Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimum loss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Spacecraft Conceptual Design Compared to the Apollo Lunar Lander

Future human exploration of the Moon will require an optimized spacecraft design with each sub-system achieving the required minimum capability and maintaining high reliability. The objective of this study was to trade capability with reliability and minimize mass for the lunar lander spacecraft. The NASA parametric concept for a 3-person vehicle to the lunar surface with a 30% mass margin totaled was considerably heavier than the Apollo 15 Lunar Module "as flown" mass of 16.4 metric tons. The additional mass was attributed to mission requirements and system design choices that were made to meet the realities of modern spaceflight. The parametric tool used to size the current concept, Envision, accounts for primary and secondary mass requirements. For example, adding an astronaut increases the mass requirements for suits, water, food, oxygen, as well as, the increase in volume. The environmental control sub-systems becomes heavier with the increased requirements and more structure was needed to support the additional mass. There was also an increase in propellant usage. For comparison, an "Apollo-like" vehicle was created by removing these additional requirements. Utilizing the Envision parametric mass calculation tool and a quantitative reliability estimation tool designed by Valador Inc., it was determined that with today?s current technology a Lunar Module (LM) with Apollo capability could be built with less mass and similar reliability. The reliability of this new lander was compared to Apollo Lunar Module utilizing the same methodology, adjusting for mission timeline changes as well as component differences. Interestingly, the parametric concept's overall estimated risk for loss of mission (LOM) and loss of crew (LOC) did not significantly improve when compared to Apollo.

Young, C.↗

Towards Prediction of Non-Radiative Decay Pathways in Organic Compounds I: The Case of Naphthalene Quantum Yields

Many emerging technologies depend on human’s ability to control and manipulate the excited-state properties of molecular systems. These technologies include fluorescent labeling in biomedical imaging, light harvesting in photovoltaics, and electroluminescence in light-emitting devices. All of these systems suffer from non-radiative loss pathways that dissipate electronic energy as heat, which causes the overall system efficiency to be directly linked to quantum yield (Φ) of the molecular excited state. Unfortunately, Φ is very difficult to predict from first principles because the description of a slow non-radiative decay mechanism requires an accurate description of long-timescale excited-state quantum dynamics. In the present study, we introduce an efficient semi-empirical method of calculating the fluorescence quantum yield (Φ fl ) for molecular chromophores, which converts simple electronic energies computed using time-dependent density functional theory (TDDFT) into an estimate of Φ fl . As with all machine learning strategies, the algorithm needs to be trained on fluorescent dyes for which Φ fl ’s are known, so as to provide a black-box method which can later predict Φfl’s for chemically similar chromophores that have not been studied experimentally. Here, as a first illustration of how our proposed algorithm can be trained, we examine a family of 25 naphthalene derivatives. The simplest application of the energy gap law is found to be inadequate to explain the rates of internal conversion (IC) or intersystem crossing (ISC) – the electronic properties of at least one higher-lying electronic state (S n or T n ) or one far-from-equilibrium geometry are typically needed to obtain accurate results. Indeed, the key descriptors turn out to be the transition state between the Franck–Condon minimum and a distorted local minimum near an S 0 /S 1 conical intersection (which governs IC) and the magnitude of the spin-orbit coupling (which governs ISC). The resulting Φ fl ’s are predicted with reasonable accuracy (~ 22%), making our approach a promising ingredient for high-throughput screening and rational design of the molecular excited states with desired Φ fl ’s. We thus conclude that our model, while semi-empirical in nature, does in fact extract sound physical insight into the challenge of describing non-radiative relaxations.

36 MATERIALS SCIENCE↗

Z-checker: A framework for assessing lossy compression of scientific data

Because of the vast volume of data being produced by today’s scientific simulations and experiments, lossy data compressor allowing user-controlled loss of accuracy during the compression is a relevant solution for significantly reducing the data size. However, lossy compressor developers and users are missing a tool to explore the features of scientific data sets and understand the data alteration after compression in a systematic and reliable way. To address this gap, we have designed and implemented a generic framework called Z-checker. On the one hand, Z-checker combines a battery of data analysis components for data compression. On the other hand, Z-checker is implemented as an open-source community tool to which users and developers can contribute and add new analysis components based on their additional analysis demands. In this article, we present a survey of existing lossy compressors. Then, we describe the design framework of Z-checker, in which we integrated evaluation metrics proposed in prior work as well as other analysis tools. Specifically, for lossy compressor developers, Z-checker can be used to characterize critical properties (such as entropy, distribution, power spectrum, principal component analysis, and autocorrelation) of any data set to improve compression strategies. For lossy compression users, Z-checker can detect the compression quality (compression ratio and bit rate) and provide various global distortion analysis comparing the original data with the decompressed data (peak signal-to-noise ratio, normalized mean squared error, rate–distortion, rate-compression error, spectral, distribution, and derivatives) and statistical analysis of the compression error (maximum, minimum, and average error; autocorrelation; and distribution of errors). Z-checker can perform the analysis with either coarse granularity (throughout the whole data set) or fine granularity (by user-defined blocks), such that the users and developers can select the best fit, adaptive compressors for different parts of the data set. Z-checker features a visualization interface displaying all analysis results in addition to some basic views of the data sets such as time series. To the best of our knowledge, Z-checker is the first tool designed to assess lossy compression comprehensively for scientific data sets.

