Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high temperature superconducting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Characterization of MgB2 Superconducting Hot Electron Bolometers

Hot-Electron Bolometer (HEB) mixers have proven to be the best tool for high-resolution spectroscopy at the Terahertz frequencies. However, the current state of the art NbN mixers suffer from a small intermediate frequency (IF) bandwidth as well as a low operating temperature. MgB2 is a promising material for HEB mixer technology in view of its high critical temperature and fast thermal relaxation allowing for a large IF bandwidth. In this work, we have fabricated and characterized thin-film (approximately 15 nanometers) MgB2-based spiral antenna-coupled HEB mixers on SiC substrate. We achieved the IF bandwidth greater than 8 gigahertz at 25 degrees Kelvin and the device noise temperature less than 4000 degrees Kelvin at 9 degrees Kelvin using a 600 gigahertz source. Using temperature dependencies of the radiation power dissipated in the device we have identified the optical loss in the integrated microantenna responsible as a cause of the limited sensitivity of the current mixer devices. From the analysis of the current-voltage (IV) characteristics, we have derived the effective thermal conductance of the mixer device and estimated the required local oscillator power in an optimized device to be approximately 1 microwatts.

Superconducting Devices↗
DOE OSTI2020

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Superconducting radio-frequency cavities are commonly used in modern particle accelerators for applied and fundamental research. Such cavities are typically made of high-purity, bulk Nb and with cooling by a liquid helium bath at a temperature of ~2 K. The size, cost and complexity of operating a particle accelerator with a liquid helium refrigerator make the current cavity technology not favorable for use in industrial-type accelerators. We have developed a multi-metallic 1.495 GHz elliptical cavity conductively cooled by a cryocooler. The cavity has a ~2 µm thick layer of Nb 3 Sn on the inner surface, exposed to the rf field, deposited on a ~3 mm thick bulk Nb shell and a bulk Cu shell, of thickness $\geqslant\! 5$ mm deposited on the outer surface by electroplating. A bolt-on Cu plate 1.27 cm thick was used to thermally connect the cavity equator to the second stage of a Gifford-McMahon cryocooler with a nominal capacity of 2 W at 4.2 K. The cavity was tested initially in liquid helium at 4.3 K and reached a peak surface magnetic field of ~36 mT with a quality factor of 2 × 10 9 . The cavity cooled by the cryocooler achieved a peak surface magnetic field of ~29 mT, equivalent to an accelerating gradient of 6.5 MV m –1 . The conduction-cooled cavity could be operated in continuous-wave with as high as 5 W dissipation in the cavity for 1 h without any thermal breakdown, because of the Cu outer layer with high thermal conductivity. This result represents a paradigm shift in the technology of superconducting accelerator cavities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Analysis of furnace contamination on superconducting radio frequency niobium using secondary-ion mass spectrometry

Detection of surface contamination on niobium materials used in superconducting radio frequency (SRF) applications is difficult due to quantitative sensitivity and near-atomic depth resolution needed. Inspection of samples known to have experienced surface contamination was found to have inconsistent nitride coverage after high-temperature nitrogen gas exposure (“doping”). Here we compare contaminating species found on samples treated in several different vacuum furnaces, both “exposed” directly in the chamber and “protected” by containment shielding from evaporative sources with “furnace caps.” Typically, furnace caps are used to impede contamination from reaching the interior surface of cavities during the high-temperature vacuum bake that immediately precedes exposure to nitrogen gas. Although, to date, little is known about the effectiveness of these caps, SIMS results showed that they were effective in limiting contamination arising from the furnace environment. Inspection of sample surfaces by SEM showed a lack of nitrides present on contaminated specimens. TEM with energy dispersive spectroscopy performed on these samples revealed that a carbon-rich layer now existed, indicating that a relatively high contaminant load prevents the nucleation and growth of surface nitrides, while thus inhibiting interstitial nitrogen uptake. Except in extreme cases, subsequent removal of the top several micrometers of the surface via electropolishing appears to effectively eliminate any strong influence on the subsequent SRF cavity performance. With the absence of furnace cleaning, carbon contamination was found to be nearly 10× higher for protected nitrogen-doped and electropolished samples, with minimal metallic contamination detected for both processes. SIMS analysis was also performed to compare the cleanliness of samples fully prepared by such nitrogen “doping” with those prepared by a related process, involving the dissolution of niobium surface oxide and diffusion of oxygen into the surface. This oxygen doping or alloying process offers attractive advantages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

