Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “collocated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Development of a Multi-Phase Mission Planning Tool for NASA X-57 Maxwell

The physical design and operation of electric aircraft like NASA Maxwell X-57 are significantly different than conventionally fueled aircraft. Operational optimization will require close coupling of aerodynamics, propulsion, and power. To address the uncertainty of electric aircraft operation, a system level Mission Planning Tool is developed to simulate all aircraft trajectory phases: taxi, motor run-up, takeoff, climb, cruise, and descent. The Mission Planning Tool captures performance parameters at each point of the trajectory including battery state of charge, the temperatures of components in the electrical system, and propulsion system thrust. This work describes the modeling of each mission phase, and compares the results of simulating a user-specified trajectory, and using a collocated optimal control approach to determine an optimal trajectory. The results show that optimization of the mission show a significant increase in the final battery state of charge over the user- specified simulation strategy. These results will inform the operation of the NASA Maxwell X-57 test flights that will take place this year.

Schnulo, Sydney L.↗
NASA NTRS2018

Validation of MODIS 3 km Land Aerosol Optical Depth from NASA's EOS Terra and Aqua Missions

In addition to the standard resolution product (10km), the MODerate resolution Imaging Spectroradiometer (MODIS) Collection 6 (C006) data release included a higher resolution (3km). Other than accommodations for the two different resolutions, the 10 and 3km Dark Target (DT) algorithms are basically the same. In this study, we perform global validation of the higher-resolution aerosol optical depth (AOD) over global land by comparing against AErosol RObotic NETwork (AERONET) measurements. The MODIS-AERONET collocated data sets consist of 161410 high-confidence AOD pairs from 2000 to 2015 for Terra MODIS and 2003 to 2015 for Aqua MODIS. We find that 62.5 and 68.4% of AODs retrieved from Terra MODIS and Aqua MODIS, respectively, fall within previously published expected error bounds of +/-(0.05+0.2 × AOD), with a high correlation (R = 0.87). The scatter is not random, but exhibits a mean positive bias of ∼ 0.06 for Terra and ∼ 0.03 for Aqua. These biases for the 3km product are approximately 0.03 larger than the biases found in similar validations of the 10km product. The validation results for the 3km product did not have a relationship to aerosol loading (i.e., true AOD), but did exhibit dependence on quality flags, region, viewing geometry, and aerosol spatial variability. Time series of global MODIS-AERONET differences show that validation is not static, but has changed over the course of both sensors' lifetimes, with Terra MODIS showing more change over time. The likely cause of the change of validation over time is sensor degradation, but changes in the distribution of AERONET stations and differences in the global aerosol system itself could be contributing to the temporal variability of validation.

Gupta, Pawan↗
NASA NTRS2018

Dynamics and Control of a Tethered Enhanced Gravity Tractor Performing Asteroid Deflection

The dynamics and control of an Enhanced Gravity Tractor (EGT) augmented with a tether for deflecting an asteroid are studied. A conventional EGT consists of collected asteroidal mass collocated with the spacecraft. Because of the presence of a tether, the collected mass is placed where the EGT would have been without a tether, and the spacecraft is placed farther away from the asteroid. Doing so improves the fuel efficiency and safety margin of the EGT operation without significantly sacrificing the gravitational attraction between the asteroid and the EGT. The tether is modeled as a series of particles connected by spring-dashpot systems. Physical properties of the tether are selected to be similar to those of the SPECTRA-1000, Kevlar-29, and Kevlar-49 fibers. It is assumed that control is applied only to the spacecraft, and there is no active control associated with the collected mass. A Proportional-Derivative (PD) controller is employed to maintain the spacecraft and the collected mass at desired positions relative to the asteroid. Numerical simulations of tethered EGT operations at 2008 EV5, Itokawa, Apophis, and a fictitious ellipsoidal asteroid are performed. It is demonstrated that a PD controller is capable of accomplishing the control objectives. The gravity gradient and the control force keep the tether stretched throughout a normal tethered EGT operation, and the load on the tether is well within the design limit of the tether material. While including multiple particles in the tether model is essential in capturing details of tether vibration, the number of particles does not significantly affect the motions of the collected mass and the spacecraft. In addition, the distance from the asteroid mass center to the collected mass should be chosen judiciously in the case of a rotating slender asteroid; some distance ranges should be avoided as excessive lateral oscillations can be excited by resonance between the asteroid rotation and tether pendular motion.

