DOE Bioenergy Center Special Issue: The Great Lakes Bioenergy Research Center (GLBRC)
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The 20th Crosscut Lean/Low-temperature Exhaust Emissions Reduction Simulation (CLEERS) Workshop sponsored by the US Department of Energy and organized by the Oak Ridge National Laboratory was held on October 3–5, 2017 in Ann Arbor, Michigan. The workshop covers a wide range of emissions control research topics in gasoline, diesel, and natural gas combustion with an emphasis on simulations of modeling of their complex processes. A sample of the topics includes novel catalyst formulations, aging and poisoning, biofuel impacts, selective catalytic reduction of NOx, ultra-low NOx emissions, and perspectives toward 2025 emissions compliance. There were a total of 162 attendees representing automotive manufacturers, component and software suppliers, national labs, universities, and government agencies. There were 39 oral presentations including four invited speakers, 23 posters presentations, and a panel discussion on emerging low-temperature aftertreatment needs and modeling requirements. Many of the presentations have been posted online at http://www.cleers.org/. Some presentations, received as manuscripts, have been selected for publication in Emission Control Science and Technology as special articles from the 2017 CLEERS Workshop.
Explore the source record for details and available documents.
Hydrogen vehicles (H2V), including H2 internal combustion engine, fuel cell and fuel cell plugin hybrid, could greatly reduce petroleum consumption and greenhouse gas (GHG) emissions in the transportation sector. The U.S. Department of Energy has adopted targets for vehicle component technologies to address key technical barriers towidespread commercialization of H2Vs. This study estimates the market acceptance of H2Vs and the resulting societal benefits and subsidy in 41 scenarios that reflect a wide range of progress in meeting these technical targets. Important results include: (1) H2Vs could reach 20e70% market shares by 2050, depending on progress in achieving the technical targets.With a basic hydrogen infrastructure (w5% hydrogen availability), the H2V market share is estimated to be 2e8%. Fuel cell and hydrogen costs are the most important factors affecting the long-term market shares of H2Vs. (2) Meeting all technical targets on time could result in about an 80% cut in petroleumuse and a 62% (or 72% with aggressive electricity de-carbonization) reduction in GHG in 2050. (3) The required hydrogen infrastructure subsidy is estimated to range from $22 to $47 billion and the vehicle subsidy from $4 to $17 billion. (4) Long-term H2V market shares, societal benefits and hydrogen subsidies appear to be highly robust against delay in one target, if all other targets are met on time. R&D diversification could provide insurance for greater societal benefits. (5) Both H2Vs and plug-in electric vehicles could exceed 50% market shares by 2050, if all targets are met on time. The overlapping technology, the fuel cell plug-in hybrid electric vehicle, appears attractive both in the short and long runs, but for different reasons.
Hydrogen fuels are being deployed around the world as an alternative to traditional petrol and battery technologies. As with all fuels, regulations, codes and standards are a necessary component of the safe deployment of hydrogen technologies. There has been a focused effort in the international hydrogen community to develop codes and standards based on strong scientific principles to accommodate the relatively rapid deployment of hydrogen-energy systems. The need for science-based codes and standards has revealed the need to advance our scientific understanding of hydrogen in engineering environments. Here, this brief review describes research and development activities with emphasis on scientific advances that have aided the advancement of hydrogen regulations, codes and standards for hydrogen technologies in four key areas: (1) the physics of high-pressure hydrogen releases (called hydrogen behavior); (2) quantitative risk assessment; (3) hydrogen compatibility of materials; and (4) hydrogen fuel quality.
We examine subsurface uranium (U) plumes at two U.S. Department of Energy sites that are located near large river systems and that are influenced by groundwater-river hydrologic interaction. Following surface excavation of contaminated materials, both sites were projected to naturally flush remnant uranium contamination to levels below regulatory limits (e.g., 30 µg/L or 0.126 µmol/L; U.S. EPA drinking water standard), with 10 years projected for the Hanford 300 Area (Columbia River) and 12 years for the Rifle site (Colorado River). The rate of observed uranium decrease was much lower than expected at both sites. While uncertainty remains, a comparison of current understanding suggests that the two sites have common, but also different mechanisms controlling plume persistence. At the Hanford 300 A, the persistent source is adsorbed U(VI) in the vadose zone that is released to the aquifer during spring water table excursions. The release of U(VI) from the vadose zone and its transport within the oxic, coarse-textured aquifer sediments is dominated by kinetically-limited surface complexation. Modeling implies that annual plume discharge volumes to the Columbia River are small (< one pore volume). At the Rifle site, slow oxidation of naturally reduced, contaminant U(IV) in the saturated zone and a continuous influx of U(VI) from natural, up-gradient sources influences plume persistence. Rate-limited mass transfer and surface complexation also control U(VI) migration velocity in the sub-oxic Rifle groundwater. Flux of U(VI) from the vadose zone at the Rifle site may be locally important, but it is not the dominant process that sustains the plume. A wide range in microbiologic functional diversity exists at both sites. Strains of Geobacter and other metal reducing bacteria are present at low natural abundance that are capable of enzymatic U(VI) reduction in localized zones of accumulated detrital organic carbon or after organic carbon amendment. Major differences between the sites include the geochemical nature of residual, contaminant U; the rates of current kinetic processes (both biotic and abiotic) influencing U(VI) solid-liquid distribution; the presence of detrital organic matter and the resulting spatial heterogeneity in microbially-driven redox properties; and the magnitude of groundwater hydrologic dynamics controlled by river-stage fluctuations, geologic structures, and aquifer hydraulic properties. The comparative analysis of these sites provides important guidance to the characterization, understanding, modeling, and remediation of groundwater contaminant plumes influenced by surface water interaction that are common world-wide.
