Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “example”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Can tract element distributions reclaim tectonomagmatic facies of basalts in greenstone assemblages?

During the past two decades many words have been written both for and against the hypothesis that the tectonic setting of a suite of igneous rocks is retained by the chemical variability within the suite. For example, it is argued that diagrams can be constructed from modern/recent basalt subcompositions within the system Ti-Zr-Y-Nb-Sr such that tectonomagmatic settings can be reclaimed. If one accepts this conclusion, it is tempting to inquire as to how far this hypothesis can be extended into other petrological realms. If chemical variations of metabasalts retain information relating to their genesis (tectonic setting), for example, this would be most helpful in reconstructing the history of basalts from greenstone belts. A discussion follows.

Butler, J. C.↗
NASA NTRS1985

On the impact of the FGGE on tropical forecasts

It has become evident from operational experience that a good forecast requires, in general, a good analysis. This is as true in the tropics as it is in the extratropics. One can find many examples of bad data being accepted by the analysis scheme and significantly degrading the subsequent forecast. Equally, a lack of data may result in a forecast completely missing the early development of, for example, a midlatitude cyclone or tropical depression. Also, single level data may be misinterpreted by an analysis scheme. These problems are compounded in the tropics by our relative ignorance of the dynamics, the necessarily crude descriptions of many important physical processes, and fundamental in analysis. The impact of the FGGE on tropical analysis/forecasting is reviewed.

Heckley, W. A.↗
NASA NTRS1986

Simplified composite micromechanics for predicting microstresses

A unified set of composite micromechanics equations is summarized and described. This unified set is for predicting the ply microstresses when the ply stresses are known. The set consists of equations of simple form for predicting three-dimensional stresses (six each) in the matrix, fiber, and interface. Several numerical examples are included to illustrate use and computational effectiveness of the equations in this unified set. Numerical results from these examples are discussed with respect to their significance on microcrack formation and, therefore, damage initiation in fiber composites.

Chamis, C. C.↗
NASA NTRS1986

Method for producing tetraphenoxide-n-aniloxy cyclo phosphazotriene

A method for producing tetraphenoxide-n-aniloxy cyclophosphazotriene, distinguished by the fact that tetraphenoxide dichlorocyclophosphazotriene is processed with an alkaline metal n-acetamidophenolate in an organic solvent, for example pyridine, during heating, after which the resulting compound is saponified in the present of a mineral or organic acid, for example, hydrochloric, and the desired product separated by well known techniques.

Khofbauer, Y. I.↗
NASA NTRS1986

Investigations with methanobacteria and with evolution of the genetic code

Mycoplasma capricolum was found by Osawa et al. to use UGA as the code of tryptophan and to contain 75% A + T in its DNA. This change could have been from evolutionary pressure to replace C + G by A + T. Numerous studies have been reported of evolution of proteins as measured by amino acid replacements that are observed when homologus proteins, such as hemoglobins from various vertebrates, are compared. These replacements result from nucleotide substitutions in amino acid codons in the corresponding genes. Simultaneously, silent nucleotide substitutions take place that can be studied when sequences of the genes are compared. These silent evolutionary changes take place mostly in third positions of codons. Two types of nucleotide substitutions are recognized: pyrimidine-pyrimidine and purine-purine interchanges (transitions) and pyriidine-purine interchanges (transversions). Silent transitions are favored when a corresponding transversion would produce an amino acid replacement. Conversely, silent transversions are favored by probability when transitions and transversions will both be silent. Extensive examples of these situations have been found in protein genes, and it is evident that transversions in silent positions predominate in family boxes in most of the examples studied. In associated research a streptomycete from cow manure was found to produce an extracellular enzyme capable of lysing the pseudomurein-contining methanogen Methanobacterium formicicum.

Jukes, T. H.↗
NASA NTRS1986

Wave propagation in anisotropic medium due to an oscillatory point source with application to unidirectional composites

The far-field displacements in an infinite transversely isotropic elastic medium subjected to an oscillatory concentrated force are derived. The concepts of velocity surface, slowness surface and wave surface are used to describe the geometry of the wave propagation process. It is shown that the decay of the wave amplitudes depends not only on the distance from the source (as in isotropic media) but also depends on the direction of the point of interest from the source. As an example, the displacement field is computed for a laboratory fabricated unidirectional fiberglass epoxy composite. The solution for the displacements is expressed as an amplitude distribution and is presented in polar diagrams. This analysis has potential usefulness in the acoustic emission (AE) and ultrasonic nondestructive evaluation of composite materials. For example, the transient localized disturbances which are generally associated with AE sources can be modeled via this analysis. In which case, knowledge of the displacement field which arrives at a receiving transducer allows inferences regarding the strength and orientation of the source, and consequently perhaps the degree of damage within the composite.