Shen, Haijun↗
NASA NTRS2017

Cumulus: NASA's Cloud Based Distributed Active Archive Center Prototype

NASAs Earth Science Data System (ESDS) Program serves as a central cog in order to facilitate the implementation of NASA's Earth Science strategic plan. Since 1994, the ESDS Program has committed to the full and open sharing of Earth science data obtained from NASA instruments to all users. One of the key responsibilities of the ESDS Program is to continuously evolve the entire data and information system to maximize returns on the collected NASA data. An independent review was conducted in 2015 to holistically review the EOSDIS in order to identify gaps. The review recommendations were to investigate two areas: one, whether commercial cloud providers offer potential for storage, processing, and operational efficiencies, and two, the potential development of new data access and analysis paradigms. In response, ESDS has initiated several prototypes investigating the advantages and risks of leveraging cloud computing. This paper describes one such prototyping activity named Cumulus. Cumulus is being designed and developed as a "native" cloud-based data ingest, archive and management system that can be used for all future NASA Earth science data streams. Cumulus will foster design of new analysisvisualization tools that can leverage collocated data from all of the distributed DAACs as well as elastic cloud computing resources.

Earth Science Informatics↗
NASA NTRS2018

New Neural Network Cloud Mask Algorithm Based on Radiative Transfer Simulations

Cloud detection and screening constitute critically important first steps required to derive many satellite data products. Traditional threshold-based cloud mask algorithms require a complicated design process and fine tuning for each sensor, and they have difficulties over areas partially covered with snow/ice. Exploiting advances in machine learning techniques and radiative transfer modeling of coupled environmental systems, we have developed a new, threshold-free cloud mask algorithm based on a neural network classifier driven by extensive radiative transfer simulations. Statistical validation results obtained by using collocated CALIOP and MODIS data show that its performance is consistent over different ecosystems and significantly better than the MODIS Cloud Mask (MOD35 C6) during the winter seasons over snow-covered areas in the mid-latitudes. Simulations using a reduced number of satellite channels also show satisfactory results, indicating its flexibility to be configured for different sensors. Comparedto threshold-based methods and previous machine-learning approaches, this new cloud mask (i) does not rely on thresholds, (ii) needs fewer satellite channels, (iii) has superior performance during winter seasons in mid-latitude areas, and (iv) can easily be applied to different sensors.

cloud mask algorithms↗
NASA NTRS2018

Lightning Enriched Global Precipitation Feature Database

The Tropical Rainfall Measurement Mission (TRMM) has provided a wealth of insight about lightning and precipitation in the tropics. However TRMM did not provide coverage outside the tropics and sub-tropics (i.e., beyond ±38°latitude), and hence it was unable to sample the lightning activity and precipitation features over a large fraction of mid-latitude continents and oceans, including extratropical cyclone storm tracks. The Global Precipitation Measurement (GPM) mission picks up where TRMM left off in that it provides information on precipitation features in the mid-and high latitudes (up to 65°N/S). However, GPM lacks a lightning instrument that can provide additional insights into mid-latitude thunderstorm activity and distribution. Hence we integrate observations from coincident the ISS Lightning Imaging Sensor (LIS) and the World Wide Lightning Location Network (WWLLN) observations with measurements from the GPM constellation of satellites, in particular to extend the existing GPM Precipitation Feature (PF) database so its data parameters are similar to that of the TRMM PF database (i.e., precipitation + lighting). Currently, WWLLN and ISS-LIS lightning have been collocated into precipitation features defined from GPM core satellite and constellation satellites observations.

Precipitation↗
NASA NTRS2019

Temporal Characterization of Dust Activity in the Central Patagonia Desert (years 1964-2017)

Like a peninsula into the Southern Ocean, the vast Patagonia desert in the southern tip of South America is exposed to extreme winds. Dust blown from this region has important impacts thousands of kilometers away, but these impacts are very difficult to assess. Questions such as the sources of dust found in snow in East Antarctica as well as the provenance of nutrients in the Southern Ocean remain unanswered. While the Patagonia desert is the likely source of dust, there is a dearth of observational records of dust activity from this desert. This study fills the gap in observations by providing a record of 50 years of surface and satellite observations of the largest and most active dust source in Patagonia: lake Colhu Huapi. The seasonality, frequency and periods of major dust activity are identified from meteorological records at a station located 100km downwind from the lake. Collocated satellite observations confirmed the major periods of dust activity in the last 30 years. This dataset provides information on how to interpret records of recent dust found in East Antarctica snow as well as help to understand the CO2 cycle in the Southern Ocean.

