Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “halide perovskite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Blading Phase–Pure Formamidinium–Alloyed Perovskites for High–Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Currently, blade-coated perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs), i.e. greater than 20%, normally employ methylammonium lead tri-iodide with a sub-optimal bandgap. Alloyed perovskites with formamidinium (FA) cation have narrower bandgap and thus enhance device photocurrent. However, FA-alloyed perovskites show low phase stability and high moisture sensitivity. Here, we report that incorporating 0.83 molar percent organic halide salts (OHs) into the perovskite inks enables phase-pure, highly crystalline FA-alloyed perovskites with extraordinary optoelectronic properties. Here, the OH molecules modulate the crystal growth, enhance the phase stability, passivate ionic defects at the surface and/or grain boundaries, and enhance the moisture stability of the perovskite film. We demonstrate a high efficiency of 22.0% under 1 sun illumination for blade-coated PSCs with an open-circuit voltage of 1.18 V, corresponding to a very small voltage deficit of 0.33 V, and significantly improved operational stability with 96% of the initial efficiency retained under one sun illumination for 500 hours.

14 SOLAR ENERGY↗
DOE OSTI2026

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Low-dimensional organic–inorganic metal halide hybrids (OMHHs) exhibit remarkable optical properties and enhanced environmental stability. We investigate a 1D OMHH with formula C 4 N 2 H 14 PbBr 4 , consisting of Pb–Br chains separated by organic cations, which shows a large Stokes shift (0.83 eV) and broadband emission. Through first-principles calculations and polarized Raman spectroscopy, we characterize the material's vibrational properties and identify the specific phonon modes that drive exciton self-trapping. Our novel GW/Bethe-Salpeter equation force formalism reveals that low-frequency phonons (∼ 100 cm −1 , primarily involving Pb–Br motions) couple strongly with excitons, with a remarkably high Huang-Rhys factor of 137 ± 4, and gives a pathway for ultrafast structural analysis during the absorption process. This phonon-exciton coupling mechanism explains the material's broadband emission and provides a pathway for controlling optical properties through vibrations and for tuning vibrations through optical excitations. The material also exhibits highly anisotropic optical properties and electronic transport, with bands that are dispersive along the Pb–Br chains but nearly flat in perpendicular directions, resulting in direction-dependent electrical conductivity that is calculated to be an order of magnitude higher along the chain direction and consistent with measurements. These combined properties make this system an excellent platform for polarization-sensitive optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable exciton binding energy in 2D hybrid layered perovskites through donor–acceptor interactions within the organic layer

The strength of electrostatic interactions within semiconductors strongly affects their performance in optoelectronic devices. An important target is the tuning of a material’s exciton binding energy—the energy binding an electron–hole pair through the electrostatic Coulomb force—independent of its electronic band gap. Here, we report on the doping of a family of two-dimensional hybrid perovskites, in which inorganic lead halide sheets alternate with naphthalene-based organic layers, with tetrachloro-1,2-benzoquinone (TCBQ). For four out of seven n = 1 perovskites, the incorporation of the electron-accepting TCBQ dopant into the organic sublattice containing the electron-donating naphthalene species enabled the tuning of the materials’ 1s exciton binding energy. The naphthalene–TCBQ electron donor–acceptor interactions increased the electrostatic screening of the exciton, in turn lowering its binding energy relative to the undoped perovskite—by almost 50% in one system. Structural and optical characterization showed that the inorganic lattice is not significantly perturbed even though the layer-to-layer spacing increases upon molecular dopant incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhanced charge carrier lifetime and mobility as a result of Rb and Cs incorporation in hybrid perovskite

Alkali addition in organic–inorganic perovskite has become the standard recipe for achieving solar cells with efficiencies exceeding 20%, but the mechanism is not well understood. We use non-contact carrier lifetime measurements, mobility measurements, and synchrotron-based x-ray characterization techniques to show that there is a unique benefit to adding hybrid perovskite samples with Rb and Cs simultaneously. When either Rb or Cs is added, charge carrier mobility increases with alkali concentration. Charge carrier lifetime benefits from alkali incorporation as well, but is optimized with only moderate concentration at 1%. When both Rb and Cs are introduced, however, the high mobility is maintained and the charge carrier lifetime increases considerably. Our results show that when incorporated alone, Rb and Cs have very similar roles in a perovskite crystal, but when co-added, halide distribution becomes homogenized correlating with improved charge transport properties.