Williams, J. H., Jr.↗
NASA NTRS1986

Re-examination of cumulative fatigue damage analysis: An engineering perspective

A method which has evolved in our laboratories for the past 20 yr is re-examined with the intent of improving its accuracy and simplicity of application to engineering problems. Several modifications are introduced both to the analytical formulation of the Damage Curve Approach, and to the procedure for modifying this approach to achieve a Double Linear Damage Rule formulation which immensely simplifies the calculation. Improvements are also introduced in the treatment of mean stress for determining fatigue life of the individual events that enter into a complex loading history. While the procedure is completely consistent with the results of numerous two level tests that have been conducted on many materials, it is still necessary to verify applicability to complex loading histories. Caution is expressed that certain phenomena can also influence the applicability - for example, unusual deformation and fracture modes inherent in complex loading - especially if stresses are multiaxial. Residual stresses at crack tips, and metallurgical factors are also important in creating departures from the cumulative damage theories; examples of departures are provided.

Manson, S. S.↗
NASA NTRS1986

The design of multirate digital control systems

The successive loop closures synthesis method is the only method for multirate (MR) synthesis in common use. A new method for MR synthesis is introduced which requires a gradient-search solution to a constrained optimization problem. Some advantages of this method are that the control laws for all control loops are synthesized simultaneously, taking full advantage of all cross-coupling effects, and that simple, low-order compensator structures are easily accomodated. The algorithm and associated computer program for solving the constrained optimization problem are described. The successive loop closures , optimal control, and constrained optimization synthesis methods are applied to two example design problems. A series of compensator pairs are synthesized for each example problem. The succesive loop closure, optimal control, and constrained optimization synthesis methods are compared, in the context of the two design problems.

Berg, M. C.↗
NASA NTRS1986

Senstitivty analysis and optimization of nodal point placement for vibration reduction

A method is developed for sensitivity analysis and optimization of nodal point locations in connection with vibration reduction. A straightforward derivation of the expression for the derivative of nodal locations is given, and the role of the derivative in assessing design trends is demonstrated. An optimization process is developed which uses added lumped masses on the structure as design variables to move the node to a preselected location - for example, where low response amplitude is required or to a point which makes the mode shape nearly orthogonal to the force distribution, thereby minimizing the generalized force. The optimization formulation leads to values for added masses that adjust a nodal location while minimizing the total amount of added mass required to do so. As an example, the node of the second mode of a cantilever box beam is relocated to coincide with the centroid of a prescribed force distribution, thereby reducing the generalized force substantially without adding excessive mass. A comparison with an optimization formulation that directly minimizes the generalized force indicates that nodal placement gives essentially a minimum generalized force when the node is appropriately placed.

Pritchard, J. I.↗
NASA NTRS1985

Deformation of the heliospheric current sheet

A kinematic analysis of the previously neglected effect of velocity inhomogeneity on the topology of the heliospheric current sheet in a radially flowing solar wind shows how the originally smooth current sheet becomes 'ruffled'. In the highly idealized case of a totally uniform, radial, steady solar wind, the shape of the current sheet is independent of distance from the sun. However, the real solar wind is inhomogeneous; the velocity varies from point to point along the current sheet, causing a distortion in the current sheet of progressively greater amplitude with increasing distance from the sun. This is true even for purely radial flow. Significant and observable distortion is produced by relatively small gradients in velocity; thus to predict or understand the shape of the heliospheric current sheet it is essential to know the solar wind in which the current sheet is embedded. Examples are given of mild velocity gradients which demonstrate the principles, the magnitude, and the character of the effect; deformation of the actual heliospheric current sheet in the highly variable solar wind is expected to be of far greater amplitude and complexity than in the simplified, tutorial examples. A new expression for the inclination of the current sheet as a function of velocity inhomogeneity and distance from the sun that is easily applied to the interpretation of solar wind data is also derived.

Suess, S. T.↗
NASA NTRS1985

Clathrate hydrates in the solar system

Clathrate hydrates are crystalline compounds in which an expanded ice lattice forms cages that contain gas molecules. There are two principal hydrate structures. Structure I, with a 12 A cubic unit cell, contains 46 water molecules and 8 cages of two types, giving an ideal formula (for CH4) of CH4.5.75H2O. The actual formula contains somewhat more water as the cages are not completely filled. Other examples that form Structure I hydrates are C2H6, C2H4, C2H2, CO2, SO2, OCS, Xe, H2S. Structure II, with a 17 A cubic unit cell, contains 136 water molecules, and 8 large and 16 small cages. The ideal formula for CHCl3 is CHCL3.17H2O. Other examples of Structure II hydrates include C3H8, C2H5Cl, acetone, and tetrahydrofuran. Small molecules such as Ar, Kr and probably N2 and O2 also form a Structure II hydrate. The small molecules occupy both the large and small cages, giving an ideal formula of Ar.5.67H2O. The conditions of pressure and temperature for hydrate formation are discussed.