INVESTIGATION OF THE MULTILAYER SHIELDING EFFECT THROUGH NbTiN-AlN COATED BULK NIOBIUM

Superconducting radio frequency (SRF) cavities, composed of bulk niobium (Nb), are extensively utilized in particle accelerators. To optimize their performance and extend their operational range, thin films of superconducting materials are applied to the Nb surfaces. This study focuses on investigating the magnetic field penetration characteristics of NbTiN-AlN coating on bulk niobium. The experimental setup involves measuring the magnetic field penetration across flat superconducting samples at cryogenic temperatures. One key parameter of interest is the field just before the first flux penetration, Bp which enables the observation of the multilayer shielding effect on bulk niobium under high magnetic fields. The study reveals a significant enhancement in Bp of the NbTiN-AlN coated Nb samples compared to bare Nb samples. This property holds critical importance for achieving high field performance in SRF cavities. Furthermore, the study explores the relationship between coating thickness and Bp corroborating the theoretical predictions.

Senevirathne, I. H.↗
NASA NTRS2004

Superconducting Digital Multiplexers for Sensor Arrays

Arrays of cryogenic microbolometers and other cryogenic detectors are being developed for infrared imaging. If the signal from each sensor is amplified, multiplexed, and digitized using superconducting electronics, then this data can be efficiently read out to ambient temperature with a minimum of noise and thermal load. HYPRES is developing an integrated system based on SQUID amplifiers, a high-resolution analog-to-digital converter (ADC) based on RSFQ (rapid single flux quantum) logic, and a clocked RSFQ multiplexer. The ADC and SQUIDs have already been demonstrated for other projects, so this paper will focus on new results of a digital multiplexer. Several test circuits have been fabricated using Nb Josephson technology and are about to be tested at T = 4.2 K, with a more complete prototype in preparation.

Kadin, Alan M.↗
NASA NTRS2007

Studies of the Superconducting Transition in the Mo/Au-Bilayer Thin Films

At NASA Goddard, microcalorimeter arrays using superconducting transition edge sensor thermometers (TESs) are under development for high energy resolution X-ray astrophysics applications. We report on our studies of the superconducting transition in our Mo/Au-bilayer TES films including: low current measurements of the superconducting bilayer's resistance transition versus temperature on pixels with different normal metal absorber attachment designs and measured temperature scaling of the critical current and critical magnetic field.

Sadleir, John↗
DOE OSTI2024

Molecular beam epitaxy of superconducting zirconium nitride on GaN substrates

Epitaxial integration of metals and semiconductors can enable enhanced performance and novel functionality. Achieving such pristine interfaces with superconducting materials is of increasing interest for quantum devices and detectors, but the experimental demonstration remains challenging, given the very limited studies on single crystalline systems. To expand the potential materials for these systems, this work explores the deposition of zirconium nitride superconducting thin films on GaN substrates at various temperatures using molecular beam epitaxy. A general trend of decreasing superconducting critical temperature is observed as the deposition temperature is reduced. The optical properties reveal a transition from metallic to dielectric behavior with colder deposition. The plasma frequency of the metallic films is also observed to be a function of growth temperature. These results pave the way for the integration of a highly tunable metal nitride with a well-established semiconductor system.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Performance of a high T (sub c) superconducting ultra-low loss microwave stripline filter

Discussed here is the successful fabrication of a five-pole interdigital stripline filter made of the 93 K superconductor (Y1Ba2Cu3O sub y) coated on a silver substrate, with center frequency of 8.5 GHz and an extremely high rejection ratio of 80 dB. The lowest injection loss measured was 0.1 dB at 12 K, with a return loss of better than 16 dB, representing a significant improvement over a similar copper filter, and is comparable to low critical temperature filters. The insertion loss appears to be limited by extrinsic factors, such as tuning mismatch and joint losses, and not by superconducting material losses.

