Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lamination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Behavior of spinning laminated composite plates with initial twist-experimental vibrations, strain, and deflection results

The experimental behavior of spinning, pre-twisted laminated composite plates was investigated. The purpose of these experiments was to establish an experimental database consisting of strain, deflections, and natural frequencies as a function of rotational velocity. Six different plate sets were tested, that included three different stacking sequences (two symmetric, one asymmetric), two different initial twist levels (0 deg, 30 deg), and two different initial twist axis locations (midchord, quarter-chord). The plates were spin tested at four different combinations of pitch and sweep. It was observed that the location of the pretwist axis and the level of pretwist greatly affects the strain and deflections of the spinning plate, while only the pretwist level affects the measured natural frequencies.

Lapid, A. J.↗
NASA NTRS1993

Scaling effects in sublaminate-scaled composite laminates

A series of tensile tests have been carried out to determine the effect of specimen size on the mechanical response of composite laminates which were scaled at the sublaminate level. Two material systems were studied AS4/3502 and AS4/PEEK. The effect of specimen size was examined with respect to first ply failure stress, delamination stress, ultimate stress, and strain at failure. In general, the strength of scaled specimens increased with increasing specimen size. Several models from the published literature were applied with varying degrees of success to predict the first ply failure and delamination stress in scaled composites. It was found that the effect of ply constraint is not addressed properly in the existing theories.

Kellas, Sotiris↗
NASA NTRS1993

A mixed formulation for interlaminar stresses in dropped-ply laminates

A structural model is developed for the linear elastic response of structures consisting of multiple layers of varying thickness such as laminated composites containing internal ply drop-offs. The assumption of generalized plane deformation is used to reduce the solution domain to two dimensions while still allowing some out-of-plane deformation. The Hellinger-Reissner variational principle is applied to a layerwise assumed stress distribution with the resulting governing equations solved using finite differences.

Harrison, Peter N.↗
NASA NTRS1993

Postbuckling of laminated flat and curved panels under combined thermal and mechanical loadings

The static postbuckling of simply-supported, symmetrically laminated composite and single-layered flat and doubly-curved shallow panels, subjected to both a stationary non-uniform temperature field and a system of mechanical loadings is investigated. A number of non-classical effects related to the transverse shear flexibility of constituent materials, the unavoidable initial geometric imperfections and the character of tangential boundary conditions are considered and pertinent conclusions about their role on the postbuckling response are emphasized. Throughout the paper the results based upon a higher-order theory are compared with their first order shear deformable and classical counterparts, and conclusions related to their range of applicability are outlined.

Librescu, L.↗
NASA NTRS1993

Compression of laminated composite beams with initial damage

The effect of isolated damage modes on the compressive strength and failure characteristics of laminated composite test specimens were evaluated experimentally and numerically. In addition to specimens without initial damage, specimens with three types of initial damage were considered: (1) specimens with short delaminations distributed evenly through the specimen thickness, (2) specimens with few long delaminations, and (3) specimens with local fiber damage in the surface plies under the three-point bend contact point. It was found that specimens with short multiple delamination experienced the greatest reduction in compression strength compared to the undamaged specimens. Single delaminations far from the specimen surface had little effect on the final compression strength, and moderate strength reduction was observed for specimens with localized surface ply damage.

Breivik, Nicole L.↗
NASA NTRS1992

Environmental effects on long term behavior of composite laminates

Model equations are presented for approximate methods simulating the long-term behavior of composite materials and structures in hot/humid service environments. These equations allow laminate property upgradings with time, and can account for the effects of service environments on creep response. These methodologies are illustrated for various individual and coupled temperature/moisture, longitudinal/transverse, and composite material type cases. Creep deformation is noted to rise dramatically for cases of matrix-borne, but not of fiber-borne, loading in hot, humid environments; the coupled influence of temperature and moisture is greater than a mere combination of their individual influences.

