Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “currents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

In-field critical current and pinning mechanisms at 4.2 K of Zr-added REBCO coated conductors

The critical current and pinning mechanisms at 4.2 K have been studied over a magnetic field range of 0–14 T for Zr-added (0, 5 and 15 mol.%) REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors fabricated by advanced metal organic chemical vapor deposition (A-MOCVD). It is found that the (Ba + Zr)/Cu content in Zr-added (5 and 15 mol.%) REBCO affects the critical current at 77 K, 0 T as well as density, continuity and shape of BaZrO 3 (BZO) self-assembled nanocolumns and RE 2 O 3 in-plane precipitates that significantly enhance the pinning force density Fp(H) as well as isotropic pinning landscape at 4.2 K. In addition to bell-shape dependence of critical current density, J c , at 4.2 K with (Ba + Zr)/Cu content we observed an unusual Fp(H) behavior correlated to particular type of pinning centers, morphology and distribution that have been revealed by TEM microstructure analysis. By fitting the Dew–Hughes equation of the pinning force density Fp(H) at 4.2 K we extract the scaling behaviors of the Fp(H) associated with the competition of pinning mechanisms driven by vertically-aligned BZO nanorods and in-plane RE 2 O 3 pinning defects. This result sheds light on approaches towards interactive control of strong and isotropic pinning centers in Zr-added REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors, and especially understanding the correlation between microstructural characteristics and vortex pinning mechanisms at 4.2 K in high magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Rapid assessment of REBCO CC angular critical current density J c (B, T = 4.2 K, θ) using torque magnetometry up to at least 30 tesla

Abstract Detailed design of REBa 2 Cu 3 O 7 − x (REBCO)-based magnets ideally relies on knowledge of the full angular and wide temperature range characterization of the critical current I c of the REBCO coated conductors (CC) at high magnetic fields. In practice, however, obtaining I c ( B , T , θ ) data by the commonly used electrical transport technique is expensive, tedious, and difficult, due to high critical current values that exceed 2000 A for B | | a b -plane ( θ = 90 deg). The conductors are often damaged during angular transport measurements at angles approaching the ab -plane. Therefore, so far, REBCO magnets have been designed without full I c ( B , T , θ ) data sets. Here, we present J c ( B , T , θ ) results for more than twenty samples of CC all made to the same advanced pinning specification produced by SuperPower Inc. For this, we employed torque magnetometry, benchmarking the results to transport I c measurements mostly made away from ab -plane, finding good agreement with scaling factors ≈1–1.3. What is striking is the huge variety of properties exhibited by the samples, even for CC made recently. Given the huge attention now being paid to the effects of screening currents and to the torques generated by offsets between the tape plane and the local magnetic field vector, our data set suggests some caution in detailed design of such magnets without having data of the type presented here.

Physics↗
DOE OSTI2022

Prediction of strain, inter-layer interaction and critical current in CORC ® wires under axial strain by T-A modeling

Superconducting conductors on round core (CORC ® ) cables and wires can meet the needs of large high-field magnets, such as particle accelerators and compact nuclear fusion machines, due to their simple cabling process, high current-carrying capacity and reliable operation under high mechanical stresses. Many high-field magnets require CORC ® cables to carry a current of thousands of amperes in a background magnetic field exceeding 20 T. As a result, the large electromagnetic forces will deform the cable in the axial direction due to hoop stress and in the transverse direction by compressive stress. Therefore, it is essential to determine the irreversible deformation limit of the CORC ® cable under axial tensile load and optimize the cabling parameters to potentially extend this limit. Analytical and numerical methods are developed to assess the performance degradation of CORC ® wires under axial tensile load. The strain level, interlayer contact pressure and friction and their impact on the critical current are calculated by combining the mechanical response and the T-A method. Analyzing the results shows that the winding angle of the tape and the Poisson’s ratio of the inner core are key factors affecting the irreversible tensile strain limit of CORC ® wires. The smaller the winding angle and the higher the Poisson’s ratio of the inner core, the higher the irreversible tensile strain limit. For multi-layer CORC ® wires, the initial contact pressure caused by the cabling process must also be considered. The inter-layer interaction is coupled with the tape strain of each layer. The results of this research can serve as a basis for optimizing and designing CORC ® wires with extended irreversible strain limits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

