Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high performance computing systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

THz dichroic plates for use at high angles of incidence

The design of a high frequency dichroic plate consisting of an electrically thick self supporting metallic mesh that can be used in a linearly polarized quasi-optical system at high angles of incidence is described. The measured and computed performance of a 2.5-inch aperture mesh is given. This mesh has a 3-dB cutoff frequency of 875 GHz and less than 0.75 dB of transmission loss from 950-1350 GHz at incidence angles of 0, 30, and 45 degrees. The results of a multimode waveguide analysis corroborate the measured data.

Siegel, Peter H.↗

Development of software for the MSFC solar vector magnetograph

The Marshall Space Flight Center Solar Vector Magnetograph is a special purpose telescope used to measure the vector magnetic field in active areas on the surface of the sun. This instrument measures the linear and circular polarization intensities (the Stokes vectors Q, U and V) produced by the Zeeman effect on a specific spectral line due to the solar magnetic field from which the longitudinal and transverse components of the magnetic field may be determined. Beginning in 1990 as a Summer Faculty Fellow in project JOVE and continuing under NASA Grant NAG8-1042, the author has been developing computer software to perform these computations, first using a DEC MicroVAX system equipped with a high speed array processor, and more recently using a DEC AXP/OSF system. This summer's work is a continuation of this development.

Kineke, Jack↗

Optics Program Modified for Multithreaded Parallel Computing

A powerful high-performance computer program for simulating and analyzing adaptive and controlled optical systems has been developed by modifying the serial version of the Modeling and Analysis for Controlled Optical Systems (MACOS) program to impart capabilities for multithreaded parallel processing on computing systems ranging from supercomputers down to Symmetric Multiprocessing (SMP) personal computers. The modifications included the incorporation of OpenMP, a portable and widely supported application interface software, that can be used to explicitly add multithreaded parallelism to an application program under a shared-memory programming model. OpenMP was applied to parallelize ray-tracing calculations, one of the major computing components in MACOS. Multithreading is also used in the diffraction propagation of light in MACOS based on pthreads [POSIX Thread, (where "POSIX" signifies a portable operating system for UNIX)]. In tests of the parallelized version of MACOS, the speedup in ray-tracing calculations was found to be linear, or proportional to the number of processors, while the speedup in diffraction calculations ranged from 50 to 60 percent, depending on the type and number of processors. The parallelized version of MACOS is portable, and, to the user, its interface is basically the same as that of the original serial version of MACOS.

Lou, John↗

Harnessing the power of supercomputers using the PanDA Pilot 2 in the ATLAS Experiment

The unprecedented computing resource needs of the ATLAS experiment at LHC have motivated the Collaboration to become a leader in exploiting High Performance Computers (HPCs). To meet the requirements of HPCs, the PanDA system has been equipped with two new components; Pilot 2 and Harvester, that were designed with HPCs in mind. While Harvester is a resource-facing service which provides resource provisioning and workload shaping, Pilot 2 is responsible for payload execution on the resource. The presentation focuses on Pilot 2, which is a complete rewrite of the original PanDA Pilot used by ATLAS and other experiments for well over a decade. Pilot 2 has a flexible and adaptive design that allows for plugins to be defined with streamlined workflows. In particular, it has plugins for specific hardware infrastructures (HPC/GPU clusters) as well as for dedicated workflows defined by the needs of an experiment. Examples of dedicated HPC workflows are discussed in which the Pilot either uses an MPI application for processing fine-grained event level service under the control of the Harvester service or acts like an MPI application itself and runs a set of job in an assemble. In addition to describing the technical details of these workflows, results are shown from its deployment on Titan (OLCF) and other HPCs in ATLAS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transforming Energy Through Computational Excellence: A Virtual Test-Drive of Energy Scenarios

Researchers at the National Renewable Energy Laboratory (NREL) are conducting groundbreaking research to decarbonize transportation systems and reduce emissions. As they plan for growing populations and related demands on aging infrastructure and energy systems, local transportation departments and city planners are facing significant, complex challenges. New approaches to planning and operations, as well as capitalizing on rapidly advancing technology, can address mobility and energy-centric challenges, including cost and energy efficiency, emissions reduction, decarbonization, and congestion.

