Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

What Controls Crystal Diversity and Microphysical Variability in Cirrus Clouds?

Abstract Variability of ice microphysical properties like crystal size and density in cirrus clouds is important for climate through its impact on radiative forcing, but challenging to represent in models. For the first time, recent laboratory experiments of particle growth (tied to crystal morphology via deposition density) are combined with a state‐of‐the‐art Lagrangian particle‐based microphysics model in large‐eddy simulations to examine sources of microphysical variability in cirrus. Simulated particle size distributions compare well against balloon‐borne observations. Overall, microphysical variability is dominated by variability in the particles' thermodynamic histories. However, diversity in crystal morphology notably increases spatial variability of mean particle size and density, especially at mid‐levels in the cloud. Little correlation between instantaneous crystal properties and supersaturation occurs even though the modeled particle morphology is directly tied to supersaturation based on laboratory measurements. Thus, the individual thermodynamic paths of each particle, not the instantaneous conditions, control the evolution of particle properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

All-atom molecular dynamics simulations of weak polyionic brushes: influence of charge density on the properties of polyelectrolyte chains, brush-supported counterions, and water molecules

All atom molecular dynamics (MD) simulations of planar Na+-counterion-neutralized polyacrylic acid (PAA) brushes are performed for varying degrees of ionization (and thereby varying charge density) and varying grafting density. Variation in the PE charge density (or degree of ionization) and grafting density leads to massive changes of the properties of the PE molecules (quantified by the changes in the height and the mobility of the PE brushes) as well as the local arrangement and distribution of the brush-supported counterions and water molecules within the brushes. The effect on the counterions is manifested by the corresponding variation of the counterion mobility, counterion concentration, extent of counterion binding to the charged site of the PE brushes, water-in-salt-like structure formation, and counterion-water–oxygen radial distribution function within the PE brushes. On the other hand, the effect on water molecules is manifested by the corresponding variation of water–oxygen–water–oxygen RDF, local water density, water–water and water–PE functional group hydrogen bond networks, static dielectric constant of water molecules, orientational tetrahedral order parameter, and water mobility. Enforcing such varying degree of ionization of weak polyelectrolytes is possible by changing the pH of the surrounding medium. Thus, our results provide insights into the changes in microstructure (at the atomistic level) of weak polyionic brushes at varying pH. Finally, we anticipate that this knowledge will prove to be vital for the efficient design of several nano-scale systems employing PE brushes such as nanomechanical gates, current rectifiers, etc.

42 ENGINEERING↗
DOE OSTI2022

Inferring the temperature profile of the radiative shock in the COAX experiment with shock radiography, Dante, and spectral temperature diagnostics

Predicting and modeling the behavior of experiments with radiation waves propagating through low-density foams require a detailed quantification of the numerous uncertainties present. In regimes where a prominent radiative shock is produced, key dynamical features include the shock position, temperature, and curvature and the spatial distribution and temperature of the corresponding supersonic radiation wave. The COAX experimental platform is designed to constrain numerical models of such a radiative shock propagating through a low-density foam by employing radiography for spatial and shock information, Dante for characterizing the x-ray flux from the indirectly driven target, and a novel spectral diagnostic designed to probe the temperature profile of the wave. In this work, we model COAX with parameterized 2D simulations and a Hohlraum-laser modeling package to study uncertainties in diagnosing the experiment. The inferred temperature profile of the COAX radiation transport experiments has been shown to differ from simulations more than expected from drive uncertainties that have been constrained by simultaneous soft x-ray flux and radiography measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Strength distributions of laminated FeNi-based metal amorphous nanocomposite ribbons