97 MATHEMATICS AND COMPUTING↗

Bladder radiotherapy treatment: A retrospective comparison of 3-dimensional conformal radiotherapy, intensity-modulated radiation therapy, and volumetric-modulated arc therapy plans

To examine tumor's and organ's response when different radiotherapy plan techniques are used. Ten patients with confirmed bladder tumors were first treated using 3-dimensional conformal radiotherapy (3DCRT) and subsequently the original plans were re-optimized using the intensity-modulated radiation treatment (IMRT) and volumetric-modulated arc therapy (VMAT)-techniques. Targets coverage in terms of conformity and homogeneity index, TCP, and organs' dose limits, including integral dose analysis were evaluated. In addition, MUs and treatment delivery times were compared. Better minimum target coverage (1.3%) was observed in VMAT plans when compared to 3DCRT and IMRT ones confirmed by a statistically significant conformity index (CI) results. Large differences were observed among techniques in integral dose results of the femoral heads. Even if no statistically significant differences were reported in rectum and tissue, a large amount of energy deposition was observed in 3DCRT plans. In any case, VMAT plans provided better organs and tissue sparing confirmed also by the normal tissue complication probability (NTCP) analysis as well as a better tumor control probability (TCP) result. Our analysis showed better overall results in planning using VMAT techniques. Furthermore, a total time reduction in treatment observed among techniques including gantry and collimator rotation could encourage using the more recent one, reducing target movements and patient discomfort.

61 RADIATION PROTECTION AND DOSIMETRY↗

EVOLUTION OF THE SOLAR NEBULA AND PLANET GROWTH UNDER THE INFLUENCE OF PHOTOEVAPORATION

The recent development of a new minimum mass solar nebula, under the assumption that the giant planets formed in the compact configuration of the Nice model, has shed new light on planet formation in the solar system. Desch previously found that a steady state protoplanetary disk with an outer boundary truncated by photoevaporation by an external massive star would have a steep surface density profile. In a completely novel way, we have adapted numerical methods for solving propagating phase change problems to astrophysical disks. We find that a one-dimensional time-dependent disk model that self-consistently tracks the location of the outer boundary produces shallower profiles than those predicted for a steady state disk. The resulting surface density profiles have a radial dependence of {Sigma}(r){proportional_to}r{sup -1.25+0.88{sub -0.33}} with a power-law exponent that in some models becomes as large as {approx}{Sigma}(r) {proportional_to} r {sup -2.1}. The evolutionary timescales of the model disks can be sped up or slowed down by altering the amount of far-ultraviolet flux or the viscosity parameter {alpha}. Slowing the evolutionary timescale by decreasing the incident far-ultraviolet flux, or similarly by decreasing {alpha}, can help to grow planets more rapidly, but at the cost of decreased migration timescales. Although they similarly affect relevant timescales, changes in the far-ultraviolet flux or {alpha} produce disks with drastically different outer radii. Despite their differences, these disks are all characterized by outward mass transport, mass loss at the outer edge, and a truncated outer boundary. The transport of mass from small to large radii can potentially prevent the rapid inward migration of Jupiter and Saturn, while at the same time supply enough mass to the outer regions of the disk for the formation of Uranus and Neptune.

79 ASTRONOMY AND ASTROPHYSICS↗

Observations of comet ISON (C/2012 S1) from Lowell observatory

We observed the dynamically new sungrazing comet ISON (C/2012 S1) extensively at Lowell Observatory throughout 2013 in order to characterize its behavior prior to perihelion. ISON had “typical” abundances for an Oort Cloud comet. Its dust production, as measured by Afρ, remained nearly constant during the apparition but its CN gas production increased by ∼50 ×. The minimum active area necessary to support observed water production rates exceeded the likely surface area of the nucleus and suggests a population of icy grains in the coma. Together with the flattening of the dust radial profile over time, this is consistant with ejection of a large quantity of slow moving dust and icy grains in the coma at large heliocentric distance. The dust morphology was dominated by the tail, but a faint sunward dust fan was detected in March, April, May, and September. We imaged multiple gas species in September, October, and November. All gas species were more extended than the dust coma, although only CN had sufficient signal-to-noise for detailed morphological study. Excess CN signal was observed in the sunward hemisphere in September and early October. In November the excess CN signal was in the tailward hemisphere and two faint CN features appeared approximately orthogonal to the tail with position angles varying by about ±20° from night to night. Using numerical modeling, we best reproduced the orientation and shape of these features as well as the bulk brightness with a pole oriented approximately toward the Sun and a single source located within ∼35° of the equator. Variations in position angle and relative brightness of the CN features from night to night suggest a rotation period shorter than 24 hr. The production rates and coma morphology suggest a nucleus that was active over nearly its entire sunward facing hemisphere in September and October but which underwent a significant mass loss event, potentially including fragmentation, shortly before November 1. Significant subsequent mass loss likely continued at the same site over subsequent days/weeks and may have catastrophically weakened the nucleus prior to perihelion.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EVOLUTION OF CATACLYSMIC VARIABLES AS REVEALED BY THEIR DONOR STARS