Erodici, Matthew P.↗
DOE OSTI2023

Incorporating Potassium Citrate to Improve the Performance of Tin‐Lead Perovskite Solar Cells

Abstract Easy‐to‐form tin vacancies at the buried interface of tin‐lead perovskites hinder the performance of low‐bandgap perovskite solar cells (PSCs). Here, a synergistic strategy by incorporating potassium citrate (PC) into the poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hole‐transport layer to passivate the buried interface of Sn‐Pb PSCs is reported. PC neutralizes the acidity of PEDOT:PSS and stabilizes the perovskite front surface, enhancing device stability. Citrate moieties coordinate with Sn 2+ on the buried perovskite surface, preventing Sn 2+ oxidation and suppressing defect formation. Additionally, potassium cations incorporate into Sn‐Pb perovskites, enhancing crystallinity and passivating halide defects. The combined benefits enable efficient low‐bandgap Sn‐Pb PSCs with a power conversion efficiency of 22.7% and a high open‐circuit voltage of 0.894 V. Using this method, 26.1% efficiency for all‐perovskite tandem solar cells is demonstrated. These results emphasize the significance of buried interface passivation in developing efficient and stable Sn‐Pb PSCs and all‐perovskite tandem solar cells.

14 SOLAR ENERGY↗
DOE OSTI2024

Structural and physical properties of two distinct 2D lead halides with intercalated Cu( II )

Transition metal cation intercalation between the layers of two-dimensional (2D) metal halides is an underexplored research area. In this work we focus on the synthesis and physical property characterizations of two layered hybrid lead halides: a new compound [Cu(O 2 C–CH 2 –NH 2 ) 2 ]Pb 2 Br 4 and the previously reported [Cu(O 2 C–(CH 2 ) 3 –NH 3 ) 2 ]PbBr 4 . These compounds exhibit 2D layered crystal structures with incorporated Cu 2+ between the metal halide layers, which is achieved by combining Cu(II) and lead bromide with suitable amino acid precursors. The resultant [Cu(O 2 C–(CH 2 ) 3 –NH 3 ) 2 ]PbBr 4 adopts a 2D layered perovskite structure, whereas the new compound [Cu(O 2 C–CH 2 –NH 2 ) 2 ]Pb 2 Br 4 crystallizes with a new structure type based on edge-sharing dodecahedral PbBr5O3 building blocks. [Cu(O 2 C–CH 2 –NH 2 ) 2 ]Pb 2 Br 4 is a semiconductor with a bandgap of 3.25 eV. It shows anisotropic charge transport properties with a semiconductor resistivity of 1.44 × 10 10 Ω cm (measured along the a-axis) and 2.17 × 10 10 Ω cm (along the bc-plane), respectively. The fabricated prototype detector based on this material showed response to soft low-energy X-rays at 8 keV with a detector sensitivity of 1462.7 μCGy –1 cm –2 , indicating its potential application for ionizing radiation detection. Finally, these encouraging results are discussed together with the results from density functional theory calculations, optical, magnetic, and thermal property characterization experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

(NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a Vacancy-Ordered Three-Dimensional Tin(II) Perovskite-Derived Semiconductor

