Remote Sensing in Three Dimesions: The Integration of New Global Data Sets
Explore the source record for details and available documents.
SRTM Remote Sensing Elevation Models Stereoscopy↗
SEARCH · Engineering Papers
Results for “data integrity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Validating Phasing and Geometry of Large Focal Plane Arrays
The Kepler Mission is designed to survey our region of the Milky Way galaxy to discover hundreds of Earth-sized and smaller planets in or near the habitable zone. The Kepler photometer is an array of 42 CCDs (charge-coupled devices) in the focal plane of a 95-cm Schmidt camera onboard the Kepler spacecraft. Each 50x25-mm CCD has 2,200 x 1,024 pixels. The CCDs accumulate photons and are read out every six seconds to prevent saturation. The data is integrated for 30 minutes, and then the pixel data is transferred to onboard storage. The data is subsequently encoded and transmitted to the ground. During End-to-End Information System (EEIS) testing of the Kepler Mission System (KMS), there was a need to verify that the pixels requested by the science team operationally were correctly collected, encoded, compressed, stored, and transmitted by the FS, and subsequently received, decoded, uncompressed, and displayed by the Ground Segment (GS) without the outputs of any CCD modules being flipped, mirrored, or otherwise corrupted during the extensive FS and GS processing. This would normally be done by projecting an image on the focal plane array (FPA), collecting the data in a flight-like way, and making a comparison between the original data and the data reconstructed by the science data system. Projecting a focused image onto the FPA through the telescope would normally involve using a collimator suspended over the telescope opening. There were several problems with this approach: the collimation equipment is elaborate and expensive; as conceived, it could only illuminate a limited section of the FPA (.25 percent) during a given test; the telescope cover would have to be deployed during testing to allow the image to be projected into the telescope; the equipment was bulky and difficult to situate in temperature-controlled environments; and given all the above, test setup, execution, and repeatability were significant concerns. Instead of using this complicated approach of projecting an optical image on the FPA, the Kepler project developed a method using known defect features in the CCDs to verify proper collection and reassembly of the pixels, thereby avoiding the costs and risks of the optical projection approach. The CCDs composing the Kepler FPA, as all CCDs, had minor defects. At ambient temperature, some pixels look far brighter than they should. These ghot h pixels have a higher rate of charge leakage than the others due to manufacturing variations. They are usually stable over time, and appear at temperatures above 5 oC. The hot pixels on the Kepler FPA were mapped before photometer assembly during module testing. Selected hot pixels were used as target gstars h for the purposes of EEIS testing. gDead h pixels are permanently off, producing a permanently black pixel. These can also be used if there is some illumination of the FPA. During EEIS testing, Dark Current Full Frame Images (FFIs) taken at room temperature were used to create the hot pixel maps for all 84 Kepler photometer CCD channels. Data from two separate nights were used to create two hot pixel maps per channel, which were cross-correlated to remove cosmic ray events which appear to be hot pixels. These hot pixel maps obtained during EEIS testing were compared to the maps made during module testing to verify that the end-to-end data flow was correct.
Standley, Shaun P.↗
A Comparison of Expedition Medical Condition List Treatment Directives with Integrated Medical Model Simulation Data Presentation and Briefing Report
This aerospace medicine clerkship project is under the direction of Dr. Sharmila Watkins and is in cooperation with Dr. Eric Kerstman and Dr. Ronak Shah. The questions of the research project are: 1. What are the main drivers of evacuation and loss of crew life (LOCL) on three Design Reference Missions (DRMs): Near Earth Asteroid (NEA), Lunar Sortie and Lunar Outpost using an inexhaustible International Space Station medical kit 2. What are the treatment designations for these driving medical conditions as listed in Expedition Medical Condition List (EMCL) 3. Do the drivers make sense in the context of the given Design Reference Mission (DRM) 4. Do any EMCL treatment designations need re-assessing.
