Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microstructure model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Microstructure and Fission Product Distribution Examination in the UCO kernel of TRISO Fuel Particles

The effect of irradiation and fabrication process on the UCO fuel kernel, kernel-buffer interlayer and fission products, has not been fully studied for UCO fuel kernels of TRISO coated particles. Specifically, the potential correlation(s) with fission product retention, composition and distribution within these structures for the tristructural isotropic (TRISO) fuel performance at normal and accident conditions, are not well reported in literature. Structural and chemical information in the irradiated UCO fuel kernel, e.g., the stoichiometry variations, may further contribute to fuel performance modeling under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The microstructural and micro-chemical evolution of selected irradiated UCO fuel kernels, kernel buffer interfaces and recoil zones were characterized using Scanning Transmission Electron Microscopy (STEM) and Energy Dispersive Spectroscopy (EDS) elemental mapping. The fuel kernel of particles from Advanced Gas Reactor (AGR)-2 irradiated to 10.8% fissions per initial metal atom (FIMA), were examined with the following main findings: (1) large fission gas bubbles were mainly identified in the zirconium and molybdenum enriched but oxygen depleted phases in the center of fuel kernel, (2) significant inter-diffusion between the UCO fuel kernel and pyro-carbon buffer layer was observed as a high density of sub-micron sized carbon inclusions was identified at near the interface in the kernel side and some isolated UCO particles were located in the buffer layer, (3) pores filled with free carbon were also observed in the recoil zone specimen. Fuel kernels from two AGR-1 compacts irradiated to 11.4 and 17.4% FIMA respectively, were examined with the following main findings: (1) two primary phases consisting of a “high-Z (atomic mass)” UC(O) phase (rocksalt; a=0.496 nm) that also contained Zr, Mo, and/or Ru and a “low-Z” UO2(C) phase (fluorite structure; a = 0.547nm) in which trace amounts of I, Nd, Pr, and/or Er could be detected. This latter phase contained many precipitates of the “high-Z” phase. Conversely, this latter phase did not contain precipitates of the UO2-type material, (2) Xe bubbles were found almost exclusively in the “high-Z” phase and in the particular example shown, the Zr-containing variant. Further work in this area should address whether this potential Xe preference for just one of the high-Z phases is indeed a real effect.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interplay of strain and phase evolution of laser powder bed fusion Ti–6Al–4V

While additive manufacturing (AM) provides a method of producing geometrically complex and highly detailed structures, the generation of residual strain in AM processes like laser powder bed fusion (L-PBF) can negatively impact performance-enabling properties. In applications such as orthopedic implants, specific performance windows require optimized microstructures in order to obtain desirable properties from multi-phase alloys like Ti–6Al–4V. This research aims to quantify the microscale origins of strain in L-PBF manufactured Ti–6Al–4V by understanding how strain is distributed at the grain and sub-grain scale, the interplay between phase evolution and strain, and examining post-processing strain relief strategies to control these features. Model spinal cage implants were manufactured from Ti–6Al–4V powder via L-PBF and then subjected to strain relieving heat treatment cycles above and below the Ti–6Al–4V β transus as a function of time and cooling rate. Residual strain was then studied via high resolution electron backscatter diffraction (HR-EBSD), and 2D strain maps with sub-micron resolution were generated for each post-processing state. It was found that macroscale thermal strains decreased with heat treatment time, but additional contributions from phase stabilizing residual strains retained primarily in the α' grains as lattice distortive strain remained. Additionally, the retention of β phase significantly changed the strain and dislocation distribution while reducing overall residual strain. In conclusion, these results were validated and reinforced with 3D mesoscopic micromechanical modeling of strain behavior across simulated microstructures, confirming that the local lattice dilation of α’ martensite is a primary contributor of microscale strain generation and retention in L-PBF Ti–6Al–4V.

36 MATERIALS SCIENCE↗

Crystallinity and microstructure in Si films grown by plasma-enhanced chemical vapor deposition: A simple atomic-scale model validated by experiments

A joint theoretical and experimental analysis of the crystalline fraction in nanocrystalline films grown by low-energy plasma enhanced chemical vapor deposition is presented. The effect of key growth parameters such as temperature, silane flux, and hydrogen dilution ratio is analyzed and modeled at the atomic scale, introducing an environment-dependent crystallization probability. A very good agreement between experiments and theory is found, despite the use of a single fitting parameter.