We present an attempt to reconstruct the complete evolutionary path followed by cataclysmic variables (CVs), based on the observed mass-radius relationship of their donor stars. Along the way, we update the semi-empirical CV donor sequence presented previously by one of us, present a comprehensive review of the connection between CV evolution and the secondary stars in these systems, and reexamine most of the commonly used magnetic braking (MB) recipes, finding that even conceptually similar ones can differ greatly in both magnitude and functional form. The great advantage of using donor radii to infer mass-transfer and angular-momentum-loss (AML) rates is that they sample the longest accessible timescales and are most likely to represent the true secular (evolutionary average) rates. We show explicitly that if CVs exhibit long-term mass-transfer-rate fluctuations, as is often assumed, the expected variability timescales are so long that other tracers of the mass-transfer rate-including white dwarf (WD) temperatures-become unreliable. We carefully explore how much of the radius difference between CV donors and models of isolated main-sequence stars may be due to mechanisms other than mass loss. The tidal and rotational deformation of Roche-lobe-filling stars produces {approx_equal} 4.5% radius inflation below the period gap and {approx_equal} 7.9% above. A comparison of stellar models to mass-radius data for non-interacting stars suggests a real offset of {approx_equal} 1.5% for fully convective stars (i.e., donors below the gap) and {approx_equal} 4.9% for partially radiative ones (donors above the gap). We also show that donor bloating due to irradiation is probably smaller than, and at most comparable to, these effects. After calibrating our models to account for these issues, we fit self-consistent evolution sequences to our compilation of donor masses and radii. In the standard model of CV evolution, AMLs below the period gap are assumed to be driven solely by gravitational radiation (GR), while AMLs above the gap are usually described by an MB law first suggested by Rappaport et al. We adopt simple scaled versions of these AML recipes and find that these are able to match the data quite well. The optimal scaling factors turn out to be f{sub GR} = 2.47 {+-} 0.22 below the gap and f{sub MB} = 0.66 {+-} 0.05 above (the errors here are purely statistical, and the standard model corresponds to f{sub GR} = f{sub MB} = 1). This revised model describes the mass-radius data significantly better than the standard model. Some of the most important implications and applications of our results are as follows. (1) The revised evolution sequence yields correct locations for the minimum period and the upper edge of the period gap; the standard sequence does not. (2) The observed spectral types of CV donors are compatible with both standard and revised models. (3) A direct comparison of predicted and observed WD temperatures suggests an even higher value for f{sub GR}, but this comparison is sensitive to the assumed mean WD mass and the possible existence of mass-transfer-rate fluctuations. (4) The predicted absolute magnitudes of donor stars in the near-infrared form a lower envelope around the observed absolute magnitudes for systems with parallax distances. This is true for all of our sequences, so any of them can be used to set firm lower limits on (or obtain rough estimates of) the distances toward CVs based only on P{sub orb} and single epoch near-IR measurements. (5) Both standard and revised sequences predict that short-period CVs should be susceptible to dwarf nova (DN) eruptions, consistent with observations. However, both sequences also predict that the fraction of DNe among long-period CVs should decline with P{sub orb} above the period gap. Observations suggest the opposite behavior, and we discuss the possible explanations for this discrepancy. (6) Approximate orbital period distributions constructed from our evolution sequences suggest that the ratio of long-period CVs to short-period, pre-bounce CVs is about 3 x higher for the revised sequence than the standard one. This may resolve a long-standing problem in CV evolution. Tables describing our donor and evolution sequences are provided in electronically readable form.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA Lewis Launch Collision Probability Model Developed and Analyzed

There are nearly 10,000 tracked objects orbiting the earth. These objects encompass manned objects, active and decommissioned satellites, spent rocket bodies, and debris. They range from a few centimeters across to the size of the MIR space station. Anytime a new satellite is launched, the launch vehicle with its payload attached passes through an area of space in which these objects orbit. Although the population density of these objects is low, there always is a small but finite probability of collision between the launch vehicle and one or more of these space objects. Even though the probability of collision is very low, for some payloads even this small risk is unacceptable. To mitigate the small risk of collision associated with launching at an arbitrary time within the daily launch window, NASA performs a prelaunch mission assurance Collision Avoidance Analysis (or COLA). For the COLA of the Cassini spacecraft, the NASA Lewis Research Center conducted an in-house development and analysis of a model for launch collision probability. The model allows a minimum clearance criteria to be used with the COLA analysis to ensure an acceptably low probability of collision. If, for any given liftoff time, the nominal launch vehicle trajectory would pass a space object with less than the minimum required clearance, launch would not be attempted at that time. The model assumes that the nominal positions of the orbiting objects and of the launch vehicle can be predicted as a function of time, and therefore, that any tracked object that comes within close proximity of the launch vehicle can be identified. For any such pair, these nominal positions can be used to calculate a nominal miss distance. The actual miss distances may differ substantially from the nominal miss distance, due, in part, to the statistical uncertainty of the knowledge of the objects positions. The model further assumes that these position uncertainties can be described with position covariance matrices. With these, and some additional simplifying assumptions, a closed-form solution for the probability of collision is obtained. This solution provides clear insights into how each of the independent parameters affects the probability of collision. It shows that for a given maximum probability of collision and prior knowledge of the objects position uncertainties and sizes, only knowledge of the nominal closest approach distance is required to make the launch/no launch decision. The model was completed and used for the mission assurance COLA analysis for the Cassini spacecraft, which was launched on a Titan IV/Centaur rocket on October 15, 1997. Although the model was specifically developed for the Cassini mission, it is clearly applicable for other launches as well. The effect of COLA closures on the launch window is shown. The bar represents the entire 140-min launch window on October 15, 1997; the blackened areas represent the loss of launch opportunities due to the potential for a collision with an orbiting object.