Lewis, Robert↗
Vehicle-Level Reasoning Systems: Integrating System-Wide Data to Estimate the Instantaneous Health State
At the aircraft level, a Vehicle-Level Reasoning System (VLRS) can be developed to provide aircraft with at least two significant capabilities: improvement of aircraft safety due to enhanced monitoring and reasoning about the aircrafts health state, and also potential cost savings by enabling Condition Based Maintenance (CBM). Along with the benefits of CBM, an important challenge facing aviation safety today is safeguarding against system and component failures and malfunctions. Faults can arise in one or more aircraft subsystem their effects in one system may propagate to other subsystems, and faults may interact.
system-wide data↗
AgMIP Climate Data and Scenarios for Integrated Assessment
Climate change presents a great challenge to the agricultural sector as changes in precipitation, temperature, humidity, and circulation patterns alter the climatic conditions upon which many agricultural systems rely. Projections of future climate conditions are inherently uncertain owing to a lack of clarity on how society will develop, policies that may be implemented to reduce greenhouse-gas (GHG) emissions, and complexities in modeling the atmosphere, ocean, land, cryosphere, and biosphere components of the climate system. Global climate models (GCMs) are based on well-established physics of each climate component that enable the models to project climate responses to changing GHG concentration scenarios (Stocker et al., 2013).The most recent iteration of the Coupled Model Intercomparison Project (CMIP5; Taylor et al., 2012) utilized representative concentration pathways (RCPs) to cover the range of plausible GHG concentrations out past the year 2100, with RCP8.5 representing an extreme scenario and RCP4.5 representing a lower concentrations scenario (Moss et al., 2010).
agriculture↗
Enabling Space Biology Knowledge Discovery Through Biospecimen Sharing: The NASA Biological Institutional Scientific Collection
NASA and international partners have conducted experiments in space to understand the biological impacts and address hazards to health. The resulting basic and applied science is imperative to enabling humanity to venture back to the Moon and then to Mars and beyond. Sending organisms into space is a costly endeavor. All biospecimens not required by spaceflight-relevant Principal Investigators are harvested, preserved, and archived in the NASA Biological Institutional Scientific Collection (NBISC) to maximize the scientific return. The NASA Biological and Physical Sciences (BPS) Division has an ‘Open Science’ endeavor which includes NASA Genelab, the Space Biology Program’s Biospecimen Sharing Program, Physical Sciences Informatics, the Ames Life Sciences Data Archive, and NBISC. Its purpose is to integrate extensive data and biospecimen resources from spaceflight and/or ground-based analog experiments. NBISC biospecimens are collected and preserved according to well-established standard operating procedures to maintain scientific quality and are available on-request by the international scientific community. NBISC currently stores over 32,000 biospecimens from Shuttle, International Space Station, and ground-based space analog investigations. Tissue sharing has resulted in at least 33 publications since 2011 and 48 requests since 2016. Many requests for NBISC biospecimen come from first-time investigators who subsequently submit grants as the port-of-entry into the field of space biology. Some NBISC biospecimens have been awarded to NASA Genelab, who then generate various ‘Open Science’ -omics data sets on their platform for bioinformatics. Other NBISC biospecimen awards have led to multiple studies such as fecal microbiome analysis, DNA damage analysis using single-cell DNA sequencing, enzymatic-pathway identification involved in spaceflight muscle atrophy, and characterization of ocular morphological changes. Of note, NBISC has expanded to include a new Space Microbial Culture Collection (SMCC) for the collection, identification, documentation, long-term preservation, and distribution of space-related microbial isolates.
Ryan T. Scott↗
Toward Closing the Regional Energy Budget Over Ocean When Integrating Satellite Derived Energy Data Products
Explore the source record for details and available documents.
Seiji Kato↗
Integrating Multi-agency Data Products in a Cloud-based Platform for Streamlined Discovery, Visualization, and Use
Earth science data users almost always have an interest in utilizing geospatial data from multiple agencies. As computing capability and cloud-based infrastructures accelerate the pace at which scientific research can be done, there is a growing need to enable search, discovery, and use of multi-agency geospatial observations relevant for a common use case - without undergoing the search and discovery process in a less efficient, disparate path with each agency. NASA’s Earth Observing System Data and Information System (EOSDIS) and NOAA’s National Environmental Satellite, Data and Information Service (NESDIS) both support a wide range of Earth science disciplines’ research, operations, and applications activities. Presently, however, there are few examples of data discovery frameworks supporting an inquiry of both NASA’s and NOAA’s extensive archives of Earth observations that are equally suitable for a particular science scenario, regardless of the agency that “owns” the data. NASA and NOAA are collaborating on a data expedition platform for exploring fire weather using data products from both agencies. Users will be able to search, discover, and visualize NASA and NOAA products in one interface. Each agency will curate metadata for its respective datasets, providing for a rich search experience. The collaboration will pilot a shared search interface into these metadata datastores. Data products will be stored in the cloud in cloud-optimized format(s). These formats will allow for optimized data access and visualization to support the “data expedition”. Avenues for further development and application of this cloud-based, multi-agency data provisioning platform will also be discussed.
cloud-based technology↗
Extinction risk in extant marine species integrating palaeontological and biodistributional data
Explore the source record for details and available documents.