Metal Amorphous Nanocomposite (MANC) materials offer low losses at high magnetic switching frequency, enabling high power density motors with increased rotational speed. While MANCs have high strength, they are brittle. The use of motor components such as a rotor consisting of brittle material presents a reliability concern. Here, a promising MANC alloy is subjected to tensile tests and failure is observed with high-speed photography. A method is developed to prepare tensile specimens of laminated MANC and epoxy layers, simulating the stacking of an epoxy-impregnated tape-wound core. Tensile tests are conducted for single layer ribbon and for five- and ten-layer stacks of laminated material with thin layers of thermosetting epoxy. Failure distributions are shown to have increasing Weibull modulus with increasing layer count. The composite MANC material system is modeled using chain-of-bundles models. Using a k-failure model, we show that single ribbon strength distribution data can be used to predict well the failure distribution of laminated stacks. The agreement occurs when the assumed ineffective length, over which load is recovered in a failed layer, is comparable to the observed interlaminar separation length.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Area-Preserving Mapping of 3D Carotid Ultrasound Images Using Density-Equalizing Reference Map

Carotid atherosclerosis is a focal disease at the bifurcations of the carotid artery. To quantitatively monitor the local changes in the vessel-wall-plus-plaque thickness (VWT) and compare the VWT distributions for different patients or for the same patients at different ultrasound scanning sessions, a mapping technique is required to adjust for the geometric variability of different carotid artery models. In this work, we propose a novel method called density-equalizing reference map (DERM) for mapping 3D carotid surfaces to a standardized 2D carotid template, with an emphasis on preserving the local geometry of the carotid surface by minimizing the local area distortion. The initial map was generated by a previously described arc-length scaling (ALS) mapping method, which projects a 3D carotid surface onto a 2D non-convex L-shaped domain. A smooth and area-preserving flattened map was subsequently constructed by deforming the ALS map using the proposed algorithm that combines the density-equalizing map and the reference map techniques. This combination allows, for the first time, one-to-one mapping from a 3D surface to a standardized non-convex planar domain in an area-preserving manner. Evaluations using 20 carotid surface models show that the proposed method reduced the area distortion of the flattening maps by over 80% as compared to the ALS mapping method.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Neck Rupture and Scission Neutrons in Nuclear Fission

Just before a nucleus undergoes fission, a neck is formed between the emerging fission fragments. It is widely accepted that this neck undergoes a rather violent rupture, despite the absence of unambiguous experimental evidence. The main difficulty in addressing the neck rupture and saddle-to-scission stages of fission is that both are highly nonequilibrium processes. Here, we present the first fully microscopic characterization of the scission mechanism, along with the spectrum and the spatial distribution of scission neutrons (SNs), and some upper limit estimates for the emission of charged particles. The spectrum of SNs has a distinct angular distribution, with neutrons emitted in roughly equal numbers in the equatorial plane and along the fission axis. They carry an average energy around 3±0.5 MeV for the fission of 236 U, 240 Pu, and 252 Cf, and a maximum of 16–18 MeV. We estimate a conservative lower bound of 9%–14% of the total emitted neutrons are produced at scission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Silicon nanocluster anion-argon cation recombination via hybrid continuum-molecular dynamics calculations

Prediction of the charge distribution on particles in an aerosol is critical not only in electrical mobility based characterization methods, but also in understanding the role that charging plays in particle growth in gas phase synthesis reactors. The latter is particularly important in non-thermal plasma synthesis reactors, wherein nanoclusters form and grow from vapor phase precursors in a high electron and high ion density environment. In plasmas, because free electrons are much less massive and much more mobile than positive gas ions, nanocluster charge distributions are biased negative. Furthermore, neutral or even positively charged nanoclusters may exist, depending on the rate of nanocluster-gas ion recombination, and nanocluster-nanocluster collisions may greatly contribute to nanocluster growth if not Coulombically suppressed.