Bollenbacher, Gary↗

Uncertainty Quantification and Sensitivity Analysis for Coupled VERA-CS and FRAPCON

The current nuclear power plant fleet in the U.S. is facing numerous challenges economically ranging from low natural gas price to the rapidly growing renewable energy sources such as wind and solar power. In order for the nuclear industry to keep the viability of its operating fleet, new innovations have to be introduced to lower the costs to operate the fleet. One area that could contribute to the cost reduction is to lower the fuel cycle cost and improve the plant safety through initiatives such as higher burnup fuel and accident tolerant fuel. At the same time, the nuclear industry has to address future challenges on the horizon such as load following and other flexible operating strategies as well as those associated with new regulations such as 10 CFR 50.69 and 10 CFR50.46c etc. All these require coupled analysis of core neutronics, thermal hydraulics and fuel performance, which necessitates the development of a multi-physics toolkit. Since different models, assumptions, and fidelities have gone into various computer codes, how to consistently propagate uncertainties in a multi-physics environment warrants careful evaluation. The U.S. DOE's Light Water Reactor Sustainability (LWRS) Program initiated a project to develop analytical capabilities to support the industry to address these challenges. The general idea behind the initiative was the development of an integrated multiphysics evaluation model. This integrated evaluation model is called LOTUS which stands for LOCA Toolkit for the U.S. Light Water Reactors. The focus of LOTUS is to establish the automation of the interface between the five disciplines. LOTUS framework ensures that uncertainties can be easily propagated to solve the problems forward and backward (inverse) with large numbers of simulations. The objective of this work is to perform uncertainty quantification (UQ) and sensitivity analysis (SA) on a coupling of CASL's Virtual Environment for Reactor Applications-Core Simulator (VERA-CS) and NRC's fuel performance code FRAPCON. The work presented herein is a subset of the overall LOTUS framework. The figures of merit (FOM) selected for analysis are minimum departure from nucleate boiling ratio (MDNBR), maximum fuel centerline temperature (MFCT), and the gap conductance at peak power (GCPP). All FOM are obtained at the end of the of a depletion case for a half cycle lasting 263 days. The minimum is taken over all spatial location for each pin at the end of the half cycle. This value is calculated in VERACS alone and has been analyzed in previous work by Brown and Zhang. The MFCT is available in both VERA-CS and FRAPCON, but is calculated via different methods (see Model Inconsistencies section for more details). For this work, only the FRAPCON values are reported due to the code's maturity from extensive validation in fuel performance. Previous work includes SA on a standalone nuclear fuel performance code VTT-modified FRAPCON- 3.4 by Ikonen. The GCPP is the gap conductance at the location corresponding to maximum power in the fuel rod. This value is available in FRAPCON alone and highlights the capability of LOTUS to obtain unique fuel performance metrics for each pin in a core simulation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Seasonal Cost-Benefit Analysis of Automated Distribution Feeder Upgrades with Advanced Mitigation Technologies

The increasing deployment of distributed solar photovoltaics (DPV) to meet clean energy goals can trigger adverse grid operation issues, such as voltage excursions and the violation of thermal loading constraints of the power delivery elements (e.g., lines and transformers) on the evolving electricity infrastructure. Such integration issues would require distribution upgrades with associated costs to mitigate them and to maintain reliable and resilient grid operating conditions. Traditional distribution network upgrade approaches use a specific single snapshot analysis that is overly conservative. This study considers a multi-time point analysis to capture both moderate (probable bounds) and extreme grid operating conditions using time points such as minimum load with minimum photovoltaics (PV), maximum load with maximum PV, maximum load with minimum PV, and minimum load with maximum PV. Further, this study investigates seasonal variation impacts and associated distribution upgrade costs for a spring season case (March, representing a low load and high PV scenario) and a summer case (July, representing a high load and high PV scenario). Such seasonal analysis will allow system operators to characterize upgrade requirements and associated costs across various periods. Because the spatial distribution of DPV can impact upgrade and associated costs, this study investigates three common DPV deployment scenarios - randomly deployed, close to the substation, and far from the substation - at different penetration levels. Apart from spatial distribution impacts, this project evaluates the techno-economic impacts of the nodal photovoltaic penetration factor (NPPF) for generating the various DPV deployment scenarios at increasing penetration levels. This project investigates the impact of varying nodal PV-to-load ratios using conservative and extreme NPPF values of 3 and 10, respectively. This study investigates the deployment of traditional infrastructure upgrade strategies, such as installing new voltage regulating equipment, transformers and lines replacements, and the activation of advanced inverter functionality (e.g., autonomous volt/VAR) in expanding PV hosting capacity. Existing DPV systems are assumed to operate with the legacy unity power factor, and we considered the possibility of retrofitting such systems with the activation of volt/VAR control as integration standards and regulations continue to evolve to allow such functions. The cost-benefit analysis metrics used in study include distribution upgrade costs, average cost per watt of the upgrade cost, average marginal cost per watt of the upgrade cost, and power losses.

