Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhanced sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Ethanol gas sensing by Zn-doped CdS/CdTe nanoparticles

Zn-doped CdS/CdTe nanoparticles (NPs) were synthesized and studied here for gas sensing. The crystallographic properties of the samples were studied by X-ray diffraction (XRD), which shows cubic structure for CdS and CdTe NPs. The three longitudinal optical phonon modes at 298, 595 and 895 cm{sup −1} were obtained from Raman spectrum and this also reveals the cubic structure of CdS NPs. The band gap for Zn-doped CdS/CdTe NPs increased slightly when compared with pure sample. The ethanol gas sensing in CdS/CdTe NPs shows an enhancement on Zn substitution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Resolving the nanostructure of plasma-enhanced chemical vapor deposited nanocrystalline SiO{sub x} layers for application in solar cells

Nanocrystalline silicon suboxides (nc-SiO{sub x}) have attracted attention during the past years for the use in thin-film silicon solar cells. We investigated the relationships between the nanostructure as well as the chemical, electrical, and optical properties of phosphorous, doped, nc-SiO{sub 0.8}:H fabricated by plasma-enhanced chemical vapor deposition. The nanostructure was varied through the sample series by changing the deposition pressure from 533 to 1067 Pa. The samples were then characterized by X-ray photoelectron spectroscopy, spectroscopic ellipsometry, Raman spectroscopy, aberration-corrected high-resolution transmission electron microscopy, selected-area electron diffraction, and a specialized plasmon imaging method. We found that the material changed with increasing pressure from predominantly amorphous silicon monoxide to silicon dioxide containing nanocrystalline silicon. The nanostructure changed from amorphous silicon filaments to nanocrystalline silicon filaments, which were found to cause anisotropic electron transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light emission and magnetic properties of aluminum films grown on SrTiO{sub 3} by molecular beam epitaxy

Aluminum films were grown on SrTiO{sub 3} (100) substrates using a plasma-assisted molecular beam epitaxy system. We found that the intensity of defect emission coming through the Al films was enhanced to two fold. Although the surface plasmon energy is far from the defect emission, off-resonance enhancement is still possible from Al/SrTiO{sub 3}. Moreover, the samples with Al films exhibits ferromagnetism, with wasp-waist hysteresis loops and exchange bias effects. The ferromagnetism may be attributed to the charge transfer between Al and the SrTiO{sub 3} matrix. This work is valuable in developing SrTiO{sub 3} which is a promising material used in optical and magnetic related application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PAC in DESI. I. Galaxy stellar mass function into the 10 6 M ⊙ frontier

The Photometric objects Around Cosmic webs (PAC) method integrates cosmological photometric and spectroscopic surveys, offering valuable insights into galaxy formation. PAC measures the excess surface density of photometric objects, $\bar{n}_2w_{{\rm {p}}}$, with specific physical properties around spectroscopic tracers. In this study, we improve the PAC method to make it more rigorous and eliminate the need for redshift bins. We apply the enhanced PAC method to the DESI Y1 BGS Bright spectroscopic sample and the deep Dark Energy Camera Legacy Survey (DECaLS) photometric sample, obtaining $\bar{n}_2w_{{\mathrm {p}}}$ measurements across the complete stellar mass range, from $10^{5.3}$ to $10^{11.5}\,{\rm M}_{\odot }$ for blue galaxies, and from $10^{6.3}$ to $10^{11.9}\,{\rm M}_{\odot }$ for red galaxies. We combine $\bar{n}_2w_{{\rm {p}}}$ with $w_{{\rm {p}}}$ measurements from the BGS sample, which is not necessarily complete in stellar mass. Assuming that galaxy bias is primarily determined by stellar mass and colour, we derive the galaxy stellar mass functions (GSMFs) down to $10^{5.3}\,{\rm M}_{\odot }$ for blue galaxies and $10^{6.3}\,{\rm M}_{\odot }$ for red galaxies, while also setting lower limits for smaller masses. The blue and red GSMFs are well described by single and double Schechter functions, respectively, with low-mass end slopes of $\alpha _{\rm {blue}}=-1.54^{+0.02}_{-0.02}$ and $\alpha _{\rm {red}}=-2.50^{+0.08}_{-0.08}$, resulting in the dominance of red galaxies below $10^{7.6}\,{\rm M}_{\odot }$. Stage-IV cosmological photometric surveys, capable of reaching 2–3 mag deeper than DECaLS, present an opportunity to explore the entire galaxy population in the local universe with PAC. This advancement allows us to address critical questions regarding the nature of dark matter, the physics of reionization, and the formation of dwarf galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Combinatorial split-ring and spiral metaresonator for efficient magnon-photon coupling