Ordering vacancies in hybrid Sn(II) halide semiconductors provides a strategy for preventing uncontrolled oxidation and formation of mobile holes. In this study, we report the structure and optical and electronic properties of (NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a vacancy-ordered perovskite derivative with three-dimensional inorganic connectivity. The crystal structure resembles that of a Dion–Jacobson layered perovskite derivative, but with [SnI 5 ] square pyramids bridging the layers. UV–vis diffuse reflectance spectroscopy reveals a sharp onset of light absorption at 1.86(1) eV with the photoluminescence emission maximum at 1.90(1) eV. However, the maximum excitation occurs from 3.42 to 3.81 eV (325 to 370 nm), revealing a significant Stokes shift of 1.3 eV. The electronic properties determined from dark and time-resolved microwave conductivity measurements reveal a minimum carrier mobility of 4.3 × 10 –2 cm 2 V –1 s –1 and a maximum carrier density of 5.96 × 10 16 cm –3 , a uniquely low value for a hybrid Sn(II) halide semiconductor. The transport behavior in combination with first-principles calculations of the electronic band structure and dielectric permittivity suggest polaron-mediated electronic transport, yet the photogenerated carriers have a fast and fluence-dependent nonradiative recombination rate, suggestive of localized “defect-like” states at the band edge. The observed photoluminescence is most consistent with single-ion-like behavior of an asymmetric Sn(II) environment. Together, these results suggest that defect ordering presents a strategy for the reduction of mobile charge carriers at equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structure, Morphology, and Photovoltaic Implications of Halide Alloying in Lead-Free Cs 3 Sb 2 Cl x I 9-x 2D-Layered Perovskites

Compositional tuning has been a major driving force behind the excellent optoelectronic properties observed in typical Pb-based perovskites. For lead-free perovskite derivatives, a challenge to understanding the connection between compositional tuning and intrinsic optoelectronic properties, hence a barrier towards boosting their performance, comes from the fact that multiple crystalline substructures can form based on composition, film processing, or both. Especially with lower dimensional (0D, 1D, 2D) substructures, the particular polymorph present in the film can be a greater determinant of optoelectronic properties than the composition itself. Herein, we report a simple method to alloy the halide site in all-inorganic lead-free Cs 3 Sb 2 I 9 films while maintaining a consistent 2D-layered substructure, as a means to independently study the photovoltaic implications of halide substitution. We use a broad suite of spectroscopy and device measurements to identify an optimal stoichiometric substitution of chloride for iodide (~ 8 mol%, measured) that balances both intrinsic and bulk optoelectronic properties to achieve a top power conversion efficiency of 2.2%. This work underscores the importance of controlling substructure while investigating the impacts of compositional tuning for the development of lead-free perovskites, and more broadly validates the approach towards realizing lead-free alternative perovskite solar technologies.

14 SOLAR ENERGY↗
DOE OSTI2023

Thermodynamic controls on the synthesis, structure and reactivity of materials for energy (Final Report)

The major objectives have been: a) to advance and use unique calorimetric capabilities to determine the energetics of oxide and other materials having possible energy applications, with an emphasis on new materials for batteries, fuel cells and solar energy conversion, b) to understand, in terms of both macroscopic energetics and microscopic structure and bonding, the interplay of defect chemistry, oxidation-reduction, and size effects at the bulk and nanoscale in determining materials properties. This project emphasizes mixed ionic-electronic conduction materials containing transition metals of variable valence, especially perovskites and lithium containing phases, with M = Mn, Fe, Co, Ni. The thermochemistry of new families of complex halide, chalcogenide, nitride and hybrid (organic-inorganic) perovskite materials were explored. The major and unique technique employed is high temperature oxide melt solution calorimetry, with careful attention given to materials synthesis and characterization. The thermochemical studies will be coupled with structural studies, especially to characterize order-disorder phenomena by in situ high temperature diffraction techniques.