14 SOLAR ENERGY↗

SIMULATION OF MAGNETOHYDRODYNAMIC SHOCK WAVE GENERATION, PROPAGATION, AND HEATING IN THE PHOTOSPHERE AND CHROMOSPHERE USING A COMPLETE ELECTRICAL CONDUCTIVITY TENSOR

An electrical conductivity tensor is used in a 1.5D magnetohydrodynamic (MHD) simulation to describe how MHD shock waves may form, propagate, and heat the photosphere and chromosphere by compression and resistive dissipation. The spatial resolution is 1 km. A train of six shock waves is generated by a sinusoidal magnetic field driver in the photosphere with a period T = 30 s, mean of 500 G, and variation of 250 G. The duration of the simulation is 200 s. Waves generated in the photosphere evolve into shock waves at a height z approx 375 km above the photosphere. The transition of the atmosphere from weakly to strongly magnetized with increasing height causes the Pedersen resistivity eta{sub P} to increase to approx2000 times the Spitzer resistivity. This transition occurs over a height range of a few hundred kilometers near the temperature minimum of the initial state at z approx 500 km. The initial state is a model atmosphere derived by Fontenla et al., plus a background magnetic field. The increase in eta{sub P} is associated with an increase in the resistive heating rate Q. Shock layer thicknesses are approx10-20 km. They are nonzero due to the presence of resistive dissipation, so magnetization-induced resistivity plays a role in determining shock structure, and hence the compressive heating rate Q{sub c} . At t = 200 s the solution has the following properties. Within shock layers, Q{sub maximum} approx 1.4-7 erg cm{sup -3} s{sup -1}, and Q{sub c,maximum} approx 10-10{sup 3} Q{sub maximum}. Between shock waves, and at some points within shock layers, Q{sub c} < 0, indicating cooling by rarefaction. The integrals of Q and Q{sub c} over the shock wave train are F approx 4.6 x 10{sup 6} erg cm{sup -2} s{sup -1} and F{sub c} approx 1.24 x 10{sup 9} erg cm{sup -2} s{sup -1}. A method based on the thermal, mechanical, and electromagnetic energy conservation equations is presented for checking the accuracy of the numerical solution, and gaining insight into energy flow and transformation. The method can be applied to higher dimensional simulations. It is suggested that observations be performed to map out the transition region across which the transition from weakly ionized, weakly magnetized plasma to weakly ionized, strongly magnetized plasma occurs, and to correlate it with net radiative loss.

