Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Liquid metal embrittlement in laser lap joining of TWIP and medium-manganese TRIP steel: The role of stress and grain boundaries

Highlights: • This work shows liquid metal embrittlement in externally loaded laser lap welding. • Results confirmed a direct relation between external load and LME susceptibility. • TWIP steel showed a higher LME susceptibility compared to medium-Mn TRIP steel. • Results indicated stress-assisted diffusion of Zn into austenite grain boundaries. • High angle grain and Σ3 twinning boundaries play major role in Zn penetration. - Abstract: High-Manganese austenite-containing steels with superior combination of strength and ductility have shown potential for enhancement of passenger safety and body-in-white (BIW) weight reduction. Even though Zn-coated austenitic steels have improved corrosion resistance, they are highly susceptible to liquid metal embrittlement (LME) during welding. The present work is aimed to address LME susceptibility during restrained laser lap joining of high-Mn twinning induced plasticity (TWIP) and medium-Mn transformation induced plasticity (MMn-TRIP) steels. Electron probe micro-analysis (EPMA) results showed that stress-assisted diffusion of Zn into the austenite grain boundaries and further liquid Zn formation by a peritectic reaction lead to grain boundary decohesion. Electron backscatter diffraction (EBSD) results demonstrated that high angle and special grain boundaries are prone to Zn-penetration within the heat-affected-zone (HAZ). Additionally, LME sensitivity was observed to be highly dependent on the magnitude of applied stress.

36 MATERIALS SCIENCE↗

Comparative X-Ray Absorption Analysis of the Spectrum of Vacant Electronic States in Cobalt and Nickel Tetraphenylporphyrin Complexes

The energy distributions and the properties of the lower vacant electronic states in cobalt and nickel tetraphenylporphyrin complexes CoTPP and NiTPP are studied by X-ray absorption spectroscopy. Quasimolecular analysis of the experimental absorption spectra measured in the region of the 2p and 1s ionization thresholds of complexing metal atoms, as well as the 1s thresholds of ligand atoms (nitrogen and carbon), is based on the comparison of the corresponding spectra with each other and with the spectra of the simplest nickel porphyrin NiP. It has been established that, despite a general similarity of the spectra of nitrogen and carbon in CoTPP and NiTPP, the fine structure of the 2p and 1s absorption spectra of cobalt and nickel atoms are radically different. The observed differences in the spectra of cobalt and nickel are associated with the features of the energy distribution of vacant 3d electron states. The presence in CoTPP of the partially filled valence 3db{sub 2g} molecular orbital (MO) results in the appearance in the cobalt spectra of a low-energy band, which is absent in the spectrum of nickel in NiTPP and leads to a doublet structure of transitions to b{sub 1g} and e{sub g} MOs due to the exchange interaction between 3d electrons in partially filled 3db{sub 2g} and 3db{sub 1g} or 3de{sub g} MOs. The spectrum of vacant states in CoTPP differs from that in NiTPP also due to the smaller energy distance between 3db{sub 1g} and e{sub g} MOs and the different positions of nonbonding MOs with the C2p character of the porphine ligand.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization and Failure Analysis of 650-V Enhancement-Mode GaN HEMT for Cryogenically Cooled Power Electronics

In order to evaluate the feasibility of newly developed gallium nitride (GaN) devices in a cryogenically cooled converter, this article characterizes a 650-V enhancement-mode GaN high-electron mobility transistor (GaN HEMT) at cryogenic temperatures. The characterization includes both static and dynamic behaviors. The results show that this GaN HEMT is an excellent device candidate to be applied in cryogenic-cooled applications. For example, transconductance at cryogenic temperature (93 K) is 2.5 times higher than one at room temperature (298 K), and accordingly, peak di / dt during turn-on transients at cryogenic temperature is around 2 times of that at room temperature. Moreover, the ON-resistance of the channel at the cryogenic temperature is only one-fifth of that at room temperature. The corresponding explanations of performance trends at cryogenic temperatures are also given from the view of semiconductor physics. In addition, several device failures were observed during the dynamic characterization of GaN HEMTs at cryogenic temperatures. Additionally, the ultrafast switching speed-induced high di / dt and dv / dt at cryogenic temperatures amplify the negative effects of parasitics inside the switching loop. Based on failure waveforms, two failure modes were classified, and detailed failure mechanisms caused by ultrafast switching speed are given in this article.

