Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Probing rutile solid-phase crystallization of atomically mixed Mn-alloyed TiO 2 coatings through XANES analysis

Phase transformation via dopant introduction is an emerging strategy for tuning the electronic and catalytic properties of oxides. However, developing a general theory of ternary alloys and their microstructure evolution remains challenging due to the knowledge gaps in how point defects such as dopants lead to the formation of complex or metastable phases. We investigate the influence of Mn concentration and annealing temperature on the microstructure evolution of amorphous Mn-alloyed TiO 2 synthesized via Atomic Layer Deposition. In conclusion, our findings reveal a new crystallization pathway resulting in a direct amorphous TiO 2 to rutile transformation without an intermediate anatase phase and our multi-parameter thermal processing conditions show potential for AI-assisted data acquisition and analysis for studying complex oxide coatings.

36 MATERIALS SCIENCE↗

Intrinsic Halide Immiscibility in 2D Mixed-Halide Ruddlesden–Popper Perovskites

Halide alloying of 3D and 2D Ruddlesden–Popper lead halide perovskites (RPPs) allows their bandgaps to be fine-tuned for optoelectronic applications. Many studies of mixed-halide RPPs assume that halide mixing yields homogeneous alloys like in 3D lead halide perovskites, with halide segregation only occurring under perturbations like light or heat. Here we carefully investigate the mixed I/Br phases in solution grown microplates of three representative n = 1 and n = 2 RPP phases to reveal heterogeneous halide microscale domains – even in absence of photoinduced phase separation. Such halide immiscibility is revealed by X-ray diffraction and heterogeneity is confirmed by secondary ion mass spectrometry (SIMS) imaging, however, comparison with photoluminescence (PL) imaging results show how PL information alone can falsely imply homogeneous alloy formation in heterogeneous RPPs. Finally, we then demonstrate the use of spectral imaging as an alternative high-throughput tool for accurate halide phase characterization in mixed-halide RPPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Study of the Formation of Silicide Phases in Amorphous Co–Si Mixed Layers

We investigate Co silicide phase formation when extra Si is added within an as deposited 50 nm Co film. The addition of Si is investigated for both the Co/SiO{sub 2} and Co/Si(1 0 0) system. A series of 10 Co-Si mixed films with a Si content varying from 21 to 59 at.% was prepared and investigated during annealing with in situ X-ray diffraction. The oxide system is used as reference system to identify phases that initially crystallize in an amorphous mixture of a given composition. Multiple phases can nucleate, and the temperature of crystallization depends on the Co-Si atomic ratio. Upon heating of the Co(Si)/Si system, the first reaction is a similar crystallization reaction of the Co(Si) mixture. Once the first phase is formed, one has the normal system of a silicide phase in contact with an unlimited amount of Si from the substrate, and the sequential phase formation towards CoSi{sub 2} is established. For deposited layers of composition ranging from 48%Si to 52%Si, the CoSi is the first phase to form and increasing the amount of Si leads to a remarkable improvement of the thermal stability of CoSi on Si(1 0 0). CoSi{sub 2} nucleation was extensively delayed by 150 C compared to the reaction observed from a pure Co film on Si(1 0 0). Electron backscatter diffraction measurements reveal that in this range, the gradual Si increase systematically leads to bigger CoSi grains (up to 20 {micro}m). This shows that the grain size of the CoSi precursor strongly affects the nucleation of the following CoSi{sub 2} phase. Laser-light scattering measurements suggest that adding more than 42%Si reduces the roughness of the CoSi{sub 2} layer.

99 GENERAL AND MISCELLANEOUS↗

Phase diagram to demarcate supercritical, transcritical, and continuous phase regimes for binary fluid equilibrium mixing relevant to combustion applications

Here, a robust methodology to develop phase diagrams of binary fluid mixtures at fixed thermo dynamic conditions (pressure, temperature, and mole fraction) as well as of two initially separated fluids undergoing mixing near critical conditions are presented for fluids and con ditions relevant to rockets, gas turbines, and diesel engine applications. Phase equilibria of mixtures is first examined to provide insight into the continuous-phase mixing behavior (including but not limited to supercritical behavior), and to develop a broadly applicable phase-diagram for binary fluid mixtures at fixed conditions. Next, adiabatic mixing theory and reduced Helmholtz equations of state are used to predict the thermodynamic conditions required to attain continuous-phase binary fluid mixing near critical conditions. Then, a 3D surface diagram (P,T fuel ,T amb ) separating single and two-phase regions is constructed by varying the ambient pressure and the initial temperatures of the two fluids. Polynomial fits of the 3D surfaces for 10 different binary mixtures are tabulated for nitrogen-alkane and methane-oxygen blends relevant to air-breathing and propellant based engines, respectively.

