Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dominator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Redox potential in Typha-dominated tidal brackish marsh, PIE LTER, Plum Island Sound, MA, 2023

This dataset includes soil redox potential measurements collected at multiple depths within a tidal brackish wetland in the upper estuary of the Plum Island Ecosystems Long-Term Ecological Research site (PIE LTER), Plum Island Sound, Newbury, Massachusetts (MA). Measurements were taken to evaluate temporal variation in redox potential in relation to hydrological events at three replicate locations. Data were recorded every 5 minutes using a Campbell Scientific Volt116 connected to a CR6 datalogger with SWAP instrument redox probes (ORP-30-4-B) and reference electrodes. Measurements were made at the AmeriFlux site US-PLo at four soil depths (5, 10, 15, and 30 cm). The file redox_soiltemp_2023.csv contains temperature-corrected redox values and soil temperature following Silva-Machado et al. (2024). Metadata files redox_soiltemp_dd.csv and redox_soiltemp_2023_flmd.csv provide detailed descriptions of variables and site locations.

54 ENVIRONMENTAL SCIENCES↗

Porewater chemistry in Typha-dominated brackish tidal marsh, PIE LTER, Plum Island Sound, MA, July 2022–September 2024

This dataset contains profile measurements of porewater constituents taken on 3-4 days across the growing seasons in 2022, 2023, and 2024 in a tidal brackish marsh within the Plum Island Ecosystems Long Term Ecological Research site (PIE LTER), located in the Plum Island Sound, Massachusetts (MA). Measurements were taken to monitor changes in porewater chemistry induced by seasonal saltwater intrusion at the site. Samples were taken in two locations: one was close to the creek bank and the other in the marsh interior. Water was sampled from 2-5 depths between the surface to 50cm using a sipper consisting of a hollow stainless steel rod with an opening at the end similar to that described in (Berg & McGlathery, 2001). The rod was pushed into the sediment to the desired depth, typically every 10cm, and water samples were taken by syringe. Water was not obtained at all depths. Samples were preserved and analyzed in the lab. Metadata files Typha_porewater_sipper_dd.csv and Typha_porewater_sipper_flmd.csv contain detailed information on data variables, sampling and QA/QC methods, and site location.

54 ENVIRONMENTAL SCIENCES↗

Diurnal observations of basal stem CO2 efflux in three canopy dominant trees in the central Amazon

We explored mechanisms responsible for disturbance-induced shifts in carbon metabolism in forests north of Manaus, Brazil (S2º 38' 17", W60º 09' 25"), using data from a selective logging experiment (BIONTE). BIONTE (the BIOmass and NuTrient Experiment) selective logging treatments were initiated in the mid-1980s and comprised variable removal of commercial tree (not total) species basal area (T1 =32%, T2 = 42%, T3 = 69%), and control plots with no logging (T0). Raw data including tree base diameter (Db), CO2 concentration versus time inside a static stem chamber, and wood density were used to derive stem respiration rates (Rw), wood production rates (Pw), and wood carbon use efficiency (CUE). Changes in tree base diameter (Db; measured at 1.3 m height, or above the buttresses) was used to calculate wood production for individual trees (Pw). Wood density enabled calculation of stem growth rate in the same units as stem respiration (mmol C m-2 s-1). Four trees were randomly selected from five tree growth rate classes for each treatment block, for a total of 20 trees per treatment block, or 80 trees total from the BIONTE plots. Each of the 80 trees selected for the Rw study were outfitted with dendrometer bands (da Silva et al. 2002). Stem respiration was measured using the method described in Chambers et al. (2004). Briefly, an infra-red gas analyzer (LiCor 820) was operated as a closed dynamic chamber with a flow rate of 1.0 L min-1. Polyvinyl chloride (PVC) semi-cylindrical chambers (250–400 mL) were secured to the tree stem near the dendrometer bands using nylon straps. The measurement interval spanned 1–2 min, and the CO2 flux from the stem of each tree was quantified using the enclosed stem area and slope of the stem CO2 concentration versus time.