Miller, S. L.↗
NASA NTRS1986

Exponential order statistic models of software reliability growth

Failure times of a software reliability growth process are modeled as order statistics of independent, nonidentically distributed exponential random variables. The Jelinsky-Moranda, Goel-Okumoto, Littlewood, Musa-Okumoto Logarithmic, and Power Law models are all special cases of Exponential Order Statistic Models, but there are many additional examples also. Various characterizations, properties and examples of this class of models are developed and presented.

Miller, D. R.↗
NASA NTRS1985

Structural analysis model validation using modal test data

The design of a structure which can survive a prescribed dynamic environment is generally based on the use of an analytical model of the structure. The modal test is employed to verify the analytical model. This paper is concerned with the involved validation process, taking into account modal test results from realistic complex spacecraft structural systems as examples to demonstrate the proposed validation procedure. Attention is given to a load analysis model definition, a pretest analysis and test/analysis model, and the correlation parameters. Coordinate transformation is considered along with mode identification, frequency orthogonality, effective mass, mode shape, local kinetic energy, modal force, strain energy, and modal forces by acceleration measurements. Two examples are used to illustrate the procedure.

Chen, J.-C.↗
NASA NTRS1985

Designing for fiber composite structural durability in hygrothermomechanical environments

A methodology is described which can be used to design/analyze fiber composite structures subjected to complex hygrothermomechanical environments. This methodology includes composite mechanics and advanced structural analysis methods (finite element). Select examples are described to illustrate the application of the available methodology. The examples include: (1) composite progressive fracture; (2) composite design for high cycle fatigue combined with hot-wet conditions; and (3) general laminate design.

Chamis, C. C.↗
NASA NTRS1986

Achieving improved frequency response of the rain structure from spaceborne radar altimeters by employing deconvolution methods

A technique is described for arriving at improved measurements of the rain structure near the earth's surface from satellite-borne radars. The method uses deconvolution and Fourier transform procedures and assumes a knowledge of the antenna beam pattern. As an example, the method is directed toward the application of future spaceborne radar altimeters that may contain additional range gates to permit the measurement of rain in the lower troposphere. Using a radar-measured rain reflectivity profile acquired at Wallops Island, VA, in a simulation example, it is specifically demonstrated that improved measurements of the spatial frequency spectrum of the rain structure may be deduced by means of deconvolution methods, as compared to the measured spectrum derived by beam averaging. Rain measurements are considered vital from the standpoint of providing a flag for altimeter data that may be corrupted by rain. Such measurement capabilities should also provide sorely needed data on rain over the oceans where few or no such data are available for the meteorologist or the communicator interested in space diversity communications.

Goldhirsh, J.↗
NASA NTRS1985

Demonstration of a new, fast probability integration method for reliability analysis

The performance of a new, fast probability integration method which combines an improved equivalent normal concept and a scheme for linearizing a quadratic limit state is carefully examined. The examples tested include various combinations of linear and nonlinear limit states with normal and nonnormal variables; some examples are considered the worst possible cases. It is demonstrated that the new method is able to provide accurate probability-of-failure estimates for most cases and performs reasonably well when the Rackwitz-Fiessler method produces severe errors.

Wu, Y.-T.↗
NASA NTRS1985

Cost containment and KSC Shuttle facilities or cost containment and aerospace construction

This presentation has the objective to show examples of Cost Containment of Aerospace Construction at Kennedy Space Center (KSC), taking into account four major levels of Project Development of the Space Shuttle Facilities. The levels are related to conceptual criteria and site selection, the design of construction and ground support equipment, the construction of facilities and ground support equipment (GSE), and operation and maintenance. Examples of cost containment are discussed. The continued reduction of processing time from landing to launching represents a demonstration of the success of the cost containment methods. Attention is given to the factors which led to the selection of KSC, the use of Cost Engineering, the employment of the Construction Management Concept, and the use of Computer Aided Design/Drafting.

Brown, J. A.↗
NASA NTRS1985

On accuracy conditions for the numerical computation of waves

The Helmholtz equation (Delta + K(2)n(2))u = f with a variable index of refraction n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. Such problems can be solved numerically by first truncating the given unbounded domain and imposing a suitable outgoing radiation condition on an artificial boundary and then solving the resulting problem on the bounded domain by direct discretization (for example, using a finite element method). In practical applications, the mesh size h and the wave number K, are not independent but are constrained by the accuracy of the desired computation. It will be shown that the number of points per wavelength, measured by (Kh)(-1), is not sufficient to determine the accuracy of a given discretization. For example, the quantity K(3)h(2) is shown to determine the accuracy in the L(2) norm for a second-order discretization method applied to several propagation models.

Bayliss, A.↗