33 ADVANCED PROPULSION SYSTEMS↗

High-speed, automatic controller design considerations for integrating array processor, multi-microprocessor, and host computer system architectures

Modern control systems must typically perform real-time identification and control, as well as coordinate a host of other activities related to user interaction, online graphics, and file management. This paper discusses five global design considerations which are useful to integrate array processor, multimicroprocessor, and host computer system architectures into versatile, high-speed controllers. Such controllers are capable of very high control throughput, and can maintain constant interaction with the nonreal-time or user environment. As an application example, the architecture of a high-speed, closed-loop controller used to actively control helicopter vibration is briefly discussed. Although this system has been designed for use as the controller for real-time rotorcraft dynamics and control studies in a wind tunnel environment, the controller architecture can generally be applied to a wide range of automatic control applications.

Jacklin, S. A.↗

Virtual Observation System for Earth System Model: An Application to ACME Land Model Simulations

Investigating and evaluating physical-chemical-biological processes within an Earth system model (EMS) can be very challenging due to the complexity of both model design and software implementation. A virtual observation system (VOS) is presented to enable interactive observation of these processes during system simulation. Based on advance computing technologies, such as compiler-based software analysis, automatic code instrumentation, and high-performance data transport, the VOS provides run-time observation capability, in-situ data analytics for Earth system model simulation, model behavior adjustment opportunities through simulation steering. A VOS for a terrestrial land model simulation within the Accelerated Climate Modeling for Energy model is also presented to demonstrate the implementation details and system innovations.

58 GEOSCIENCES↗

Computational Design and Experimental Validation of New Thermal Barrier Systems

This project (10/01/2010-9/30/2013), “Computational Design and Experimental Validation of New Thermal Barrier Systems”, originates from Louisiana State University (LSU) Mechanical Engineering Department and Southern University (SU) Department of Computer Science. This proposal will directly support the technical goals specified in DE-FOA-0000248, Topic Area 3: Turbine Materials, by addressing key technologies needed to enable the development of advanced turbines and turbine-based systems that will operate safely and efficiently using coal-derived synthesis gases. We will develop novel molecular dynamics method to improve the efficiency of simulation on novel TBC materials; we will perform high performance computing (HPC) on complex TBC structures to screen the most promising TBC compositions; we will perform material characterizations and oxidation/corrosion tests; and we will demonstrate our new Thermal barrier coating (TBC) systems experimentally under Integrated gasification combined cycle (IGCC) environments. The durability of the coating will be examined using the proposed High Temperature/High Pressure Durability Test Rig under real syngas product compositions.

01 COAL, LIGNITE, AND PEAT↗

Water-Based Coating Simplifies Circuit Board Manufacturing

The Structures and Materials Division at Glenn Research Center is devoted to developing advanced, high-temperature materials and processes for future aerospace propulsion and power generation systems. The Polymers Branch falls under this division, and it is involved in the development of high-performance materials, including polymers for high-temperature polymer matrix composites; nanocomposites for both high- and low-temperature applications; durable aerogels; purification and functionalization of carbon nanotubes and their use in composites; computational modeling of materials and biological systems and processes; and developing polymer-derived molecular sensors. Essentially, this branch creates high-performance materials to reduce the weight and boost performance of components for space missions and aircraft engine components. Under the leadership of chemical engineer, Dr. Michael Meador, the Polymers Branch boasts world-class laboratories, composite manufacturing facilities, testing stations, and some of the best scientists in the field.

Source record↗

PIPER: Performance Insights for Programmers and Exascale Runtimes

During the lifetime of the project, the PIPER at the University of Utah worked in collaboration with the team from the partner institutions to establish a set of software tools for analyzing and improving the performance parallel computing tools. These activities complement and complete the work performed by the other X-Stack 2 projects with the definition of a common data models and computing infrastructures, which have been a central element in the targeted performance analysis pipeline and new programming models. The University of Utah team have focused mainly on developing data analysis and visualization systems to facilitate exploration, comparison and evaluation of the behavior and performance of complex algorithms in modern HPC infrastructures. This is involved several demonstrations of the performance achieved and presentation of the results in a way that facilitates the users understand bottlenecks and ways to overcome them. One major focus of the University of Utah activities has been the analysis of the performance characteristics of Fat-Tree and Dragonfly topology networks. The work involved the development of practical visualization systems especially in collaboration with the team at LLNL, and published several papers and gave invited talks at prestigious venues such as the Salishan Conference on High-Speed Computing or the International Conference on High Performance Computing, Data, and Analytics. In addition, the university of Utah team has advanced the core activities on analyzing the performance characteristics of I/O and other data movement systems and their practical use for scaling Uintah and other simulation codes poised for use in the exascale computing environments of the future.

