SEARCH · Engineering Papers

Results for “data quality analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Stratospheric temperatures during AASE - Results from STRATAN

Comparisons of temperatures from the research analysis STRATAN to radiosonde data, Meteorological Measurement System (MMS) data, and the National Meteorological Center (NMC) analyses are presented for the Airborne Arctic Stratospheric Expedition (AASE). The STRATAN analyses show consistent quality throughout AASE. The comparisons to MMS show that STRATAN more accurately represented low temperatures than NMC. This, coupled with forecast quality, show that STRATAN temperature fields are a valuable tool for diagnosing and forecasting polar stratospheric clouds.

Rood, Richard B.↗

NASA NTRS1993

Attitude Determination by Using Horizon and Sun Sensors

The Pointing and Alignment Workstation (PAWS) developed by Teledyne Brown Engineering (TBE) has successfully supported the first and second Atmospheric Laboratory for Applications and Science (ATLAS 1, 2) spacelab missions for NASA. The primary PAWS objective was to provide realtime pointing information to instruments whose line of-sight is dependent on Shuttle attitude and to study/quantify the causes and effects of Shuttle and payload pointing errors. In addition to Shuttle IMU attitude information, PAWS used atmospheric science sensors data to determine the spacecraft attitude. PAWS successfully achieved these goals by acquiring and processing data during the ATLAS 1, 2 mission. This paper presents the attitude determination algorithm real time processing, and results of post mission analysis. The findings of this study include the quality of the horizon sensor and IMU measurements as well as accuracy of attitude processor algorithm.

Huang, Allen K. H.↗

NASA NTRS1997

Interferometric Images of the Sunyaev - Zel'dovich Effect in Galaxy Clusters from z = 0.15 to z = 0.83

We describe the current results of a sensitive interferometric imaging survey of the Sunyaev-Zel'dovich effect towards distant galaxy clusters. Images of the Sunyaev-Zel'dovich effect -- a minute distortion imprinted on the cosmic microwave background radiation by scattering within the hot gaseous envelopes of galaxy clusters -- are obtained using 30 GHz receivers at the OVRO and BIMA millimeter interferometers; with these highly sensitive receivers and the interferometric method's natural suppression of many systematic errors, we have obtained high quality images of 18 clusters with redshifts ranging from Z = 0.l5 to 0.83, with a sensitivity of 25 microkelvin. When combined with x-ray imaging and spectroscopic data, analysis of these S-Z images provides an independent measurement of the cosmic distance scale Results from a joint analysis of the X-ray and S-Z data will be presented, and we will describe the constraints that S-Z effect measurements can ultimately place on Ho and Omega.

Joy, Marshall K.↗

NASA NTRS2008

Data Visualization and Analysis for Climate Studies using NASA Giovanni Online System

With many global earth observation systems and missions focused on climate systems and the associated large volumes of observational data available for exploring and explaining how climate is changing and why, there is an urgent need for climate services. Giovanni, the NASA GES DISC Interactive Online Visualization ANd ANalysis Infrastructure, is a simple to use yet powerful tool for analysing these data for research on global warming and climate change, as well as for applications to weather. air quality, agriculture, and water resources,

Rui, Hualan↗

NASA NTRS2018

Real-Time Parameter Estimation for Flexible Aircraft

A method for estimating aeroelastic stability and control derivatives for flexible aircraft is developed and demonstrated using flight test data for the X-56A subscale demonstrator. The method uses the equation-error approach with frequency-domain data, and can be applied post-flight or in real time during flight. The non-dimensional aeroelastic forces and moments and the explanatory variables (including generalized displacement, rate, and acceleration states for the vibration modes) are estimated using a finite element model and onboard sensor measurements in both a least squares and Kalman filtering framework. The data are then transformed into the frequency domain for parameter estimation using equation error. This method can result in a more efficient analysis than with other iterative methods, and can leverage existing statistical tools for model structure determination, data collinearity detection, combining multiple maneuvers or prior information, and others to improve model quality.