42 ENGINEERING↗

Fluid phase analyzer Patent

Mixed liquid and vapor phase analyzer design with thermocouples for relative heat transfer measurement

Hays, L. G.↗

Search for a mixed quark-hadron phase of QCD matter at the JINR nuclotron

Physics aspects of a JINR project to reach the planned 5 A GeV energy for the Au and U beams and to increase the bombarding energy up to 10 AGeV are discussed. The project aims to search for a possible formation of a strongly interacting mixed quark-hadron phase. The relevant problems are exemplified. The need for scanning heavy-ion interactions in bombarding energy, collision centrality, and isospin asymmetry is emphasized.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Is the surface oxygen exchange rate linked to bulk ion diffusivity in mixed conducting Ruddlesden–Popper phases?

There is a possible link between oxygen surface exchange rate and bulk oxygen anion diffusivity in mixed ionic and electronic conducting oxides; it is a topic of great interest and debate. While a large body of experimental evidence and theoretical analyses support a link, observed differences between bulk and surface composition of these materials are hard to reconcile with this observation. This is further compounded by potential problems with simultaneous measurement of both parameters. Here we utilize separate techniques, in situ neutron diffraction and pulsed isotopic surface exchange, to examine bulk ion mobility and surface oxygen exchange rates of three Ruddlesden-Popper phases, general form A n-1 A 2 'BnO 3n+1 , A n-1 A 2 'BnX 3n+1 ; LaSrCo 0.5 Fe 0.5 O 4-δ (n = 1), La 0.3 Sr 2.7 CoFeO 7-δ (n = 2) and LaSr 3 Co 1.5 Fe 1.5 O 10-δ (n = 3). These measurements are complemented by surface composition determination via high sensitivity-low energy ion scattering. We observe a correlation between bulk ion mobility and surface exchange rate between materials. The surface exchange rates vary by more than one order of magnitude with high anion mobility in the bulk of an oxygen vacancy-rich n = 2 Ruddlesden-Popper material correlating with rapid oxygen exchange. Furthermore this is in contrast with the similar surface exchange rates which we may expect due to similar surface compositions across all three samples. This paper conclude that experimental limitations lead to inherent convolution of surface and bulk rates, and that surface exchange steps are not likely to be rate limiting in oxygen incorporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Transformations in the Mixed Lithium-Magnesium Imide Li{sub 2}Mg(NH){sub 2}

A statistical theory of structural-phase transformations in imide Li{sub 2}Mg(NH){sub 2} is developed, free energies of three phases of imide α, β, γ are calculated, and their state diagrams are determined. Also, the isotherm, isobar, and isopleth curves are examined. Possible manifestation of the hysteretic effect is demonstrated for α- and β-phases. The results of calculations are compared with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spacer Cations Dictate Photoinduced Phase Segregation in 2D Mixed Halide Perovskites

The spacer cation in two-dimensional (2D) Ruddlesden–Popper lead halide perovskites dictates photoinduced phase segregation. Halide ion segregation under steady-state irradiation of single-layer (n = 1) 2D perovskites is seen when butylammonium (BA) is used as the spacer cation, whereas it is essentially absent when BA is replaced with phenethylammonium (PEA).

14 SOLAR ENERGY↗

A Two-length Scale Turbulence Model for Single-phase Multi-fluid Mixing

A two-length scale, second moment turbulence model (Reynolds averaged Navier-Stokes, RANS) is proposed to capture a wide variety of single-phase flows, spanning from incompressible flows with single fluids and mixtures of different density fluids (variable density flows) to flows over shock waves. The two-length scale model was developed to address an inconsistency present in the single-length scale models, e.g. the inability to match both variable density homogeneous Rayleigh-Taylor turbulence and Rayleigh-Taylor induced turbulence, as well as the inability to match both homogeneous shear and free shear flows. The two-length scale model focuses on separating the decay and transport length scales, as the two physical processes are generally different in inhomogeneous turbulence. This allows reasonable comparisons with statistics and spreading rates over such a wide range of turbulent flows using a common set of model coefficients. The specific canonical flows considered for calibrating the model include homogeneous shear, single-phase incompressible shear driven turbulence, variable density homogeneous Rayleigh-Taylor turbulence, Rayleigh-Taylor induced turbulence, and shocked isotropic turbulence. The second moment model shows to compare reasonably well with direct numerical simulations (DNS), experiments, and theory in most cases. The model was then applied to variable density shear layer and shock tube data and shows to be in reasonable agreement with DNS and experiments. Additionally, the importance of using DNS to calibrate and assess RANS type turbulence models is highlighted.