79 ASTRONOMY AND ASTROPHYSICS↗

Global Methane Budget 2000–2020

Abstract. Understanding and quantifying the global methane (CH4) budget is important for assessing realistic pathways to mitigate climate change. CH4 is the second most important human-influenced greenhouse gas in terms of climate forcing after carbon dioxide (CO2), and both emissions and atmospheric concentrations of CH4 have continued to increase since 2007 after a temporary pause. The relative importance of CH4 emissions compared to those of CO2 for temperature change is related to its shorter atmospheric lifetime, stronger radiative effect, and acceleration in atmospheric growth rate over the past decade, the causes of which are still debated. Two major challenges in quantifying the factors responsible for the observed atmospheric growth rate arise from diverse, geographically overlapping CH4 sources and from the uncertain magnitude and temporal change in the destruction of CH4 by short-lived and highly variable hydroxyl radicals (OH). To address these challenges, we have established a consortium of multidisciplinary scientists under the umbrella of the Global Carbon Project to improve, synthesise, and update the global CH4 budget regularly and to stimulate new research on the methane cycle. Following Saunois et al. (2016, 2020), we present here the third version of the living review paper dedicated to the decadal CH4 budget, integrating results of top-down CH4 emission estimates (based on in situ and Greenhouse Gases Observing SATellite (GOSAT) atmospheric observations and an ensemble of atmospheric inverse-model results) and bottom-up estimates (based on process-based models for estimating land surface emissions and atmospheric chemistry, inventories of anthropogenic emissions, and data-driven extrapolations). We present a budget for the most recent 2010–2019 calendar decade (the latest period for which full data sets are available), for the previous decade of 2000–2009 and for the year 2020. The revision of the bottom-up budget in this 2025 edition benefits from important progress in estimating inland freshwater emissions, with better counting of emissions from lakes and ponds, reservoirs, and streams and rivers. This budget also reduces double counting across freshwater and wetland emissions and, for the first time, includes an estimate of the potential double counting that may exist (average of 23 Tg CH4 yr−1). Bottom-up approaches show that the combined wetland and inland freshwater emissions average 248 [159–369] Tg CH4 yr−1 for the 2010–2019 decade. Natural fluxes are perturbed by human activities through climate, eutrophication, and land use. In this budget, we also estimate, for the first time, this anthropogenic component contributing to wetland and inland freshwater emissions. Newly available gridded products also allowed us to derive an almost complete latitudinal and regional budget based on bottom-up approaches. For the 2010–2019 decade, global CH4 emissions are estimated by atmospheric inversions (top-down) to be 575 Tg CH4 yr−1 (range 553–586, corresponding to the minimum and maximum estimates of the model ensemble). Of this amount, 369 Tg CH4 yr−1 or ∼ 65 % is attributed to direct anthropogenic sources in the fossil, agriculture, and waste and anthropogenic biomass burning (range 350–391 Tg CH4 yr−1 or 63 %–68 %). For the 2000–2009 period, the atmospheric inversions give a slightly lower total emission than for 2010–2019, by 32 Tg CH4 yr−1 (range 9–40). The 2020 emission rate is the highest of the period and reaches 608 Tg CH4 yr−1 (range 581–627), which is 12 % higher than the average emissions in the 2000s. Since 2012, global direct anthropogenic CH4 emission trends have been tracking scenarios that assume no or minimal climate mitigation policies proposed by the Intergovernmental Panel on Climate Change (shared socio-economic pathways SSP5 and SSP3). Bottom-up methods suggest 16 % (94 Tg CH4 yr−1) larger global emissions (669 Tg CH4 yr−1, range 512–849) than top-down inversion methods for the 2010–2019 period. The discrepancy between the bottom-up and the top-down budgets has been greatly reduced compared to the previous differences (167 and 156 Tg CH4 yr−1 in Saunois et al. (2016, 2020) respectively), and for the first time uncertainties in bottom-up and top-down budgets overlap. Although differences have been reduced between inversions and bottom-up, the most important source of uncertainty in the global CH4 budget is still attributable to natural emissions, especially those from wetlands and inland freshwaters. The tropospheric loss of methane, as the main contributor to methane lifetime, has been estimated at 563 [510–663] Tg CH4 yr−1 based on chemistry–climate models. These values are slightly larger than for 2000–2009 due to the impact of the rise in atmospheric methane and remaining large uncertainty (∼ 25 %). The total sink of CH4 is estimated at 633 [507–796] Tg CH4 yr−1 by the bottom-up approaches and at 554 [550–567] Tg CH4 yr−1 by top-down approaches. However, most of the top-down models use the same OH distribution, which introduces less uncertainty to the global budget than is likely justified. For 2010–2019, agriculture and waste contributed an estimated 228 [213–242] Tg CH4 yr−1 in the top-down budget and 211 [195–231] Tg CH4 yr−1 in the bottom-up budget. Fossil fuel emissions contributed 115 [100–124] Tg CH4 yr−1 in the top-down budget and 120 [117–125] Tg CH4 yr−1 in the bottom-up budget. Biomass and biofuel burning contributed 27 [26–27] Tg CH4 yr−1 in the top-down budget and 28 [21–39] Tg CH4 yr−1 in the bottom-up budget. We identify five major priorities for improving the CH4 budget: (i) producing a global, high-resolution map of water-saturated soils and inundated areas emitting CH4 based on a robust classification of different types of emitting ecosystems; (ii) further development of process-based models for inland-water emissions; (iii) intensification of CH4 observations at local (e.g. FLUXNET-CH4 measurements, urban-scale monitoring, satellite imagery with pointing capabilities) to regional scales (surface networks and global remote sensing measurements from satellites) to constrain both bottom-up models and atmospheric inversions; (iv) improvements of transport models and the representation of photochemical sinks in top-down inversions; and (v) integration of 3D variational inversion systems using isotopic and/or co-emitted species such as ethane as well as information in the bottom-up inventories on anthropogenic super-emitters detected by remote sensing (mainly oil and gas sector but also coal, agriculture, and landfills) to improve source partitioning. The data presented here can be downloaded from https://doi.org/10.18160/GKQ9-2RHT (Martinez et al., 2024).