Singhal, S. N.↗
NASA NTRS1993

Optimization of composite laminates

Design of composite structures can be viewed as a multi-faceted task, one which requires integration of issues related to composite mechanics, structural analysis, optimization, and manufacturing. The major coverage of the paper is on the issue of optimization, with special emphasis on the use of optimization for designing with discrete and integer valued variables required for the stacking-sequence optimization. Different techniques that can be used for stacking sequence optimization are introduced, and different aspects of their application are demonstrated for laminate buckling optimization.

Gurdal, Zafer↗
NASA NTRS1992

Structural similitude and scaling laws for laminated beam-plates

The establishment of similarity conditions between two structural systems is discussed. Similarity conditions provide the relationship between a scale model and its prototype and can be used to predict the behavior of the prototype by extrapolating the experimental data of the corresponding small-scale model. Since satisfying all the similarity conditions simultaneously is difficult or even impossible, distorted models with partial similarity (with at least one similarity condition relaxed) are more practical. Establishing similarity conditions based on both dimensional analysis and direct use of governing equations is discussed, and the possibility of designing distorted models is investigated. The method is demonstrated through analysis of the cylindrical bending of orthotropic laminated beam-plates subjected to transverse line loads.

Simitses, G. J.↗
NASA NTRS1993

Transverse cracking and stiffness reduction in composite laminates

A study of transverse cracking mechanism in composite laminates is presented using a singular hybrid finite element model. The model provides the global structural response as well as the precise local crack-tip stress fields. An elasticity basis for the problem is established by employing Lekhnitskii's complex variable potentials and method of eigenfunction expansion. Stress singularities associated with the transverse crack are obtained by decomposing the deformation into the symmetric and antisymmetric modes and proper boundary conditions. A singular hybrid element is thereby formulated based on the variational principle of a modified hybrid functional to incorporate local crack singularities. Axial stiffness reduction due to transverse cracking is studied. The results are shown to be in very good agreement with the existing experimental data. Comparison with simple shear lag analysis is also given. The effects of stress intensity factors and strain energy density on the increase of crack density are analyzed. The results reveal that the parameters approach definite limits when crack densities are saturated, an evidence of the existence of characteristic damage state.

Yuan, F. G.↗
NASA NTRS1941

The Creep of Laminated Synthetic Resin Plastics

The long-time loading strength of a number of laminated synthetic resin plastics was ascertained and the effect of molding pressure and resin content determined. The best value was observed with a 30 to 40 percent resin content. The long-time loading strength also increases with increasing molding pressure up to 250 kg/cm(exp 2); a further rise in pressure affords no further substantial improvement. The creep strength is defined as the load which in the hundredth hour of loading produces a rate of elongation of 5 X 10(exp -4) percent per hour. The creep strength values of different materials were determined and tabulated. The effect of humidity during long-term tests is pointed out.

Perkuhn, H↗
NASA NTRS1993

Effect of Impact Damage and Open Hole on Compressive Strength of Hybrid Composite Laminates

Impact damage tolerance is a frequently listed design requirement for composites hardware. The effect of impact damage and open hole size on laminate compressive strength was studied on sandwich beam specimens which combine CFRP-GFRP hybrid skins and a syntactic foam core. Three test specimen configurations have been investigated for this study. The first two were sandwich beams which were loaded in pure bending (by four point flexure). One series had a skin damaged by impact, and the second series had a circular hole machined through one of the skins. The reduction of compressive strength with increasing damage (hole) size was compared. Additionally a third series of uniaxially loaded open hole compression coupons were tested to generate baseline data for comparison with both series of sandwich beams.