Developing hybrid materials and structures for electromagnetic wave engineering has been a promising route towards novel functionalities and tunabilities in many modern applications. Despite its established success in engineering optical light and terahertz waves, the implementation of metaresonators operating in the microwave band is still emerging, especially the implementation of metaresonators that allow on-chip integration and size miniaturization, which is crucial for developing hybrid quantum systems in the microwave band. In this work, we present a microwave metaresonator consisting of split-ring and spiral resonators, and implement it for the investigation of photon-magnon coupling for hybrid magnonic applications. We observe broadened bandwidth of the split-ring modes augmented by the additional spiral resonator, and, by coupling the modes to a magnetic sample, the resultant photon-magnon coupling can be significantly enhanced by more than tenfold. Furthermore, our work suggests that combinatorial, hybrid microwave resonators may be a promising approach towards future development and implementation of photon-magnon coupling in hybrid magnonic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature dependence and limiting mechanisms of the upper critical field of FeSe thin films

We use magnetoresistance measurements at high magnetic field (μ 0⁢ H ≤ 65 T) and low temperature (T ≥ 500 mK) to gain fresh insights into the behavior of the upper critical field H c⁢2 in superconducting ultrathin FeSe films of varying degrees of disorder, grown by molecular beam epitaxy on SrTiO 3 . Measurements of H c⁢2 across samples with a widely varying superconducting critical temperature (1.2 K ≤ T c ≤ 21 K) generically show similar qualitative temperature dependence. Here, we analyze the temperature dependence of H c⁢2 in the context of Werthamer-Helfand-Hohenberg (WHH) theory. The analysis yields parameters that indicate a strong Pauli paramagnetic pair-breaking mechanism which is also reflected by pseudoisotropic superconductivity in the limit of zero temperature. In the lower T c samples, we observe a spin-orbit scattering-driven enhancement of H c⁢2 above the strongly-coupled Pauli paramagnetic limit. We also observe clear deviations from WHH theory at low temperature, regardless of T c . We attribute this to the multiband superconductivity of FeSe and possibly to the emergence of a low-temperature, high-field superconducting phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mott, Floquet, and the response of periodically driven Anderson insulators

We consider periodically driven Anderson insulators. The short-time behavior for weak, monochromatic, uniform electric fields is given by linear response theory and was famously derived by Mott. We go beyond this to consider both long times—which is the physics of Floquet late time states—and strong electric fields. This results in a “phase diagram” in the frequency-field strength plane, in which we identify four distinct regimes. Furthermore, these are a linear response regime dominated by preexisting Mott resonances, which exists provided Floquet saturation is not reached within a period; a nonlinear perturbative regime, which exhibits multiphoton-absorption in response to the field; a near-adiabatic regime, which exhibits a primarily reactive response spread over the entire sample and is insensitive to preexisting resonances; and finally an enhanced dissipative regime.

