Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attribute measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Anomalous Loss Reduction Below Two‐Level System Saturation in Aluminum Superconducting Resonators

Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the dissipation due to two-level systems (TLS) which become the dominant source of loss in the few-photon and low temperature regime. In this study, capacitively-coupled aluminum half-wavelength coplanar waveguide resonators are investigated. Surprisingly, the loss of the resonators is observed to decrease with a lowering temperature at low excitation powers and temperatures below the TLS saturation. This behavior is attributed to the reduction of the TLS resonant response bandwidth with decreasing temperature and power to below the detuning between the TLS and the resonant photon frequency in a discrete ensemble of TLS. When response bandwidths of TLS are smaller than their detunings from the resonance, the resonant response and thus the loss is reduced. At higher excitation powers, the loss follows a logarithmic power dependence, consistent with predictions from the generalized tunneling model (GTM). A model combining the discrete TLS ensemble with the GTM is proposed and matches the temperature and power dependence of the measured internal loss of the resonator with reasonable parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rotational coherence dominates early-time dynamics and produces long-time revivals in the S 2 state of azulene

Here, the ultrafast dynamics of azulene have been debated for decades, with reported picosecond decay constants variously attributed to intramolecular vibrational redistribution (IVR), internal conversion, or rotational dephasing. Using polarization- and femtosecond time-resolved resonance-enhanced multiphoton ionization spectroscopy with a nanosecond delay window, we disentangle this long-standing inconsistency and show that the early 2–5 ps decay component arises entirely from the rotational dephasing of an excited-state wavepacket. Identical time constants extracted from the decay of the parallel signal and the rise of the perpendicular signal across multiple vibronic origins provide an unambiguous rotational anisotropy signature, eliminating the need for IVR-based interpretations. Extending the measurement window to 1.3 ns reveals well-structured J-type and C-type rotational coherence revivals in S 2 azulene on top of the well-documented fluorescence decay, demonstrating that both the short- and long-time dynamics contain information about the coherent rotational dynamics. These results show that azulene, and by extension polycyclic aromatic hydrocarbons, can sustain structured rotational coherence deep into the nanosecond regime, positioning PAHs as model systems for quantum-coherent wavepacket dynamics and providing a framework for probing coherence, decoherence, and rotational control in electronically rich molecular systems.

Zhan, Jie [University of Georgia, Athens, GA (Unit↗

Measurements of radial neutral density profiles from Balmer- α emission in Wendelstein 7-X

Radial neutral density profiles are estimated from measurements of passive H α emission in the Wendelstein 7-X stellarator. To parametrize the generally three-dimensional distribution with a low number of degrees of freedom, the neutral density is reduced to a flux surface quantity. Accounting for emission from excitation and recombination processes, neutral density profiles are derived independently for each of the available lines of sight. Density profiles obtained from the different viewing geometries are found to vary within one order of magnitude. Toroidally oriented lines of sight predict systematically lower neutral densities when compared to poloidally oriented ones. This discrepancy is attributed to the simplifications inherent in the imposed model and significant differences in integration volumes across the viewing geometries. In line with expectations, obtained neutral densities are found to decrease with increasing plasma density. Key restrictions of the model include the reduction of the neutral density to a flux surface quantity, uncertainties in the plasma profiles and instrument function, and line integration effects outside the last closed flux surface.

Wendelstein 7-X↗

Dynamical origins of weakly coupled relaxor behavior in Sn-doped (Ba,Ca)TiO 3 -BiScO 3

The peculiar characteristics of relaxors, viz., a frequency-dependent dielectric permittivity peak and good functional properties (dielectric, electromechanical, electrocaloric, etc.), are attributed to nanoscale regions with correlated dipoles, or polar nanoregions (PNRs). However, the exact nature of PNRs and their contribution to relaxor behavior remains debatable. In recent years, solid solutions of BaTiO3-BiMeO3 (where Me is a metal), have emerged as an interesting system with characteristics in between that of relaxors and dipole glasses. Here, we have examined the atomistic origins of weakly coupled relaxor behavior, specifically with regard to formation of PNRs, in Sn-doped (1-x)(Ba,Ca)TiO 3-x BiScO 3 using macroscopic polarization and neutron dynamic pair distribution function measurements. We show that the short-range atomic correlations observed within the PNRs dynamically fluctuate with frequencies of the order of THz. Furthermore the composition-dependent dielectric and polarization behaviors are critically influenced by the relative stability of the atomic correlations near ~1 THz, while the instantaneous atomic correlations are largely independent of x. The current results are discussed based on a model of intrinsic local modes distributed in a dielectrically soft matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impacts of irradiation-induced nanostructure on phonon linewidths and thermal conductivity in U-Zr alloy