36 MATERIALS SCIENCE↗

A data-driven framework for permeability prediction of natural porous rocks via microstructural characterization and pore-scale simulation

Understanding the microstructure–property relationships of porous media is of great practical significance, based on which macroscopic physical properties can be directly derived from measurable microstructural informatics. However, establishing reliable microstructure–property mappings in an explicit manner is difficult, due to the intricacy, stochasticity, and heterogeneity of porous microstructures. In this paper, a data-driven computational framework is presented to investigate the inherent microstructure–permeability linkage for natural porous rocks, where multiple techniques are integrated together, including microscopy imaging, stochastic reconstruction, microstructural characterization, pore-scale simulation, feature selection, and data-driven modeling. A large number of 3D digital rocks with a wide porosity range are acquired from microscopy imaging and stochastic reconstruction techniques. A broad variety of morphological descriptors are used to quantitatively characterize pore microstructures from different perspectives, and they compose the raw feature pool for feature selection. Here high-fidelity lattice Boltzmann simulations are conducted to resolve fluid flow passing through porous media, from which reliable permeability references are obtained. The optimal feature set that best represents permeability is identified through a performance-oriented feature selection process, upon which a cost-effective surrogate model is rapidly fitted to approximate the microstructure-permeability mapping via data-driven modeling. This surrogate model exhibits great advantages over empirical/analytical formulas in terms of prediction accuracy and generalization capacity, which can predict reliable permeability values spanning four orders of magnitude. Besides, feature selection also greatly enhances the interpretability of the data-driven prediction model, from which new insights into the mechanism of how microstructural characteristics determine intrinsic permeability are obtained.

58 GEOSCIENCES↗

Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy

The evolution of microstructure under static annealing was studied for mid-thickness section of a twin-roll-cast (TRC) magnesium alloy. Annealing was performed at 300 °C and 500 °C for different times. Microstructural evolution was quantitatively analyzed, from optical micrographs, using grain path envelope analysis. Additional information from electron backscatter diffraction (EBSD) was used for addressing the possible mechanism(s). It was found that the TRC structure had a bimodal grain size, which was preserved even after annealing at 300 °C. However, the annealing at 500 °C led to a unimodal grain size. This difference in the grain size distribution created a contrasting behavior in the normalized standard deviations. This was primarily attributed to a competition between recovery and recrystallization, and their respective dominance at 300° and 500 °C. A deformation induced recrystallization recovery (DIRR) model was proposed. The proposed model could successfully address the experimental microstructural evolution. - Highlights: • Annealing of twin roll cast (TRC) magnesium alloy was done at temperatures of 300 °C and 500 °C. • TRC had bimodal structure. Bimodality preserved for annealing at 300 °C. Annealing at 500 °C led to unimodal structure. • Grain evolution was described based on the competition between recovery and recrystallization. • Deformation induced recrystallization recovery (DIRR) mechanistic model was developed.

36 MATERIALS SCIENCE↗

Harnessing metastability for grain size control in multiprincipal element alloys during additive manufacturing

Abstract Controlling microstructure in fusion-based metal additive manufacturing (AM) remains a significant challenge due to the many parameters that directly impact solidification condition. Multiprincipal element alloys (MPEAs), also known as high entropy alloys, offer a vast compositional space to design for microstructural engineering due to their chemical complexity and exceptional properties. Here, we use the FeMnCoCr system as a model platform for exploring alloy design in MPEAs for AM. By exploiting the decreasing stability of the face-centered cubic phase with increasing Mn content, we achieve notable grain refinement and breakdown of epitaxial columnar grain growth. We employ a multifaceted approach encompassing thermodynamic modeling, operando synchrotron X-ray diffraction, multiscale microstructural characterization, and mechanical testing to gain insight into the solidification physics and its ramifications on the resulting microstructure of FeMnCoCr MPEAs. This work aims toward tailoring desirable grain sizes and morphology through targeted manipulation of phase stability, thereby advancing microstructure control in AM applications.