Grauer, Jared A.↗

NASA NTRS2018

An Overall Assessment of JPSS-2 VIIRS Radiometric Performance Based on Pre-Launch Testing

The Visible Infrared Imaging Radiometer Suite (VIIRS) on-board the second Joint Polar Satellite System (JPSS) completed its sensor level testing in February 2018. The JPSS-2 (J2) mission is scheduled to launch in 2022 and will be very similar to its two predecessor missions, the Suomi National Polar-orbiting Partnership (SNPP) mission, launched on 28 October 2011 and JPSS-1 (renamed NOAA-20) launched on 18 November 2017. VIIRS instrument has 22 spectral bands covering the spectrum between 0.4 and 12.6 μm: 14 reflective solar bands (RSB), 7 thermal emissive bands (TEB) and one day-night band (DNB). It is a cross-track scanning radiometer capable of providing global measurements through observations at two spatial resolutions, 375 m and 750 m at nadir for the imaging bands and moderate bands, respectively. This paper will provide an overview of J2 VIIRS characterization methodologies and calibration performance during the pre-launch testing phases performed by the National Aeronautics and Space Administration (NASA) VIIRS Characterization Support Team (VCST) to evaluate the at-launch baseline radiometric performance and generate the parameters needed to populate the sensor data record (SDR) Look-Up-Tables (LUTs). Our analysis results confirmed the good performance of J2 VIIRS, in general as good as previous VIIRS instruments and all non-compliances are expected to have low impact on data quality. Key sensor performance metrics include the signal to noise ratio (SNR), radiance dynamic range, reflective and emissive bands calibration performance, polarization sensitivity, spectral performance, response versus scan-angle (RVS) and scattered light response. A set of performance metrics generated during the pre-launch testing program will be compared to both the SNPP and JPSS-1 VIIRS sensors.

Oudrari, Hassan↗

NASA NTRS2022

Comparison Analysis of the Eastern Range False Cape 915-MHz Doppler Radar Wind Profiler

The United States Space Force (USSF) is responsible for space vehicle launches at its Eastern Range (ER), which includes the Cape Canaveral Space Force Station (CCSFS). Multiple systems are used to measure the atmosphere at the ER, including suites of Doppler Radar Wind Profilers (DRWPs) operating at 915MHz that measure winds within the lowest few kilometers of the atmosphere. Observations of boundary layer winds can be used for multiple applications, including serving as input to toxic dispersion models and characterizing winds for low-level aborts. In fall 2020 the USSF requested NASA’s Marshall Space Flight Center (MSFC) Natural Environments Branch (NE) to evaluate wind output from the False Cape(FC) DRWP system (MSFC NE 2021). In that analysis, it was found that data availability was low in the lowest few hundred meters of a profile, shown in Figure 1. To increase the available data, the USSF modified the quality control (QC) algorithm for the FCDRWP, which collected data from October 2020 to January 2021. In Fall 2021, the USSF requested NASA’s MSFC NE to evaluate the modified QC algorithm by comparing the data processed by the modified method (referred to as beam data) to data processed with the original QC method (referred to as original data). This report describes the system and the analyses that MSFC NE conducted to compare the availability and quality of data from the two QC methods

Maggire Fielder↗

DOE OSTI2020

Evaluation of Weakly Informed Priors for FLEX Data

On behalf of the U. S. Nuclear Regulatory Commission (NRC), Idaho National Laboratory (INL) has reviewed the development and use of “weakly informed prior” (WIP) probability distributions to obtain industry-wide failure probability and rate distributions for portable “FLEX” equipment, as documented in the Pressurized Water Reactor Owner’s Group (PWROG) report, FLEX Equipment Data Collection and Analysis (PWROG 18043-P) by MM Degonish. The review includes a description of the methods used by the PWROG analysts. It also includes an implementation of those methods for comparison purposes and an implementation of two constrained-noninformative (CN) distributions for further WIP comparisons. The report documents several issues that the review identified in the development of the WIP distributions. They relate to the quality and representativeness of the current portable “FLEX” component data, the choice of informed distributions for related installed components, and the lack of verification for the factors chosen to weaken the information from the installed components. Two errors occurred in the computations: the posterior distribution of the WIP was used to modify the WIP itself, resulting in a lack of independence between the WIP and the data; and an error was made in the conversion of WIP mean and variance values to beta distributions. The INL reviewers think the WIP distributions presented in the report are untenable for use in risk assessments at the present time because of these issues.