42 ENGINEERING↗
DOE OSTI2020

Characterization of groove density variation of VLS gratings with ALS XROL LTP-II in different operation modes

The long trace profiler, LTP-II, available at the Advanced Light Source (ALS) X-ray Optics Laboratory (XROL), was recently upgraded by replacing a multimode diode laser light source with a single-mode, wavelength-stabilized, fibercoupled diode laser system. The upgrade enables us to reliably characterize the lateral variation of groove density of variable-line-spacing (VLS) x-ray diffraction gratings. Here, we discuss the LTP-II performance with an example of measurements with a VLS grating with the groove density at the grating center of 300 lines/mm. For the measurements, we use the LTP-II in two different operation arrangements, the single Gaussian beam and the pencil beam interferometer arrangements. For each operation arrangement, we apply two data processing algorithms: with calculating the centroid position and with determining the position of a characteristic features of the detected beam intensity distributions. Additionally, we discuss the observed strong correlation between the LTP-II modes of operation and the resulted (extracted) groove density variations. We also speculate on possible origin of the correlation.

42 ENGINEERING↗
DOE OSTI2020

Experimental study of vorticity-strain interactions in turbulent premixed counterflow flames

Here, the effects of heat release on interactions between vorticity (ω) and strain rate (s) in turbulent premixed CH 4 /O 2 /N 2 counterflow flames are investigated using simultaneous OH laser-induced fluorescence (LIF) and tomographic particle image velocimetry (TPIV) measurements. A comparison between the flames and a corresponding turbulent non-reacting variable density N 2 -vs-products counterflow reveals the impact of heat release on vorticity-strain rate alignment statistics. Vorticity and strain rate statistics in the flames and non-reacting flow are conditioned on distance from the local flame front and gas mixing layer interface (GMLI) contours, respectively. The magnitude, alignment, and spatial distribution of the vorticity and principal strain rates (s 1 , s 2 , s 3 ) are rather different when heat release is present. Density variations without heat release enhance the ω-s 2 alignment while significantly reducing the ω-s 3 alignment and modestly reducing the ω-s 1 alignment. In contrast, heat release at the flame front further reduces the ω-s 1 alignment but increases the ω-s 3 alignment and suppresses the preferential ω-s 2 alignment. Furthermore, increasing turbulence diminishes the effect of heat release on this preferential alignment. In regions with the largest vorticities, both the reacting and non-reacting counterflows show an increase in the probability of ω-s 2 alignment. All counterflow cases have a net positive vortex-stretching contribution to the enstrophy production with a peak production rate at the flame front or GMLI, but the peak values depend on the density variation, heat release, and turbulence level. Elucidation of the complex interplay between these factors contributes to the understanding of the dynamics of turbulence-flame interactions.

42 ENGINEERING↗
DOE OSTI2022

Inferences of hot electron preheat and its spatial distribution in OMEGA direct drive implosions

Hot electrons generated from laser plasma instabilities degrade performance of direct drive implosions by preheating the deuterium and tritium (DT) fuel resulting in early decompression and lower areal densities at stagnation. A technique to quantify the hot electron preheat of the dense DT fuel and connect it to the degradation in areal density is described in detail. Hot electrons are measured primarily from the hard x-rays they emit as they slow down in the target. The DT preheat is inferred from a comparison of the hard x-ray signals between a DT-layered implosion and its mass equivalent ablator only implosion. The preheat energy spatial distribution within the imploding shell is inferred from experiments using high Z payloads of varying thicknesses. It is found that the electrons deposit their energy uniformly throughout the shell material. For typical direct-drive OMEGA implosions driven with an overlapped intensity of ∼9·1014 W/cm2, approximately ∼0.02%–0.03% of the laser energy is converted into preheat of the stagnated fuel which corresponds to areal density degradations of 10%–20%. The degradations in areal density explain some of the observed discrepancies between the simulated and measured areal densities.