42 ENGINEERING↗

Thermoelastic analysis of a silicon surface under x-ray free-electron-laser irradiation

We present an analysis of the time evolution of a highly excited silicon substrate after partial absorption of a femtosecond soft x-ray pulse. The detailed time-dependent thermoelastic behavior of the substrate in terms of the displacements u(r,t) is derived for time delays for which the usual local thermodynamic variables, temperature T(r,t) and density n(r,t), become well-defined, namely, a few hundred femtoseconds after x-ray pulse absorption. For practical optical components under present conditions of operation with trains of pulses, we find that in a worst case scenario, already the second pulse in the train could be adversely affected by dynamic thermal distortion induced by the preceding pulse.

36 MATERIALS SCIENCE↗

Effect of initial orientation on dynamic recrystallization of a zirconium alloy during hot deformation

Highlights: • The dynamic recrystallization process is enhanced by the operation of slip. • Continuous dynamic recrystallization is promoted by the rotation of grains. • Texture induced hardening hides the softening induced by dynamic recrystallization. - Abstract: The present study investigated the influence of the initial orientation on the dynamic recrystallization (DRX) behavior of a Zr-1Sn-0.3Nb alloy. A hot-rolled and annealed Zr sheet was compressed along two directions: along the normal direction so that the grains' -axis was nearly parallel to the loading direction (0° sample) and along the transverse direction so that the grains' -axis was nearly perpendicular to the loading direction (90° sample). The samples were compressed at 700 °C at a strain rate of 1 s{sup −1}. The microstructures at different strains were characterized by the electron backscatter diffraction (EBSD) technique, and conventional dislocation analysis using transmission electron microscope (TEM) was performed. A threshold value of grain orientation spread (GOS) equaled to 5° was used to distinguish the dynamically recrystallized grains from the deformed matrix. The results revealed that the DRX behavior strongly depended on the initial orientation. The Schmid factor analysis and TEM observation confirmed that pyramidal slip operated from the first stage of deformation in the 0° sample but not in the 90° sample. For the 0° sample, in the early and medium stages of deformation, due to the high stored energy caused by the operation of pyramidal slip, DDRX was mainly contributed to the formation of new fine grains. However, in the later stage of deformation, the DRX mechanism changed from DDRX to CDRX. In the 90° sample, although DDRX featured by grain boundary bulging occurred, the main DRX mechanism was CDRX in the whole deformation processing. Moreover, texture induced hardening in the early stage of deformation hides the softening induced by DDRX.

36 MATERIALS SCIENCE↗

Highly fluorescent silver nanoclusters in alumina-silica composite optical fiber

An efficient visible fluorescent optical fiber embedded with silver nanoclusters (Ag-NCs) having size ∼1 nm, uniformly distributed in alumina-silica composite core glass, is reported. Fibers are fabricated in a repetitive controlled way through modified chemical vapour deposition process associated with solution doping technique. Fibers are drawn from the transparent preforms by conventional fiber drawing process. Structural characteristics of the doped fibers are studied using transmission electron microscopy and electron probe micro analysis. The oxidation state of Ag within Ag-NCs is investigated by X-ray photo electron spectroscopy. The observed significant fluorescence of the metal clusters in fabricated fibers is correlated with electronic model. The experimentally observed size dependent absorption of the metal clusters in fabricated fibers is explained with the help of reported results calculated by ab-initio density functional theory. These optical fibers may open up an opportunity of realizing tunable wavelength fiber laser without the help of rare earth elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of shot noise in photoresists for extreme ultraviolet lithography through comparative analysis of line edge roughness in electron beam and extreme ultraviolet lithography

In this paper, the influence of the absorption shot noise on line edge roughness (LER) of photoresists for extreme ultraviolet (EUV) lithography is studied experimentally through the comparative analysis of LER obtained by EUV (92 eV photons) and 100 keV e-beam lithography. Techniques for performing EUV and e-beam lithography with a matched image log slope for a fair comparison of LER values are described. Measurements of absorption of 100 keV electrons estimated through a transmissive electron energy loss spectroscopy measurement with a 120 keV electron beam showed that despite having access to core levels in the material (e.g., 284 eV edge in carbon), these electrons mostly just excite the energy levels less than 100 eV in the resist, with a mean deposited energy of 35 eV. By combining the incident flux and the absorption probabilities, the absorbed quanta for patterning of 50 nm half-pitch line/space features was found to be similar between the two patterning technologies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Human alpha A-crystallin missing N-terminal domain poorly complexes with filensin and phakinin