54 ENVIRONMENTAL SCIENCES↗

Solid-state ionics: The key to the discovery and domination of lithium batteries: some learnings from β-alumina and titanium disulfide

We report solid state ionics, the study of fast ion transport in solids, expanded explosively after the discovery of sodium ion transport in b-alumina 50 years ago and has revolutionized energy storage. Lithium ion batteries have come from a dream with titanium disulfide to enabling the communications revolution and are enabling renewable energy. Much can be learnt from these early studies, that will allow the attainment of a fossil-free society and a sustainable environment.

36 MATERIALS SCIENCE↗

Electron Cooling With Space-Charge Dominated Proton Beams at IOTA

We describe a new electron cooler being developed for 2.5 MeV protons at the Integrable Optics Test Accelerator (IOTA), which is a highly re-configurable storage ring at Fermilab. This system would enable the study of magnetized electron cooling in the presence of intense space-charge with transverse tune shifts approaching -0.5 as well as highly non-linear focusing optics in the IOTA ring. We present an overview of the design, simulations and hardware to be used for this project.

43 PARTICLE ACCELERATORS↗

Space charge dominated momentum spread and compensation strategies in the post-linac section of Proton Improvement Plan-II at Fermilab

The upcoming Proton Improvement Plan-II (PIP-II), designated for enhancements to the Fermilab accelerator complex, features a new 800 MeV superconducting linac and a Beam Transfer Line (BTL) to transport the beam to the existing Booster synchrotron. To mitigate the space charge tune shift associated with a high intensity accumulated beam, the low emittance linac beam is used to paint the ring phase space both transversely and longitudinally. To prevent losses caused by particles injected outside the rf separatrix while painting longitudinal phase space, the momentum spread of the incoming beam should not exceed 2.1 x 10^-4. Detailed simulations showed that due to space charge, the rms momentum spread increases to 4 x 10^-4 while it is transported in the BTL --about twice the allowable limit. In this paper, we outline a mitigation strategy involving a debuncher cavity. We discuss location, operating frequency, and gap voltage under both nominal and perturbed beam conditions, specifically accounting for momentum jitter. The impact of cavity misalignments is also assessed. The paper concludes by recommending an optimized configuration.

43 PARTICLE ACCELERATORS↗

Injection simulations of space charge dominated proton beams in IOTA

A 2.5 MeV proton injector is being constructed for the IOTA ring at Fermilab to study the interaction of nonlinear integrable optics (NIO) with high space charge beams. Space charge in the transport line from the RFQ to the injection location has a significant current dependent effect on the phase space. Simulation studies to support efficient injection of intense bunches into IOTA are presented, included schemes to inject directly into NIO lattices.

Accelerator Physics↗

Final Technical Report on STTR Project DE-FG02-06ER86281 Particle Tracking in Matter-Dominated Beam Lines (G4beamline)

This project has been for software development of the G4beamline [1] program, which is a particle-tracking simulation program based on the Geant4 toolkit [2], optimized for beam lines. This program can perform more realistic simulations than most alternatives, while being significantly easier to use by physicists. This project has fostered the general acceptance of G4beamline within the muon community, and has assisted in expanding its role outside that community. During this project, the G4beamline user community has grown from about a half-dozen users to more than 200 users around the world. This project also validated our business decision to keep G4beamline an open-source program, judging that an STTR project would provide more development resources than would marketing and selling the program. G4beamline is freely available to the physics community, and has been well validated against experiments and other codes within its domain. Muons, Inc. continues to support and develop the program, and a major part of the company's continued success and growth is directly related to our expertise in applying this program to interesting applications.

43 PARTICLE ACCELERATORS↗

Shear dominated failure in the 'hat' specimen from the 2013 Sandia Fracture Challenge.