Not Available
Carbonation can be a major aging process during disposal of alkaline cementitious waste forms and can impact constituent leaching by changes in material alkalinity, pore structure, and controlling mineral phases. The effect of carbonation on the leaching of major and trace constituents from Cast Stone, a cementitious waste form developed to treat high salt content low activity waste, was studied through a combination of leaching experiments and reactive transport simulations. Diffusive transport of constituents in the waste form was evaluated using reactive transport modeling of diffusion-controlled leaching test results and a geochemical speciation model derived from pH-dependent leaching. Comparisons between Cast Stone materials aged under nitrogen, air, and 2% carbon dioxide in nitrogen showed that carbonation impacts solubility, physical retention and observed diffusivity of major and trace constituents. Carbonation under 2% CO 2 decreased the diffusion-controlled leaching of chromium by two orders of magnitude. Finally, modeling results suggest that carbonation may also decrease solubility of technetium while changes to microstructure by carbonation increases effective diffusivity of constituents in Cast Stone.
Not Available
This study provides an overview of the coupled high-resolution Version 1 of the Energy Exascale Earth System Model (E3SMv1) and documents the characteristics of a 50-year-long high-resolution control simulation with time-invariant 1950 forcings following the HighResMIP protocol. In terms of global root-mean-squared error metrics, this high-resolution simulation is generally superior to results from the low-resolution configuration of E3SMv1 (due to resolution, tuning changes, and possibly initialization procedure) and compares favorably to models in the CMIP5 ensemble. Ocean and sea ice simulation is particularly improved, due to better resolution of bathymetry, the ability to capture more variability and extremes in winds and currents, and the ability to resolve mesoscale ocean eddies. The largest improvement in this regard is an ice-free Labrador Sea, which is a major problem at low resolution. Interestingly, several features found to improve with resolution in previous studies are insensitive to resolution or even degrade in E3SMv1. Most notable in this regard are warm bias and associated stratocumulus deficiency in eastern subtropical oceans and lack of improvement in El Niño. Another major finding of this study is that resolution increase had negligible impact on climate sensitivity (measured by net feedback determined through uniform +4K prescribed sea surface temperature increase) and aerosol sensitivity. Cloud response to resolution increase consisted of very minor decrease at all levels. Large-scale patterns of precipitation bias were also relatively unaffected by grid spacing.
Abstract The processes responsible for freshwater flux from the Antarctic Ice Sheet (AIS), ice‐shelf basal melting and iceberg calving, are generally poorly represented in current Earth System Models (ESMs). Here we document the cryosphere configuration of the U.S. Department of Energy's Energy Exascale Earth System Model (E3SM) v1.2. This includes simulating Antarctic ice‐shelf basal melting, which has been implemented through simulating the ocean circulation within static Antarctic ice‐shelf cavities, allowing for the ability to calculate ice‐shelf basal melt rates from the associated heat and freshwater fluxes. In addition, we added the capability to prescribe forcing from iceberg melt, allowing for realistic representation of the other dominant mass loss process from the AIS. In standard resolution simulations (using a noneddying ocean) under preindustrial climate forcing, we find high sensitivity of modeled ocean/ice shelf interactions to the ocean state, which can result in a transition to a high basal melt regime under the Filchner‐Ronne Ice Shelf (FRIS), presenting a significant challenge to representing the ocean/ice shelf system in a coupled ESM. We show that inclusion of a spatially dependent parameterization of eddy‐induced transport reduces biases in water mass properties on the Antarctic continental shelf. With these improvements, E3SM produces realistic ice‐shelf basal melt rates across the continent that are generally within the range inferred from observations. The accurate representation of ice‐shelf basal melting within a coupled ESM is an important step toward reducing uncertainties in projections of the Antarctic response to climate change and Antarctica's contribution to global sea‐level rise.
