Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “factorization methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A design method for minimizing sensitivity to plant parameter variations

A method is described for minimizing the sensitivity of multivariable systems to parameter variations. The variable parameters are considered as random variables and their effect is included in a quadratic performance index. The performance index is a weighted sum of the state and control covariances that stem from both the random system disturbances and the parameter uncertainties. The numerical solution of the problem is described and application of the method to several initially sensitive tracking systems is discussed. The sensitivity factor of reduction was typically 2 or 3 over a system based on random system noise only, and yet resulted in state RMS increases of only about a factor of two.

Hadass, Z.↗
NASA NTRS1974

X-ray structural study of chrome-aluminum lunar spinel from the Sea of Fertility

An X-ray structural study was made of a lunar spinel sample from the Sea of Fertility. The chemical composition and distribution of cations in the structure were characterized. Interpretation of the experimental data by the least squares method yielded the oxygen parameter u = 0.261 and the isotropic temperature factor 1.09 AU squared.

Nozik, Y. Z.↗
NASA NTRS1975

Cold-air investigation of a 3 1/2-stage fan-drive turbine with a stage loading factor of 4 designed for an integral lift engine. 1: Turbine design and performance of first stage

The design of the 3 1/2-stage turbine is described, and the cold-air performance of the first stage, modified for axial inlet conditions, is presented. The performance of the modified single-stage turbine and of two comtemporary high-stage-loading-factor turbines is compared with that estimated with a reference prediction method.

Whitney, W. J.↗
NASA NTRS1974

Human vs autonomous control of planetary roving vehicles

Supervisory or semiautonomous control has some compelling advantages over step-by-step human command and verification for the operation of roving vehicles on remote planetary surfaces. There are also disadvantages in relation to the complex system that must be mobilized and the chain of events that must be enacted to conduct a mission. Which of the two control methods is better on technical grounds may not be the deciding factor in its acceptance or rejection. Some of the issues that affect changes in spacecraft design and operation are summarized. To accelerate the movement toward more autonomous machines, it will be necessary to understand and to address the problems that such autonomy will create for other elements of the control system and for the control process.

Whitney, W. M.↗
NASA NTRS1975

Orbital lifetime capabilities of digital programs RMDAP and Monster

The orbital lifetime study capabilities of the Reference Mission Design and Analysis Program (RMDAP) and the Apollo Mission Planning and Real-Time Rendezvous Support Program (ARRS or Monster) were studied. Output and program versatility, that is, the methods with which each program permits user definition of the major factors affecting orbital lifetimes, are discussed. In addition, orbit maintenance is examined and sample runs are compared. Since each program has special capabilities in different areas, it is left to the investigator's discretion as to the preferable program to employ for his lifetime study purposes.

Source record↗
NASA NTRS1975

An analytical and experimental stress analysis of a practical mode II fracture-test specimen

A boundary collocation method has been employed to determine the Mode II stress intensity factors for a pair of through-the-thickness edge cracks in a finite isotropic plate. An elastostatic analysis has been carried out in terms of the complete Williams stress function employing both even and odd components. The results of the numerical analysis were verified by a two-step procedure whereby the symmetric and antisymmetric portions of the solution were independently compared with existing solutions. The complete solution was verified by comparison with a photoelastic analysis. A compact shear specimen (CSS) of Hysol epoxy resin was loaded in a photoelastic experiment designed to study the isochromatic fringe patterns resulting from the Mode II crack tip stress distribution. The experiment verified that a pure Mode II stress distribution existed in the neighborhood of the crack tips and confirmed the accuracy of the boundary collocation solution for the Mode II stress intensity factors.

Chisholm, D. B.↗
NASA NTRS1976

Mode 1 stress intensity factors for round compact specimens

The mode 1 stress intensity factors were computed for round compact specimens by the boundary collocation method. Results are presented for ratios A sub T/R sub 0 in the range 0.3 to 0.8, where A sub t is the distance from the specimen center to the crack tip for a specimen of diameter 2R sub 0.

Gross, B.↗
NASA NTRS1977

Photometry of satellite surfaces

A review is presented of basic photometric concepts as they apply to the study of the surfaces of natural satellites. The analysis of brightness variations related to changes in solar phase angle, the longitude of the satellite in its orbit about the primary, and other factors is discussed, together with the derivation of phase integrals. The method used to determine geometric albedos is outlined, and major uncertainties in determined values are considered. Photometric results obtained for satellites of Mars and Jupiter are summarized. Leading side/trailing side brightness trends characteristic of the inner satellites of these planets and lightcurve color amplitude trends are examined. Priority areas for future photometric studies are identified.

Veverka, J.↗
NASA NTRS1977

Mode I stress intensity factors for round compact specimens

Mode I stress intensity factors were computed for round compact specimens by the boundary collocation method. Results are presented for ratios At/R0 in the range 0.3 to 0.8, where At is the distance from the specimen center to the crack tip for a specimen of diameter 2R0.

Gross, B.↗
NASA NTRS1979

Choice of method for discretization of continuous systems

The paper discusses and compares several common methods of discretizing the transfer function of a continuous control system so that a digital computer can be used. The discretization effect on the frequency response attenuation of the simple transfer function G(s) = 1/(s + 1) is illustrated for the Tusting, Boxer-Thaler, Madwed, linear segment approximation, and stair-step with half period advanced methods. The input frequency must be significantly lower than one-half the sampling error to have negligible discretization error. Phase differences due to discretization are also plotted, and it is seen that the zero-order hold contributes much more phase shift than that due to discretization. In situations where zero-order hold must follow a computer, the method of discretization of a continuous system is not a major factor if phase shift is important.

