Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

G-LiHT Campaign Leaf Mass Area and Water Content, Mar2017: Puerto Rico

Measurements of leaf mass per area (LMA) and fresh-leaf water content collected from 54 tropical tree species. Data includes leaves collected from fully sunlit and shaded canopy strata as well as leaves for young, mature, old and senescent leaf ages. Data for each sample includes the relative age estimate, leaf canopy position and sample number. This data was collected as part of the 2017 NGEE-Tropics / NASA G-LiHT airborne campaign. See related datasets for sample details including photographs, leaf-level optical properties (i.e. reflectance and transmittance) and leaf carbon and nitrogen.

54 ENVIRONMENTAL SCIENCES↗

Soil water content raw data, 2015 - 2017, at Manaus, Brazil

Raw soil water content data from K34 tower site on a plateau near Manaus, Brazil. Attached files include data, related metadata excel files, and sensor manual PDFs. All sensors on a single Campbell CR3000 data logger were installed near ground on the K34 tower. Additional file level metadata is contained in the referenced dataset.

54 ENVIRONMENTAL SCIENCES↗

Leaf C and N content, Feb2016-May2016, PA-SLZ, PA-PNM, PA-BCI: Panama

This dataset contains carbon, hydrogen and nitrogen content data of 33 tree species collected from February to May 2016 at the NGEE-Tropics Bosque Protector San Lorenzo (PA-SLZ) and Parque Natural Metropolitano (PA-PNM) sites in Panama. Data from Barro Colorado Island (PA-BCI) is only available for March 2016. This data was collected as part of the 2016 ENSO campaign. See related datasets for further sample details, leaf water potential, leaf spectra, gas exchange and leaf mass per area (LMA). Most leaves were sampled from sunlit canopy trees. VERSION 2 update. The identification of a species from the PNM site has been corrected as follows: the identification of the tree initially identified as Pseudosamanea guachapele (ALBIED) has been revised to Albizia adinocephala (ALBIAD). The updated data package includes revised data, metadata and protocol documents updated to reflect this change.

54 ENVIRONMENTAL SCIENCES↗

Leaf C and N content by leaf age, Feb2017, PA-SLZ: Panama

This dataset contains carbon, hydrogen and nitrogen content measurements of sunlit canopy leaves of Apeiba membranacea (APEIME), Guatteria dumetorum (GUATDU), Miconia borealis (MICOBO), Terminalia amazonia (TERMAM), Virola multiflora (VIROSP) and Vochysia ferruginea (VOCHFE) species. Data was collected from the NGEE-Tropics Bosque Protector San Lorenzo (PA-SLZ) site in Panama in February of 2017 as part of the 2017 Brookhaven National Lab–Smithsonian Tropical Research Institute leaf traits by age campaign. A PDF with full sapling protocol is included in this dataset, along with metadata files in Excel file format. Data is in both CSV (Panama2017_CHN.csv) and Excel file formats. See related datasets for further sample details, leaf spectra, sap flow, leaf water potential, leaf mass per area (LMA), and gas exchange measurements.

54 ENVIRONMENTAL SCIENCES↗

Raman spectroscopy of titanomagnetites: Calibration of the intensity of Raman peaks as a sensitive indicator for their Ti content

A systematic study of the Raman spectra of the titanomagnetite solid-solution series (Fe{sub 3-x}Ti{sub x}O{sub 4}) for x = {approx}0.0, 0.2, 0.4, and 0.6 has been conducted. The samples showed combinations of five previously predicted Raman peaks at {approx}190, 310, 460, 540, and 670 cm{sup -1} that correspond to vibrational modes with T{sub 2g}(1), E{sub g}, T{sub 2g}(3), T{sub 2g}(2), and A{sub 1g}, respectively. The calibration of Raman spectra for titanomagnetite with known values of Ti concentrations reveals a strong dependence of relative intensity for the T{sub 2g}(2) and T{sub 2g}(3) modes on Ti concentration. The most prominent feature is the appearance and increase in the relative intensity of a T{sub 2g}(3) peak above x = {approx}0.2. On the other hand, the Raman peak for the T{sub 2g}(2) mode gradually diminishes as Ti increases and nearly disappears at x = {approx}0.6. Combining the two relative intensities potentially provides a sensitive indicator of Ti content. The technique was applied to study titanomagnetite in grains from Hana Volcanics and melatroctolite from Rhode Island.