Highlights: • In vitro complexes between αA, its deletion mutants with filensin and phakinin was determined. • Complexes were determined following ultracentrifugation and by electron microscopic methods. • N-terminal domain of αA-crystallin is needed to form complex with filensin and phakinin in vitro. The aim of this study was to determine relative importance of N-terminal domain and C-terminal extension of αA-crystallin during their in vitro complex formation with phakinin and filensin (the two lens-specific intermediate filament [IF] proteins). Cloned phakinin, filensin and vimentin were purified under a denaturing conditions by consecutive DEAE-cellulose-, hydroxyapatite- and Sephadex G-75-column chromatographic methods. WTαA-crystallin, αA-NT (N-terminal domain [residue number 1–63])-deleted and αA-CT (C-terminal terminal extension [residue number 140–173]-deleted), were cloned in pET 100 TOPO vector, expressed in BL-21 (DE3) cells using 1% IPTG, and purified using a Ni{sup 2+}-affinity column. The following two in vitro methods were used to determine complex formation of WT-αA, αA-NT, or αA-CT with phakinin, filensin or both phakinin plus filensin together: an ultracentrifugation sedimentation (centrifugation at 80,000 × g for 30 min at 20 °C) followed by SDS-PAGE analysis, and an electron microscopic analysis. In the first method, the individual control proteins (WT-αA, αA-NT and αA-CT crystallin species) remained in the supernatant fractions whereas phakinin, filensin, and vimentin were recovered in the pellet fractions. On complex formation by individual WT-αA-, αA-NT or αA-CT-species with filensin, phakinin or both phakinin and filensin, WT-αA and αA-CT were recovered in the pellet fraction with phakinin, filensin or both filensin and phakinin, whereas αA-NT remained mostly in the supernatant, suggesting its poor complex formation property. EM-studies showed filamentous structure formation between WT-αA and αA-CT with phakinin or filensin, or with both filensin and phakinin together but relatively poor filamentous structures with αA-NT. Together, the results suggest that the N-terminal domain of αA-crystallin is required during in vitro complex formation with filensin and phakinin.

60 APPLIED LIFE SCIENCES↗

Field-Flow Fractionation of Carbon Nanotubes and Related Materials

During the grant period, we carried out FFF studies of carbonaceous soot, single-walled and multi-walled carbon nanotubes, carbon nano-onions and polyoxometallates. FFF alone does not provide enough information to fully characterize samples, so our suite of characterization techniques grew to include light scattering (especially Photon Correlation Spectroscopy), scanning and transmission electron microscopy, thermogravimetric analysis and spectroscopic methods. We developed convenient techniques to deposit and examine minute FFF fractions by electron microscopy. In collaboration with Arthur Cammers (University of Kentucky), we used Flow Field-Flow Fractionation (Fl-FFF) to monitor the solution-phase growth of keplerates, a class of polyoxometallate (POM) nanoparticles. We monitored the evolution of Mo-POM nanostructures over the course of weeks by by using flow field-flow fractionation and corroborated the nanoparticle structures by using transmission electron microscopy (TEM). Total molybdenum in the solution and precipitate phases was monitored by using inductively coupled plasma analyses, and total Mo-POM concentration by following the UV-visible spectra of the solution phase. We observe crystallization-driven formation of (Mo132) keplerate and solution phase-driven evolution of structurally related nanoscopic species (3-60 nm). FFF analyses of other classes of materials were less successful. Attempts to analyze platelets of layered materials, including exfoliated graphite (graphene) and TaS2 and MoS2, were disappointing. We were not able to optimize flow conditions for the layered materials. The metal sulfides react with the aqueous carrier liquid and settle out of suspension quickly because of their high density.

36 MATERIALS SCIENCE↗

Understanding Formation of Irradiation-Induced Defects through 4D-STEM, Electron Tomography, and WBDF-STEM

A major challenge in advancing nuclear materials for next-generation fission and proposed fusion reactors is to comprehensively understand the formation of irradiation-induced defects. Here it is essential to correlate the evolution of irradiation-induced defects and the degradation of mechanical properties, as they collectively dictate the material's lifespan and ensure nuclear safety. Scanning transmission electron microscopy (STEM) based techniques have emerged as indispensable tools for irradiation-induced defect characterization, offering high spatial resolution imaging and chemical analysis, such as electron energy loss spectroscopy (EELS) and energy dispersive X-ray spectroscopy (EDXS). These techniques have been effectively used to obtain an atomic-scale view of the defect structure. Recent advances in electron microscopy, particularly in 4D-STEM, offer detailed insight into microstructural evolution by capturing full 2D diffraction patterns at every pixel position. Using high-speed direct electron detectors, this technology generates a four-dimensional dataset, overcoming the limitations of traditional STEM imaging.