Abstract The dynamical core of the Department of Energy global climate model is used to understand the role of non‐hydrostatic dynamics in the simulation of dry and moist baroclinic waves. To reduce computational cost, the Diabatic Acceleration and REscaling approach is adopted. Scale analysis and numerical simulations suggest that the model solution is not distorted by the change of spherical metric terms due to the change of Earth radius, neither are the inter‐scale interactions strongly altered as indicated by the analysis of spectral flux. Compared with hydrostatic simulations, the onset of baroclinic instability is delayed under non‐hydrostatic dynamics as the associated weaker vertical motions tend to increase the critical wavelength and narrow the range of waves that can be baroclinically unstable. During the development of baroclinic waves, non‐hydrostatic dynamics tends to induce vertical motions in the upper troposphere, accelerating the eastward propagation of upper‐level ridges through their impact on local vorticity tendency. These processes reduce the westward tilt of the vertical ridge axes and suppress the conversion of mean flow available potential energy to eddy kinetic energy, leading to weaker baroclinic eddies than in hydrostatic simulations. The contrasts between hydrostatic and non‐hydrostatic settings hold in supplemental experiments that vary the background flow Rossby number, the amount of water vapor content and vertical resolution. We also find that mesoscale and smaller‐scale activities can be considerably under‐represented when the vertical resolution is limited to that typically used in global climate models.
This study assesses a 40-day 3.25-km global simulation of the Simple Cloud-Resolving E3SM Model (SCREAMv0) using high-resolution ground-based observations from the Atmospheric Radiation Measurement (ARM) Green Ocean Amazon (GoAmazon) field campaign. SCREAMv0 reasonably captures the diurnal timing of boundary layer clouds yet underestimates the boundary layer cloud fraction and mid-level congestus. SCREAMv0 well replicates the precipitation diurnal cycle, however it exhibits biases in the precipitation cluster size distribution compared to scanning radar observations. Specifically, SCREAMv0 overproduces clusters smaller than 128 km, and does not form enough large clusters. Such biases suggest an inhibition of convective upscale growth, preventing isolated deep convective clusters from evolving into larger mesoscale systems. This model bias is partially attributed to the misrepresentation of land-atmosphere coupling. This study highlights the potential use of high-resolution ground-based observations to diagnose convective processes in global storm resolving model simulations, identify key model deficiencies, and guide future process-oriented model sensitivity tests and detailed analyses.
The vertical distribution of biomass burning aerosol (BBA) is important in regulating their impacts on weather and climate. The plume-rise process affects the injection height of BBA and interacts with the air parcel lifting and cloud processes. However, these processes are not represented in most global climate models. In this study, we replaced the fixed vertical profiles of monthly BBA emissions in the Department of Energy's Energy Exascale Earth System Model version 1 (E3SMv1) with an interactive fire plume-rise model. The vertical distribution of BBA emissions was calculated as a function of ambient thermodynamic conditions from the host E3SMv1, with distributions of fire sizes and sensible heat fluxes derived from the observations. The maximum fire radiative power (FRP) technique was used to determine the fire size. Scaling-FRP technique is used to calculate the wildfire heat release. Daily BBA emission, superimposed with a fire diurnal cycle retrieved from the satellite observation, was included in model simulations. The model shows improved agreement with satellite retrievals and in situ measurement during the National Oceanic and Atmospheric Administration Wildfire Experiment for Cloud chemistry, Aerosol absorption, and Nitrogen campaign. The model-observation comparison demonstrates the importance of the plume-rise model and fire diurnal cycle assumption in determining the BBA fields. We also find that E3SMv1 with new features produces a larger carbonaceous aerosol burden, leading to 0.13 W m –2 warming at the top of atmosphere compared to the default E3SMv1. This highlights the importance of accurately representing the BBA injection height and indicates a no-linear nature in the BBA-induced radiative effect.
Accurately simulating convective processes in complex terrain remains a critical challenge for global storm-resolving models (GSRMs). This study systematically evaluates moist convective biases in the Regionally Refined Mesh configuration of the U.S. Department of Energy Simple Cloud-Resolving E3SM Atmosphere Model (RRM-SCREAM) using comprehensive observations and large-eddy simulations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) campaign in the mountainous area of central Argentina. Comparisons of simulations with high-resolution observations and reanalysis data indicate that RRM-SCREAM effectively captures large-scale meteorological patterns, including regional atmospheric gradients and diurnal variability. However, RRM-SCREAM disproportionately produces smaller precipitation clusters referred to as “popcorn convection,” and exaggerated rainfall intensities compared to observations and reference models. Detailed examination of a representative orographic shallow-to-deep convective transition case shows that RRM-SCREAM delays initial shallow convection growth due to lower-tropospheric dryness and sustained convective inhibition, but once triggered, deep convection becomes overly vigorous with excessively strong vertical velocities and elevated cloud ice content, linked to a thermodynamic structure characterized by suppressed low-level moistening and excessive upper-level moisture retention. Our results highlight specific deficiencies in the model representation of convective vertical velocity, cloud microphysical processes, and convective precipitation organization within RRM-SCREAM. Addressing these biases is essential for improving the predictions of convective clouds and precipitation in the global high-resolution atmospheric models.