Zinin, Pavel↗

LLNL-Generated Content for the California Academy of Sciences, Morrison Planetarium Full-Dome Show: 'Earthquake'

The California Academy of Sciences (CAS) Morrison Planetarium is producing a 'full-dome' planetarium show on earthquakes and asked LLNL to produce content for the show. Specifically the show features numerical ground motion simulations of the M 7.9 1906 San Francisco and a possible future M 7.05 Hayward fault scenario earthquake. The show also features concepts of plate tectonics and mantle convection using images from LLNL's G3D global seismic tomography. This document describes the data that was provided to the CAS in support of production of the 'Earthquake' show. The CAS is located in Golden Gate Park, San Francisco and hosts over 1.6 million visitors. The Morrison Planetarium, within the CAS, is the largest all digital planetarium in the world. It features a 75-foot diameter spherical section projection screen tilted at a 30-degree angle. Six projectors cover the entire field of view and give a three-dimensional immersive experience. CAS shows strive to use scientifically accurate digital data in their productions. The show, entitled simply 'Earthquake', will debut on 26 May 2012. They are working on graphics and animations based on the same data sets for display on LLNL powerwalls and flat-screens as well as for public release.

58 GEOSCIENCES↗

Decision Paper for the Disposition of FS-65 Shipping Containers, Support Equipment, and Mixed Oxide (MOX) Material Contents (Rev. 1.1)

A description of the containers, contents, and disposition alternatives follow. Table 1 provides a rough order of magnitude cost and schedule duration estimate for the 2 disposition alternatives. Cost and schedule data are rounded to two significant figures and the durations are based on 1735 working hours per year. The sub-task durations and personnel are not totaled for the tasks because many of the sub-tasks will be conducted in parallel. Once an Alternative is selected a detailed resource loaded schedule will be developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decision Paper for the Disposition of FS-65 Shipping Containers, Support Equipment, and Mixed Oxide (MOX) Material Contents (Rev. 1.2)

A description of the containers, contents, and disposition alternatives follow. Table 1 provides a rough order of magnitude cost and schedule duration estimate for the 2 disposition alternatives. Cost and schedule data are rounded to two significant figures and the durations are based on 1735 working hours per year. The sub-task durations and personnel are not totaled for the tasks because many of the sub-tasks will be conducted in parallel. Once an Alternative is selected a detailed resource loaded schedule will be developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Benchmark Imagery for Assessing Geospatial Semantic Content Extraction Algorithms -- Annual Report for FY2012

The primary objective of this project is to create a set of benchmark imagery for validating algorithms designed to extract semantic content from geospatial images of industrial facilities. The goal is not to develop algorithms but to provide images that can be used to do so. The secondary objective is to demonstrate how this imagery could be used for algorithm validation. The project is a collaborative effort between Los Alamos National Laboratory (LANL) and the Lawrence Livermore National Laboratory (LLNL).

42 ENGINEERING↗

MAGE: A Method for Estimating the Maximum Possible Chemical Energy Content of UCG Product Gas for a Multistrata Coal Zone

Underground coal gasification (UCG) provides a methodology for extracting energy from underground coal seams that are inaccessible to surface or under ground mining. UCG is a complex physical process, and many factors influence selection of sites. This report describes a novel method for estimating the up per bound on the extractable chemical energy content of UCG product gas per square meter of surface.