The objective of this memo is to present a brief report of the progress achieved during FY2016 on the investigation of ductile failure in the 2013 Sandia Fracture Challenge specimen. It is a follow-up to the results of an experimental investigation presented in [1]. The experi- mental investigation was conducted with both the original steel A286 material used in the fracture challenge as well as with Al 7075-T651. The new results include further microscopy work for the steel A286 specimens, failure criterion veri cation for both materials and the implementation of a nite element model containing `material imperfections' to simulate the limit load in the response of the steel A286 specimens. Funding used to conduct the work presented here was provided by the ASC V&V program on validation of shear failure (Benjamin Reedlunn, PI) and from Sandia's LDRD program. This memo assumes that the reader is familiar with the material in [1].

36 MATERIALS SCIENCE↗

Shear dominated failure in the 'hat' specimen from the 2013 Sandia Fracture Challenge.

The objective of this memo is to present a brief report of the progress achieved during FY2016 on the investigation of ductile failure in the 2013 Sandia Fracture Challenge specimen. The experimental investigation was conducted with both the original steel A286 material used in the fracture challenge as well as with Al 7075-T651. The new results include further microscopy work for the steel A286 specimens, failure criterion verification for both materials and the implementation of a finite element model containing `material imperfections' to simulate the limit load in the response of the steel A286 specimens. Funding used to conduct the work presented here was provided by the ASC V&V program on validation of shear failure (Benjamin Reedlunn, PI) and from Sandia's LDRD program.

36 MATERIALS SCIENCE↗

Longitudinal Effects in Space Charge Dominated Cooled Bunched Beams [Slides]

Summary (in advance): Longitudinal space-charge effects manifest themselves in several fascinating ways: – Self-consistent stationary longitudinal distribution – Synchrotron modes shifts with beam current; These effects are easily accessible in low-energy electron-cooled ion beams; This talk is based on my research at the Indiana University Cyclotron Facility (IUCF) Cooler, but easily applicable to all other cooler rings.

43 PARTICLE ACCELERATORS↗

Diagnosing dominant controls on carbon exchanges in high altitude, western U.S. headwaters. Final report

An observational and modeling research approach was implemented in the East River CO, DOE Watershed Function SFA site. An eddy-covariance flux tower was emplaced located within the basin to observe movement of moisture and carbon. These new observations provided critical information for understanding subsurface controls on terrestrial- aquatic exchanges of carbon and water.

58 GEOSCIENCES↗

Automated Discovery of DOminaNt physics Informed Surrogates (ADDONIS) Framework for Improving Water Cycling Predictability

Focal Areas: The primary alignment of the proposed framework is with focal area 2, because it guides the construction of a hierarchy of predictive models generated from Statistical and AI/ ML techniques. There are connections to focal areas 1 and 3 because surrogates allow for coupled data assimilation techniques where the full model is too expensive (1) and the discovered balance laws can be used as an insightful analysis tool to validate the structure of models (3).

54 ENVIRONMENTAL SCIENCES↗

Experimental Assessment of Elastic Modulus vs. Relative Density for Stretch- and Bend-Dominated Lattices

This project was designed to study the possibility of using structural properties of lattices to replicate the material properties of certain hard to manufacture designs and use topology optimization to determine the lattice type and density required to mimic these properties. The integration of additively manufactured lattice structures with topology optimization highlights the need for well characterized mechanical properties and uncertainty analyses to insure these optimized structures respond as predicted. Stereolithographically printed octet and rhombic dodecahedron lattices were manufactured at 10%, 25% and 65% density by volume. As a separate task, yet integrated into this work, finite element analysis (FEA) was used to predict the printed lattice’s mechanical properties, which were then compared to our experimental results. After comparing FEA and experimentallymeasured elastic moduli, it was determined that the FEA provides highly reliable predictions for the modulus of these printed lattice structures. These lattices also exhibited greater tensile stiffness than that of the solid material demonstrating the flexibility that lattices provide to designing parts with designer structural properties. The accurate printing and reliable modeling of these lattices will enable topology optimization of complex parts from well-characterized rhombic dodecahedron and octet lattice structures of varying densities.

36 MATERIALS SCIENCE↗