Wakai, Akane↗

Microstructural characterization of limestone exposed to heat with XRD, SEM and TG-DSC

Highlights: • The microstructure of limestone (25 °C–800 °C) was analyzed by XRD, SEM and TG-DSC. • The microstructural properties of the crystal are anisotropic in different crystal plane directions. • Microstructure controls the macroscopic properties of limestone. - Abstract: Limestone is a common rock used in many buildings and found in underground engineering projects. After exposure to heat, for example, the occurrence of fires, the stability of limestone structures is mostly affected, which may have safety repercussions. Therefore, the impact of thermal effects on the microstructure of limestone is investigated in this study, in which 8 groups of limestone samples are exposed to different temperatures (25 °C, 100 °C, 200 °C, 300 °C, 500 °C, 600 °C, 700 °C and 800 °C), after which X-ray diffraction, differential scanning calorimetry and scanning electron microscopy are carried out. The mineral composition and the microstructure of the samples are numerically modeled, in which the diffraction peaks, full width at half maximum, integral breadth, microstrain, average domain size and dislocation density are analyzed. The macroscopic properties obtained from the results in other works in the literature including porosity, compressive strength, damage coefficients and modulus of elasticity are also compared with the parameters above. The changes in the crystal structure of two minerals, calcite and dolomite, are found to be anisotropic in the different crystal plane directions. It is also found that the limestone microstructure affects the macroscopic properties. A temperature between 200 °C to 300 °C is the critical temperature at which both the macroscopic properties and macrostructure demonstrate significant changes.

36 MATERIALS SCIENCE↗

Multiphysics Meshfree Degradation Modeling of Energy Storage Materials with Kernel Enrichment

Energy storage materials exhibit strong electro-chemo-mechanical coupling and highly anisotropic material properties, contributing to the formation and propagation of micro-cracking during charge/discharge cycling and ultimately diminishing performance and service life. With microstructural images supplied by the National Renewable Energy Laboratory (NREL), pixel-based meshfree model construction by the reproducing kernel particle method (RKPM) is used to represent the complex material microstructures that dictate the coupled physics of these systems. Traditional electro-chemo-mechanical models rely on mesh-based finite element methods, which can lead to difficulties in meshing such complex geometries and capturing crack propagation due to mesh dependency. The first kernel enrichment discussed will be the interface modified reproducing kernel (IM-RK) [1, 2], constructed by scaling a smooth kernel function with an interface-distance function to achieve strategic discontinuity types (i.e. weak discontinuities for strain discontinuities and strong discontinuities for cracks) and alleviate Gibbs oscillations near these transition zones. The IM-RK is especially useful for areas in which a known discontinuity-type is expected a priori. The second kernel enrichment to be discussed is a neural network-enhanced reproducing kernel (NN-RK) [3, 4], which is introduced to effectively model non-obvious damage and crack propagation in the material microstructures; the location, orientation, and solution transition near a localization are automatically captured by superimposed block-level NN optimizations. This NN enrichment approach allows for effective modeling of localizations via a fixed background discretization, relieving tedious efforts for adaptive refinement in traditional mesh-based methods. Applications to the heterogeneous microstructures of Li-ion battery cathodes will be presented to demonstrate the effectiveness of the proposed methods. NN-RK is additionally used to inform how crack opening and closure in turn affect the electro-chemo-mechanical responses in the material microstructure. Reference: [1] Wang, Y., Baek, J., Tang, Y. et al. "Support vector machine guided reproducing kernel particle method for image-based modeling of microstructures," Comput Mech 73, 907-942 (2024). https://doi.org/10.1007/s00466-023-02394-9. [2] Susuki, K., Allen, J. & Chen, J. S.. "Image-based modeling of coupled electro-chemo-mechanical behavior of Li-ion battery cathode using an interface-modified reproducing kernel particle method," Engineering with Computers (2024). https://doi.org/10.1007/s00366-024-02016-9. [3] Baek, J., Chen, J. S., Susuki, K., "Neural Network enhanced Reproducing Kernel Particle Method for Modeling Localizations," International Journal for Numerical Methods in Engineering, Vol. 123, 4422-4454 (2022). https://doi.org/10.1002/nme.7040.