42 ENGINEERING↗

Smart Sampling and HPC-based Probabilistic Look-ahead Contingency Analysis Implementation and its Evaluation with Real-world Data

This paper describes a probabilistic look-ahead contingency analysis application that incorporates smart sampling and high-performance computing (HPC) techniques. Smart sampling techniques are implemented to effectively represent the structure and statistical characteristics of uncertainty introduced by different sources in the power system. They can significantly reduce the data set size required for multiple look-ahead contingency analyses, and therefore reduce the time required to compute them. High-performance-computing (HPC) techniques are used to further reduce computational time. These two techniques enable a predictive capability that forecasts the impact of various uncertainties on potential transmission limit violations. The developed package has been tested with real world data from the Bonneville Power Administration. Case study results are presented to demonstrate the performance of the applications developed.

high performance computing↗

High Resolution Nature Runs and the Big Data Challenge

NASA's Global Modeling and Assimilation Office at Goddard Space Flight Center is undertaking a series of very computationally intensive Nature Runs and a downscaled reanalysis. The nature runs use the GEOS-5 as an Atmospheric General Circulation Model (AGCM) while the reanalysis uses the GEOS-5 in Data Assimilation mode. This paper will present computational challenges from three runs, two of which are AGCM and one is downscaled reanalysis using the full DAS. The nature runs will be completed at two surface grid resolutions, 7 and 3 kilometers and 72 vertical levels. The 7 km run spanned 2 years (2005-2006) and produced 4 PB of data while the 3 km run will span one year and generate 4 BP of data. The downscaled reanalysis (MERRA-II Modern-Era Reanalysis for Research and Applications) will cover 15 years and generate 1 PB of data. Our efforts to address the big data challenges of climate science, we are moving toward a notion of Climate Analytics-as-a-Service (CAaaS), a specialization of the concept of business process-as-a-service that is an evolving extension of IaaS, PaaS, and SaaS enabled by cloud computing. In this presentation, we will describe two projects that demonstrate this shift. MERRA Analytic Services (MERRA/AS) is an example of cloud-enabled CAaaS. MERRA/AS enables MapReduce analytics over MERRA reanalysis data collection by bringing together the high-performance computing, scalable data management, and a domain-specific climate data services API. NASA's High-Performance Science Cloud (HPSC) is an example of the type of compute-storage fabric required to support CAaaS. The HPSC comprises a high speed Infinib and network, high performance file systems and object storage, and a virtual system environments specific for data intensive, science applications. These technologies are providing a new tier in the data and analytic services stack that helps connect earthbound, enterprise-level data and computational resources to new customers and new mobility-driven applications and modes of work. In our experience, CAaaS lowers the barriers and risk to organizational change, fosters innovation and experimentation, and provides the agility required to meet our customers' increasing and changing needs

big data analysis↗

Special Topic on High Performance Computing in Chemical Physics

Computational modeling and simulation have become indispensable scientific tools in virtually all areas of chemical, biomolecular, and materials systems research. Computation can provide unique and detailed atomic level information that is difficult or impossible to obtain through analytical theories and experimental investigations. In addition, recent advances in micro-electronics have resulted in computer architectures with unprecedented computational capabilities, from the largest supercomputers to common desktop computers. In conclusion, combined with the development of new computational domain science methodologies and novel programming models and techniques, this has resulted in modeling and simulation resources capable of providing results at or better than experimental chemical accuracy and for systems in increasingly realistic chemical environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MFIX-DEM Phi: Performance and Capability Improvements Towards Industrial Grade Open-source DEM Framework with Integrated Uncertainty Quantification