01 COAL, LIGNITE, AND PEAT↗

Effects of High Spinel and Chromium Oxide Crystal Contents on Simulated HLW Vitrification in DM100 Melter Tests (Final Report)

The principal objective of the work was to evaluate the effects of spinel and chromium oxide particles on WTP HLW melter operations and potential impacts on melter life. This was accomplished through a combination of crucible-scale tests, settling and rheological tests, and tests on the DM100 melter system. Crucible testing was designed to develop and identify HLW glass compositions with high waste loadings that exhibit formation of crystalline spinel and/or chromium oxide phases up to relatively high crystal contents (i.e., > 1 vol%). Characterization of crystal settling and the effects on melt rheology was performed on the HLW glass formulations. Appropriate candidate HLW glass formulations were selected, based on characterization results, to support subsequent melter tests. In the present work, crucible melts were formulated that exhibit up to about 4.4 vol% crystallization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Brief Review of Past INL Work Assessing Radionuclide Content in TMI-2 Melted Fuel Debris: The Use of 144 Ce as a Surrogate for Pu Accountancy

This report serves as a literature review of prior work performed at Idaho National Laboratory, and its predecessor organizations Idaho National Engineering Laboratory (INEL) and Idaho National Engineering and Environmental Laboratory (INEEL), studying radionuclide partitioning within the melted fuel debris of the reactor of the Three Mile Island 2 (TMI-2) nuclear power plant. The purpose of this review is to document prior published work that provides supporting evidence of the utility of using 144 Ce as a surrogate for plutonium within melted fuel debris. When the TMI-2 accident occurred no quantitative nondestructive analysis (NDA) techniques existed that could assay plutonium in the unconventional wastes from the reactor. However, unpublished work performed at INL by D. W. Akers in the late 1980s through the 1990s demonstrated that passive gamma-ray spectrometry of 144 Ce could potentially be used to develop a semi-quantitative correlation for estimating plutonium content in these materials. The fate and transport of radioisotopes in fuel from different regions of the core, including uranium, fission products, and actinides, appear to be well characterized based on the maximum temperature reached by fuel in different parts of the core and the melting point, boiling point, and volatility of those radioisotopes. Also, the chemical interactions between fuel, fuel cladding, control elements, and core structural components appears to have played a large role in determining when and how fuel relocation occurred in the core; perhaps the most important of these reaction appears to be related to the formation of mixed-material alloys, eutectics, in the fuel cladding. Because of its high melting point, low volatility, and similar chemical behavior to plutonium, the element cerium appears to have behaved similarly to plutonium during the evolution of the TMI-2 accident. Anecdotal evidence extrapolated from open-source literature strengthens this logical feasibility for using cerium, which is rather easy to analyze using passive nondestructive analysis gamma-ray spectrometry, as a surrogate for plutonium in the final analysis of TMI-2 melted fuel debris. The generation of this report is motivated by the need to perform nuclear material accountancy measurements on the melted fuel debris that will be excavated from the damaged nuclear reactors at the Fukushima Daiichi nuclear power plant in Japan, which were destroyed by the Tohoku earthquake and tsunami on March 11, 2011. Lessons may be taken from prior U.S. work related to the study of the TMI-2 core debris to support the development of new assay methods for use at Fukushima Daiichi. While significant differences exist between the two reactor systems (pressurized water reactor (TMI-2) versus boiling water reactor (FD), fresh water post-accident cooing (TMI-2) versus salt water (FD), maintained containment (TMI-2) versus loss of containment (FD)) there remain sufficient similarities to motivate these comparisons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Technical Letter Report on the Cracking of Irradiated Cast Stainless Steels with Low Ferrite Content

Crack growth rate and fracture toughness J-R curve tests were performed on CF-3 and CF-8 cast austenite stainless steels (CASS) with 13-14% of ferrite. The tests were conducted at ~320°C in either high-purity water with low dissolved oxygen or in simulated PWR water. The cyclic crack growth rates of CF-8 were higher than that of CF-3, and the differences between the aged and unaged specimens were small. No elevated SCC susceptibility was observed among these samples, and the SCC CGRs of these materials were comparable to those of CASS alloys with >23% ferrite. The fracture toughness values of unirradiated CF-3 were similar between unaged and aged specimens, and neutron irradiation decreased the fracture toughness significantly. The fracture toughness of CF-8 was reduced after thermal aging, and declined further after irradiation. It appears that while lowering ferrite content may help reduce the tendency of thermal aging embrittlement, it is not very effective to mitigate irradiation-induced embrittlement. Under a combined condition of thermal aging and irradiation, neutron irradiation plays a dominant role in causing embrittlement in CASS alloys.

