SEARCH · Engineering Papers

Results for “confidence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Moored surface wind observations at four sites along the Pacific equator between 140 and 95 deg W

Moored surface wind measurements were recorded along the Pacific equator at 140, 124, 110, and 95 deg W during portions of 1980-1985. Minimum record length is one year. The annual mean and monthly mean westward speeds at 110 deg W were about 1.5 m/s higher during the year preceding the 1982-1983 El Nino than in the year following this event. The annual cycle, which moved westward at about 0.8 m/s, consisted of weak westward and northward speeds in February-April and vice versa in September-October. The spectral slope between 5-day and 0.05-day periods was -1.5. The rms amplitude of the 95-percent statistically significant diurnal period oscillation was 0.3 m/s, and the meridional component was nearly twice as large as the zonal component. The diurnal period wave was coherent (at the 95-percent confidence level) between 95 and 124 deg W, with westward phase propagation of about 138 m/s. No statistically significant spectral peak was found in the 40- to 50-day intraseasonal period band. The surface zonal ocean current component, which reached approximately 0.5 and -0.5 m/s in April and October, respectively at 110 deg W, influenced the surface wind stress computed from the quadratic bulk aerodynamic formulation by 10-20 percent.

Halpern, David↗

NASA NTRS1989

Closure of the cubic tensor polynomial failure surface

An analytical method has been developed to ensure closure of the cubic form of the tensor polynomial strength criterion. The intrinsic complexity of the cubic function is such that special conditions must be met to close the failure surface in three-dimensional stress space. These requirements are derived in terms of non-intersecting conditions for asymptotes and an asymptotic plane. To demonstrate the validity of this approach, closed failure surfaces were derived for two graphite/epoxy material systems (3M SP288-T300 and IM7 8551-7). The agreement of test data with this model clearly shows that it is possible to use a higher order cubic failure theory with confidence.

Jiang, Zhiqing↗

NASA NTRS1989

The modified correlation mass method for detecting neutrino mass from astrophysical neutrino bursts

A modified correlation mass method for calculating the value of a possible neutrino mass from neutrino bursts of astrophysical origin is proposed which can more sensitively detect small neutrino masses than previous methods. Application of the method to the neutrinos detected from SN 1987 A yields a value of 3.6 + or - 0.3 eV for the neutrino mass energy with a confidence level of 97 percent. Assuming a neutrino mass of 3.6 eV, and transforming all of the detected neutrino events back to the point of emission, it is shown that bursts are composed of a short initial pulse (which lasts for about 0.1 sec and contains 30-40 percent of the total neutrinos) and an extended emission lasting for about 10 sec.

Chan, Kwing L.↗

NASA NTRS1989

Radio measurements in the fields of gamma-ray sources. III - The star formation region Rho-Ophiuchi

The star-forming region Rho-Ophiuchi, which has been detected as a COS-B gamma-ray source, 2CG 353+16, is observed in the radio continuum at wavelengths between 1.3 cm and 21 cm. Various known and new radio sources are identified. Time variability on scales of weeks to years for two sources can be assessed with high confidence levels. The H II region origin for Oph 1, Oph 6, Oph 9 and Oph 10 is ruled out. Five new radio sources are proposed as H II region candidates on the basis of their flat frequency spectrum.

Schlickeiser, R.↗

NASA NTRS1989

Testing of reliability - Analysis tools

An outline is presented of issues raised in verifying the accuracy of reliability analysis tools. State-of-the-art reliability analysis tools implement various decomposition, aggregation, and estimation techniques to compute the reliability of a diversity of complex fault-tolerant computer systems. However, no formal methodology has been formulated for validating the reliability estimates produced by these tools. The author presents three states of testing that can be performed on most reliability analysis tools to effectively increase confidence in a tool. These testing stages were applied to the SURE (semi-Markov Unreliability Range Evaluator) reliability analysis tool, and the results of the testing are discussed.