Hiel, Clement↗
NASA NTRS1992

A comparative evaluation of in-plane shear test methods for laminated graphite-epoxy composites

The objectives were to evaluate popular shear test methods for various forms of graphite-epoxy composite materials and to determine the shear response of graphite-epoxy composites with various forms of fiber architecture. Numerical and full-field experimental stress analyses were performed on four shear test configurations for unidirectional and bidirectional graphite-epoxy laminates to assess the uniformity and purity of the shear stress (strain) fields produced in the specimen test section and to determine the material in-plane shear modulus and shear response. The test methods were the 10 deg off-axis, the +/- 45 deg tension, the Iosipescu V-notch, and a compact U-notch specimen. Specimens were prepared from AS4/3501-6 graphite-epoxy panels, instrumented with conventional strain gage rosettes and with a cross-line moire grating, and loaded in a convenient testing machine. The shear responses obtained for each test method and the two methods of specimen instrumentation were compared. In a second phase of the program the shear responses obtained from Iosipescu V-notch beam specimens were determined for woven fabric geometries of different weave and fiber architectures. Again the responses of specimens obtained from strain gage rosettes and moire interferometry were compared. Additional experiments were performed on a bidirectional cruciform specimen which was also instrumented with strain gages and a moire grating.

Morton, John↗
NASA NTRS1993

Modeling of failure and response to laminated composites subjected to in-plane loads

An analytical model was developed for predicting the response of laminated composites with or without a cutout and subjected to in-plane tensile and shear loads. Material damage resulting from the loads in terms of matrix cracking, fiber-matrix shearing, and fiber breakage was considered in the model. Delamination, an out-of-plane failure mode, was excluded from the model.

Shahid, Iqbal↗
NASA NTRS1993

Delamination, durability, and damage tolerance of laminated composite materials

Durability and damage tolerance may have different connotations to people from different industries and with different backgrounds. Damage tolerance always refers to a safety of flight issue where the structure must be able to sustain design limit loads in the presence of damage and return to base safely. Durability, on the other hand, is an economic issue where the structure must be able to survive a certain life under load before the initiation of observable damage. Delamination is typically the observable damage mechanism that is of concern for durability, and the growth and accumulation of delaminations through the laminate thickness is often the sequence of events that leads to failure and the loss of structural integrity.

Obrien, T. Kevin↗
NASA NTRS1994

Out of plane gradients in laminated composites

The research under this grant focused on three different, but related, research projects. All three projects were concerned with predicting the interlaminar stresses that develop in laminated composites in the presence of free edges. The first project was dedicated to the development of a new semi-analytical approximate solution for predicting interlaminar stresses. The second project was devoted to a study of the influence of boundary conditions, geometric parameters, and material modelling on interlaminar stresses in stiffened composite panels. The third project was dedicated to the development of a new finite element for efficient analysis of interlaminar stresses in curved, stiffened panels. A summary of each of the projects is given.

Herakovich, Carl T.↗
NASA NTRS1993

The experimental behavior of spinning pretwisted laminated composite plates

The purpose of the research is to gain an understanding of the material and geometric couplings present in advanced composite turbo-propellers. Twelve pre-twisted laminated composite plates are tested. Three different ply lay-ups (2 symmetric and 1 asymmetric) and four different geometries (flat and 30x pre-twist about the mid-chord, quarter-chord, and leading edge) distinguish each plate from one another. Four rotating and non-rotating tests are employed to isolate the material and geometric couplings of an advanced turbo propeller. The first series of tests consist of non-rotating static displacement, strain, and vibrations. These tests examine the effects of ply lay-up and geometry. The second series of tests consist of rotating displacement, strain, and vibrations with various pitch and sweep settings. These tests utilize the Dynamic Spin Rig Facility at the NASA Lewis Research Center. The rig allows the spin testing of the plates in a near vacuum environment. The tests examine how the material and plate geometry interact with the pitch and sweep geometry of an advanced turbo-propeller.

Kosmatka, John B.↗
NASA NTRS1994

Laminated thermoplastic composite material from recycled high density polyethylene

The design of a materials-science, educational experiment is presented. The student should understand the fundamentals of polymer processing and mechanical property testing of materials. The ability to use American Society for Testing and Materials (ASTM) standards is also necessary for designing material test specimens and testing procedures. The objectives of the experiment are (1) to understand the concept of laminated composite materials, processing, testing, and quality assurance of thermoplastic composites and (2) to observe an application example of recycled plastics.

Liu, Ping↗