Ion irradiation can significantly change material properties. Thermal conductivity degradation of reactor fuel is detrimental to safety and efficiency—driving research on how irradiation impacts heat-carrying phonons. Here, we report the measurements of phonon dispersion and lifetimes (inverse linewidths) in freestanding irradiated crystals and reveal the relationship between thermal conductivity and proton irradiation induced nanostructures in UZr 2.6 using inelastic x-ray scattering, electron microscopy, modulated thermoreflectance, and first-principles calculations. Irradiation results in more significant increases in phonon linewidths and decreased thermal conductivity in the basal plane than that along the c axis, decreasing thermal conductivity anisotropy. Furthermore, microscopy reveals that this results from irradiation induced nanoprecipitates and metastable phase separation. Surprisingly, irradiation leads to smaller phonon linewidths near some zone boundaries, which we attribute to irradiation induced short-range order.

36 MATERIALS SCIENCE↗

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

36 MATERIALS SCIENCE↗

Characterization of Flashback and Flame-Holding in a Jet-in-Crossflow Mixing Configuration With Methane–Hydrogen Fuel Blends

An approach that combines experimental and numerical analyses has been implemented to characterize the fundamentals of flashback events and flame-holding phenomena during high-hydrogen combustion in a jet-in-crossflow (JICF) configuration. Such flame dynamics are visualized experimentally using nanosecond (ns)-based hydroxyl planar laser-induced fluorescence (OH-PLIF) and chemiluminescence diagnostics techniques. The JICF burner has an optically accessible premixing tube allowing the optical diagnostics. The testing was conducted for varied premixer velocities (V) and equivalence ratio (ϕ) for 90–100% (H 2 , by mole) H 2 /CH 4 reactant mixtures at atmospheric temperature and pressure conditions. Two distinct flashback events were identified – conventional rich flashback and lean flashback, recorded while increasing ϕ and decreasing ϕ, respectively. The cause of lean flashback was attributed to lower momentum flux ratio which bends the jet sharply, closer toward the injection plane. The mean OH-PLIF images characterized the flame-holding behavior, where the flame was found to be stabilized on the leeward side only or on both windward and leeward sides as a lifted flame near the fuel port. A large eddy simulation (LES) with detailed chemistry combustion modeling approach was implemented along with an OH* submechanism, and it showed qualitative agreement with the integrated line-of-sight chemiluminescence results as well as the planar OH-PLIF measurements.

chemiluminescence diagnostic↗

Observed Variability in Convective Cell Characteristics and Near-Storm Environments across the Sea- and Bay-Breeze Fronts in Southeast Texas

Abstract During the DOE Atmospheric Radiation Measurement (ARM) Tracking Aerosol Convection Interactions Experiment (TRACER) IOP spanning June–September 2022, two fixed ARM sites and a mobile team concurrently sampled the airmass heterogeneity across sea- and bay-breeze fronts around the greater Houston metropolitan region. Here, we quantify the spatiotemporal variability between maritime (coastal/bay side of breeze fronts) and continental (inland side of breeze fronts) air masses over 15 IOP days characterized by strong sea-breeze forcing. We analyze environmental profile data from 177 radiosondes and use S- and C-band radar data to track and quantify the variability in attributes of more than 2300 shallow and transitioning cells across different air masses. The composite analysis of environmental profiles indicates that during the early afternoon, the sea-breeze maritime air mass exhibits lower convective available potential energy (CAPE) than the bay-breeze maritime air mass. As the sea breeze advances inland with time, CAPE within the maritime air mass exceeds that of the continental air mass to the north of the breeze fronts. In general, maritime cells have a larger mean composite reflectivity and cell widths than continental cells; however, the response varies between shallow and transitioning cells. Mean composite 20-dB Z echo-top heights, however, are similar across air masses for both shallow and transitioning cells. The continental and maritime inflow air mass for transitioning cells has significantly different mean values for mixed-layer entrainment CAPE, lifted condensation level, level of free condensation, boundary layer depth, and diluted equilibrium level. For shallow cells, only total precipitable water shows a significant difference. Significance Statement The greater Houston metropolitan area is a natural laboratory for understanding the individual impacts of background meteorology and aerosols on convective clouds. Due to its proximity to the Gulf Coast and Galveston Bay, the Houston region experiences a diurnal precipitation cycle in the summer, driven by convection triggered from sea- and bay-breeze fronts. These fronts act as a boundary between air masses with distinct thermodynamic and environmental characteristics. Convergence along these fronts and interactions between storm outflow and the fronts facilitate convection initiation in different mesoscale air masses. This study quantifies the heterogeneity among these air masses while investigating their influence on cloud microphysics. We find that the effect of airmass heterogeneity is more pronounced for the bulk microphysical properties in shallow clouds.