Patagonia↗
NASA NTRS2018

MISR-GOES 3D Winds: Implications for Future LEO-GEO and LEO-LEO Winds

Global wind observations are fundamental for studying weather and climate dynamics and for operational forecasting. Most wind measurements come from atmospheric motion vectors (AMVs) by tracking the displacement of cloud or water vapor features. These AMVs generally rely on thermal infrared (IR) techniques for their height assignments, which are subject to large uncertainties in the presence of weak or reversed vertical temperature gradients near the planetary boundary layer (PBL)and tropopause folds. Stereo imaging can overcome the height assignment problem using geometric parallax for feature height determination. In this study we develop a stereo 3D-Wind algorithm to simultaneously retrieve AMV and height from geostationary (GEO) and low Earth orbit (LEO) satellite imagery and apply it to collocated Geostationary Operational Environmental Satellite (GOES)and Multi-angle Imaging SpectroRadiometer (MISR) imagery. The new algorithm improves AMV and height relative to products from GOES or MISR alone, with an estimated accuracy of <0.5 m/s in AMV and <200 m in height with 2.2 km sampling. The algorithm can be generalized to other LEO-GEO or LEO-LEO combinations for greater spatiotemporal coverage. The technique demonstrated with MISR and GOES has important implications for future high-quality AMV observations, for which a low-cost constellation of CubeSats can play a vital role.

MISR↗
NASA NTRS2019

Improving Surface Soil Moisture Estimates in West Africa Through GRACE Data Assimilation

Recent annual trends of precipitation and terrestrial water storage (TWS) in West Africa have been increasing over the past decade. Despite a significant impact of soil moisture on the TWS in West Africa, there is little research on the recent spatial and temporal behaviors of surface soil moisture (SSM) along with the hydrological trends and variability in West Africa. In this study, we assimilate TWS estimates from the Gravity Recovery and Climate Experiment (GRACE) mission into the Catchment Land Surface Model (CLSM) and evaluate its impacts on SSM simulations for the years, 2002–2017. The evaluation is performed using reference datasets: the African Monsoon Multidisciplinary Analysis (AMMA) in situ soil moisture observations, three currently available microwave satellite SSM observations from the Advanced Scatterometer (ASCAT), the Soil Moisture Ocean Salinity (SMOS), and the Soil Moisture Active Passive (SMAP) satellites and also the triple collocation analysis (TCA). Overall, modeled SSM shows good agreement with the reference datasets in terms of the anomaly SSM correlations. However, both modeled and ASCAT SSM are limited in their representation of the drying rates, as observed by ground observations, SMOS and SMAP estimates. Further, GRACE data assimilation results in improved SSM simulations in the humid regions with large annual TWS variability. This study demonstrates the utility of land data assimilation to inform hydrological conditions in West Africa, where soil moisture monitoring is necessary for water resource and livestock management.