High critical current STAR ® wires with REBCO tapes by advanced MOCVD

RE–Ba–Cu–O (REBCO, RE = rare earth) symmetric tape round (STAR ® ) wires of 1.5–2.5 mm diameter have been fabricated with 4–12 strands of symmetric REBCO tape made by advanced metal organic chemical vapor deposition (MOCVD). 1.5 mm diameter STAR ® wires made with just four advanced MOCVD tape strands are able to sustain nearly the same critical current (I c ) as 2.5 mm diameter wires made with 12 commercial-grade tape strands. An I c of 1070 A, corresponding to an engineering current density (J e ) of 597 A mm –2 , has been demonstrated at 4.2 K, 30 T in 1.5 mm diameter, four-strand wire at a bend radius of 15 mm. This I c value exactly matches the Ic expected from the lift factor of the tape strands used in the wire. The 2.5 mm diameter STAR ® wires made with 12 advanced MOCVD tape strands exhibit an I c of 1075 A at 77 K, self-field and sustained currents of 2500–2750 A at 4.2 K, 30 T before burnout, corresponding to a J e greater than 500 A mm –2 . Finally, these results show that the cost of STAR ® wires can be substantially reduced using fewer tape strands of high-performance advanced MOCVD tapes and that the superior bend performance of STAR ® wires can be maintained, even using 12 strands of advanced MOCVD tapes with 4 μm thick REBCO films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Evidence for current suppression in superconductor–superconductor bilayers

Superconducting radio frequency (SRF) cavities, which are critical components in many particle accelerators, need to be operated in the Meissner state to avoid strong dissipation from magnetic vortices. For a defect-free superconductor, the maximum attainable magnetic field for operation is set by the superheating field, B sh , which directly depends on the surface current. In heterostructures composed of different superconductors, the current in each layer depends not only on the properties of the individual material, but also on the electromagnetic response of the adjacent layers through boundary conditions at the interfaces. Three prototypical bilayers [Nb 1–x Ti x N (50 nm)/Nb, Nb 1–x Ti x N (80 nm)/Nb, and, Nb 1–x Ti x N (160 nm)/Nb] are investigated here by depth-resolved measurements of their Meissner screening profiles using low energy muon spin rotation (LE-µSR). From fits to a model based on London theory (with appropriate boundary and continuity conditions), a magnetic penetration depth for the thin Nb 1–x Ti x N layers of λ Nb 1–x Ti x N = 182.5(31) nm is found, in good agreement with literature values for the bulk alloy. Using the measured λ Nb 1–x Ti x N , the maximum vortex-free field, B max , of the superconductor-superconductor (SS) bilayer structure was estimated to be 610(40) mT. The strong suppression of the surface current in the Nb 1–x Ti x N layer suggests an optimal thickness of ~ 1.4λ Nb 1–x Ti x N = 261(14) nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Validation of theory-based models for the control of plasma currents in W7-X divertor plasmas

A theory-based model for the control of plasma currents for steady-state operation in W7-X is proposed and intended for model-based plasma control. The conceptual outline implies the strength of physics-based models: it offer approaches applicable to future conditions of fusion devices or next-step machines. The application at extrapolated settings is related to the validity range of the theory model. Therefore, the predictive power of theory-based control models could be larger than for data-driven approaches and limitations can be predicted from the validity range for the prediction of bootstrap currents in W7-X. The model predicts the L/R response when density or heating power is changed. The model is based on neoclassical bootstrap current calculations and validated for different discharge conditions. While the model was found to be broadly applicable for conducted electron-cyclotron-heated discharges in W7-X, limits were found for cases when the polarization of the electron cyclotron heating was changed from X2 to O2-heating. The validity assessment attempts to quantify the potential of the derived model for model-based control in the operational space (density, heating power) of W7-X.

neoclassical modelling↗
DOE OSTI2022

Doubling off-axis electron cyclotron current drive efficiency via velocity space engineering

For the first time, experiments on the DIII-D tokamak have demonstrated electron cyclotron current drive with more than double the conventional efficiency by tailoring the wave–particle interactions in velocity space using a novel ‘top launch’ geometry. Steering the EC waves to propagate nearly parallel to the resonance drives current more efficiently by (1) selective damping on electrons with higher parallel velocity v ||, and (2) longer absorption path to compensate for inherently weaker absorption at higher v ||. Experiments using a fixed-injection top launch system find an optimal velocity space interaction for maximum current drive efficiency at ρ ~ 0.5 where the ease of drawing out a high v || electron tail is balanced by sufficient absorption.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Multi-harmonic electron cyclotron heating and current drive scenarios for non-inductive start-up and ramp-up in high field ST-40 spherical tokamak