99 GENERAL AND MISCELLANEOUS↗

NASA NTRSDate not supplied

Analysis of CO Transport from Australia Fires and Its Impact to Ozone, Water Vapor and Clouds Using CrIS Single-Field-of-View Sounder Products and Other Remote Sensing and MERRA-2 Reanalysis Data

Australia’s unprecedented fire disasters at the end of 2019 to early 2020 emitted huge amounts of carbon monoxide (CO) and fire aerosol particles, and the long-range transport of the smoke plumes poses great impact to climate change, such as altering the Antarctic ozone (O3) hole. Spaceborne observations from satellites have been proven successful in monitoring CO from wildfires in the past decade and can be used to examine the associated CO transport. The primary remote sensing data used in this study is the Single Field of View (SFOV) Sounder Atmospheric Product (SiFSAP) derived from the Cross-track Infrared Sounder (CrIS) on SNPP, a new product that will be generated at NASA and released to the public in a few months. SiFSAP has a high spatial resolution of ~14 km and includes atmospheric profiles of temperature, water vapor, CO, O3, as well as cloud products, and as the SiFSAP algorithm performs both day- and night-time retrievals, it provides an additional observation for night-time in comparison to the day-time-only solar polar satellite instruments such as MOPPIT, OMPS, and TROPOMI. Most recent significant improvements in the quality of this product plus its good spatial resolution (better than most global weather and climate models) enable us to conduct process-oriented analysis of CO transport, and the variation of water vapor, O3 and clouds (optical depth, effective radius and cloud height) within and around the fire plumes. The wind fields from MERRA-2 reanalysis will be used to help characterize the transport. Other remote sensing data, such as CO from AIRS, MOPPIT and TROPOMI, O3 from OMPS and TROPOMI, as well as the UV aerosol index from OMI and OMPS, will be used and compared with SiFSAP sounder products. Cross-validation of CO and O3 from these different sensors with the corresponding MERRA-2 products will also be carried out. Along the plume transport path, some enhancement of O3 and correlation between fire aerosol, cloud optical depth and water vapor have been found but need further investigation. Using the transport of fire plumes over the Southern Pacific Ocean as a unique testbed, this study will demonstrate the trace species monitoring capability of current satellite observations, in particular, for CO and O3, and hopefully, it will provide some insight on the impacts on fire emissions on air quality and climate.

Xiaozhen (Shawn) Xiong↗

DOE OSTI2024

From soil to sequence: filling the critical gap in genome-resolved metagenomics is essential to the future of soil microbial ecology

Abstract Soil microbiomes are heterogeneous, complex microbial communities. Metagenomic analysis is generating vast amounts of data, creating immense challenges in sequence assembly and analysis. Although advances in technology have resulted in the ability to easily collect large amounts of sequence data, soil samples containing thousands of unique taxa are often poorly characterized. These challenges reduce the usefulness of genome-resolved metagenomic (GRM) analysis seen in other fields of microbiology, such as the creation of high quality metagenomic assembled genomes and the adoption of genome scale modeling approaches. The absence of these resources restricts the scale of future research, limiting hypothesis generation and the predictive modeling of microbial communities. Creating publicly available databases of soil MAGs, similar to databases produced for other microbiomes, has the potential to transform scientific insights about soil microbiomes without requiring the computational resources and domain expertise for assembly and binning.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Analysis of Tank 38H (HTF-38-22-91, -92) and Tank 43H (HTF-43-22-93, -94) Samples for Support of the Enrichment Control and Corrosion Control Programs