West Africa↗
NASA NTRS2018

CALIPSO Lidar Calibration at 532 nm: Version 4 Nighttime Algorithm

Data products from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) were recently updated following the implementation of new (version 4) calibration algorithms for all of the level 1 attenuated backscatter measurements. In this work we present the motivation for and the implementation of the version 4 nighttime 532 nm parallel channel calibration. The nighttime 532 nm calibration is the most fundamental calibration of CALIOP data, since all of CALIOP’s other radiometric calibration procedures – i.e., the 532 nm daytime calibration and the 1064 nm calibrations during both nighttime and daytime – depend either directly or indirectly on the 532 nm nighttime calibration. The accuracy of the 532 nm nighttime calibration has been significantly improved by raising the molecular normalization altitude from 30-34 km to 36-39 km to substantially reduce stratospheric aerosol contamination. Due to the greatly reduced molecular number density and consequently reduced signal-to-noise ratio (SNR) at these higher altitudes, the signal is now averaged over a larger number of samples using data from multiple adjacent granules. As well, an enhanced strategy for filtering the radiation-induced noise from high energy particles was adopted. Further, the meteorological model used in the earlier versions has been replaced by the improved MERRA-2 model. An aerosol scattering ratio of 1.01 ± 0.01 is now explicitly used for the calibration altitude. These modifications lead to globally revised calibration coefficients which are, on average, 2-3% lower than in previous data releases. Further, the new calibration procedure is shown to eliminate biases at high altitudes that were present in earlier versions and consequently leads to an improved representation of stratospheric aerosols. Validation results using airborne lidar measurements are also presented. Biases relative to collocated measurements acquired by the Langley Research Center (LaRC) airborne high spectral resolution lidar (HSRL) are reduced from 3.6% ± 2.2% in the version 3 data set to 1.6% ± 2.4 % in the version 4 release.

Jayanta Kar↗
NASA NTRS2019

Evaluation Analysis of NASA SMAP L3 and L4 and SPoRT-LIS Soil Moisture Data in the United States

Soil moisture has a critical role in the development, frequency and persistence of climatic and hydrologic extremes such as drought, heat wave and flooding events. In situ soil moisture data are uneven and sparse in time and space. This highlights the need to utilize other soil moisture sources to fill this spatiotemporal gap. The goal of this study is to validate one satellite-based and two model-based soil moisture datasets with in situ data across the United States. Soil moisture information from the Soil Moisture Active Passive (SMAP) enhanced level 3 (L3) (SMAP L3) and modeled level 4 (L4) (SMAP L4) data at 9-km resolution and Short-term Prediction Research and Transition-Land Information System (SPoRT-LIS) modeled at 3-km resolution were selected for evaluation. SPoRT-LIS is a near real-time, high resolution operational land analysis data. Ground-based data were obtained from the North American Soil Moisture Database (NASMD) for 362 stations. Seven statistical indicators including anomaly, Spearman, and Pearson correlation coefficients, the systematic error (Bias), root mean square error (RMSE), unbiased root mean square error (ubRMSE), and normalized standard deviation (SDV) were used to evaluate the satellite- and model-derived soil moisture data. In addition, the triple collocation (TC) error model was used to measure the error among SMAP L4, SPoRT-LIS and ground-based data. This study assesses which satellite or modeled dataset is most appropriate for specific times and locations to use as a surrogate for in situ observations. Temporal and spatial analysis demonstrated that, overall, SMAP L4 performed better than SMAP L3 and SPoRT-LIS. Strong agreement was observed between SMAP L4 and in situ observations (ρ = 0.53, Bias = −0.006) in all seasons and most regions with various land covers, especially in winter and in the central regions of the United States. For croplands, SMAP L4 presented the best agreement with in situ data, analyzing all period (ρ = 0.60) and non-winter period (ρ = 0.61) separately.

Tavakol, Ameneh↗
NASA NTRS2019

Use of Polarimetric Radar Measurements to Constrain Simulated Convective Cell Evolution: A Pilot Study with Lagrangian Tracking

To probe the potential value of a radar-driven field campaign to constrain simulation of isolated convection subject to a strong aerosol perturbation, convective cells observed by the operational KHGX weather radar in the vicinity of Houston, Texas, are examined individually and statistically. Cells observed in a single case study of onshore flow conditions during July 2013 are first examined and compared with cells in a regional model simulation. Observed and simulated cells are objectively identified and tracked from observed or calculated positive specific differential phase (K(sub DP)) above the melting level, which is related to the presence of supercooled liquid water. Several observed and simulated cells are subjectively selected for further examination. Below the melting level, we compare sequential cross sections of retrieved and simulated raindrop size distribution parameters. Above the melting level, we examine time series of KDP and radar differential reflectivity (Z(sub DR)) statistics from observations and calculated from simulated supercooled rain properties, alongside simulated vertical wind and supercooled rain mixing ratio statistics. Results indicate that the operational weather radar measurements offer multiple constraints on the properties of simulated convective cells, with substantial value added from derived K(sub DP) and retrieved rain properties. The value of collocated three-dimensional lightning mapping array measurements, which are relatively rare in the continental US, supports the choice of Houston as a suitable location for future field studies to improve the simulation and understanding of convective updraft physics. However, rapid evolution of cells between routine volume scans motivates consideration of adaptive scan strategies or radar imaging technologies to amend operational weather radar capabilities. A 3-year climatology of isolated cell tracks, prepared using a more efficient algorithm, yields additional relevant information. Isolated cells are found within the KHGX domain on roughly 40 % of days year-round, with greatest concentration in the northwest quadrant, but roughly 5-fold more cells occur during June through September. During this enhanced occurrence period, the cells initiate following a strong diurnal cycle that peaks in the early afternoon, typically follow a south-to-north flow, and dissipate within 1 h, consistent with the case study examples. Statistics indicate that ∼ 150 isolated cells initiate and dissipate within 70 km of the KHGX radar during the enhanced occurrence period annually, and roughly 10 times as many within 200 km, suitable for multi-instrument Lagrangian observation strategies. In addition to ancillary meteorological and aerosol measurements, robust vertical wind speed retrievals would add substantial value to a radar-driven field campaign.