54 ENVIRONMENTAL SCIENCES↗

A combined electron beam/optical lithography process step for the fabrication of sub-half-micron-gate-length MMIC chips

Advanced radar and communication systems rely heavily on state-of-the-art microelectronics. Systems such as the phased-array radar require many transmit/receive (T/R) modules which are made up of many millimeter wave - microwave integrated circuits (MMIC's). The heart of a MMIC chip is the Gallium Arsenide (GaAs) field-effect transistor (FET). The transistor gate length is the critical feature that determines the operating frequency of the radar system. A smaller gate length will typically result in a higher frequency. In order to make a phased array radar system economically feasible, manufacturers must be capable of producing very large quantities of small-gate-length MMIC chips at a relatively low cost per chip. This requires the processing of a large number of wafers with a large number of chips per wafer, minimum processing time, and a very high chip yield. One of the bottlenecks in the fabrication of MIMIC chips is the transistor gate definition. The definition of sub-half-micron gates for GaAs-based field-effect transistors is generally performed by direct-write electron beam lithography (EBL). Because of the throughput limitations of EBL, the gate-layer fabrication is conventionally divided into two lithographic processes where EBL is used to generate the gate fingers and optical lithography is used to generate the large-area gate pads and interconnects. As a result, two complete sequences of resist application, exposure, development, metallization and lift-off are required for the entire gate structure. We have baselined a hybrid process, referred to as EBOL (electron beam/optical lithography), in which a single application of a multi-level resist is used for both exposures. The entire gate structure, (gate fingers, interconnects and pads), is then formed with a single metallization and lift-off process. The EBOL process thus retains the advantages of the high-resolution E-beam lithography and the high throughput of optical lithography while essentially eliminating an entire lithography/metallization/lift-off process sequence. This technique has been proven to be reliable for both trapezoidal and mushroom gates and has been successfully applied to metal-semiconductor and high-electron-mobility field-effect transistor (MESFET and HEMT) wafers containing devices with gate lengths down to 0.10 micron and 75 x 75 micron gate pads. The yields and throughput of these wafers have been very high with no loss in device performance. We will discuss the entire EBOL process technology including the multilayer resist structure, exposure conditions, process sensitivities, metal edge definition, device results, comparison to the standard gate-layer process, and its suitability for manufacturing.

Sewell, James S.↗

Supernovae with two peaks in the optical light curve and the signature of progenitors with low-mass extended envelopes

Early observations of supernova light curves are powerful tools for shedding light on the pre-explosion structures of their progenitors and their mass-loss histories just prior to explosion. Some core-collapse supernovae that are detected during the first days after the explosion prominently show two peaks in the optical bands, including the R and I bands, where the first peak appears to be powered by the cooling of shocked surface material and the second peak is clearly powered by radioactive decay. Such light curves have been explored in detail theoretically for SN 1993J and 2011dh, where it was found that they may be explained by progenitors with extended, low-mass envelopes. Here, we generalize these results. We first explore whether any double-peaked light curve of this type can be generated by a progenitor with a 'standard' density profile, such as a red supergiant or a Wolf-Rayet star. We show that a standard progenitor (1) cannot produce a double-peaked light curve in the R and I bands and (2) cannot exhibit a fast drop in the bolometric luminosity as is seen after the first peak. We then explore the signature of a progenitor with a compact core surrounded by extended, low-mass material. This may be a hydrostatic low-mass envelope or material ejected just prior to the explosion. We show that it naturally produces both of these features. We use this result to provide simple formulae to estimate (1) the mass of the extended material from the time of the first peak, (2) the extended material radius from the luminosity of the first peak, and (3) an upper limit on the core radius from the luminosity minimum between the two peaks.

79 ASTRONOMY AND ASTROPHYSICS↗

Intermittent gravity: How much, how often, how long?

Continuous exposure to gravity may not be necessary to prevent the deconditioning effects of microgravity. It is not known, however, what the minimum gravity (G) exposure reguirements are, whether they vary for different physiological systems, or whether passive Gz (gravity in the head-to-toe vector) or activity in a G field is more effective in preventing deconditioning. It is also not known what the optimal characteristics of the G stimulus should be in terms of amplitude, duration, and frequency. To begin to address these questions, a 4-day -6 deg head-down bed rest (HDBR) study was conducted. Nine males (aged 30-50 yr) were subjected, over a period of seven months, to four different +1 Gz exposure protocols (periodic standing or controlled walking each for a total of 2 or 4 hr/day in individual 15-min doses), plus a control (0 Gz) of continuous HDBR. The study consisted of one ambulatory control day, 4 full days of -6 deg HDBR, and a recovery day when subjects were released at the end of HDBR after completion of tests. A battery of tests was selected and standardized in order to evaluate the known early responses to HDBR. Dependent variables of interest included orthostatic tolerance (30 min at 60 deg head-up tilt) and hemodynamics during head-up tilt, peak oxygen consumption (VO2(sub peak)) plasma volume (PV), and urinary calcium (Ca). The results were as follows: 4 hr standing completely prevented and 2 hr walking partially prevented post-HDBR orthostatic intolerance. Walking at 3 mi/hr for 4 hr/day provided no additional benefit. Intermittent walking attenuated, but did not prevent, the decrease in VO2(sub peak). Both 4 hr conditions showed less PV loss by the end of HDBR; both 2 hr conditions were without effect. Both 2 and 4 hr walking essentially prevented urinary Ca excretion and were more effective than standing. It is concluded that different physiological systems benefit differentially from passive +1 Gz or activity in +1 Gz, and the intensity of the stimulus may be an important contributing factor.