04 OIL SHALES AND TAR SANDS↗

Can the WIMP annihilation boost factor be boosted by the Sommerfeld enhancement?

We demonstrate that the Sommerfeld correction to cold dark matter (CDM) annihilations can be appreciable if even a small component of the dark matter is extremely cold. Subhalo substructure provides such a possibility given that the smallest clumps are relatively cold and contain even colder substructure due to incomplete phase space mixing. Leptonic channels can be enhanced for plausible models and the solar neighborhood boost required to account for PAMELA/ATIC data is plausibly obtained, especially in the case of a few TeV mass neutralino for which the Sommerfeld-corrected boost is found to be {approx}10{sup 4}-10{sup 5}. Saturation of the Sommerfeld effect is shown to occur below {beta}{approx}10{sup -4}, thereby making this result largely independent on the presence of substructures below {approx}10{sup 5}M{sub {center_dot}}. We find that the associated diffuse gamma-ray signal from annihilations would exceed EGRET constraints unless the channels annihilating to heavy quarks or to gauge bosons are suppressed. The lepton channel gamma rays are potentially detectable by the FERMI satellite, not from the inner galaxy where substructures are tidally disrupted, but rather as a quasi-isotropic background from the outer halo, unless the outer substructures are much less concentrated than the inner substructures and/or the CDM density profile out to the virial radius steepens significantly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two-Factor Phase Separations in Mixed-Halide Quasi-2D Perovskite LEDs: Dimensionality and Halide Segregations

Quasi-2D halide perovskites have attracted much interest as a promising material for light-emitting diodes (LEDs) due to their tunability in quantum confinement and halide alloy formation to modulate the energy bandgap and emission color. However, two-factor phase separations with respect to heterogeneous quantum-well thicknesses and halide segregation are still crucial issues in quasi-2D perovskite LEDs, leading to low external quantum efficiencies (EQEs) and color shifts. In this work, we compare quasi-2D perovskite films using different cations to unveil the key contributions from the chemical design of organic cations. While mixing halide ions in conventional quasi-2D perovskite films induces micrometer-scale heterogeneity, new extended and twisted conjugated cations suppress the two-factor phase separations, leading to high EQEs of over 25% and controllable emission wavelengths across red and near-infrared regions. The fundamental insights in this work will provide guidance for advancing materials design and device performance in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amorphous Phases on the Surface of Mars

Both primary (volcanic/impact glasses) and secondary (opal/silica, allophane, hisingerite, npOx, S-bearing) amorphous phases appear to be major components of martian surface materials based on orbital and in-situ measurements. A key observation is that whereas regional/global scale amorphous components include altered glass and npOx, local scale amorphous phases include hydrated silica/opal. This suggests widespread alteration at low water-to-rock ratios, perhaps due to snow/ice melt with variable pH, and localized alteration at high water-to-rock ratios. Orbital and in-situ measurements of the regional/global amorphous component on Mars suggests that it is made up of at least three phases: npOx, amorphous silicate (likely altered glass), and an amorphous S-bearing phase. Fundamental questions regarding the composition and the formation of the regional/global amorphous component(s) still remain: Do the phases form locally or have they been homogenized through aeolian activity and derived from the global dust? Is the parent glass volcanic, impact, or both? Are the phases separate or intimately mixed (e.g., as in palagonite)? When did the amorphous phases form? To address the question of source (local and/or global), we need to look for variations in the different phases within the amorphous component through continued modeling of the chemical composition of the amorphous phases in samples from Gale using CheMin and APXS data. If we find variations (e.g., a lack of or enrichment in amorphous silicate in some samples), this may imply a local source for some phases. Furthermore, the chemical composition of the weathering products may give insight into the formation mechanisms of the parent glass (e.g., impact glasses contain higher Al and lower Si [30], so we might expect allophane as a weathering product of impact glass). To address the question of whether these phases are separate or intimately mixed, we need to do laboratory studies of naturally altered samples made up of mixed phases (e.g., palagonite) and synthetic single phases to determine their short-range order structures and calculate their XRD patterns to use in models of CheMin data. Finally, to address the timing of the alteration, we need to study rocks on the martian surface of different ages that may contain glass (volcanic or impact) with MSL and future rovers to better understand how glass alters on the martian surface, if that alteration mechanism is universal, and if alteration spans across long periods of time or if there is a time past which unaltered glass remains.