36 MATERIALS SCIENCE↗

The degree of 5f electron localization in URu2Si2: electron energy-loss spectroscopy and spin-orbit sum rule analysis

We examine the degree of 5f electron localization in URu{sub 2}Si{sub 2} using spin-orbit sum rule analysis of the U N{sub 4,5} (4d {yields} 5f) edge. When compared to {alpha}-U metal, US, USe, and UTe, which have increasing localization of the 5f states, we find that the 5f states of URu{sub 2}Si{sub 2} are more localized, although not entirely. Spin-orbit analysis shows that intermediate coupling is the correct angular momentum coupling mechanism for URu{sub 2}Si{sub 2} when the 5f electron count is between 2.6 and 2.8. These results have direct ramifications for theoretical assessment of the hidden order state of URu{sub 2}Si{sub 2}, where the degree of localization of the 5f electrons and their contribution to the Fermi surface are critical.

36 MATERIALS SCIENCE↗

Structural, optical and dielectric properties of Ce{sup 3+}, Pr{sup 3+}, Nd{sup 3+} doped LaF{sub 3} hexagonal nanoparticles

Well dispersed, elongated and hexagonal LaF{sub 3}: Ce{sup 3+}, Pr{sup 3+}, Nd{sup 3+} nanocrystals have been synthesized by microwave assisted technique. X-ray diffraction (XRD) studies indicates the formation of nanocrystals with unit cell parameters a = b = 7.144 A{sup 0}, c = 7.281 A{sup 0}, (c/a = 1.019) and unit cell volume of 321.86 (A{sup 0}){sup 3} of average crystallite size 21 nm have been traced by from XRD analysis and it is close agreement with transmission electron microscope (TEM) analysis. Ultra-violet (UV) absorption spectrum shows an edge at 250 nm indicating presence of wide transparency window region between 200 nm-800 nm. Fundamental groups have been observed in the Fourier transformation infrared (FTIR) and FT-Raman spectra. The blue luminescent properties of the nanoparticles were investigated by excitation and emission spectra. Room temperature Electrical and dielectric properties were studied for the synthesized nanocrystals the values of conductivity & resistivity is found to be in the order of 10{sup −6} Scm{sup −1} and resistivity 10{sup 5} Ω cm. Low dielectric constant value was observed in the LaF{sub 3}: Ce{sup 3+}, Pr{sup 3+}, and Nd{sup 3+} nanocrystals at high frequency indicating its suitability for electro optics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural evolution and the variation of tensile behavior after aging heat treatment of precipitation hardened martensitic steel

The effects of aging temperature on the microstructural evolution and the tensile behavior of precipitation hardened martensitic steel were investigated. Microscopic analysis using transmission electron microscope (TEM) was combined with the microstructural analysis using the synchrotron X-ray diffraction (XRD) to characterize the microstructural evolution with aging temperature. Peak hardness was obtained by precipitation of the Ni{sub 3}Al ordered phase. After aging at temperature range from 420 to 590 °C, spherical Ni{sub 3}Al precipitates and ellipsoidal M{sub 23}C{sub 6} carbides were observed within laths and at lath boundaries, respectively. Strain hardening behavior was analyzed with Ludwik equation. It is observed that the plastic strain regimes can be divided into two different stages by a rapid increase in strain hardening followed by a comparatively lower increase. At the first strain hardening stage, the aged specimen exhibited higher strain hardening exponent than the as-quenched specimen, and the exponent in the aged specimen was not changed considerably with increasing aging temperature. It is revealed that the strain hardening exponents at the first and the second stages were associated with the Ni{sub 3}Al precipitates and the domain size representing the coherent scattering area, respectively. - Highlights: • All of aged specimen exhibited higher strain hardening exponent than the as-quenched specimen at the first stage. • The value of strain hardening exponent in the aged specimen was nearly constant with aging temperature. • Ni{sub 3}Al precipitation dominantly influenced to the increase of strain hardening exponent at the first strain hardening stage. • Domain size was associated with strain hardening exponent at the second strain hardening stage.

36 MATERIALS SCIENCE↗

Understanding the Electronic Structure of 4d Metal Complexes: From Molecular Spinors to L-Edge Spectra of a di-Ru Catalyst

