, like diversity, will not describe the variation in bird communities well. However, the results illustrate the potential of an evidence‐based, spatially explicit evaluation of urban development impacts on biodiversity, by predicting the consequences for bird numbers. Subject to verification of predictive ability, practitioners can apply the models to compare, for example, land‐sparing and sharing within developments, or to quantify the biodiversity requirements for effective offsetting. This would be facilitated by incorporation into an online tool allowing user‐determined input scenarios.
Characterization and differentiation of aluminum powders used in improvised explosive devices. Part 2: Micromorphometric method refinement and preliminary statistical analysis
Abstract Aluminum (Al) powder is commonly encountered in improvised explosive devices (IEDs) as a metallic fuel due to its availability and low cost. Although available commercially in powder form, amateur bomb‐makers also produce their own Al powder via simple methods found online. In order to provide investigative leads and forensic intelligence, it is important to evaluate not only the composition of homemade devices, but also to distinguish between the various forms of Al powder they contain. To achieve this goal, a method using automated microscopy in combination with statistical techniques has been demonstrated to have the potential to provide source discrimination and investigative leads in source attribution of Al powders in IEDs. The present research refined this method and investigated 59 industrially and amateurly produced Al powder sources with seven subsamples per source using two traditional linear discriminant analyses (LDA), one with a standard data split for training and testing, and another using leave‐one‐out cross‐validation. Averaging the classification accuracies for the two LDA‐based analyses, LDA has the ability to correctly classify 59.26%, 83.35%, and 80.69% of the samples based on their powder source, type, and production method, respectively. This classification accuracy represents a 3407%, 317%, and 61.38% increase in accuracy from random class assignment, respectively. Further, in most instances of incorrect data attribution to a particular source, the subsample has been misidentified with another sample of the same powder type or production method.
Not just for programmers: How GitHub can accelerate collaborative and reproducible research in ecology and evolution
Abstract Researchers in ecology and evolutionary biology are increasingly dependent on computational code to conduct research. Hence, the use of efficient methods to share, reproduce, and collaborate on code as well as document research is fundamental. GitHub is an online, cloud‐based service that can help researchers track, organize, discuss, share, and collaborate on software and other materials related to research production, including data, code for analyses, and protocols. Despite these benefits, the use of GitHub in ecology and evolution is not widespread. To help researchers in ecology and evolution adopt useful features from GitHub to improve their research workflows, we review 12 practical ways to use the platform. We outline features ranging from low to high technical difficulty, including storing code, managing projects, coding collaboratively, conducting peer review, writing a manuscript, and using automated and continuous integration to streamline analyses. Given that members of a research team may have different technical skills and responsibilities, we describe how the optimal use of GitHub features may vary among members of a research collaboration. As more ecologists and evolutionary biologists establish their workflows using GitHub, the field can continue to push the boundaries of collaborative, transparent, and open research.
Imaginaries of the Pandemic in Chile: A Conceptual‐Empirical Discussion
This article aims to reconstruct the social imaginaries of Coronavirus disease 2019 (COVID‐19) in Chile. We seek to understand how families interpret their experience confronting the pandemic by identifying four main aspects: (a) the COVID‐19 pandemic, (b) working and learning, (c) health and (d) family life. Following Habermas' distinction between lifeworld and social systems, we consider these issues as constituting the social imaginary of lifeworld, different but related to the imaginaries of social systems. The qualitative empirical data was gathered through a sample of 38 families interviewed online between September 2020 and January 2021 in four Chilean cities: Iquique, Valparaíso, Santiago and Concepción. Other complementary sources of information are multimodal ethnography (digital diaries), press articles and state reports.
A historical and comparative review of 50 years of root data collection in Puerto Rico
Fine roots play an important role in plant nutrition, as well as in carbon, water, and nutrient cycling. Fine roots account for a third of terrestrial net primary production (NPP), and inclusion of their structure and function in global carbon models should improve predictions of ecosystem responses to climate change. However, studies focusing on underground plant components are much less frequent than those on aboveground structure. This is more marked in the tropics, where one-third of the planet's terrestrial NPP is produced. Some tropical forests have been more represented in the literature than others, as demonstrated in the collective studies in Puerto Rico. This Caribbean island's biodiversity, frequency of natural disturbances, ease of access to forests, and long-term plots have created an ideal place for the study of tropical ecological processes. This review of the literature emphasizes 50 years of root research and patterns revealed around Puerto Rico. The data in this review were compiled from scientific publications, conference reports, symposiums, and raw data shared by some researches. Emergent patterns include the shallow distribution of fine roots, the great variation in root biomass among different forest types, little variation in root phosphorus concentrations, the slow recovery of root biomass after Hurricane Hugo, and the fact that most data on roots come from the wet tropical Luquillo Experimental Forest, causing other habitat types to be underrepresented. This review also shows the gaps in knowledge about fine roots in the island's ecosystems, which should be used to promote and guide future studies. Abstract in Spanish is available with online material.
Beyond MAP: A guide to dimensions of rainfall variability for tropical ecology
Not provided.