Sharma, Milind↗

Develop Direct 3D Building as a Transformational 3D Printing

Phase 1 of this project recognizes the key advantages of direct 3D building (3DB) by literature research, initial experiments, and analyses. The fundamental enhancement in powder density, layer thickness, and their uniformities are attributed to the independence from high blade speed and powder flowability. The increase in layer quality, before selective fusion, is found qualitatively significant for a step change in process robustness when the unrepeatability of 3D printing (3DP) remains a challenge in serial volume production. The reduced challenge of powder flowability should not only entail improvement in build quality but also reduce powder cost from the strict morphology and size specs. The concurrent selective fusion and powder surface preparation eliminate the need for frequent recoating pauses to increase build speed. On-going experiments include density cup measurements by X-ray scanning and recoating performance evaluation by a rotating disk system to verify some of the results.

42 ENGINEERING↗

Bottom-up design of actinide materials from molecular clusters: Demonstration of a general-purpose simulation capability leveraging machine-learned atomic potentials

Actinide thin-film coatings such as uranium dioxide (UO 2 ) play an important role in nuclear reactors and other mission-relevant applications, but realization of their potential requires a deep fundamental understanding of the chemical vapor deposition (CVD) processes used for their growth. The slow experimental progress can be attributed, in part, to the standard safety guidelines associated with handling uranium byproducts, which are often corrosive, toxic, and radioactive. Accurate simulation techniques, when used in concert with experiment, can improve laboratory safety, material durability, and deliverable timeframes. However, state-of-the-art computational methods are either insufficiently accurate or intractably expensive. To remedy this situation, in this project we suggested a machine-learning (ML) accelerated workflow for simulating molecular clustering toward deposition. As a benchmark test case, we considered molecular clustering in steam and assessed independent components of our workflow by comparing with measured thermodynamic properties of water. After analyzing each component individually and finding no fundamental barrier to realization of the workflow, we attempted to integrate the ML component, a Sandia-developed tool called FitSNAP. As this was the first application of FitSNAP to atoms and molecules in the gas phase at Sandia, the method required more fitting data than was originally anticipated. Systematic improvements were made by including in the fit data diatomic potentials, molecular single-bond-breaking curves, and symmetry-constrained intermolecular potentials. We concluded that our strategy provides a feasible pathway toward modeling CVD and related processes, but that extensive training data must be generated before it can be of practical use.

36 MATERIALS SCIENCE↗

Procedures for Assessing the Stability of Proposed Topological Materials

Here, we investigate the stability of MnPb 2 Bi 2 Te 6 (MPBT), which is predicted to be a magnetic topological insulator (TI), using density functional theory calculations. Our analysis includes various measures such as enthalpies of formation, Helmholtz free energies, defect formation energies, and dynamical stability. Our thermodynamic analysis shows that the phonon contribution to the energy gain from finite temperature is estimated to be less than 10 meV/atom, which may not be sufficient to stabilize MPBT at high temperatures, even with the most favorable reactions starting from binaries. While MPBT is generally robust against the formation of various defects, we find that the anti-site defect formation of MnPb is the most likely to occur, with a corresponding energy less than 60 meV. This can be attributed to the significant energy cost from compressive strain at the PbTe layer. Our findings suggest that MPBT is on the brink of stability in terms of thermodynamics and defect formation, underscoring the importance of conducting systematic analyses of the stability of proposed TIs, including MPBT, for their practical utilization. This study offers valuable insights into the design and synthesis of desirable magnetic TI materials with robust stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of Double Excitations in the Resonant Inelastic X-ray Scattering of Nitric Oxide

The nitrogen K-edge resonant inelastic X-ray scattering (RIXS) map of nitric oxide (NO) has been measured and simulated to provide a detailed analysis of the observed features. High-resolution experimental RIXS maps were collected using an in situ gas flow cell and a high-transmission soft X-ray spectrometer. Accurate descriptions of the ground, excited, and core-excited states are based upon restricted active space self-consistent-field calculations using second order multiconfigurational perturbation theory. The nitrogen K-edge RIXS map of NO shows a range of features that can be assigned to intermediate states arising from 1s → π* and 1s → Rydberg excitations; additional bands are attributed to doubly excited intermediate states comprising 1s → π* and π → π* excitations. These results provide a detailed picture of RIXS for an open-shell molecule and an extensive description of the core-excited electronic structure of NO, an important molecule in many chemical and biological processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lanthanum-based double perovskite nanoscale motifs as support media for the methanol oxidation reaction