K. S. Collins↗
Attributing Performance Variation from Integrated Application and System Data.
Abstract not provided.
Aaziz, Omar Raad↗
Integrating Public and Private Data for Modeling and Optimization of Shale Oil and Gas Production
This study implemented a data-intensive supervised machine learning approach, through a quasi-experimental framework, with the objective of quantifying the impact of oil and gas operator-specific proprietary data on ML-based predictive model performance as compared to using oil and gas datasets that are publicly available.
Romanov, Vyacheslav↗
NLR HPC Facility Power Usage Effectiveness (PUE) Data
Timeseries of Energy Systems Integration Facility (ESIF) Data Center Power Usage Effectiveness (PUE) Data provided in Parquet and compressed CSV formats Power Metrics Timeseries Fields: ts: Timestamp cooling_kw: Cooling (kilowatts) - Captures the power used by fans and pipe trace heaters associated with outdoor cooling equipment. The dedicated tower filter pump power is also captured as cooling load. energy_reuse: Energy Reuse Effectiveness hvac_kw: Heating, ventilation, and air conditioning (kilowatts) - Captures fan walls, fan coils that support the data center electrical rooms, and the make-up air unit. it_power_kw: IT equipment (kilowatts) - Captures power used by the IT equipment on the data center floor. plug_and_light_kw: Lights and utility plugs (kilowatts) - Captures power associated with the data center and dedicated mechanical room. The crank-case heater for the emergency standby generator is also captured as light and plug load. pue: Power Usage Effectiveness pump_kw: Pumps (kilowatts) - Captures power from pumps that move water in the data center Energy Recover Water loop and the Tower Water loops, and also captures power used by the boost pumps that circulate water through the fan walls. Note: The tower filter pump runs constantly to filter water from the data center cooling tower system, so 2.67 kilowatts are attributed to this pump and that is not reflected in this data field. day: Day of month Outside Weather Station Timeseries Fields: ts: Timestamp outside_air_humidity: Outside air humidity - Relative humidity percent outside_air_temp: Outside air temperature - Degrees Fahrenheit day: Day of month More detail: High-Performance Computing Data Center Power Usage Effectiveness
97 MATHEMATICS AND COMPUTING↗
DTED Integrity Monitoring Using Differential GPS and Radar Altimeter
This paper discusses a real-time digital terrain elevation data (DTED) integrity monitor for Civil Aviation applications. Providing pilots with Synthetic Vision (SV) displays containing terrain information has the potential to improve flight safety by improving situational awareness and thereby reducing the likelihood of Controlled Flight Into Terrain (CFIT). Utilization of the DTED for flight-critical terrain-displays, however, requires a DTED integrity check and timely integrity alerts to the pilots in those cases where DTED may provide hazardous misleading information. The discussed integrity monitor checks the consistency between the sensed terrain profile as computed from DGPS and radar altimeter data and the terrain profile as given by the DTED. Probability of agreement between these two profiles is used to monitor the DTED integrity. A case study to verify the integrity monitor#s performance is presented based on data collected during flight testing performed by NASA at Asheville, NC.