25 ENERGY STORAGE↗

Materials Characterization, Prediction and Control Project: Summary Report on Data Analytics Framework

This report summarizes the activities performed under the data analytics Vertex in the Materials Characterization, Prediction and Control Project funded under laboratory directed research and development at Pacific Northwest National Laboratory. The data analytics Vertex developed models for associating global or local process parameters, microstructural features, and performance properties of friction-stir-processed 316L stainless steel plates. Statistical, machine learning, and deep learning models, as well as generative artificial intelligence approaches, were used to develop the associations between the process-structure-property data streams. These associations formed the basis for predicting global properties of parts manufactured under different process envelopes, providing a basis for predicting performance using data driven as well as physics-informed and physics-constrained approaches. Additionally, the associations were used to predict local process parameters and microstructural features of the product, predictive relationships that have the potential to form the basis of a control framework that could eventually modulate a friction-stir process to maintain product quality.

316L stainless steel↗

Microstructure in matrix elements

We investigate the simple model of Pennington, Shenker, Stanford and Yang for modeling the density matrix of Hawking radiation, but further include dynamics for EOW branes behind the horizon. This allows interactions that scatter one interior state to another, and also allows EOW loops. At strong coupling, we find that EOW states are no longer random; the ensemble has collapsed, and coupling constants encode the microscopic matrix elements of Hawking radiation. This suggests strong interior dynamics are important for understanding evaporating black holes, without any ensemble average. In this concrete model the density matrix of the radiation deviates from the thermal state, small off-diagonal fluctuations encode equivalences between naively orthogonal states, and bound the entropy from above. For almost evaporated black holes the off-diagonal terms become as large as the diagonal ones, eventually giving a pure state. We also find the unique analytic formula for all Renyi entropies.

2D gravity↗

Nuclear Graphite - Fracture Behavior and Modeling

Evidence for the graphite fracture mechanism is reviewed and discussed. The roles of certain microstructural features in the graphite fracture process are reported. The Burchell fracture model is described and its derivation reported. The successful application of the fracture model to uniaxial tensile data from several graphites with widely ranging structure and texture is reported. The extension of the model to multiaxial loading scenarios using two criteria is discussed. Initially, multiaxial strength data for H-451 graphite were modeled using the fracture model and the Principle of Independent Action. The predicted 4th stress quadrant failure envelope was satisfactory but the 1st quadrant predictions were not conservative and thus were unsatisfactory. Multiaxial strength data from the 1st and 4th stress quadrant for NBG-18 graphite are reported. To improve the conservatism of the predicted 1st quadrant failure envelope for NBG-18 the Shetty criterion has been applied to obtain the equivalent critical stress intensity factor, KIc (Equi), for each applied biaxial stress ratio. The equivalent KIc value is used in the Burchell fracture model to predict the failure envelope. The predicted 1st stress quadrant failure envelope is conservative and thus more satisfactory than achieved previously using the fracture model combined with the Principle of Independent Action.

36 MATERIALS SCIENCE↗

Scaling kinetic Monte-Carlo simulations of grain growth with combined convolutional and graph neural networks

Graph neural networks (GNN) have emerged as a promising machine learning method for microstructure simulations such as grain growth. However, accurate modeling of realistic grain boundary networks requires large simulation cells, which GNN has difficulty scaling up to. To alleviate the computational costs and memory footprint of GNN, we suggest a hybrid architecture combining a convolutional neural network (CNN) based bijective autoencoder to compress the spatial dimensions, and a GNN that evolves the microstructure in the latent space of reduced spatial sizes. Our results demonstrate that the new design significantly reduces computational costs with using fewer message passing layer (from 12 down to 3) compared with GNN alone. The reduction in computational cost becomes more pronounced as the spatial size increases, indicating strong computational scalability. For the largest mesh evaluated (160 3 ), our method reduces memory usage and runtime in inference by 117× and 115×, respectively, compared with GNN-only baseline. More importantly, it shows higher accuracy and stronger spatiotemporal capability than the GNN-only baseline, especially in long-term testing. Such combination of scalability and accuracy is essential for simulating realistic material microstructures over extended time scales. The improvements can be attributed to the bijective autoencoder’s ability to compress information losslessly from spatial domain into a high dimensional feature space, thereby producing more expressive latent features for the GNN to learn from, while also contributing its own spatiotemporal modeling capability. Training data are generated from stochastic grain growth simulations, providing realistic variability for learning robust microstructure evolution. Comprehensive system validation confirms that the model is accurate, robust, and scalable.