L{sub 2,3}-edge X-ray absorption spectroscopy (XAS) has demonstrated unique capabilities for the analysis of the electronic structure of di-Ru complexes such as the blue dimer cis,cis-[Ru{sub 2}{sup III}O(H{sub 2}O){sub 2}(bpy){sub 4}]{sup 4+} water oxidation catalyst. Spectra of the blue dimer and the monomeric [Ru(NH{sub 3}){sub 6}]{sup 3+} model complex show considerably different splitting of the Ru L{sub 2,3} absorption edge, which reflects changes in the relative energies of the Ru 4d orbitals caused by hybridization with a bridging ligand and spin-orbit coupling effects. To aid the interpretation of spectroscopic data, we developed a new approach, which computes L{sub 2,3}-edges XAS spectra as dipole transitions between molecular spinors of 4d transition metal complexes. This allows for careful inclusion of the spin-orbit coupling effects and the hybridization of the Ru 4d and ligand orbitals. The obtained theoretical Ru L{sub 2,3}-edge spectra are in close agreement with experiment. Critically, existing single-electron methods (FEFF, FDMNES) broadly used to simulate XAS could not reproduce the experimental Ru L-edge spectra for the [Ru(NH{sub 3}){sub 6}]{sup 3+} model complex nor for the blue dimer, while charge transfer multiplet (CTM) calculations were not applicable due to the complexity and low symmetry of the blue dimer water oxidation catalyst. We demonstrated that L-edge spectroscopy is informative for analysis of bridging metal complexes. The developed computational approach enhances L-edge spectroscopy as a tool for analysis of the electronic structures of complexes, materials, catalysts, and reactive intermediates with 4d transition metals.

Alperovich, Igor↗

Binder characterisation of mortars used at different ages in the San Lorenzo church in Milan

The paper describes a study on the mortars of the basilica of San Lorenzo in Milan, which was carried out to support an archaeological study aimed at dating and documenting the construction techniques used throughout the centuries. The church, which was founded between the 4th and 5th century, at the end of the period when Milan was the capital of the Roman Empire, was subjected in time to extensions, collapses and reconstructions that lasted until the Renaissance period and even later on. Thanks to the good state of conservation, San Lorenzo church is a collection of materials and construction techniques throughout a period of more than a millennium. Mortars were investigated in order to compare the binders used for structural elements built in different historical ages. From an archaeological study, samples of mortars attributed to the late Roman period, the Middle Ages and the Renaissance were available. The binder of each sample was separated by the aggregates and it was characterised on the basis of X-ray diffraction analysis, thermogravimetric analysis and scanning electron microscopy. Constituents of the binder were identified and their origin is discussed in order to investigate if they could be attributed to the original composition of the binder or to possible alteration in time due to atmospheric pollution. Results show that, even though the binder is mainly based on magnesian lime, there are significant differences in the microstructure of the binding matrix used in mortars ascribed to the different historical periods. In the Roman period, in correspondence of the structural elements that required higher strength, also hydraulic cocciopesto mortars were detected. Gypsum was found in most samples, which was maybe added intentionally. - Highlights: • Binders of mortars of San Lorenzo church in Milan were investigated. • Roman, Middle Ages and Renaissance samples were studied by XRD, TG and SEM. • Magnesian-lime binders containing silico-aluminates were used in all periods. • Cocciopesto hydraulic mortars were used only in the Roman period. • Gypsum was found in most samples, which was maybe added intentionally.

36 MATERIALS SCIENCE↗

Synthesis of nanocrystalline forsterite (Mg{sub 2}SiO{sub 4}) powder by combined mechanical activation and thermal treatment

This study investigates the synthesis of single-phase nanocrystalline forsterite powder by mechanical activation with subsequent annealing. To produce forsterite powder, a mixture of talc and magnesium oxide powders was first milled by a planetary ball mill, and then annealed at 1000 and 1200 {sup o}C for 1 h. The synthesized powder was characterized by X-ray diffraction (XRD), simultaneous thermal analysis (STA), scanning electron microscopy (SEM), and atomic absorption spectrometry (AAS). The initial temperature of forsterite crystallization was reduced to about 825 {sup o}C after 20 h of mechanical activation. The forsterite powder synthesized by 5 h of mechanical activation with subsequent annealing at 1000 {sup o}C for 1 h had crystallites 40 nm in size. The particle size of this sample was less than 500 nm.

36 MATERIALS SCIENCE↗

Detection of coherent optical phonons in a thin bismuth film by ultrafast electron diffraction

Coherent dynamics of lattice oscillations in a ∼20-nm-thick film obtained by thermal sputtering of bismuth is studied using ultrashort electron bunches synchronised with femtosecond laser pulses irradiating the sample. The Fourier analysis of ultrafast electron diffraction (UED) data shows that the observed modulation of the signal is due to the ensemble of modes corresponding to optical phonons with frequencies of approximately 3, 6 and 9 THz. A conclusion is made that these peaks correspond to the manifestation of the bismuth A{sub 1g} mode (three-terahertz peak), as well as its first and second overtones, which is probably due to quantum confinement in a 20-nm Bi nanostructure. The possibility of a detailed study of the quantum-size effect in bismuth with the help of a transmission UED is analysed. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