Two major challenges hinder the effective use and adoption of multiphase computational fluid dynamics tools by the industry. The first is the need for significant computational resources, which is inversely proportional to the accuracy of solutions due to computational intensity of the algorithms. The second barrier is assessing the prediction credibility and confidence in the simulation results. In this project, a multi-tiered approach has been proposed under four broad activities to overcome these challenges while addressing all of the objectives outlined in FOA-0001238 through Phases 1 and 2 of the project. The present report consists of the results for only Phase 1, which was the funded performance period. From the start the project, all of the objectives outlined in FOA were addressed through four major activity tasks in an integrated and balanced fashion to improve adoption of MFIX suite of solvers for industrial use. The first task aimed to improve the performance of MFIX-DEM specifically targeting to acquire the peak performance on Intel Xeon and Xeon Phi based systems, which are expected to be one of the primary high-performance computing platforms both affordable and available for the industrial users in the next two to five years. However, due to a number of changes in course of the project, the scope of the performance improvements related task was significantly reduced to avoid duplicate work. Hence, more emphasis was placed on the other three tasks as discussed below. The second task aimed at physical modeling enhancements through implementation of polydispersity capability and validation of heat transfer models in MFIX. An extended verification and validation (V&V) study was performed for the new polydispersity feature implemented in MFIX-DEM both for granular and coupled gas-solid flows. The features of the polydispersity capability and results for an industrially relevant problem were disseminated through journal papers (one published and one under review at the time of writing of the final technical report). As part of the validation efforts, another industrially relevant problem of interest based on rotary drums was studied for several modes of heat transfer and results were presented in conferences. Third task was aimed towards an important and unique contribution of the project, which was to develop a unified uncertainty quantification framework by integrating MFIX-DEM with a graphical user interface (GUI) driven uncertainty quantification (UQ) engine, i.e., MFIX-GUI and PSUADE. The goal was to enable a user with only modest knowledge of statistics to effectively utilize the UQ framework offered with MFIX-DEM Phi to perform UQ analysis routinely. For Phase 1, a proof-of-concept demonstration of the proposed framework was completed and shared. Direct industry involvement was one of the key virtues of this project, which was performed through forth task. For this purpose, even at the proposal stage, the project team received strong interest in the proposed capabilities from two major corporations, which were further expanded throughout Phase 1 and a new collaboration with another major corporation from chemical industry was also initiated. The level of interest received and continued collaboration for the project during Phase 1 clearly shows the relevance and potential impact of the project for the industrial users.

42 ENGINEERING↗

Evaluating Performance, Power, and Cooling in High Performance Computing (HPC) Data Centers

This chapter explores current research focused on developing our understanding of the interrelationships involved with HPC performance and energy management. The first section explores data center instrumentation, measurement, and performance analysis techniques, followed by a section focusing on work in data center thermal management and resource allocation. This is followed by an exploration of emerging techniques to identify application behavioral attributes that can provide clues and advice to HPC resource and energy management systems for the purpose of balancing HPC performance and energy efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A 1kV, 480V Power Electronics Hub for DER Integration in Commercial Buildings

Power electronic (PE) systems are increasingly being integrated into distribution and sub-distribution networks in support of distributed energy resource integration (DERs), electric vehicle (EV) charging (particularly in the case of fast charging infrastructure), and improvement in power quality for high performance computing and/or servers farms. This provides an opportunity to research and develop integrated PE systems that can function as single systems thereby bringing additional functionality and benefits to the overall system. The goal of this paper is to demonstrate foundational technologies and capabilities for a multiport power electronics energy hub that can intelligently coordinate and control integrated sources and loads. The focus for this digest is on a commercial building use case which is demonstrated in hardware.

Starke, Michael↗

Online Anomaly Detection Using Machine Learning and HPC for Power System Synchrophasor Measurements

This paper presents an online early anomaly detection framework for phasor measurement units (PMUs) to monitor the power system dynamics and help prevent blackouts using machine learning approaches. Dynamical machine learning solutions including state space model and Kalman filter are conducted in this study to learn the nonlinear and nonstationary PMU measurements and accurately predict system behaviors in real-time. The anomalies can be detected within seconds by comparing the predicted system behaviors with the real system observations. The method proposed in this framework trains PMU data with a given time window (e.g., 5 seconds) using a dynamic nonlinear model, and then predicts system behaviors during the following time window. High prediction accuracy is achieved by applying the dynamic nonlinear model to the real-world PMU measurements – the anomalies detected are successfully validated given the recorded real-world events. High-performance-computing (HPC) techniques are utilized to further reduce computational time to provide real time power system situational awareness.

Ren, Huiying↗

LaRIS: Targeting Portability and Productivity for LAPACK Codes on Extreme Heterogeneous Systems by Using IRIS

In keeping with the trend of heterogeneity in high-performance computing, hardware manufacturers and vendors are developing new architectures and associated software stacks (e.g., libraries) to harness the best possible performance from commonly used kernels (e.g., linear algebra kernels). However, kernels tuned for one architecture are not portable to others. Moreover, the coexistence of different architectures in a single node makes orchestration difficult. To address these challenges, we introduce LaRIS, a portable framework for LAPACK functionalities. LaRIS ensures a separation between linear algebra algorithms and vendor-library kernels by using the IRIS run time and IRIS-BLAS library. Such abstraction at the algorithm level makes the implementation completely agnostic to the vendor library and architecture. LaRIS uses the IRIS run time to dynamically select the vendor-library kernel and suitable processor architecture at run time. Through LU factorization, we demonstrate that LaRIS can fully utilize different heterogeneous systems by launching and orchestrating different vendor-library kernels without any change in the source code.

Monil, M. A. H.↗