SRNL analyzed samples from Tank 38H and Tank 43H to support ECP and CCP. The results indicate the concentrations of most soluble species in the Tank 38H surface sample increased slightly from the previous surface sample. The Tank 38H sub-surface sample shows changes in concentration for soluble species in the solution with some increasing and some decreasing. The current Tank 38H sub-surface sample contains more sludge solids than the previous sample based on visual appearance. The small differences in the concentrations of major components between the Tank 38H surface and sub-surface samples indicate only minimal stratification of solution species within the tank. The Tank 43H surface and sub-surface samples are similar in composition to the previous samples. The similar solution compositions measured in the Tank 43H surface and sub-surface samples indicate a minimal stratification within the tank. The total uranium and plutonium in the current Tank 38H surface sample remains similar to the previous analysis. The Tank 38H sub-surface sample shows an increase in uranium and plutonium concentrations compared to the previous sample likely because of an increase in sludge solids in the current sample. The total uranium concentration in the two Tank 43H samples is essentially unchanged from previous sample results. The plutonium concentration in the Tank 43H surface sample is similar to the previous sample results while the plutonium in the Tank 43H sub-surface sample increased relative to the previous analysis. The sum of the major cations versus the sum of the major anions shows a difference of <10% for both samples from Tank 38H and for both samples from Tank 43H providing an indication of good data quality for the non-radioactive analytes in the samples. The silicon concentrations measured in the Tank 38H sub-surface sample increased compared with the previous sample results likely due to the presence of more sludge solids in the current sample. The Tank 38H surface sample silicon concentrations is similar to the previous sample results. The Tank 43H surface and sub-surface sample silicon concentrations both increased compared to the previous sample results. The samples analyzed from Tanks 38H and 43H show silicon concentrations ranging from 61.5 to 97.3 mg/L.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1980

The operational use of Landsat for lake quality assessment

A cooperative program between the Wisconsin Department of Natural Resources and the University of Wisconsin for the assessment, with Landsat data, of the trophic status of all the significant inland lakes in Wisconsin is described. The analysis technique is a semiautomatic data acquisition and handling system which, in conjunction with an analytical categorization scheme, can be used for classifying inland lakes into one of seven categories of eutrophication and one of four problem types.

Scarpace, F. L.↗

NASA NTRS1978

Buckling tests of structural elements applicable to large erectable space trusses

Detailed data on columns and center a joint for completeness is presented. Buckling data for a tripod arrangement of these columns using a cluster joint is also presented. The objectives of these test are: (1) to gain insight into joint requirements for truss structure; (2) to assess the structural qualities of the column and center joint designs; (3) to investigate the restraint provided by octetruss core members (tripod) to the cluster joints; (4) to provide insight into the level of analysis required to predict buckling behavior of Gr/E nestable columns both as simple columns and in a tripod arrangement; and (5) to provide a data base for Gr/E nestable columns.

Heard, W. L., Jr.↗

NASA NTRS2003

Fractals and Spatial Methods for Mining Remote Sensing Imagery

The rapid increase in digital remote sensing and GIS data raises a critical problem -- how can such an enormous amount of data be handled and analyzed so that useful information can be derived quickly? Efficient handling and analysis of large spatial data sets is central to environmental research, particularly in global change studies that employ time series. Advances in large-scale environmental monitoring and modeling require not only high-quality data, but also reliable tools to analyze the various types of data. A major difficulty facing geographers and environmental scientists in environmental assessment and monitoring is that spatial analytical tools are not easily accessible. Although many spatial techniques have been described recently in the literature, they are typically presented in an analytical form and are difficult to transform to a numerical algorithm. Moreover, these spatial techniques are not necessarily designed for remote sensing and GIS applications, and research must be conducted to examine their applicability and effectiveness in different types of environmental applications. This poses a chicken-and-egg problem: on one hand we need more research to examine the usability of the newer techniques and tools, yet on the other hand, this type of research is difficult to conduct if the tools to be explored are not accessible. Another problem that is fundamental to environmental research are issues related to spatial scale. The scale issue is especially acute in the context of global change studies because of the need to integrate remote-sensing and other spatial data that are collected at different scales and resolutions. Extrapolation of results across broad spatial scales remains the most difficult problem in global environmental research. There is a need for basic characterization of the effects of scale on image data, and the techniques used to measure these effects must be developed and implemented to allow for a multiple scale assessment of the data before any useful process-oriented modeling involving scale-dependent data can be conducted. Through the support of research grants from NASA, we have developed a software module called ICAMS (Image Characterization And Modeling System) to address the need to develop innovative spatial techniques and make them available to the broader scientific communities. ICAMS provides new spatial techniques, such as fractal analysis, geostatistical functions, and multiscale analysis that are not easily available in commercial GIS/image processing software. By bundling newer spatial methods in a user-friendly software module, researchers can begin to test and experiment with the new spatial analysis methods and they can gauge scale effects using a variety of remote sensing imagery. In the following, we describe briefly the development of ICAMS and present application examples.