Young, Steve↗
Opportunities for an Integrated Web-Based Workbench for Data Access and Analysis - 20244
Management of environmental issues can require integration of multiple types of data and information, conducting data analysis and interpretation, and providing data visualization for effective communications. These data elements are important for site management to support regulator interactions and provide defensibility for remedial decisions. Databases and information repositories are core elements of managing data; however, efficient data access and analysis also enable effective site management. The U.S. Department of Energy (DOE) Hanford Site is an example of a complex site with a voluminous quantity of environmental data and a need for efficient site management. Different tiers of data and information tools have been developed and deployed to address site needs. These tools are configured for ready access via the web site interfaces and meet the rigorous quality requirements for environmental site management. Evolving efforts are focused on an integrated platform to meet site environmental management needs. In this platform, users can access site information at multiple levels of detail based on their need and permissions, so that data and associated analyses are presented within the context of the site mission and the user's management or technical needs. This concept is not only applicable at individual sites like Hanford but also applicable at other sites within the DOE complex. An integrated web-based architecture that links data visualization, data analytics, and management tools can provide holistic access to large data sets, minimize complexity, and maximize interactivity and technical communication. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Further studies to extend and test the area-time-integral technique applied to satellite data
The principal goal of this project is to establish relationships that would allow application of area-time integral (ATI) calculations based upon satellite data to estimate rainfall volumes. The research has been pursued using two different approaches, which for convenience can be designated as the 'fixed-threshold approach' and the 'variable-threshold approach'. In the former approach, an attempt is made to determine a single temperature threshold in the satellite infrared data that would yield ATI values for identifiable cloud clusters which are most closely related to the corresponding rainfall amounts. Results thus far have indicated that a strong correlation exists between the rain volumes and the satellite ATI values, but the optimum threshold for this relationship seems to differ from one geographic location to another. The difference is probably related to differences in the basic precipitation mechanisms that dominate in the different regions. The average rainfall rate associated with each cloudy pixel is also found to vary across the spectrum of ATI values. Work on the second, or 'variable-threshold', approach for determining the satellite ATI values was essentially suspended during this period due to exhaustion of project funds. Most of the ATI work thus far has dealt with cloud clusters from the Lagrangian or 'floating-target' point of view. For many purposes, however, the Eulerian or 'fixed-target' perspective is more appropriate. For a very large target area encompassing entire cluster life histories, the rain volume-ATI relationship would obviously be the same in either case. The important question for the Eulerian perspective is how small the fixed area can be made while maintaining consistency in that relationship.
Smith, Paul L.↗
Data fusion enhanced multi-modality wellbore integrity inspection system
A downhole multi-modality inspection system includes a first imaging device operable to generate first imaging data and a second imaging device operable to generate second imaging data. The first imaging device includes a first source operable to emit energy of a first modality, and a first detector operable to detect returning energy induced by the emitted energy of the first modality. The second imaging device includes a second source operable to emit energy of a second modality, and a second detector operable to detect returning energy induced by the emitted energy of the second modality. The system further includes a processor configured to receive the first imaging data and the second imaging data, and integrate the first imaging data with the second imaging data into an enhanced data stream. The processor correlates the first imaging data and the second imaging data to provide enhanced data for detecting potential wellbore anomalies.
Kasten, Ansas Matthias↗
Data-Driven Discovery and Experimental Validation of Solvent Polarity Effects on Conjugated Polymer Solution-to-Film Assembly Pathways
Understanding how solvent properties influence the solution-to-film assembly of conjugated polymers remains a critical challenge due to the complex and intertwined nature of polymer–solvent interactions. In this study, we integrate a data-driven framework with experimental validation to identify key parameters influencing the assembly and performance of poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (DPP-DTT) in organic field-effect transistors (OFETs). A machine learning (ML) approach identified the normalized Reichardt polarity parameter (E T N ) as a significant descriptor correlated with DPP-DTT hole mobility (μ). Systematic DPP-DTT devices fabricated using solvents across a wide E T N range revealed that higher E T N solvents yield enhanced μ. To elucidate the structural origins of high μ, we conducted comprehensive analyses using UV–vis–NIR spectroscopy and grazing incidence wide angle X-ray scattering (GIWAXS) measurements. The results revealed that films processed from high E T N solvents exhibit reduced paracrystallinity. By analyzing the solution-state behavior using optical microscopy and solution WAXS, we revealed polymer solubility differences in the various solvents and associated distinct polymer assembly pathways, elucidating why the high E T N solvent produces long-range ordered films. Notably, the high E T N solvent shows a pronounced preference for liquid-crystal (LC)-mediated assembly, providing a mechanistic explanation for the enhanced structural order. Therefore, these results demonstrate that solvent polarity, as evaluated by E T N , serves as an important parameter that plays a significant role in the DPP-DTT assembly pathway and resultant solid-state morphology. This work provides a strategy for integrating data science with experiments to identify critical parameters associated with complex polymer systems and helps guide rational process design for high-performance organic electronics.
36 MATERIALS SCIENCE↗