Hayhurst, Kelly J.↗

NASA NTRS1989

Transmission overhaul and replacement predictions using Weibull and renewal theory

A method to estimate the frequency of transmission overhauls is presented. This method is based on the two-parameter Weibull statistical distribution for component life. A second method is presented to estimate the number of replacement components needed to support the transmission overhaul pattern. The second method is based on renewal theory. Confidence statistics are applied with both methods to improve the statistical estimate of sample behavior. A transmission example is also presented to illustrate the use of the methods. Transmission overhaul frequency and component replacement calculations are included in the example.

Savage, M.↗

NASA NTRS1989

Experimental tests of methods for the measurement of rainfall rate using an airborne dual-wavelength radar

Several attenuation-based methods for estimating the rainfall rate were applied to measurements made by an airborne dual-wavelength radar operating at 0.87 cm, the K(a)-band, and at 3 cm, the X-band. These methods included the traditional Z-R methods, designated Z(X)-R and Z(K)-R for the X- and K(a) band wavelengths, respectively; single- and dual-wavelength surface reference techniques (SRT and DSRT, respectively); and standard dual-wavelength methods with and without range-averaging. As the primary sources of error for these methods are nearly independent, agreement among the rain rates obtained with these methods would lend confidence in the results. Correlation coefficients obtained between the rainfall rates with the Z(X)-R and DSRT methods were generally between 0.7 and 0.9. Good agreement among the methods occurred most often in stratiform rain for rain rates betwen a few mm/hr to about 15 mm/hr, i.e., where attenuation at the shorter wavelength is significant but not so severe as to result in a loss of signal.

Meneghini, R.↗

NASA NTRS1989

The orbital inclination of Cygnus XR-1 measured polarimetrically

The X-ray binary Cyg XR-1/HDE 226868 was observed polarimetrically over one orbit at three different optical wavelengths. The standard theory of Brown, et al. (1978) is used to derive an orbital inclination i = 62 deg (+5 deg, -37 deg), where the error is the 90-percent-confidence interval derived by the method of Simmons, et al. (1980). The value of the orbital inclination is significantly lower than values based on polarimetric observations. The difference is a result of the observational protocols used. A bias toward larger values of the inclination caused by the tidal distortion of the primary is still found in the present result. The inclination derived corresponds to a mass of the compact component of 6.3 solar masses, above the maximum mass of any degenerate configuration consistent with general relativity except a black hole.

Dolan, Joseph F.↗

NASA NTRS1989

New observations of a large concentration of ClO in the springtime lower stratosphere over Antarctica and its implications for ozone-depleting chemistry

New measurements of stratospheric chlorine monoxide (ClO) were made at McMurdo Station, Antarctica, during the austral spring of 1987. Rotational emission line spectroscopy, employing a ground-based detector, was used to determine mixing ratio profiles over the range about 17-45 km. A spectral band pass double that was used for similar measurements in 1986 allowed an improvement to be made in the definition of the anomalous low-altitude stratospheric ClO layer associated with springtime ozone depletion. A peak mixing ratio of 1.6 + or - 0.4 parts per billion by volume (ppbv) (95 percent confidence level) was found at 19.5 + or - 1 km at midday during the period September 20-24, 1987. The observed peak mixing ratio and diurnal behavior are discussed in relation to chemical depletion theories. Calculations indicate that the large observed ClO concentration provides an efficient closure for a catalytic Cl cycle through the ClO dimer mechanism, yielding good agreement with various observed features of O3 depletion.

De Zafra, R. L.↗

NASA NTRS1990

System Predicts Critical Runway Performance Parameters

Runway-navigation-monitor (RNM) and critical-distances-process electronic equipment designed to provide pilot with timely and reliable predictive navigation information relating to takeoff, landing and runway-turnoff operations. Enables pilot to make critical decisions about runway maneuvers with high confidence during emergencies. Utilizes ground-referenced position data only to drive purely navigational monitor system independent of statuses of systems in aircraft.

Millen, Ernest W.↗

NASA NTRS1989

The measurement of boundary layers on a compressor blade in cascade. Volume 2: Data tables

Measurements were made of the boundary layers and wakes about a highly loaded, double-circular-arc compressor blade in cascade. These laser Doppler velocimetry measurements have yielded a very detailed and precise data base with which to test the application of viscous computational codes to turbomachinery. In order to test the computational codes at off-design conditions, the data have been acquired at a chord Reynolds number of 500,000 and at three incidence angles. Average values and 95 percent confidence bands were tabularized for the velocity, local turbulence intensity, skewness, kurtosis, and percent backflow. Tables also exist for the blade static-pressure distributions and boundary layer velocity profiles reconstructed to account for the normal pressure gradient.