36 MATERIALS SCIENCE↗

Non-destructive analysis of DU content in the NIF hohlraums

The advantage of using depleted uranium (DU) hohlraums in high-yield deuterium-tritium (DT) shots at the National Ignition Facility (NIF) is addressed by Döppner, et al., in great detail [1]. This DU based hohlraum incorporates a thin layer of DU, ~7 μm thick, on the inner surface along with a thin layer of a gold coating, ~0.7 μm thick, while the outer layer is ~22 μm thick gold. A thickness measurement of the DU layer can be performed using an optical microscope where the total DU weight can be computed provided a uniform DU layer. However, the uniformity of the thickness is not constant throughout the hohlraum since CAD drawing calculations of the DU weight do not agree with the computed values from optical measurements [2]. Therefore, a non-destructive method for quantifying the DU content in hohlraums has been established by utilizing gamma-ray spectroscopy. The details of this method, along with results from several hohlraums, are presented in this report.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Mercury Content of Sediments in East Fork Poplar Creek: Current Assessment and Past Trends

This study provided new information on sediment mercury (Hg) and monomethylmercury (MMHg) content and chemistry. The current inventory of Hg in East Fork Poplar Creek (EFPC) bed sediments was estimated to be 334 kg, which represents a ~67% decrease relative to the initial investigations in 1984. MMHg sediment inventory was estimated to be 44.1 g, lower but roughly similar to past estimates. The results support the relevance and potential impacts of other active and planned investigations within the Mercury Remediation Technology Development for Lower East Fork Poplar Creek project (e.g., assessment and control of bank soil inputs, sorbents for Hg and MMHg removal, re-introduction of freshwater clams to EFPC), and identify gaps in current understanding that represent opportunities to understand controlling variables that may inform future technology development studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Criteria for Flashback Propensity in Jet Flames for High Hydrogen Content and Natural Gas Type Fuels

Due to increasingly stringent air quality requirements stationary power gas turbines have moved to lean-premixed operation, which reduces pollutant emissions but can result in flashback. Curtailing flashback can be difficult with hydrocarbon fuels and becomes even more challenging when hydrogen is used as the fuel. In fact, flashback is a key operability issue associated with low emission combustion of high hydrogen content fuels. Flashback can cause serious damage to the premixer hardware. Hence, design tools to predict flashback propensity are of interest. Such a design tool has been developed based on the data gathered by experimental study to predict boundary layer flashback using non-dimensional parameters. The flashback propensity of a premixed jet flame has been studied experimentally. Boundary layer flashback has been investigated under turbulent flow conditions at elevated pressures and temperatures (i.e. 3 atm to 8 atm and 300 K to 500 K). The data presented in this study are for hydrogen fuel at various Reynolds numbers, which are representative of practical gas turbine premixer conditions and are significantly higher than results currently available in the literature. Three burner heads constructed of different materials (stainless steel, copper, and zirconia ceramic) were used to evaluate the effect of tip temperature, a parameter found previously to be an important factor in triggering flashback. This study characterizes flashback systematically by developing a comprehensive non-dimensional model which takes into account all effective parameters in boundary layer flashback propensity. The model was optimized for new data and captures the behavior of the new results well. Further, comparison of the model with the single existing study of high pressure jet flame flashback also indicates good agreement. The model developed using the high pressure test rig is able to predict flashback tendencies for a commercial gas turbine engine and can thus serve as a design tool for identifying when flashback is likely to occur for a given geometry and condition.

03 NATURAL GAS↗

Robust, Reliable Low Emission Gas Turbine Combustion of High Hydrogen Content Fuels

The effects of high hydrogen content fuels were studied using experimental, computational and theoretical approaches to understand the effects of mixture and state conditions on the ignition behavior of the fuels. A rapid compression facility (RCF) was used to measure the ignition delay time of hydrogen and carbon monoxide mixtures. The data were combined with results of previous studies to develop ignition regime criteria. Analytical theory and direct numerical simulation were used to validate and interpret the RCF ignition data. Based on the integrated information the ignition regime criteria were extended to non-dimensional metrics which enable application of the results to practical gas turbine combustion systems.

08 HYDROGEN↗