14 SOLAR ENERGY↗
DOE OSTI2021

Synthesis of LaWN 3 nitride perovskite with polar symmetry

Perovskite structured materials have a variety of uses as photovoltaics, capacitors, and micromechanical actuators, along with other applications. Oxides, halides, and chalcogenides all have large numbers of perovskite structured materials. Examples of perovskite nitrides are conspicuously absent, but Talley et al managed to synthesize one (see the Perspective by Hong). Lanthanum tungsten nitride in the perovskite structure turns out to be piezoelectric, which is ideal for a variety of applications. Perovskite structured nitrides are very attractive because they could easily integrate with the large number of nitride-based semiconducting devices already in use.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Improving Photostability of Cesium-Doped Formamidinium Lead Triiodide Perovskite

Using time-resolved in situ X-ray photoelectron spectroscopy, we identify and suppress rapid degradation mechanisms for cesium-stabilized formamidinium lead iodide perovskite materials used in state-of-the-art photovoltaics. Accelerated degradation under high light intensity and heating reveals a photocatalytic reaction pathway responsible for rapid decomposition in iodide-rich compositions and a slower pathway for more stoichiometric samples. Using Avrami–Erofe’ev kinetic analysis, we find that the fast process is consistent with a 2D crystallization and growth mechanism fueled by excess halide salt at grain boundaries and surfaces. Moreover, the rate of decomposition varies dramatically with the wavelength of light used to illuminate the thin films. Furthermore, our results reveal the photodegradation mechanisms of PbI 2 and excess iodide and provide a path to increasing perovskite stability under photoexcitation.

14 SOLAR ENERGY↗
DOE OSTI2026

Enhancing dimensionality prediction in hybrid metal halides via feature engineering and class-imbalance mitigation

We present a machine learning (ML) framework for predicting the structural dimensionality of hybrid metal halides (HMHs), including organic-inorganic perovskites, using a combination of chemically-informed feature engineering and advanced class-imbalance handling techniques. This study is motivated by the small and highly imbalanced nature of experimentally available HMH datasets, which limits the applicability and reliability of conventional ML approaches. The dataset, consisting of 494 HMH structures, is highly imbalanced across dimensionality classes (0D, 1D, 2D, 3D), posing significant challenges to predictive modeling. To mitigate this limitation, the dataset was augmented to 1336 samples using the synthetic minority oversampling technique, enabling improved learning of underrepresented dimensionality classes while preserving chemically meaningful feature relationships. We developed interaction-based descriptors designed to capture coupled steric and polarity effects relevant to dimensionality prediction, which are not readily captured by standard single-parameter or composition-only descriptors. These descriptors are integrated into a multi-stage workflow combining feature selection, ensemble stacking, and performance optimization. Our approach significantly improves F1-scores for underrepresented classes, achieving robust cross-validation performance across all dimensionalities. This work demonstrates a generalizable strategy for extracting reliable and interpretable structure–dimensionality relationships from limited experimental data, enabling pre-synthesis screening of organic cations and providing a practical blueprint for small-data ML in hybrid materials systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Luminescent group 1A copper halides and uses thereof

High photoluminescence, high stability, inorganic perovskite compounds comprising an alkali metal selected from potassium (K), rubidium (Rb), and cesium (Cs); copper (Cu); and at least one halogen selected from chlorine (Cl), bromine (Br), and iodine (I). The perovskites may be free of lead (Pb). The inorganic perovskite compound may be used in an optoelectronic device. The optoelectronic device optionally contains a phosphor such as a blue-emitting phosphor. The inorganic perovskite compound may be used as an anti-counterfeiting nanotaggant applied on or within an object that susceptible to counterfeiting to enable confirmation of an authentic object.