Lam, Nina↗

DOE OSTI2021

INGENIOUS Thermal Conductivity Measurement Source Categorization

Thermal conductivity (TC) data taken for different wells at a specified drill depth. This is an abridged version of the complete SMU heat flow database, downloaded from the SMU node of the NGDS at the beginning of INGENIOUS (approximately April 2021), and filtered to the INGENIOUS study area. This National Geothermal Data System (NGDS) project aggregates geothermal data collected and curated by the SMU Geothermal Laboratory and its partner organizations. All columns in this database are the same as the SMU database, except for 2 additions associated with this project. Repeated columns are for data correlation purposes. Column descriptions and data types are the same as previous iterations of the SMU database. The new values that are the addition are two new columns developed as part of the INGENIOUS project: INGENIOUS TC Value | INGENIOUS notes INGENIOUS notes are individual notes that were written for specific data points during the analysis process. There are not always notes associated with each input value. INGENIOUS TC Value includes 4 values: 1. Assumed Measured These are values that are assumed to be measured thermal conductivity values, either within a specific well or within the same study region. Many of these have either a published reference, a reported standard deviation, or a unique thermal conductivity value. 2. Data release - assumed measured These are values in the SMU database that are from proprietary data that were added to the SMU database and are labeled as data release for their reference. These values were searched for in person at the SMU Geothermal Laboratory as well as virtual examination of data available on the NGDS. For many of these, there are reported thermal conductivity values associated with the heat flow data in the database, but no specific table or reference to measurements in the original data release files. 3. Known measured These are values that have a reported measurement, either as an original file in the SMU data files on the NGDS or a reported table in a publication. In the rare circumstances, Maria Richards or David Blackwell confirmed measurement. Confirmation of measurement would be written in the INGENIOUS notes column. 4. Unmeasured Unmeasured values are those that are known to be unmeasured, either estimated from another report or no information given. In the SMU database, there are wells that have a heat flow but no thermal conductivity. These are categorized as unmeasured. There are also heat flow values that are stated to have estimated or generalized average thermal conductivity values for the region and rock type. Because these are known to be unmeasured, they are categorized as such. 5. Blank Blank values are either A quality or X quality. These quality values are stated in the INGENIOUS notes. These values were not going to change associated with the heat flow analysis, so these were not examined.

15 GEOTHERMAL ENERGY↗

NASA NTRS2001

Sun and Sky Radiance Measurements and Data Analysis Protocols

This chapter is concerned with two types of radiometric measurements essential to verify atmospheric correction algorithms and to calibrate vicariously satellite ocean color sensors. The first type is a photometric measurement of the direct solar beam to determine the optical thickness of the atmosphere. The intensity of the solar beam can be measured directly, or obtained indirectly from measurements of diffuse global upper hemispheric irradiance. The second type is a measurement of the solar aureole and sky radiance distribution using a CCD camera, or a scanning radiometer viewing in and perpendicular to the solar principal plane. From the two types of measurements, the optical properties of aerosols, highly variable in space and time, can be derived. Because of the high variability, the aerosol properties should be known at the time of satellite overpass. Atmospheric optics measurements, however, are not easy to perform at sea, from a ship or any platform. This complicates the measurement protocols and data analysis. Some instrumentation cannot be deployed at sea, and is limited to island and coastal sites. In the following, measurement protocols are described for radiometers commonly used to measure direct atmospheric transmittance and sky radiance, namely standard sun photometers, fast-rotating shadow-band radiometers, automated sky scanning systems, and CCD cameras. Methods and procedures to analyze and quality control the data are discussed, as well as proper measurement strategies for evaluation of atmospheric correction algorithms and satellite-derived ocean color.