36 MATERIALS SCIENCE↗

A finite element model investigation of ultrasonic array performance for inspecting polycrystalline materials

Microstructural noise has long hindered ultrasonic NDE of polycrystalline materials. In recent years however, arrays have enabled new possibilities to advance ultrasonic inspection of these materials. A Finite Element (FE) model is used to explore the different phenomena caused by grain scattering which may hinder detection of defects by an array. These include multiple scattering and beam deviation due to anisotropy; two aspects of the physics which are often required to be ignored in analytical models due to theoretical assumptions or computational limitations. We rely on a GPU based FE solver, Pogo, to provide fast computation and thereby enable parametric studies. The impact on array detection performance when varying center-frequency and aperture size is investigated. Preliminary results show that there exists an optimum for both the array aperture and frequency for inspection of these materials.

36 MATERIALS SCIENCE↗

Micropolar deep material network

This study extends the Deep Material Network (DMN), a physics-informed machine learning framework, to predict the homogenized mechanical response of composite materials with micropolar (Cosserat-type) constitutive behavior. This extension incorporates microstructure-dependent size effects, enabling accurate, efficient, and size-aware predictions for composites with complex internal architectures. While traditional, direct numerical simulation micropolar models effectively capture size effects by introducing extra local degrees of freedom, they bring significant computational challenges, particularly for multiscale analyses relevant to engineering applications. The micropolar DMN developed in this paper achieves high accuracy while significantly reducing computation time compared to micropolar direct numerical simulations. This advancement enables multiscale analyses and parameter studies that were previously impractical, such as high-cycle fatigue simulations and comprehensive investigations of internal length scale effects notably in size-dependent plastic response and the optimization of lattice structures. By uniting microstructure-sensitive modeling, physics-driven learning, and scalable surrogate modeling, the micropolar DMN paves the way for accelerated material design, large-scale parametric studies, and the reliable incorporation of size-dependent effects across a wide range of engineering applications, including optimization and next-generation composite design.

36 MATERIALS SCIENCE↗

Study of High Fluence Radiation-induced Swelling and Hardening under Light Water Reactor Conditions

This report documents a comprehensive model that has been developed to enable simulations of microstructural evolution under the irradiation conditions typical of light water reactor (LWR) internal components. The model, which accounts cascade production of point defects and vacancy, interstitial faulted dislocation loops, interstitial clusters migrating one-dimensionally and the evolution of the network dislocation structure, has been parameterized to account damage accumulation in austenitic stainless steels. Nucleation and growth of an ensemble of cavities is based on accounting the residual and produced by irradiation He atoms and existence of the dislocation and production biases. Additional applications and potential future developments for the model are also discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Structural Materials and Cladding

Advanced nuclear energy systems, both fission- and fusion-based, aim to operate at higher temperatures and greater radiation exposure levels than experienced in current light water reactors. Additionally, they are envisioned to operate in coolants such as helium and sodium that allow for higher operating temperatures. Because of these unique environments, different requirements and challenges are presented for both structural materials and fuel cladding. For core and cladding applications in intermediate-temperature reactors (400-650 C), the primary candidates are 9-12Cr ferritic-martensitic steels (where the numbers represent the weight percentage of Cr in the material, i.e., 9-12 wt%) and advanced austenitic steels, adapted to maximize high temperature strength without compromising lower temperature toughness. For very high temperature reactors (>650 C), strength and oxidation resistance are more critical. In such conditions, high-temperature metals as well as ceramics and ceramic composites are candidates. For all advanced systems operating at high pressures, performance of the pressure boundary materials (i.e., those components responsible for containing the high-pressure liquids or gases that cool the reactor) is critical to reactor safety. For some reactors, pressure vessels are anticipated to be significantly larger and thicker than those used in light water reactors. The properties through the entire thickness of these components, including the effects of radiation damage as a function of damage rate, are important. For all of these advanced systems, optimizing the microstructures of candidate materials will allow for improved radiation and high-temperature performance in nuclear applications, and advanced modeling tools provide a basis for developing optimized microstructures.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