1-dimensional systems↗

Low-loss Si-based Dielectrics for High Frequency Components of Superconducting Detectors

Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric and metal layers can cause microwave losses and degrade device performance. Optimization of the dielectric fabrication, device structure, and surface morphology can help mitigate this problem. We present the fabrication of silicon oxide and nitride thin film dielectrics. We then characterized them using Scanning Electron Microscopy, Atomic Force Microscopy, and spectrophotometry techniques. The samples were synthesized using various deposition methods, including Plasma-Enhanced Chemical Vapor Deposition and magnetron sputtering. The film's morphology and structure were modified by adjusting the deposition pressure and gas flow. The resulting films were used in superconducting resonant systems consisting of planar inductors and capacitors. Measurements of the resonator properties, including their quality factor, were performed.

low-loss dielectrics↗

Optics-Free Chip-Scale Intraoperative Imaging Using NIR-Excited Upconverting Nanoparticles

Here we present an optics-free CMOS image sensor that incorporates a novel time-gated dual-photodiode pixel design to allow filter- and lens-less image acquisition of near-infrared-excited (NIR-excited) upconverting nanoparticles. Recent biomedical advances have highlighted the benefits of NIR excitation, but NIR interaction with silicon has remained a challenge, even with high-performance optical blocking filters. Using a secondary diode and a dual-photodiode design, this sensor is able to remove the 100s of mV of NIR background on pixels and bring it down to single-digit mV level, nearing its noise floor of 2.2 mV rms, not achievable with any optical filter. Non-linear effects of background cancellation using the diode pair has been mitigated using an initial one-time pixel-level curve fitting and calibration in a post-processing setting. This imager comprises a highly linear 11 fF metal-oxide-metal (MOM) capacitor and includes integrated angle-selective gratings to reject oblique light and enhance sharpness. Each pixel also includes two distinct correlated double sampling schemes, to remove low frequency flicker noise and systematic offset in the datapath. We demonstrate the performance of this imager using pulsed NIR-excited upconverting nanoparticles on standard United-States-Air-Force (USAF) resolution targets and achieve an SNR of 15 dB, while keeping NIR background below 6 mV. This 36-by-80-pixel array measures only 2.3 mm by 4.8 mm and can be thinned down to 25 µm, allowing it to become surgically compatible with intraoperative instruments and equipment, while remaining optics-free.

42 ENGINEERING↗

Encoding Frequency Constraints in Preventive Unit Commitment Using Deep Learning With Region-of-Interest Active Sampling

With the increasing penetration of renewable energy, frequency response and its security are of significant concerns for reliable power system operations. Frequency-constrained unit commitment (FCUC) is proposed to address this challenge. Despite existing efforts in modeling frequency characteristics in unit commitment (UC), current strategies can only handle oversimplified low-order frequency response models and do not consider wide-range operating conditions. This paper presents a generic data-driven framework for FCUC under high renewable penetration. Here, deep neural networks (DNNs) are trained to predict the frequency response using real data or high-fidelity simulation data. Next, the DNN is reformulated as a set of mixed-integer linear constraints to be incorporated into the ordinary UC formulation. In the data generation phase, all possible power injections are considered, and a region-of-interest active sampling is proposed to include power injection samples with frequency nadirs closer to the UFLC threshold, which enhances the accuracy of frequency constraints in FCUC. The proposed FCUC is investigated on the IEEE 39-bus system. Then, a full-order dynamic model simulation using PSS/E verifies the effectiveness of FCUC in frequency-secure generator commitments.

42 ENGINEERING↗

Deployment of ADTimePix3 areaDetector Driver at Neutron and X-ray User Facilities

TimePix3 is a 65k hybrid pixel readout chip with simultaneous Time-of-Arrival (ToA) and Time-over-Threshold (ToT) recording in each pixel*. The chip operates without a trigger signal with a sparse readout where only pixels containing events are read out. The flexible architecture allows 40 MHits/s/cm² readout throughput, using simultaneous readout and acquisition by sharing readout logic with transport logic of superpixel matrix formed using 2x4 structure. The chip ToA records 1.5625 ns time resolution. The X-ray and charged particle events are counted directly. However, indirect neutron counts use 6Li fission in a scintillator matrix, such as ZnS(Ag). The fission space-charge region is limited to 5-9 um. A photon from scintillator material excites a photocathode electron, which is further multiplied in dual-stack MCP. The neutron count event is a cluster of electron events at the chip. We report on the EPICS areaDetector** ADTimePix3 driver that controls Serval*** using json commands. The driver directs data to storage and to a real-time processing pipeline and configures the chip. The time-stamped data are stored in raw .tpx3 file format and passed through a socket where the clustering software identifies individual neutron events. The conventional 2D images are available as images for each exposure frame, and a preview is useful for sample alignment. The areaDetector driver allows integration of time-enhanced capabilities of this detector into SNS beamlines controls and unprecedented time resolution.