In this report we have not only analyzed the performance of perovskite oxides as support media for the methanol oxidation reaction (MOR) but also examined the impact and significance of various reaction parameters on their synthesis. Specifically, we have generated (a) La 2 NiMnO 6 , LaMnO 3 , and LaNiO 3 nanocubes with average sizes of ~200 nm, in addition to a series of La 2 NiMnO 6 (b) nanocubes possessing average sizes of ~70 and 400 nm and (c) anisotropic nanorods characterized by average diameters of 40-50 nm. All of these samples, when used as supports for Pt nanoparticles, exhibited activities which were at least twice that measured for Pt/C. We have investigated and correlated the effect of varying perovskite (i) composition, (ii) size, and (iii) morphology upon the measured MOR activity. (i) The Ni-containing perovskites yielded generally higher performance metrics than LaMnO 3 alone, suggesting that the presence of Ni is favorable for MOR, a finding supported by a shift in the Pt d-band in XPS. (ii) MOR activity is enhanced as the perovskite size increases in magnitude, suggesting that a growth in the perovskite particle size enables favorable, synergistic metal–support interactions. (iii) A comparison of the nanorods and nanocubes of a similar diameter implied that the one-dimensional morphology achieved a greater activity, a finding which can be attributed not only to the anisotropic structure but also to a desirable surface structure. Overall, these data yield key insights into the tuning of metal–support interactions via rational control over the composition, size, and morphology of the underlying catalyst support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyamorphism in a solute-lean Al–Ce metallic glass

Polyamorphism discovered in lanthanide-rich metallic glasses (MGs) has been attributed to the electronic transition of the lanthanide element as a solvent element. In this work, we report that pressure-induced polyamorphism still exists in a Ce-poor Al 93 Ce 7 binary MG where the 4f electron element serves as a solute and solute–solute avoidance is expected. The polyamorphic transition, observed by in situ high-pressure synchrotron x-ray diffraction, is accompanied by a volume collapse of ~0.78% and occurs over a narrow pressure range from ~0.8 to ~1.8 GPa. Further synchrotron Ce L 3 -edge x-ray absorption spectroscopy measurements reveal that pressure-induced 4f electron delocalization underlies the polyamorphic transition. Molecular dynamics simulations confirm that the Ce atoms in the MG are completely isolated by the solvent Al atoms. This result demonstrates that 4f element-bearing alloys with extremely dilute concentrations can also exhibit polyamorphic states originating from electronic transitions, extending the compositional space of polyamorphism of MGs into very dilute regions. Our work suggests that tunable properties under compressive stress could be achieved in MGs by even minor doping of elements prone to electronic transitions.

36 MATERIALS SCIENCE↗

Measurement of $d^2 \sigma/d|\vec{q}|d E_{avail}$ and 2p2h contribution using charged current $\nu_\mu$ interactions in the NOvA Near Detector

This Thesis presents the analysis methods and measurement of the $d^2 \sigma/d|\vec{q}|d E_{avail}$-CC inclusive cross section that describes neutrino scattering in a predominantly hydrocarbon medium. Studies that are prerequisite for the analysis including, variable determinations, event selections, efficiency, purity determinations, and systematic uncertainty estimations, are summarized. Tests of the analysis are also detailed, and shown to reproduce the input distributions. The double-differential cross-section measurement provides the foundation for determination of the inclusive rate for the excess induced by 2p2h processes together with nuclear medium effects that are not described by the Fermi gas model. The methodology for the extraction of this rate, defined as the excess observed relative to the rate estimated for known single-nucleon interactions, is described in detail. The following new measurements are reported in this Thesis: (1) The $\nu_\mu-$CC inclusive double-differential cross section as a function of three-momentum transfer and available hadronic energy, for an average $E_\nu$ of 1.8 GeV, is obtained. The double-differential cross section value that obtains when the bin widths are taken to be the dimensions of the entire analysis domain, e.g. $0.2 \le |\vec{q}| \le 2.0 GeV/c$ and $0.0 \le E_{avail} \le 2.0$ GeV, is inclusive cross section is $(6.05 \pm 0.75)\times10^{-39}$ cm$^2$/GeV/GeV/$c$/nucleon. An event excess attributed to 2p2h-MEC processes is observed; most of the rate occurs in a contiguous phase space region $0.3 \le |\vec{q}| \le 1.0$ GeV$/c$ $0.0 \le E_{avail} \le 0.35$ GeV. This rate represents $12.0\pm 6.5\%$ of the observed CC inclusive cross section; its cross section ratio relative to CCQE scattering is estimated to be $44.3 \pm 23.9\%$.