Zierke, William C.↗

NASA NTRS1988

Large-scale Advanced Prop-fan (LAP) high speed wind tunnel test report

High Speed Wind Tunnel testing of the SR-7L Large Scale Advanced Prop-Fan (LAP) is reported. The LAP is a 2.74 meter (9.0 ft) diameter, 8-bladed tractor type rated for 4475 KW (6000 SHP) at 1698 rpm. It was designated and built by Hamilton Standard under contract to the NASA Lewis Research Center. The LAP employs thin swept blades to provide efficient propulsion at flight speeds up to Mach .85. Testing was conducted in the ONERA S1-MA Atmospheric Wind Tunnel in Modane, France. The test objectives were to confirm that the LAP is free from high speed classical flutter, determine the structural and aerodynamic response to angular inflow, measure blade surface pressures (static and dynamic) and evaluate the aerodynamic performance at various blade angles, rotational speeds and Mach numbers. The measured structural and aerodynamic performance of the LAP correlated well with analytical predictions thereby providing confidence in the computer prediction codes used for the design. There were no signs of classical flutter throughout all phases of the test up to and including the 0.84 maximum Mach number achieved. Steady and unsteady blade surface pressures were successfully measured for a wide range of Mach numbers, inflow angles, rotational speeds and blade angles. No barriers were discovered that would prevent proceeding with the PTA (Prop-Fan Test Assessment) Flight Test Program scheduled for early 1987.

Campbell, William A.↗

NASA NTRS1989

Polarity establishment, morphogenesis, and cultured plant cells in space

Plant development entails an orderly progression of cellular events both in terms of time and geometry. There is only circumstantial evidence that, in the controlled environment of the higher plant embryo sac, gravity may play a role in embryo development. It is still not known whether or not normal embryo development and differentiation in higher plants can be expected to take place reliably and efficiently in the micro g space environment. It seems essential that more attention be given to studying aspects of reproductive biology in order to be confident that plants will survive seed to seed to seed in a space environment. Until the time arrives when successive generations of plants can be grown, the best that can be done is utilize the most appropriate systems and begin, piece meal, to accumulate information on important aspects of plant reproduction. Cultured plant cells can play an important role in these activities since they can be grown so as to be morphogenetically competent, and thus can simulate those embryogenic events more usually identified with fertilized eggs in the embryo sac of the ovule in the ovary. Also, they can be manipulated with relative ease. The extreme plasticity of such demonstrably totipotent cell systems provides a means to test environmental effects such as micro g on a potentially free-running entity. The successful manipulation and management of plant cells and propagules in space also has significance for exploitation of biotechnologies in space since such systems, perforce, are an important vehicle whereby many genetic engineering manipulations are achieved.

Krikorian, Abraham D.↗

NASA NTRS1989

Gravity receptors and responses

The overall process of gravity sensing and response processes in plants may be divided conveniently into at least four components or stages: Stimulus susception (a physical event, characteristically the input to the G receptor system of environmental information about the G force magnitude, its vector direction, or both); information perception (an influence of susception on some biological structure or process that can be described as the transformation of environmental information into a biologicallly meaningful change); information transport (the export, if required, of an influence (often chemical) to cells and organs other than those at the sensor location); and biological response (almost always (in plants) a growth change of some kind). Some analysts of the process identify, between information perception and information transport, an additional stage, transduction, which would emphasize the importance of a transformation from one form of information to another, for example from mechanical statolith displacement to an electric, chemical, or other alteration that was its indirect result. These four (or five) stages are temporally sequential. Even if all that occurs at each stage can not be confidently identified, it seems evident that during transduction and transport, matters dealt with are found relatively late in the information flow rather than at the perception stage. As more and more is learned about the roles played by plant hormones which condition the G responses, the mechanism(s) of perception which should be are not necessarily better understood. However, if by asking the right questions and being lucky with experiments perhaps the discovery of how some process (such as sedimentation of protoplasmic organelles) dictates what happens down stream in the information flow sequence may be made.