Christopherson, A. R. (ORCID:000000033578635X)↗
DOE OSTI2020

Upper boundaries of active galactic nucleus regions in optical diagnostic diagrams

The distribution of galaxies in optical diagnostic diagrams can provide information about their physical parameters when compared with ionization models under proper assumptions. By using a sample of central emitting regions from the Mapping Nearby Galaxies at Apache Point Observatory survey (MaNGA), we find evidence of the existence of upper boundaries for narrow-line regions (NLRs) of active galactic nuclei (AGNs) in optical Baldwin, Phillips & Terlevich (BPT) diagrams, especially in diagrams involving [Sii]λλ6716, 6731/Hα. Photoionization models can reproduce the boundaries well, as a consequence of the decrease of [Sii]λλ6716, 6731/Hα and [Oiii]λ5007/Hβ ratios at very high metallicity. Whilst the exact location of the upper boundary in the [Sii] BPT diagram depends only weakly on the electron density of the ionized cloud and the secondary nitrogen prescription, its dependence on the shapes of the input spectral energy distributions (SEDs) is much stronger. This allows us to constrain the power-law index of the AGN SED between 1 Ryd and ~100 Ryd to be less than or equal to -1.40 ± 0.05. The coverage of photoionization models in the [Nii] BPT diagram has a stronger dependence on the electron density and the secondary nitrogen prescription. With the density constrained by the [Sii] doublet ratio and the input SED constrained by the [Sii] BPT diagram, we find that the extent of the data in the [Nii] BPT diagram favours those prescriptions with high N/O ratios. Furthermore, although shock-ionized clouds can produce line ratios similar to those from photoionization, the resulting shapes of the upper boundaries, if they exist, would likely be different from those of photoionizing origin.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Construction of wave dark matter halos: Numerical algorithm and analytical constraints

Here we present a wave generalization of the classic Schwarzschild method for constructing self-consistent halos—such a halo consists of a suitable superposition of waves instead of particle orbits, chosen to yield a desired mean density profile. As an illustration, the method is applied to spherically symmetric halos. We derive an analytic relation between the particle distribution function and the wave superposition amplitudes and show how it simplifies in the high-energy (WKB) limit. We verify the stability of such constructed halos by numerically evolving the Schrödinger-Poisson system. The algorithm provides an efficient and accurate way to simulate the time-dependent halo substructures from wave interference. We use this method to construct halos with a variety of density profiles, all of which have a core from the ground-state wave function, though the core-halo relation need not be the standard one.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Leaf turgor loss point shapes local and regional distributions of evergreen but not deciduous tropical trees

Summary The effects of climate change on tropical forests will depend on how diverse tropical tree species respond to drought. Current distributions of evergreen and deciduous tree species across local and regional moisture gradients reflect their ability to tolerate drought stress, and might be explained by functional traits. We measured leaf water potential at turgor loss (i.e. ‘wilting point’; π tlp ), wood density (WD) and leaf mass per area (LMA) on 50 of the most abundant tree species in central Panama. We then tested their ability to explain distributions of evergreen and deciduous species within a 50 ha plot on Barro Colorado Island and across a 70 km rainfall gradient spanning the Isthmus of Panama. Among evergreen trees, species with lower π tlp were associated with drier habitats, with π tlp explaining 28% and 32% of habitat association on local and regional scales, respectively, greatly exceeding the predictive power of WD and LMA. In contrast, π tlp did not predict habitat associations among deciduous species. Across spatial scales, π tlp is a useful indicator of habitat preference for tropical tree species that retain their leaves during periods of water stress, and holds the potential to predict vegetation responses to climate change.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Towards isolated attosecond electron bunches using ultrashort-pulse laser-solid interactions

We investigate MeV-level attosecond electron bunches from ultrashort-pulse laser-solid interactions through similarities between experimental and simulated electron energy spectra. We show measurements of the bunch duration and temporal structure from particle-in-cell simulations. The experimental observation of such bunches favors specular reflection direction when focusing the laser pulse onto a subwavelength boundary of thick overdense plasmas at grazing incidence. Particle-in-cell simulation further reveals that the attosecond duration is a result of ultra-thin (~tenth of a micron) gaps of zero electromagnetic energy density in the modulated reflected radiation, while the bunching (locally peaked electron concentration) comes from the highly-directional electron angular distribution acquired by the electrons in a grazing incidence setup. To isolate a single electron bunch, we perform simulations using 1-cycle laser pulses and analyze the effect of carrier-envelop phase with particle tracking. The duration of the electron bunch can be further decreased by increasing the laser intensity and the focal spot size, while its direction can be changed by tuning the preplasma density gradient.