Saparov, Bayram↗
DOE OSTI2021

Perovskite Solar Cells Go Bifacial—Mutual Benefits for Efficiency and Durability

Bifacial solar cells hold the potential to achieve a higher power output per unit area than conventional monofacial devices without significantly increasing manufacturing costs. However, efficient bifacial designs are challenging to implement in inorganic thin-film solar cells because of their short carrier lifetimes and high rear surface recombination. The emergence of perovskite photovoltaic (PV) technology creates a golden opportunity to realize efficient bifacial thin-film solar cells, owing to their outstanding optoelectronic properties and unique features of device physics. More importantly, transparent conducting oxide electrodes can prevent electrode corrosion by halide ions, mitigating one major instability issue of the perovskite devices. Here, the theory of bifacial PV devices is summarized and the advantages of bifacial perovskite solar cells, such as high power output, enhanced device durability, and low economic and environmental costs, are reviewed. The limitations and challenges for bifacial perovskite solar cells are also discussed. Lastly, the awareness of bifacial solar cells as a feasible commercialization pathway of perovskite PV for mainstream solar power generation and building-integrated PV is advocated and future research directions are suggested.

14 SOLAR ENERGY↗
DOE OSTI2023

Novel 3D Cubic Topology in Hybrid Lead Halides with a Symmetric Aromatic Triammonium Exhibiting Water Stability

The limitations of three-dimensional (3D) perovskites are related to their narrow structural tunability of the organic cations and their moisture sensitivity. Herein, we report a new family of 3D cubic hybrid metal halides (T-Et 6 ) 3 Pb 11 X 31 (X = I, Br), where T is 1,3,5-tris-(4-aminophenyl)benzene. The materials are synthesized through an in situ N-alkylation of T and an efficient one-step solvothermal reaction containing ethanol, initiating a tunable synthetic avenue for the acquisition of structurally complex hybrid halides with luminophores. (T-Et 6 ) 3 Pb 11 X 31 consist of an unprecedented Ia3̅ framework of [Pb 11 X 31 ] 9– one-dimensional (1D) chains embedded with (T-Et 6 ) 3+ cations, affording an overall 3D topology. Here, the constituent [Pb 11 X 31 ] 9– chains include exclusively octahedral lead halide units with clusters of face- and edge-sharing connectivity, giving rise to weak broad emission centered at ~660 nm observed at 78 K. (T-Et 6 ) 3 Pb 11 I 31 demonstrates water stability for at least 7 days. Synthesis through ambient pressure results in tunable structural variations of zero-dimensional (0D) structures rendering T 7 Pb 3 Br 27 ·DMF and T 2 Sn 3 Br 18 ·4H 2 O·0.5Br 2 , both of which feature blue PL emission at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Redox Chemistry of the Subphases of α-CsPbI2Br and β-CsPbI2Br: Theory Reveals New Potential for Photostability

The logic in the design of a halide-mixed APb(I 1-x Br x ) 3 perovskite is quite straightforward: to combine the superior photovoltaic qualities of iodine-based perovskites with the increased stability of bromine-based perovskites. However, even small amounts of Br doped into the iodine-based materials leads to some instability. In the present report, using first-principles computations, we analyzed a wide variety of α-CsPbI 2 Br and β-CsPbI 2 Br phases, compared their mixing enthalpies, explored their oxidative properties, and calculated their hole-coupled and hole-free charged Frenkel defect (CFD) formations by considering all possible channels of oxidation. Nanoinclusions of bromine-rich phases in α-CsPbI 2 Br were shown to destabilize the material by inducing lattice strain, making it more susceptible to oxidation. The uniformly mixed phase of α-CsPbI 2 Br was shown to be highly susceptible towards a phase transformation into β-CsPbI 2 Br when halide interstitial or halide vacancy defects were introduced into the lattice. The rotation of PbI 4 Br 2 octahedra in α-CsPbI2Br allows it either to transform into a highly unstable apical β-CsPbI 2 Br, which may phase-segregate and is susceptible to CFD, or to phase-transform into equatorial β-CsPbI 2 Br, which is resilient against the deleterious effects of hole oxidation (energies of oxidation >0 eV) and demixing (energy of mixing <0 eV). Thus, the selective preparation of equatorial β-CsPbI 2 Br offers an opportunity to obtain a mixed perovskite material with enhanced photostability and an intermediate bandgap between its constituent perovskites.

36 MATERIALS SCIENCE↗