Gofron, Kaz↗

Enhancement of Structural Health Monitoring Framework by Optimizing Vibro-Acoustic Modulation Technique to Localize Alkali-Silica Reaction Degradation in Medium-Sized Concrete Samples

Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Health monitoring of concrete structures is performed to understand the current condition of a structure based on heterogeneous measurements and then produce high confidence actionable information regarding structural integrity. This information can then be used to support operational and maintenance decisions. The objectives of this ongoing research project focus on health monitoring and data analytics of concrete slabs containing reactive aggregates and thus subjected to degradation due to alkali-silica reaction (ASR). A controlled concrete slab with four pockets of reactive aggregates (pure silica, wells, placitas, and spratt) was cast at Vanderbilt University and cured in representative conditions to accelerate degradation due to ASR. A set of four concrete samples were also cast and cured at the University of Alabama for ASR testing. Of these four samples, two slabs contained reactive aggregates while the other two had the non-reactive aggregate counterparts mixed throughout the samples. Vibro-acoustic methods were used on these slabs to locate large pockets of ASR within the reactive samples and determine the effects of rebar using the non-reactive slabs. Vibro-acoustic modulation (VAM) is a vibration-based NDE method that utilizes signatures of nonlinear dynamic interactions on contact surfaces of crack or delamination damage to detect and localize the damage. VAM analysis was conducted on both Vanderbilt and Alabama’s samples using multiple variables for damage detection and localization. The results from the data analysis of the NDE vibro-acoustic techniques on concrete slabs cured at Vanderbilt University and the University of Alabama are discussed in detail in this report. The major outcome of the analysis suggests that the VAM method can be used to detect damage within the concrete samples by comparing the results found in different sections of the samples. Results for damage localization are dependent on multiple variables used in the vibro-acoustic modulation experiments. Digital image correlation (DIC) is a three-dimensional, full-field, optical NDE technique to measure contour, deformation, vibration, and strain. The application of the digital image correlation technique to study ASR-related degradation on a large concrete sample at the University of Tennessee Knoxville is discussed and observations are presented in this report.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High Gradient Magnetic Simulation Final Report 2025

Over the course of nearly 2 years, the goal of this project has been to identify methods for the separation of uranium oxide particles from other geologic materials. The primary motivation is to assess methods for enhancing the extraction and throughput of actinide particles from environmental samples, enabling the evaluation of these trace actinides through more traditional methods such as thermal ionization mass spectrometry or secondary ion mass spectrometry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Investigating Temperature Uniformity and Accuracy in PV Module Lamination: A Verification Study

This study investigates the temperature uniformity and accuracy of a photovoltaic (PV) module lamination process by addressing inconsistencies identified in 2017 data where irregular temperature changes were observed across setpoints. The 2017 data showed a notable drop in temperature upon bladder initiation, except for the 145 degrees Celsius profile. This inconsistency indicated potential inaccuracies in manual data recording methods. To address this concern, a verification experiment was conducted to evaluate temperature uniformity across the 2014 Bent River SPL2828 laminator platen and within test samples. Thermocouples, paired with Omega data acquisition software, were deployed to measure temperatures at multiple platen locations and within test samples. The experiment compared lamination temperatures of polyethylene-co-vinyl acetate (EVA) encapsulant when paired with solite glass or TPE backsheets. The methodology included verifying temperature uniformity directly on the platen and by using a large glass/EVA/glass sample using multiple thermocouples. Smaller samples were built with glass/EVA/glass and glass/EVA/backsheet configurations with one centered thermocouple to verify and compare sample temperatures. This verification aims to refine lamination temperature profiles, enhance data accuracy and provide insights into optimal process control for uniform module lamination. Ensuring consistent and uniform lamination may improve the accuracy and reliability of research outcomes.