Frouin, Robert↗

DOE OSTI2024

Quantile regression-enriched event modeling framework for dropout analysis in high-temperature superconductor manufacturing

High-temperature superconductor (HTS) tapes have shown promising characteristics of high critical current, which are prerequisites for applications in high-field magnets. Due to the unstable growth conditions in the HTS manufacturing process, however, the frequent occurrences of dropouts in the critical current impede the consistent performance of HTS tapes. To manufacture HTS tapes with large scale, high yield, and uniform performance, it is essential to develop novel data analysis approaches for modeling the dropouts and identifying the related important process parameters. Conventional methods for modeling recurrent events, such as the point process, require the extraction of events from quality measurements. As the critical current is a continuous process, it may not comprehensively represent the drop patterns by transforming the time-series measurements into a set of events. Here, to solve this issue, we develop a novel quantile regression-enriched event modeling (QREM) framework that integrates the non-homogeneous Poisson process for modeling the occurrence of dropouts and the quantile regression for capturing the drop patterns. By incorporating the feature selection and regularization, the proposed framework identifies a set of significant process parameters that can potentially cause the dropouts of HTS tapes. The proposed method is tested on real HTS tapes produced using an advanced manufacturing process, successfully identifying important parameters that influence dropout events including the substrate temperature and voltage. The results demonstrate that the proposed QREM method outperforms the standard point process in predicting the occurrence of dropouts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Private, public, and bottled drinking water: Shared contaminant-mixture exposures and effects challenge

Background: Humans are primary drivers of environmental–contaminant exposures worldwide, including in drinking-water (DW). In the United States, point-of-use DW (POU–DW) is supplied via private tapwater (TW), public-supply TW, and bottled water (BW). Differences in management, monitoring, and messaging and lack of directly–intercomparable exposure data influence the actual and perceived quality and safety of different DW supplies and directly impact consumer decision–making. Objectives: The purpose of this paper is to provide a meta-analysis (quantitative synthesis) of POU–DW contaminant–mixture exposures and corresponding potential human–health effects of private-TW, public-TW, and BW by aggregating exposure results and harmonizing apical–health–benchmark–weighted and bioactivity–weighted effects predictions across previous studies by this research group. Discussion: Simultaneous exposures to multiple inorganic and organic contaminants of known or suspected human-health concern are common across all three DW supplies, with substantial variability observed in each and no systematic difference in predicted cumulative risk between supplies. Differences in contaminant or contaminant–class exposures, with important implications for DW–quality improvements, were observed and attributed to corresponding differences in regulation and compliance monitoring. Conclusion: The results indicate that human-health risks from contaminant exposures are common to and comparable in all three DW–supplies, including BW. Importantly, this study’s target analytical coverage, which exceeds that currently feasible for water purveyors or homeowners, nevertheless is a substantial underestimation of the breadth of contaminant mixtures in the environment and potentially present in DW. Thus, the results emphasize the need for improved understanding of the adverse human-health implications of long-term exposures to low–level inorganic–/organic–contaminant mixtures across all three distribution pipelines and do not support commercial messaging of BW as a systematically safer alternative to public-TW. Regardless of the supply, increased public engagement in source-water protection and drinking–water treatment is necessary to reduce risks associated with long-term DW–contaminant exposures, especially in vulnerable populations, and to reduce environmental waste and plastics contamination.

54 ENVIRONMENTAL SCIENCES↗