Fridlind, Ann M.↗
NASA NTRS2016

A Multi-Sensor Water Vapor, Temperature and Cloud Climate Data Record: Status of Our MEaSUREs 2012 Project

- Our primary objectives: Incorporate all A-Train water vapor, including small-scale, horizontal and vertical water vapor structure from MODIS (Moderate Resolution Imaging Spectroradiometer) and GPS (Global Positioning System); Use MODIS cloud classification that is collocated at the pixel-scale over the full AIRS/AMSU (Atmospheric Infrared Sounder/Advanced Microwave Sounding Unit) swath; Extend summaries to PDFs (Probability Distribution Functions)/higher order moments of water vapor sorted by cloud classes; Establish robust, scale-dependent statistical relationships between cloud, temperature, and water vapor PDFs for the climate modeling community. - We will also: Update our current data record to new CloudSat/CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) cloud classification; Provide merged AIRS and MLS (Microwave Limb Sounder) water vapor profiles using averaging kernels; Include temperature and water vapor from models (ECMWF - European Centre for Medium-Range Weather Forecasts) and re-analyses (MERRA - Modern Era-Retrospective Analysis for Research and Applications); Classify METOP-A (Meteorological Operational Satellite-A) and NOAA (National Oceanic and Atmospheric Administration) satellite water vapor with AVHRR (Advanced Very High Resolution Radiometer) during SNOs (Solar Neutrino Oscillations); Compare with the NVAP-M (re-analysis and extension of the NASA Water Vapor Project (NVAP)) water vapor climatologies; Use existing data sources and mature algorithms, and document processing algorithms.

Fetzer, Eric↗
NASA NTRS2019

DSCOVR-EPIC MAIAC AOD - A Proxy for Understanding Aerosol Diurnal Patterns from Space

The Deep Space Climate Observatory (DSCOVR) spacecraft was launched on 11 February 2015 and in June 2015 achieved its orbit at the first Lagrange point (L1), 1.5 million km from Earth toward the sun. The Earth Polychromatic Imaging Camera (EPIC) onboard DSCOVR views the entire sunlit Earth from sunrise to sunset, every 1-2 hours, at scattering angles between 168.5° and 175.5° with 10 narrowband filters in the range of 317-779 nm. NASA Multiangle Implementation of Atmospheric Correction (MAIAC) algorithm, originally developed for MODIS, has been applied to EPIC data with an Aerosol Optical Depth (AOD) product at 440nm with a 10km spatial resolution. This high temporal resolution product is a unique dataset for investigating diurnal patterns in aerosols from space. Our work analyzed the capability of the satellite-borne data to capture the aerosol diurnal variation by associating it with AERONET AOD at 440nm data over the contiguous US. We validated the DSCOVR MAIAC AOD data over 100 AERONET stations during 2015-2018, and examined the contribution of the surface reflectance and relevant acquisition angles, derived by the MAIAC algorithm, to the predicted error. We used over 180,000 hourly DSCOVR-EPIC MAIAC AOD observations with collocated with AERONET AOD observations averaged over +-30 minutes from the satellite overpass time. The AERONET and DSCOVR AOD temporal patterns show that the diurnal variation is different across US AERONET sites, with higher diurnal variation in the DSCOVR dataset in general.