High-harmonic generation↗
DOE OSTI2023

Effects of turbulent diffusion and back-reaction on the dust distribution around two resonant planets

In evolved and dusty circumstellar discs, two planets with masses comparable to Jupiter and Saturn that migrate outwards while maintaining an orbital resonance can produce distinctive features in the dust distribution. Dust accumulates at the outer edge of the common gas gap, which behaves as a dust trap, where the local dust concentration is significantly enhanced by the planets’ outward motion. Concurrently, an expanding cavity forms in the dust distribution inside the planets’ orbits, because dust does not filter through the common gaseous gap and grain depletion in the region continues via inward drifting. There is no cavity in the gas distribution because gas can filter through the gap, although ongoing gas accretion on the planets can reduce the gas density in the inner disc. Such behaviour was demonstrated by means of simulations neglecting the effects of dust diffusion due to turbulence and of dust backreaction on the gas. Both effects may alter the formation of the dust peak at the gap outer edge and of the inner dust cavity, by letting grains filter through the dust trap. We performed high-resolution hydrodynamical simulations of the coupled evolution of gas and dust species, the latter treated as pressureless fluids, in the presence of two giant planets. We show that diffusion and backreaction can change some morphological aspects of the dust distribution but do not alter some main features, such as the outer peak and the expanding inner cavity. Furthermore, these findings are confirmed for different parametrizations of gas viscosity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Additionally, tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, 13 C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Minimum entropy filtering for a single output non-Gaussian stochastic system using state transformation

This paper presents a novel filter design for the single-output stochastic non-linear systems subjected to non-Gaussian noises and the proposed assumptions. Based on a state transformation, the unmeasurable states of the systems can be estimated where non-linear terms in the systems have been eliminated. It has been shown that the estimation error is linearly dynamical regarding to the presented vector-valued filter gain which can be optimised by minimising the entropy-based performance criterion. In addition, the convergence of the presented algorithm is analysed in mean-square sense and a numerical example is given to verify the effectiveness of the presented filtering algorithm. Meanwhile, the extended Kalman filter, unscented particle filter and minimum entropy filter are given for the comparisons of the filtering performance. Following the presented framework, some extensions of the presented filtering algorithm are discussed to indicate the flexibility of the filter design. The contribution of this paper can be summarised as establishing a novel minimum entropy filtering framework which consists of model transformation, entropy optimisation and convergence analysis.

42 ENGINEERING↗
DOE OSTI2023

A deep learning model for automatic analysis of cavities in irradiated materials

Transmission electron microscopy (TEM) is a commonly used technique in materials science for defect investigation. Quantitative analysis of defects is important for understanding the properties of a material, but manual analysis of TEM micrographs can be time-consuming and prone to error, especially when the defects have irregular shapes rather than spherical shapes. Many existing methods or deep learning models do not handle a wide range of sizes for the same object type within a single image. In this work, we present a framework that enables users to train an instance segmentation model called Mask R- CNN on any microstructure dataset, perform multi-detection on the same image at different scales, and obtain properties (e.g., size, area) of the objects based on the desired shape (e.g., circle, ellipse, rectangle). Additionally, we have developed a parallel detection module that uses multiple GPUs to increase the efficiency of the object detection process. We demonstrate the capabilities of our framework using a set of TEM images of cavities with different shapes, size distributions, and background contrasts. Finally, we show that the performance of our model in terms of density, size, and swelling of the cavities is comparable to the human average and that our model achieves the highest recall value compared to existing methods due to the use of image multi-rescaling.

36 MATERIALS SCIENCE↗