Rampe, E. B.↗

Effect of patterned inclusions on the fracture behavior of ceramic composites

Developments in additive manufacturing have enabled the reinforcement of ceramic composites across the scales. Understanding the fracture behavior of such composites is critical for structural design and engineering. However, systematic investigations on the relationship between the patterning characteristics and the effective fracture properties have been scarce. In this work, we propose a mixed-mode phase field model to investigate the effects of elastic modulus and pattern characteristics of circular inclusions on the fracture behavior of a ceramic composite beam. The modeling results have shown that the stiff and compliant inclusions can either repel or attract the crack. The extent of repelling and attraction can be controlled by altering the pattern characteristics. In addition, utilizing the relationship between the pattern characteristics and resulting fracture path, fracture growth can be controlled with appropriate inclusion properties. The targeted enhancement in fracture toughness can also be predicted using an effective fracture model linked with the underlying fracture path computed by the proposed mixed-mode phase field model.

36 MATERIALS SCIENCE↗

Solvothermal syntheses of three new one-dimensional ternary selenidostannates: [DBNH][M{sub 1/2}Sn{sub 1/2}Se{sub 2}] (M=Mn, Zn, Hg)

Three new ternary selenidostannates [DBNH][M{sub 1/2}Sn{sub 1/2}Se{sub 2}] (M=Mn (1), Zn (2), Hg (3); DBN=1,5-diazabicyclo[4.3.0]non-5-ene) have been synthesized under solvothermal condition. Single crystal X-ray analyses reveal that compounds 1–3 crystallize in the tetragonal space group P4{sub 2}/ncm. The structures of 1–3 feature a similar straight one-dimensional [M{sub 1/2}Sn{sub 1/2}Se{sub 2}]{sub n}{sup n−} chain, which is built up by edge-sharing M{sub 1/2}Sn{sub 1/2}Se{sub 4} tetrahedra. The transition metal ions (e.g. Mn{sup 2+} (1), Zn{sup 2+} (2), Hg{sup 2+} (3)) and Sn{sup 4+} ions are located at the same metal site in a mixed-metal phase with a ratio of 0.5/0.5. The band gaps of compounds 2 (2.42 eV) and 3 (2.46 eV) were calculated from the solid state UV–vis diffuse reflectance spectroscopy. - Graphical abstract: Three new one-dimensional ternary selenidostannates, [DBNH][M{sub 1/2}Sn{sub 1/2}Se{sub 2}] (M=Mn (1), Zn (2), Hg (3); DBN =1,5-diazabicyclo[4.3.0]non-5-ene), have been synthesized under solvothermal condition. Highlights: • Three new one-dimensional ternary selenidostannates. • A mixed-metal phase with a ratio of 0.5/0.5. • Heterometallic chalcogenides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of boron doping on optical properties of sol-gel based nanostructured zinc oxide films on glass

Graphical abstract: Room temperature fine structured UV-vis PL emissions (a) as phonon replicas in 1 at.% boron doped film originated from LO phonon evidenced from Near Grazing Incidence Angle (NGIA) IR spectral study (b). Highlights: Black-Right-Pointing-Pointer Sol-gel based boron doped nanostructured ZnO thin films deposited on pure silica glass using crystalline boric acid as boron source. Black-Right-Pointing-Pointer Observed first time, room temperature fine structured PL emissions in 1 at.% doped film as phonon replicas originated from LO phonon (both IR and Raman active). Black-Right-Pointing-Pointer Boron doping controls the LO phonon energy in addition to visible reflection, band gap and grain size. Black-Right-Pointing-Pointer The films possessed mixed crystal phases with hexagonal as major phase. -- Abstract: Boron doped zinc oxide thin films ({approx}80 nm) were deposited onto pure silica glass by sol-gel dip coating technique from the precursor sol/solution of 4.0 wt.% equivalent oxide content. The boron concentration was varied from 0 to 2 at.% w.r.t. Zn using crystalline boric acid. The nanostructured feature of the films was visualized by FESEM images and the largest cluster size of ZnO was found in 1 at.% boron doped film (B1ZO). The presence of mixed crystal phases with hexagonal as major phase was identified from XRD reflections of the films. Particle size, optical band gap, visible specular reflection, room temperature photoluminescence (PL) emissions (3.24-2.28 eV), infra-red (IR) and Raman active longitudinal optical (LO) phonon vibration were found to be dependent on dopant concentration. For the first time, we report the room temperature fine structured PL emissions as phonon replicas originated from the LO phonon (both IR and Raman active) in 1 at.% boron doped zinc oxide film.

36 MATERIALS SCIENCE↗