Bautista, J. J.↗
DOE OSTI2022

Orbital selective Kondo effect in heavy fermion superconductor UTe2

Abstract Heavy fermion systems emerge from the collective Kondo effect, and their superconductivity can serve as a promising platform for realizing next-generation quantum technologies. However, it has been a great challenge to explore many-body effects in heavy fermion systems with ab-initio approaches. We computed the electronic structure of UTe 2 without purposive judgements, such as intentional selection of on-site Coulomb interaction and disregarding spin-orbit coupling. We show that U-5 f electrons are highly localized in the paramagnetic normal state, giving rise to the Kondo effect. It is also found that the hybridization between U-5 f and U-6 d predominantly in the orthorhombic a b -plane is responsible for the high-temperature Kondo effect. In contrast, the hybridization between U-5 f and Te-5 p along the c -axis manifests the Kondo scattering at a much lower temperature, which could be responsible for the low-temperature upturn of the c -axis resistivity. Our results show that the electron correlation in UTe 2 is orbital selective, which naturally elucidates the recent experimental observations of anomalous temperature dependence of resistivity. Furthermore, we suggest that the Kondo effect is suppressed at high pressure owing to weak localization of magnetic moments, which results from enhanced U-5 f electron hopping. Our discovery provides significant insight toward understanding anisotropic quantum behavior including selective re-entrant superconductivity in heavy fermion UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Aspects of the normal state resistivity of cuprate superconductors

Planar normal state resistivity data taken from three families of cuprate superconductors are compared here with theoretical calculations from the recent extremely correlated Fermi liquid theory (ECFL). The two hole doped cuprate materials LSCO and BSLCO and the electron doped material LCCO have yielded rich data sets at several densities δ and temperatures T, thereby enabling a systematic comparison with theory. The recent ECFL resistivity calculations for the highly correlated t-t'-J model by us give the resistivity for a wide set of model parameters. After using X-ray diffraction and angle resolved photoemission data to fix parameters appearing in the theoretical resistivity, only one parameter, the magnitude of the hopping t, remains undetermined. For each data set, the slope of the experimental resistivity at a single temperature-density point is sufficient to determine t, and hence the resistivity on absolute scale at all remaining densities and temperatures. This procedure is demonstrated to give a fair account of the entire data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

Performance of a high T(sub c) superconducting ultra-low loss microwave stripline filter

Discussed here is the successful fabrication of a five-pole interdigital stripline filter made of the 93-K superconductor (Y1Ba2Cu3O(y)) coated on a silver substrate, with center frequency of 8.5 GHz and an extremely high rejection ratio of 80 dB. The lowest insertion loss measured was 0.1 dB at 12 K, with a return loss of better than 16 dB, representing a significant improvement over a similar copper filter; it is comparable to low critical temperature filters. The insertion loss appears to be limited by extrinsic factors, such as tuning mismatch and joint losses, and not by the superconducting material losses.

Bautista, J. J.↗
DOE OSTI2020

Fermi Gases in Bichromatic Superlattices

The purpose of the program is the broad study of designer materials made of ultra-cold atoms and light, which provides new paradigms for emulating exotic layered systems. Bichromatic superlattices enable control and study of both dimensionality and dispersion in layered, strongly correlated Fermi gases, to model high-temperature superfluidity/superconductivity. Most layered materials are quasi-two-dimensional, neither two-dimensional, like a sheet, nor three-dimensional, like a gas, but somewhere in between. In quasi-2D layers with an unequal number of spin-up and spin-down electrons, particularly strong attraction between pairs of electrons with opposite spins is predicted to achieve the highest possible superconducting transition temperatures. To understand these materials, we emulate them with a layered, ultra-cold Fermi gas of 6Li atoms, magnetically tuned near a collisional (Feshbach) resonance, where precise control of the attraction, spin-composition, dimensionality and dispersion provides new tests of theory. The primary goals are of the program are: (1) Elucidation of the effects of dimensionality and confining potential shape on the enhancement of high-temperature superfluidity in a layered, strongly correlated Fermi gases; (2) Control of dispersion and the study of tunable Dirac points in one dimension.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Test Of A Microwave Amplifier With Superconductive Filter

Report describes design and low-temperature tests of low-noise GaAs microwave amplifier combined with microstrip band-pass filter. Two versions of microstrip filter used in alternate tests; in one version, microstrips formed as films of high-transition-temperature superconductor Y/Ba/Cu/O on lanthanum aluminate substrate with gold film as ground plane. Other version identical except microstrips as well as ground plane made of gold, normally conductive.