Mcvey, E. S.↗
NASA NTRS1982

Sensitivity of constrained linear inversions to the selection of the Lagrange multiplier

The influence of the choice of the Lagrange multiplier on constrained linear inversions is explored, with reference made to applications in inferring the columnar aerosol size distributions from spectral aerosol optical depth measurements. A range of the Lagrange multiplier is examined to find all positive solutions for the solution vector, which represents modifying factors to the assumed form of the size distribution. An iterative method is devised to constrain the calculations to consideration of only positive quantities and a requirement that the regression fit to data be consistent with measurement errors. The determination of the variances and covariances is formulated and applied to existing data sets for optical depth. Variances in the solution are found to be large for particle radii when the information content of the data is small.

King, M. D.↗
NASA NTRS1982

Ground Truth Sampling and LANDSAT Accuracy Assessment

It is noted that the key factor in any accuracy assessment of remote sensing data is the method used for determining the ground truth, independent of the remote sensing data itself. The sampling and accuracy procedures developed for nuclear power plant siting study are described. The purpose of the sampling procedure was to provide data for developing supervised classifications for two study sites and for assessing the accuracy of that and the other procedures used. The purpose of the accuracy assessment was to allow the comparison of the cost and accuracy of various classification procedures as applied to various data types.

Robinson, J. W.↗
NASA NTRS1983

A multi-grid method for the computation of viscid/inviscid interactions on airfoils

An improved version of the 'GRUMFOIL' code has been developed for the computation of airfoil flows. The method employs a conservative difference scheme for the potential equation, integral methods for the boundary layer, and viscous coupling conditions that fully account for the wake and strong interaction effects at trailing edges. The improved version uses Jameson's 'MAD' scheme to accelerate convergence of the inviscid solution, an improved 2nd order artificial viscosity and far field 'TARE' correction to reduce spatial truncation errors and Carter's semi-inverse method for the viscous solution. Results are presented which demonstrate a factor of ten reduction in computing cost.

Melnik, R. E.↗
NASA NTRS1985

The design and development of a constant-speed solar array drive

The design and development of a constant-speed solar array drive system for use in high power communications satellites is described. The relationship between continuity of motion in the solar array drive and spacecraft attitude disturbance is investigated. The selection of the system design based on the design requirements including spacecraft disturbance is discussed. The system comprises two main parts: the drive mechanism including small angle stepper motor and reduction gearing and the control electronics including ministepping drive circuits, such that a very small output step size is achieved. Factors contributing to discontinuities in motion are identified and discussed. Test methods for measurement of very small amplitudes of discontinuity at low rotational rates are described to assist in the testing of similar mechanisms.

Jones, H. M.↗
NASA NTRS1984

Preparing for the unexpected - A psychologist's case for improved training

In the procedures designed to minimize human errors that lead to aircraft incidents, the improved human factor engineering and automation approaches must be supplemented by new training methods. Changes are suggested in the preprogrammed training principles which are currently based almost exclusively on the procedures-oriented environment, with insufficient training for cognitive processing and awareness. Use of the Line-Oriented Flight Training procedure, in which a training simulator is supplemented by a highly structured script or scenario to simulate the total line operational environment for the purpose of simultaneously training the entire flight crew, offers one way of providing pilots and other crewmembers with the experience of dealing with unexpected or stressful events. Of primary importance is maximal coordination between the aircraft captain and other crewmembers during the flight, which puts emphasis on the importance of teamwork and personal relations among all other crewmembers. The current FARs governing training and proficiency will have to be modified to accommodate new training appoaches.

Foushee, H. C.↗
NASA NTRS1988

A general formalism for phase space calculations

General formulas for calculating the interactions of galactic cosmic rays with target nuclei are presented. Methods for calculating the appropriate normalization volume elements and phase space factors are presented. Particular emphasis is placed on obtaining correct phase space factors for 2-, and 3-body final states. Calculations for both Lorentz-invariant and noninvariant phase space are presented.

Norbury, John W.↗
NASA NTRS1989

Analysis of Nd3+:glass, solar-pumped, high-powr laser systems

The operating characteristics of Nd(3+):glass lasers energized by a solar concentrator were analyzed for the hosts YAG, silicate glass, and phosphate glass. The modeling is based on the slab zigzag laser geometry and assumes that chemical hardening methods for glass are successful in increasing glass hardness by a factor of 4. On this basis, it was found that a realistic 1-MW solar-pumped laser might be constructed from phosphate glass 4 sq m in area and 2 mm thick. If YAG were the host medium, a 1-MW solar-pumped laser need only be 0.5 sq m in area and 0.5 cm thick, which is already possible. In addition, Nd(3+) doped glass fibers were found to be excellent solar-pumped laser candidates. The small diameter of fibers eliminates thermal stress problems, and if their diameter is kept small (10 microns), they propagate a Gaussian single mode which can be expanded and transmitted long distances in space. Fiber lasers could then be used for communications in space or could be bundled and the individual beams summed or phase-matched for high-power operation.

Zapata, L. E.↗
NASA NTRS1988

Cockpit automation

The aims and methods of aircraft cockpit automation are reviewed from a human-factors perspective. Consideration is given to the mixed pilot reception of increased automation, government concern with the safety and reliability of highly automated aircraft, the formal definition of automation, and the ground-proximity warning system and accidents involving controlled flight into terrain. The factors motivating automation include technology availability; safety; economy, reliability, and maintenance; workload reduction and two-pilot certification; more accurate maneuvering and navigation; display flexibility; economy of cockpit space; and military requirements.

Wiener, Earl L.↗