Patterns and controls on island‐wide aboveground biomass accumulation in second‐growth forests of Puerto Rico
Abstract Understanding the heterogeneity of biomass accumulation in second‐growth tropical forests following land use abandonment is important for informing ecosystem carbon models and forest restoration efforts. There is an urgent need for a broad sample of second‐growth forests to enhance our knowledge of carbon accumulation in human‐dominated landscapes, especially for older forests. Puerto Rico has predominantly second‐growth forests, ranging in age from approximately 25 to more than 80 years. We used an island‐wide sample of airborne lidar from the NASA Goddard Lidar, Hyperspectral, and Thermal (G‐LiHT) Airborne Imager collected on March 2017, forest inventory data, and data on forest age, precipitation, soils, and land use to estimate aboveground biomass stocks in moist and wet, second‐growth tropical forests. Biomass accumulation rates in Puerto Rico were lower, on average, than in other Neotropical forests. Median biomass across >16,700 ha of older second‐growth forests was 105 Mg ha −1 , and sampled biomass rarely surpassed 250 Mg ha −1 . Differences in biomass by age were large and persistent across different substrates and land uses, with a plateau in the pattern of island‐wide biomass accumulation after about 33 years. A spatial regression model showed that multiple factors were related to biomass accumulation, including time since abandonment, geologic substrate, past land use as coffee or pasture, precipitation, topographic wetness index, and slope. Our findings have important consequences for the total carbon storage and expected climate mitigation benefits of large‐scale reforestation efforts, and highlight the value of airborne lidar for quantifying biomass variability in complex tropical landscapes. Abstract in Spanish is available with online material.
Canopy tree mortality depends on the proportion of crown exposed to sunlight, but this effect varies with species' wood density
Abstract Understanding what drives changes in tree mortality as well as the covariates influencing trees' response is a research priority to predict forest responses to global change. Here, we combined drone photogrammetry and ground‐based data to assess the influence of crown exposure to light (relative to total crown area), growth deviations (relative to conspecifics), tree size, and species' wood density (as a surrogate for light‐demanding and shade‐tolerant life‐history strategies) on the mortality of 984 canopy trees in an Amazonterra firmeforest. Trees with lower wood density were less prone to die when their proportion of crown was more exposed to sunlight, but this relationship with relative crown exposure weakened and slightly reversed as wood density increased. Trees growing less than their species average had higher mortality, especially when the species' wood density decreased. The role of wood density in determining the survival of canopy trees under varying light conditions indicates differential responses of light‐demanding versus shade‐tolerant species. Our results highlight the importance of accounting for life‐history strategies, via plant functional types, in vegetation dynamic models aiming to predict forest demography under a rapidly changing climate. Abstract in Spanish is available with online material.
Clinical practice gaps and challenges in non‐alcoholic steatohepatitis care: An international physician needs assessment
Abstract Background and aims Even as several pharmacological treatments for non‐alcoholic steatohepatitis (NASH) are in development, the incidence of NASH is increasing on an international scale. We aim to assess clinical practice gaps and challenges of hepatologists and endocrinologists when managing patients with NASH in four countries (Germany/Italy/United Kingdom/United States) to inform educational interventions. Methods A sequential mixed‐method design was used: qualitative semi‐structured interviews followed by quantitative online surveys. Participants were hepatologists and endocrinologists practising in one of the targeted countries. Interview data underwent thematic analysis and survey data were analysed with chi‐square and Kruskal‐Wallis tests. Results Most interviewees ( n = 24) and surveyed participants (89% of n = 224) agreed that primary care must be involved in screening for NASH, yet many faced challenges involving and collaborating with them. Endocrinologists reported low knowledge of which blood markers to use when suspecting NASH (56%), when to order an MRI (65%) or ultrasound/FibroScan® (46%), and reported sub‐optimal skills interpreting alanine aminotransferase (ALT, 37%) and aspartate aminotransferase (AST, 38%) blood marker test results, causing difficulty during diagnosis. Participants believed that more evidence is needed for upcoming therapeutic agents; yet, they reported sub‐optimal knowledge of eligibility criteria for clinical trials. Knowledge and skill gaps when managing comorbidities, as well as skill gaps facilitating patient lifestyle changes were reported. Conclusions Educational interventions are needed to address the knowledge and skill gaps identified and to develop strategies to optimize patient care, which include implementing relevant care pathways, encouraging referrals and testing, and multidisciplinary collaboration, as suggested by the recent Global Consensus statement on NAFLD.
Increased adaxial stomatal density is associated with greater mesophyll surface area exposed to intercellular air spaces and mesophyll conductance in diverse C 4 grasses
Summary Mesophyll conductance ( g m ) is the diffusion of CO 2 from intercellular air spaces ( IAS ) to the first site of carboxylation in the mesophyll cells. In C 3 species, g m is influenced by diverse leaf structural and anatomical traits; however, little is known about traits affecting g m in C 4 species. To address this knowledge gap, we used online oxygen isotope discrimination measurements to estimate g m and microscopy techniques to measure leaf structural and anatomical traits potentially related to g m in 18 C 4 grasses. In this study, g m scaled positively with photosynthesis and intrinsic water‐use efficiency ( TE i ), but not with stomatal conductance. Also, g m was not determined by a single trait but was positively correlated with adaxial stomatal densities ( SD ada ), stomatal ratio ( SR ), mesophyll surface area exposed to IAS ( S mes ) and leaf thickness. However, g m was not related to abaxial stomatal densities ( SD aba ) and mesophyll cell wall thickness ( T CW ). Our study suggests that greater SD ada and SR increased g m by increasing S mes and creating additional parallel pathways for CO 2 diffusion inside mesophyll cells. Thus, SD ada , SR and S mes are important determinants of C 4 ‐ g m and could be the target traits selected or modified for achieving greater g m and TE i in C 4 species.