We report non-inductive start-up and ramp-up is an important topic for spherical tokamak reactor design as the central solenoid implementation is highly restrictive particularly for the low-aspect-ratio tokamak configuration. In the high field spherical tokamak (ST), ST-40 with B T0 ≤ 3 T, a preparation is underway for high power ECH and ECCD current start-up/ramp-up experiments utilizing two MW-class 140/105 GHz gyrotrons. Here, we explored various ECH/ECCD scenarios for a low-field-side (LFS) launch-angle steerable waveguide launcher placed near the mid-plane region. Due to the large toroidal field variation of ST configuration, multiple cyclotron harmonic resonance layers could exist within the plasma. In this start-up and ramp-up regime, both fundamental and second harmonic ECH resonances must be considered. We find that even with the presence of X-II resonance layer in the plasma, an efficient X-I ECH and ECCD regime can be accessed for the low electron temperature T e0 as low as 200 eV which is a typical starting temperature of ECH heated plasmas in an open-field-line configuration. The presence of X-II resonance could become significant at higher T e0 as X-II absorption increases with T e0 which could reduce the current ramp-up efficiency as the power reaching X-I is reduced. Finally for the pure X-I regime where the 2Ω e resonance is moved outside the plasma with B T0 ~ 3.4 T, we find that it is possible to reach the full current of I p ~ 1 MA fully non-inductively with the ECH power of ~1 MW at n e0 ~ 1.0 × 10 19 m -3 using 105 GHz frequency gyrotron. By reducing the outer limiter position R L ~ 78 cm to 70 cm, the pure X-I regime is recovered at the rated ST-40 magnetic field of B T0 ~ 3.0 T. This X-I regime is accessible with a relatively broad range of launched n II or the launching angles. A survey of X-mode X-II ECH and ECCD at higher density regimes is also shown for completeness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Low leakage current in heteroepitaxial Al 0.7 Sc 0.3 N ferroelectric films on Ga N

Wurtzite ( Al , Sc ) N ferroelectrics are attractive for microelectronics applications due to their chemical and structural compatibility with wurtzite semiconductors, such as Ga N and ( Al , Ga ) N . However, the leakage current in epitaxial stacks reported to date should be reduced for reliable device operation. Here, we demonstrate low leakage current in epitaxial Al 0.7 Sc 0.3 N films on Ga N with well-saturated ferroelectric hysteresis loops that are orders of magnitude lower (i.e., 0.07 A cm − 2 ) than previously reported films (1–19 A cm − 2 ) having similar or better structural characteristics. We also show that, for these high-quality epitaxial ( Al , Sc ) N films, structural quality (edge and screw dislocations), as measured by diffraction techniques, is not the dominant contributor to leakage. Instead, the small leakage in our films is limited by thermionic emission across the interfaces, which is distinct from the large leakage due to trap-mediated bulk transport in the previously reported ( Al , Sc ) N films. To support this conclusion, we show that Al 0.7 Sc 0.3 N on lattice-matched In 0.18 Ga 0.82 N buffers with improved structural characteristics but higher interface roughness exhibit increased leakage characteristics. This demonstration of low leakage current in heteroepitaxial ( Al , Sc ) N films and understanding of the importance of interface barrier and surface roughness can guide further efforts toward improving the reliability of wurtzite ferroelectric devices. Published by the American Physical Society 2025

36 MATERIALS SCIENCE↗
DOE OSTI2021

Feed-Forward Compensation for Model Predictive Control in Tri-port Current-Source Medium-Voltage String Inverters for PV-Plus-Storage Farms

The novel tri-port current-source medium-voltage string inverter (TCS-MVSI) is a promising candidate for large-scale PV-plus-storage (PVS) farms owing to its galvanic isolation, easy storage integration, soft-switching capability across entire load range, controlled low dv/dt and EMI, benign fault tolerance, etc. Due to its low inertia feature, traditional PI-based control cannot manage large transients effectively. Instead, a model-based predictive control (MPC) is proposed to achieve robust and stable operation. As is well known, the control performance of MPC is compromised by the sampling and computational delay during implementation significantly, if not well addressed. This paper analyzed and quantified these delays and then proposes feed-forward compensation (FFC) for the MPC method to compensate the delays and the large parameter variations due to the low-inertia nature. In addition, this method also compensates for the high dc-link ripple within each switching cycle, a unique issue for low-inertia converters. Here, the proposed method requires low computational effort, allowing it to be extended for multiple ports. The effectiveness of the proposed method has been validated in experiments. In 10 kW test, the proposed method decreases the average dc-link current by 17%, leading to ~20% conduction losses and ~0.5% increase in converter efficiency. In addition, the peak dc-link current also decreases by 15%, resulting in reduced transformer size. As a result, an increased power density can be achieved with the proposed method. Similar improvements have been observed across the power range from 2 kW to 10 kW.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Current Source Inverter Based Large Constant Power Speed Ratio SPM Machine Drive for Traction Applications