Sorek-Hamer, Meytar↗
NASA NTRS2018

Multifidelity Uncertainty Quantification of a Commercial Supersonic Transport

The objective of this work was to develop a multifidelity uncertainty quantification approach for efficient analysis of a commercial supersonic transport concept. An approach based on point-collocation, non-intrusive polynomial chaos was formulated in which a low-fidelity model could be corrected using multiple higher-fidelity models. The formulation and methodology also allows for the addition of uncertainty sources not present in the lower fidelity models. To demonstrate the applicability and potential computational savings of the multifidelity polynomial chaos approach, two model problems were explored. The first was a supersonic airfoil with three levels of modeling fidelity, each capturing a gradual increase in modeling of the underlying flow physics. As much as 50% computational cost reduction was observed using the mutlifidelity approach, while predicting nearly the same amount of uncertainty in drag. The second problem was a commercial supersonic transport. This model had three levels of fidelity that included two different modeling approaches and the addition of physics between the fidelity levels. Results of this analysis yielded nearly a 70% computational savings to predict a comparable amount of uncertainty in ground noise. Both problems illustrate the applicability and significant computational savings of the multifidelity method for efficient and accurate uncertainty quantification.

Thomas K. West IV↗
NASA NTRS2017

An Analysis of Coordinated Observations from NOAA's Ronald Brown Ship and G-IV Aircraft in a Landfalling Atmospheric River over the North Pacific During CalWater-2015

To gain a more complete observational understanding of atmospheric rivers (ARs) over the data-sparse open ocean, we used a diverse suite of mobile observing platforms deployed on NOAAs Ronald H. Brown (RHB) research vessel and G-IV research aircraft during the CalWater-2015 field campaign to describe the structure and evolution of a long-lived AR modulated by six frontal waves over the northeastern Pacific on 20-25 January 2015. Satellite observations and reanalysis diagnostics provided synoptic-scale context, illustrating the warm, moist southwesterly airstream within the quasi-stationary AR situated between an upper-level trough and ridge. The AR remained offshore of the U.S. West Coast but made landfall across British Columbia where heavy precipitation fell. Forty-seven rawinsondes launched from the RHB provided a comprehensive thermodynamic and kinematic depiction of the AR, including uniquely documenting an upward intrusion of strong water-vapor transport in the low-level moist southwesterly flow during the passage of frontal waves 2 through 6. A collocated 1290-MHz wind profiler showed an abrupt frontal transition from southwesterly to northerly flow below 1 km MSL coinciding with the tail-end of AR conditions. Shipborne radar and disdrometer observations in the AR uniquely captured key microphysical characteristics of shallow warm rain, convection, and deep mixed-phase precipitation. Novel observations of sea-surface fluxes in a midlatitude AR documented persistent ocean-surface evaporation and sensible-heat transfer into the ocean. The G-IV aircraft flew directly over the ship, with dropsonde and radar spatial analyses complementing the temporal depictions of the AR from the RHB. The AR characteristics varied, depending on the location of the cross section relative to the frontal waves.

atmospheric rivers↗
NASA NTRS2016

Observation-Based Cloud Radiative Kernels from A-Train

We develop a method to empirically derive broadband and spectral cloud radiative kernels by cloud type from pixel-scale collocated A-Train observations and reanalysis, which does not require additional cloudy radiative transfer calculations nor cloud properties. This method is able to estimate the cloud feedback by maintaining the consistency between CRKs and cloud responses.

Yue, Qing↗
NASA NTRS2019

Harmony: Bringing Data Together by Bringing Services Together

As Earth observation data volume, velocity, and variety continues to accelerate, so do the challenges of working with those data. The computation, storage, and network transfer requirements for multi-petabyte datasets demand solutions that allow users to process, store, and move fewer bytes while still finding the valuable insights they seek. Our cloud-based data transformation framework, Harmony, tackles these challenges by providing consistent, standards-based interface to multiple disparate backend processors collocated with NASA EOSDIS data. It allows data scientists to perform data processing and harmonization activities across many datasets through familiar tooling. Simultaneously, it provides a clear, consistent interface for data providers to expose new or customized backend services for their data. This talk will discuss Harmony, its architecture and interface, and the path forward for cloud-based NASA EOSDIS data harmonization services.

Quinn, Patrick↗