Vernikos, Joan↗

POSSIBLE DISINTEGRATING SHORT-PERIOD SUPER-MERCURY ORBITING KIC 12557548

We report on the discovery of stellar occultations, observed with Kepler, which recur periodically at 15.685 hr intervals, but which vary in depth from a maximum of 1.3% to a minimum that can be less than 0.2%. The star that is apparently being occulted is KIC 12557548, a V = 16 mag K dwarf with T{sub eff,s} {approx_equal} 4400 K. The out-of-occultation behavior shows no evidence for ellipsoidal light variations, indicating that the mass of the orbiting object is less than {approx}3 M{sub J} (for an orbital period of 15.7 hr). Because the eclipse depths are highly variable, they cannot be due solely to transits of a single planet with a fixed size. We discuss but dismiss a scenario involving a binary giant planet whose mutual orbit plane precesses, bringing one of the planets into and out of a grazing transit. This scenario seems ruled out by the dynamical instability that would result from such a configuration. We also briefly consider an eclipsing binary, possibly containing an accretion disk, that either orbits KIC 12557548 in a hierarchical triple configuration or is nearby on the sky, but we find such a scenario inadequate to reproduce the observations. The much more likely explanation-but one which still requires more quantitative development-involves macroscopic particles escaping the atmosphere of a slowly disintegrating planet not much larger than Mercury in size. The particles could take the form of micron-sized pyroxene or aluminum oxide dust grains. The planetary surface is hot enough to sublimate and create a high-Z atmosphere; this atmosphere may be loaded with dust via cloud condensation or explosive volcanism. Atmospheric gas escapes the planet via a Parker-type thermal wind, dragging dust grains with it. We infer a mass-loss rate from the observations of order 1 M{sub Circled-Plus} Gyr{sup -1}, with a dust-to-gas ratio possibly of order unity. For our fiducial 0.1 M{sub Circled-Plus} planet (twice the mass of Mercury), the evaporation timescale may be {approx}0.2 Gyr. Smaller mass planets are disfavored because they evaporate still more quickly, as are larger mass planets because they have surface gravities too strong to sustain outflows with the requisite mass-loss rates. The occultation profile evinces an ingress-egress asymmetry that could reflect a comet-like dust tail trailing the planet; we present simulations of such a tail.

79 ASTRONOMY AND ASTROPHYSICS↗

Airspace Safety Threshold Study: NAS-Wide Encounter Rate Evaluation Using Historical Radar Data and ACES

Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 (SC-228) is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. With regard to the safety aspect being studied by the SC-228 DAA Safety sub-group, NASA has conducted a study using the ACES (Airspace Concept Evaluation System) simulation capability to determine: 1) the rate at which IFR aircraft encounter other IFR and VFR aircraft, and 2) the rate at which UAS aircraft encounter VFR aircraft as well as the corresponding encounter geometries. Five different separation thresholds were used (two for encounter and one each for well-clear, near mid-air collision, and closest point of approach). The results will be used by the SC-228 DAA Safety sub-group to inform decisions about the safety aspect of UAS DAA systems and future requirements development and validation efforts.

encounter geometry↗

Design and Performance Testing of a Linear Array of Position-Sensitive Virtual Frisch-Grid CdZnTe Detectors for Uranium Enrichment Measurements

Abstract— Arrays of position-sensitive virtual Frisch-grid CdZnTe (CZT) detectors with enhanced energy resolution have been proposed for spectroscopy and imaging of gamma-ray sources in different applications. The flexibility of the array design, which can employ CZT crystals with thicknesses up to several centimeters in the direction of electron drift, allows for integration into different kinds of field-portable instruments. These can include small hand-held devices, compact gamma cameras and large field-of-view imaging systems. In this work, we present results for a small linear array of such detectors optimized for the low-energy region, 50-400 keV gamma-rays, which is principally intended for incorporation into hand-held instruments. There are many potential application areas for such instruments, including uranium enrichment measurements, storage monitoring, dosimetry and other safeguards-related tasks that can benefit from compactness and isotope-identification capability. The array described here provides a relatively large area with a minimum number of readout channels, which potentially allows the developers to avoid using an ASIC-based electronic readout by substituting it with hybrid preamplifiers followed by digitizers. The array prototype consists of six (5x5.7x25 mm3) CZT detectors positioned in a line facing the source to achieve a maximum exposure area (~10 cm2). Each detector is furnished with 5 mm-wide charge-sensing pads placed near the anode. The pad signals are converted into X-Y coordinates for each interaction event, which are combined with the cathode signals (for determining the Z coordinates) to give 3D positional information for all interaction points. This information is used to correct the response non-uniformity caused by material inhomogeneity, which therefore allows the usage of standard-grade (unselected) CZT crystals, while achieving high-resolution spectroscopic performance for the instrument. In this presentation we describe the design of the array, the results from detailed laboratory tests, and preliminary results from measurements taken during a field test.

36 MATERIALS SCIENCE↗