Brown, Allan H.↗

NASA NTRS1989

Bone mineral measurement using dual energy x ray densitometry

Bone mineral measurements before and after space missions have shown that weightlessness greatly accelerates bone demineralization. Bone mineral losses as high as 1 to 3 percent per month were reported. Highly precise instrumentation is required to monitor this loss and thereby test the efficacy of treatment. During the last year, a significant improvement was made in Dual-Photon Absorptiometry by replacing the radioactive source with an x ray tube. Advantages of this system include: better precision, lower patient dose, better spacial resolution, and shorter scan times. The high precision and low radiation dose of this technique will allow detection of bone mineral changes of less than 1 percent with measurements conducted directly at the sites of interest. This will allow the required bone mineral studies to be completed in a shorter time with greater confidence.

Smith, Steven W.↗

NASA NTRS1989

A candidate concept for display of forward-looking wind shear information

A concept is proposed which integrates forward-look wind shear information with airplane performance capabilities to predict future airplane energy state as a function of range. The information could be displayed to a crew either in terms of energy height or airspeed deviations. The anticipated benefits of the proposed display information concept are: (1) a wind shear hazard product that scales directly to the performance impact on the airplane and that has intuitive meaning to flight crews; (2) a reduction in flight crew workload by automatic processing of relevant hazard parameters; and (3) a continuous display of predicted airplane energy state if the approach is continued. Such a display may be used to improve pilot situational awareness or improve pilot confidence in wind shear alerts generated by other systems. The display is described and the algorithms necessary for implementation in a simulation system are provided.

Hinton, David A.↗

NASA NTRS1990

On protection of Freedom's solar dynamic radiator from the orbital debris environment. Part 1: Preliminary analyses and testing

A great deal of experimentation and analysis was performed to quantify penetration thresholds of components which will experience orbital debris impacts. Penetration was found to depend upon mission specific parameters such as orbital altitude, inclination, and orientation of the component; and upon component specific parameters such as material, density and the geometry particular to its shielding. Experimental results are highly dependent upon shield configuration and cannot be extrapolated with confidence to alternate shield configurations. Also, current experimental capabilities are limited to velocities which only approach the lower limit of predicted orbital debris velocities. Therefore, prediction of the penetrating particle size for a particular component having a complex geometry remains highly uncertain. An approach is described which was developed to assess on-orbit survivability of the solar dynamic radiator due to micrometeoroid and space debris impacts. Preliminary analyses are presented to quantify the solar dynamic radiator survivability, and include the type of particle and particle population expected to defeat the radiator bumpering (i.e., penetrate a fluid flow tube). Results of preliminary hypervelocity impact testing performed on radiator panel samples (in the 6 to 7 km/sec velocity range) are also presented. Plans for further analyses and testing are discussed. These efforts are expected to lead to a radiator design which will perform to requirements over the expected lifetime.

Rhatigan, Jennifer L.↗

NASA NTRS1989

Connectionist model-based stereo vision for telerobotics

Autonomous stereo vision for range measurement could greatly enhance the performance of telerobotic systems. Stereo vision could be a key component for autonomous object recognition and localization, thus enabling the system to perform low-level tasks, and allowing a human operator to perform a supervisory role. The central difficulty in stereo vision is the ambiguity in matching corresponding points in the left and right images. However, if one has a priori knowledge of the characteristics of the objects in the scene, as is often the case in telerobotics, a model-based approach can be taken. Researchers describe how matching ambiguities can be resolved by ensuring that the resulting three-dimensional points are consistent with surface models of the expected objects. A four-layer neural network hierarchy is used in which surface models of increasing complexity are represented in successive layers. These models are represented using a connectionist scheme called parameter networks, in which a parametrized object (for example, a planar patch p=f(h,m sub x, m sub y) is represented by a collection of processing units, each of which corresponds to a distinct combination of parameter values. The activity level of each unit in the parameter network can be thought of as representing the confidence with which the hypothesis represented by that unit is believed. Weights in the network are set so as to implement gradient descent in an energy function.

Hoff, William↗