A high-performance surface permanent magnet (SPM) machine drive with an extended constant power speed ratio is proposed using a current source inverter (CSI) for a traction application. The constant-power operation regions of an SPM machine can be extended in an appealing fashion by taking advantage of the output voltage boost capability of the CSI. The CSI is naturally a boost-type converter, in contrast to the voltage source inverter (VSI) which has buck-type characteristics. To investigate the value of the CSI voltage boost feature, a new traction motor with higher rated voltage and lower rated current has been designed and compared to the motor that would be used with a VSI. The lower CSI current makes it possible to reduce the mass of the inverter and output power cable, benefiting power density and cost reduction. The SPM machine is modeled in the synchronous reference frame including the effect of the ac filter capacitors at the CSI output terminals. The capability of extending the speed range of the proposed motor is verified via closed-form analysis and FEA simulation, and its performance characteristics are compared with those of a VSI-based SPM motor of the same type.

42 ENGINEERING↗
DOE OSTI2020

Test Results of Fast Decaying Current-Induced AC Losses in SHMS Superconducting Magnets at Jefferson Lab

The 11 GeV Super High Momentum Spectrometer (SHMS) of Hall C, part of the recent 12 GeV accelerator Upgrade at Jefferson Lab, was successfully commissioned in 2017. Fast current discharges of the SHMS Q2, Q3 quadrupoles and dipole superconducting magnets experienced some level of operational difficulty, during commissioning and normal operation. Measurements and analyses demonstrate that the fast current discharge leads to substantial AC losses in the conductor and subsequently triggers a quench-back effect. The details of the measurements and analyses have been reported previously. This paper focuses on the test results of the magnets using a reduced value of the protection dump resistor for each magnet to lower the current decay rate. Finally, the test results confirmed that the reduced dump resistances eliminated the quench-back effect for the SHMS Q2, Q3 and Dipole magnets, thus improving their cryogenic operability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

HTS Dipole Magnet Model for the Persistent Current Operation

Recent advances in the fabrication of high-temperature superconducting (HTS) coils allow the design of superconducting accelerator magnets that work in a persistent current mode. Many various, rather low-field magnets in particle accelerators operate in the DC current mode. Fermilab designed, fabricated, and tested an HTS dipole magnet model that has 20-mm air gap and a magnetic field up to 0.5 T. The magnet has a primary copper coil that for a short period pumps the energy in the short-circuited secondary HTS coil. Here, the current paper presents the design, fabrication, and testing of this magnet at liquid-nitrogen temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

High Current Density Cables for Simpler HTS Magnets in Fusion Energy Systems

High current density cables are needed for the engineering design of potentially low cost, simpler geometry high temperature superconducting (HTS) magnets in the promising magnetic configurations as a fusion pilot plant (FPP) option. Significant technology maturation efforts are underway by privately funded startups with the goal to demonstrate mature HTS magnet technology. Test results, however, indicate critical engineering issues remain to be addressed to meet performance goals, and demonstrate HTS coil operation repeatability and reliability. To this end, exploring and enabling multiple viable conductor and cable options is vital. Partnering with a private fusion startup and manufacturers of superconducting strands and cables, Princeton Plasma Physics Laboratory (PPPL) is exploring and seeking to de-risk the aggressive high field approach presently targeted by others. Our main objective is to develop, test and calibrate novel high current density cables for a broad deployment of affordable and reliable coils using Bi-2212 conductors. If successful, such a project will provide technical feasibility for promising FPP configurations including spherical tokamaks (ST) and compact stellarators. Here, we aim at the state-of-the-art Bi-2212 cable technologies toward a current density of 100 A/mm 2 at 16 T and 4.2 K–10 K operation for low cost, simpler geometry toroidal field (TF) coils for compact stellarators developed by fusion startup companies on a timeline consistent with the FPP initiatives and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Correlations Between In-Line X-ray Diffraction Data and In-Field Critical Current of Long, 4-μm Thick Film REBCO Tapes Made by Advanced MOCVD