Bhasin, K. B.↗
DOE OSTI2025

Thermally induced structural competitiveness and metastability of body-centered-cubic iron under nonequilibrium conditions

The structure and stability of iron near melting at multi-megabar pressures are of significant interest in high pressure physics and earth and planetary sciences. While the body-centered cubic (BCC) phase is generally recognized as unstable at lower temperatures, its stability relative to the hexagonal close-packed (HCP) phase at high temperatures (approximately 0.5 eV) in the Earth’s inner core (IC) remains a topic of ongoing theoretical and experimental debate. Motivated by a series of studies attempting to understand the state of the IC and resulting in contradictory findings, we aim to explore the physical factors that may contribute to this confusion in a broader context. Our ab initio calculations show a significant drop in energy, the emergence of a plateau and a local minimum in the potential energy surface, and stabilization of all phonon modes of BCC iron at elevated electron temperatures (>1–1.5 eV). These effects increase the competition among the BCC, HCP, and the face-centered cubic (FCC) phases and lead to the metastability of the BCC structure. Furthermore, at pressure-temperature conditions relevant to the IC, we can expect substantial coexistence of FCC and HCP iron due to their similar free energies and low transition barrier (∼0.2 eV/atom), and the thermodynamic stability of BCC iron is enhanced by its substantial lattice vibration entropy. In conclusion, these findings provide a clear theoretical framework for understanding iron phase relations and solidification processes, both experimentally and in the IC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Low Noise Frequency-Domain Multiplexing of TES Bolometers Using SQUIDs at Sub-Kelvin Temperature

Digital Frequency-Domain Multiplexing (DfMux) is a technique that uses MHz superconducting resonators and Superconducting Quantum Interference Device (SQUID) arrays to read out sets of transition edge sensors. DfMux has been used by several Cosmic Microwave Background experiments, including most recently POLARBEAR-2 and SPT-3 G with multiplexing factors as high as 68, and is the baseline readout technology for the planned satellite mission LiteBIRD. Here, we present recent work focused on improving DfMux readout noise, reducing parasitic impedance, and improving sensor operation. We have achieved a substantial reduction in stray impedance by integrating the sensors, resonators, and SQUID array onto a single-carrier board operated at 250 mK. This also drastically simplifies the packaging of the cryogenic components and leads to better-controlled crosstalk. We demonstrate a low readout noise level of 8.6 pA/Hz1 1/2 , which was made possible by operating the SQUID array at a reduced temperature and with a low dynamic impedance. This is a factor of two improvement compared to the achieved readout noise level in currently operating Cosmic Microwave Background experiments using DfMux and represents a critical step toward maturation of the technology for the next generation of instruments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Transient superconductivity at nano- and meso-scales

High-T c superconductivity is surpassed by few, if any, other unsolved problems in contemporary physics in terms of its richness, complexity, impact on other fields, and potential technological importance in energy applications. Recent discoveries reveal that the highest transition temperatures emerge under extraordinary experimental conditions such as the strong perturbation of a single atomic layer material by the underlying substrate, application of ~200 GPa pressure or ~MV/cm static electric fields, or irradiation by intense femtosecond optical fields. Research in superconductivity under extreme experimental conditions is challenging and requires the development of novel experimental methods and new theoretical tools suitable to tackle the problem. Our team has approached the challenges of transient superconductivity under intense optical fields by rethinking the types of experimental observables that are best suited to elucidate the physics of light-induced effects. This exercise has identified the need for: i) ultra-fast spatio-temporal probes enabling access to plasmonic properties and also nano-scale inhomogeneities that are ubiquitous in unconventional superconductors; ii) meso-scale structures and hybrid meta-surfaces imperative for strong enhancement of optical fields and iii) theoretical approaches suitable to explain and predict the response of superconductors under ultra-fast photo-excitation. Co-PIs have already made major advances with developing capabilities i)-iii). Therefore, our team is poised to make significant progress in transient superconductivity by exploring novel spatio-temporal effects that currently remain unattainable. Co-investigators will search for light-induced superconductivity in the high-T c cuprates to build upon spectacular recent results still lacking independent confirmations. Novel data acquisition methods combined with nano-plasmonic imaging will allow our team to test the hypothesis of photo-induced superconducting pairing. Spatio-temporal experiments will provide insights into the interplay between superconductivity and competing orders in the cuprates. Co-PIs will also investigate strong light-matter interaction and superconductivity in FeSe monolayers. Finally, we will study spatio-temporal electrodynamics of planar Josephson junctions. This latter direction will allow our team to thoroughly characterize one of the most fundamental examples of inhomogeneity in all of unconventional superconductivity. The proposed experiments in combination with theoretical analysis will provide information that is difficult to obtain using alternative methods. Basov and Averitt will carry out pump-probe spectroscopy and nano-imaging experiments. Averitt and Hone will design and fabricate state-of-the-art meta-surfaces. Theoretical and computational studies of ultrafast transient phenomena will be carried out by Millis and Fogler. Modeling of time-resolved nano-optical effects will be done by Fogler. The bulk of the requested budget will be used to support graduate students at Columbia & UCSD that will be co-supervised by co-PIs. The proposed program is transformative, since it will enable an entire suite of experiments previously either impossible or technically implausible. It will deliver critically important insights not only into mechanisms of unconventional superconductivity but also to many other correlated quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconductivity in type-II Weyl-semimetal WTe 2 induced by a normal metal contact