Olson, Travis Grant↗

Novel Preprocessing Techniques for Enhancing Flowability of Miscanthus

Purpose-grown energy crops possess significant potential as promising feedstocks for biofuel and biochemical production. However, similar to other biomass feedstocks, their utilization has been hindered by handling and feeding challenges such as clogging and segregation, which prevent biorefineries from operating at full capacity. These challenges arise primarily due to particle attributes including irregular shape, high flexibility, and high compressibility, leading to interlocking, high compaction, and significant friction under stress consolidation. To enhance operational reliability, it is crucial to focus on preprocessing techniques to address these issues, alongside accurately characterizing the mechanical and physical properties and flow performance of these feedstocks. This study investigates novel preprocessing techniques, including pelletization and torrefaction, to fundamentally alter these particle attributes and improve flowability. Miscanthus, an herbaceous energy crop, was the primary focus of this study. Samples were processed using a Forest Concepts Crumbler rotary shear system and an oscillating multi-stack screen bed to achieve two nominal (baseline) particle sizes: 6mm and 2mm. The study evaluated the efficiency and energy consumption of size reduction, revealing that while 2mm particles required more energy, they exhibited better flowability and higher yield strength compared to 6mm particles. Shear and compression tests assessed the material's shear strength, internal friction, and elastic modulus, while wedge-shaped hopper tests measured the critical arching distance and mass flow rate. The results provide valuable insights into the mechanical properties and processing efficiency of Miscanthus, contributing to the development of a preprocessing framework that enhances energy efficiency and material flowability in bioenergy production. However, further preprocessing and development are required to optimize this framework fully.

09 - BIOMASS FUELS↗

Nanodomain Formation and Temperature-Dependent Diffusion in Deep Eutectic Solvents Revealed by Single-Molecule Tracking

Deep eutectic solvents (DESs) are typically regarded as homogeneous liquids; however, recent work shows that many exhibit nanoscale structural heterogeneity. Most studies attribute these nanoscale features to short-range chemical interactions. It is still unclear whether a long-range physical mechanism also plays a role. Here, in this study, we examined the nanoscale structure in two hydrophobic DESs, 1:3 tetrabutylammonium bromide: l-menthol (DES-butyl) and 1:3 tetraoctylammonium bromide: l-menthol (DES-octyl). The notation 1:3 represents the molar ratio of the hydrogen bond acceptors to hydrogen bond donors used in the synthesis of the DESs. Single-molecule tracking (SMT) coupled with maximum entropy method (MEM) analysis was used to measure the number of diffusion populations of a dilute concentration of an added fluorescent probe. The presence of more than one population of diffusion coefficients indicates the existence of multiple local environments for the fluorescent probe (i.e., nanoscale structures in the DES). DES-butyl showed a relatively narrow diffusion coefficient distribution centered at 0.55 μm 2 /s, whereas DES-octyl displayed two distinct diffusing populations at 20 °C, with diffusion coefficients of 0.12 μm 2 /s and 0.53 μm 2 /s for the slow and fast populations, respectively. As DES-octyl was heated, the slow-diffusing population steadily diminished and disappeared above ∼30 °C, indicating that the nanodomains present at lower temperatures collapse as the liquid becomes more thermodynamically mixed. This temperature-dependent homogenization is consistent with a physical mechanism of nanostructure formation, for example, liquid–liquid phase separation (LLPS), wherein the structure is not driven solely by specific chemical interactions. The SMT-MEM results suggest that a long-range physical mechanism is the most plausible origin of the measured nanoscale structure in DES-octyl.

Opare-Addo, Jemima [Ames Laboratory (AMES), Ames, ↗

Studying 𝜋 + ⁢𝜋 − photoproduction beyond Pomeron exchange

Forward photoproduction of 𝜋 + ⁢𝜋 − pairs with invariant mass of the order of 𝑚 𝜌 ∼770 MeV is traditionally attributed to Pomeron exchange. Based on a detailed analysis of the CEBAF Large Acceptance Spectrometer photoproduction data collected at photon energies below 4 GeV, it is shown from a study of the angular moments that the dynamics of two-pion photoproduction for |𝑡| ≳ 0.5 GeV 2 cannot be explained by Pomeron exchange alone. This motivates the development of a new theoretical model of two-pion photoproduction which incorporates both two-pion and pion-nucleon resonant contributions. After fitting free parameters, the model provides an excellent description of the low moments of the angular distribution measured at CLAS and enables an assessment of the relative contributions of particular production mechanisms and an interpretation of the various features of the data in terms of these mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