REBa 2 Cu 3 O 7-δ (REBCO, RE = rare earth) tapes with high critical current can be very impactful in high magnetic field applications at low temperatures and power applications at high temperatures. A pilot-scale Advanced Metal Organic Chemical Vapor Deposition (MOCVD) method was used to fabricate 50-m-long, 4+μm-thick REBCO tape in a single pass. Critical currents 3.3x that of commercial HTS tapes were achieved at 20 K, 12 T in these 50-m-long tapes. An in-line 2D X-ray Diffraction (XRD) system has been used to assess the quality of the long tapes in real-time, during manufacturing. The key peaks of REBCO, REO, and BZO phases were identified and utilized for tape quality analysis. Furthermore, a 20-m tape made by Advanced MOCVD was tested over its entire length by reel-to-reel (R2R) scanning Hall-probe microscopy (SHPM) at 65 K, 0.25 T, 2 T, and 4 T. 4-mm-wide strands of Advanced MOCVD tapes showed mean critical currents at 65 K of 530 A, 200 A, and 104 A at 0.25 T, 2 T, and 4 T respectively. The combined use of in-line and offline characterization techniques provides a reliable approach for assessing long REBCO tapes during manufacturing, serving as an effective feedback source for quality control in scaled-up REBCO tape deposition processes. This advancement contributes to the production of longer and more uniform high-performance REBCO tapes for large-scale, high-field superconducting applications

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Review of recent studies on nanoscale electrical junctions and contacts: Quantum tunneling, current crowding, and interface engineering

The study of charge carrier transport at nanoscale electrical contacts is crucial for the development of next-generation electronics. In this study, we review recent modeling efforts on quantum tunneling, current crowding, and contact resistance across electrical interfaces with nanometer scale dimensions. A generalized self-consistent model for quantum tunneling induced electron transport in metal–insulator–metal (MIM) junctions is summarized. Rectification of a dissimilar MIM junction is reviewed. A modified two-dimensional (2D) transmission line model is used to investigate the effects of spatially varying specific contact resistivity along the contact length. The model is applied to various types of electrical contacts, including ohmic contacts, MIM junction based tunneling contacts, and 2D-material-based Schottky contacts. Roughness engineering is recently proposed to offer a possible paradigm for reducing the contact resistance of 2D-material-based electrical contacts. Contact interface engineering, which can mitigate current crowding near electrical contacts by spatially designing the interface layer thickness or properties, without requiring an additional material or component, is briefly reviewed. Tunneling engineering is suggested to eliminate severe current crowding in highly conductive ohmic contacts by introducing a thin tunneling layer or gap between the contact members. Furthermore, unsolved problems and challenges are also discussed.

2D materials↗
DOE OSTI2021

Operando Topography and Mechanical Property Mapping of CO 2 Reduction Gas-Diffusion Electrodes Operating at High Current Densities

Electrochemical atomic force microscopy (EC-AFM) enables measurement of electrode topography and mechanical properties during electrochemical reactions. However, for aqueous-based reactions that make gas products, such as CO 2 reduction and water splitting into CO/H 2 , current densities below 1 mA cm −2 have been necessary to prevent formation of bubbles at the electrode; such bubbles can stick to the AFM probe and prevent further AFM imaging. Here, we demonstrate a novel cell design with a gas-diffusion electrode (GDE) to exhaust the gas products, thereby enabling high current density EC-AFM measurements at 1, 10, and 100 mA cm −2 that are not disturbed by bubble formation at the electrode surface. These experiments revealed a stable morphological structure of Cu catalysts deposited on GDEs during high current density operation. Systematic spatially resolved maps of deformation and adhesion showed no signs of a gas-liquid interface between catalyst particles of the GDE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Feasibility of Passive MOSFET Paralleling for Photovoltaic Current-Voltage Curves

Current-voltage curves are an important method of characterizing Photovoltaic (PV) Modules. NREL has developed several low-cost MOSFET-based devices that can characterize PV cells and modules. The size of PV modules that can be measured is limited by the power limitations of a single MOSFET. By using multiple MOSFET devices, each can operate at a lower current, paralleled on resistance is also decreased allowing for higher power loads. Operating multiple devices in parallel can cause an imbalance in current, thus causing some devices to conduct more, pushing them into a thermal runaway condition. To investigate this, an active feedback circuit was tested with paralleled devices using a PV module load. The efficacy, limitations, and design considerations of using parallel MOSFET loads for PV characterization are explored. This work is not new, but the implementation of a paralleled architecture in a low cost characterization tool is novel.

14 SOLAR ENERGY↗