WTe 2 is a material with rich topological properties: it is a 2D topological insulator as a monolayer and a Weyl-semimetal and higher-order topological insulator in a bulk form. Inducing superconductivity in topological materials is a way to obtain topological superconductivity, which lays at the foundation for many proposals of fault tolerant quantum computing. Here, we demonstrate the emergence of superconductivity at the interface between WTe 2 and the normal metal palladium. The superconductivity has a critical temperature of about 1.2 K. By studying the superconductivity in a perpendicular magnetic field, we obtain the coherence length and the London penetration depth. These parameters correspond to a low Fermi velocity and a high density of states at the Fermi level. This hints to a possible origin of superconductivity due to the formation of flatbands. Furthermore, the critical in-plane magnetic field exceeds the Pauli limit, suggesting a non-trivial nature of the superconducting state.

Kononov, Artem↗
DOE OSTI2023

Exploring the $A$-V-Sb landscape beyond $A$$\mathrm{V_3}$ $\mathrm{Sb_5}$: A case study on the $\mathrm{KV_6}$ $\mathrm{Sb_6}$ Kagome compound

Kagome compounds have garnered attention in the past few years for their intriguing magnetic properties arising from spin frustration dictated by the geometry of the Kagome sublattice. In this paper, we highlight the success of the unconventional hydride route for the fast and easy synthesis of the Kagome compound $\mathrm{KV_6}$ $\mathrm{Sb_6}$. Here, high-temperature in situ powder x-ray diffraction (PXRD) studies proved to be useful in hinting at the existence of $\mathrm{KV_6}$ $\mathrm{Sb_6}$, identifying its synthesis conditions, and understanding the reaction mechanism. The crystal structure for $\mathrm{KV_6}$ $\mathrm{Sb_6}$ was determined from high-resolution PXRD data. The compound has a layered structure [$R\overline{3}m, a = 5.5318$ (9) Å, $c = 34.23$ (3)Å 3 $Z = 3$] at room temperature] and features a Kagome bilayer of V atoms. $\mathrm{KV_6}$ $\mathrm{Sb_6}$ is isostructural to the previously reported $\mathrm{RbV_6}$ $\mathrm{Sb_6}$ and $\mathrm{CsV_6}$ $\mathrm{Sb_6}$ compounds. $\mathrm{KV_6}$ $\mathrm{Sb_6}$ is thermally stable in vacuum up to 1173 K, as evident from the high-temperature in situ PXRD and differential scanning calorimetric analysis. Investigation of magnetic properties for $\mathrm{KV_6}$ $\mathrm{Sb_6}$ between 2 and 300 K reveals temperature-independent paramagnetism and an absence of superconductivity, like the Rb and Cs analogs. Furthermore, we compare the magnetic properties of K V 3 Sb 5 , another ternary Kagome compound, synthesized via two different methods: the hydride route and the traditional route from elements. Low-temperature transport property measurements of $\mathrm{KV_6}$ $\mathrm{Sb_6}$ indicate metallic behavior and an intrinsically low thermal conductivity of $\mathrm{1.0 W K^-1}$ $\mathrm{m^-1}$ at 300 K. The layered structure of $\mathrm{KV_6}$ $\mathrm{Sb_6}$ makes it an attractive candidate for deintercalation and doping studies to tune both magnetic and transport properties, laying a foundation for further studies.

36 MATERIALS SCIENCE↗