14 SOLAR ENERGY↗

The chemical evolution of the boÖtes I ultra-faint dwarf galaxy

We present chemical abundance measurements of two metal-poor red giant stars in the ultra-faint dwarf galaxy Boötes I, based on Magellan/MIKE high-resolution spectra. For Boo-980, with [Fe/H]=−3.1, we present the first elemental abundance measurements, while Boo-127, with [Fe/H]=−2.0, shows abundances in good agreement with previous measurements. Light and iron-peak element abundance ratios in the two Boötes I stars, as well as those of most other Boötes I members, collected from the literature, closely resemble those of regular metal-poor halo stars. Neutron-capture element abundances Sr and Ba are systematically lower than the main halo trend and also show a significant abundance spread. Overall, this is similar to what has been found for other ultra-faint dwarf galaxies. We apply corrections to the carbon abundances (commensurate with stellar evolutionary status) of the entire sample and find 21% of stars to be carbon-enhanced metal-poor (CEMP) stars, compared to 13% without using the carbon correction. We reassess the metallicity distribution functions for the CEMP stars and non-CEMP stars, and confirm earlier claims that CEMP stars might belong to a different, earlier population. Applying a set of abundance criteria to test to what extent Boötes I could be a surviving first galaxy suggests that it is one of the earliest assembled systems that perhaps received gas from accretion from other clouds in the system, or from swallowing a first galaxy or building block type object. This resulted in the two stellar populations observable today.

79 ASTRONOMY AND ASTROPHYSICS↗

Chemical Cartography. I. A Carbonicity Map of the Galactic Halo

We present the first map of carbonicity, [C/Fe], for the halo system of the Milky Way, based on a sample of over 100,000 main-sequence turnoff stars with available spectroscopy from the Sloan Digital Sky Survey. This map, which explores distances up to 15 kpc from the Sun, reveals clear evidence for the dual nature of the Galactic halo, based on the spatial distribution of stellar carbonicity. The metallicity distribution functions of stars in the inner- and outer-halo regions of the carbonicity map reproduce those previously argued to arise from contributions of the inner- and outer-halo populations, with peaks at [Fe/H] = −1.5 and −2.2, respectively. From consideration of the absolute carbon abundances for our sample, A (C), we also confirm that the carbon-enhanced metal-poor (CEMP) stars in the outer-halo region exhibit a higher frequency of CEMP-no stars (those with no overabundances of heavy neutron-capture elements) than of CEMP- s stars (those with strong overabundances of elements associated with the s -process), whereas the stars in the inner-halo region exhibit a higher frequency of CEMP- s stars. We argue that the contrast in the behavior of the CEMP-no and CEMP- s fractions in these regions arises from differences in the mass distributions of the mini-halos from which the stars of the inner- and outer-halo populations formed, which gives rise in turn to the observed dichotomy of the Galactic halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Interaction of NaCl(g) and HCl(g) with condensed NA2SO4

The interaction of Na2SO4(l) with NaCl(g), HCl(g) and H2O(g) was studied in atmospheric pressure flowing air and oxygen at Na2SO4(l) temperatures of 900 and 1000 C. Thermomicrogravimetric and high pressure mass spectrometric sampling techniques were used. Experimental results establish that previously reported enhanced rates of weight loss of Na2SO4(l) in the presence of NaCl(g) are due to the reaction: Na2SO4(c) + 2HCl(g) = 2NaCl(g) + SO2(g) + H2O(g) + 1/2O2(g) being driven to the right in flowing gas systems. The HCl(g) is the product of hydrolysis of NaCl caused by small but significant amounts of H2O(g) present in the system. Thermochemical calculations are used to show that even with sub-ppm levels of H2O(g) present, significant quantities of HCl(g) are produced.

Stearns, C. A.↗

Sampling of Silicon Powder for Impurity Analysis

Electron beam forms dense pellets of powdered silicon for Zeeman analysis. Sampling method focuses electron beam on submicron silicon powder. Process enhances quality control in production of low-cost silicon powder for semiconductor industry.

Yamakawa, K. A.↗