Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “apparent size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Large-scale features of the sun at 20 centimeter wavelength

Results are reported from an experimental study of the characteristics of large-scale coronal structures such as active regions, plages, filaments, and coronal holes using data obtained with the VLA at 1.5 GHz during the period September 11-17, 1988. The radio data were supplemented with He 10830- A, H-alpha, and Calcium-K spectroheliograms. A statistical analysis of some of the characteristics of the active regions is performed. Most of the active region sources were found to be about 100 arcsec in size, with bridges between regions common; lower brightness temperature regions showed a higher degree of polarization in general. The maximum polarization was found at the edge of active regions but well within the associated plages. The degree of polarization from bright active regions was small (not more than 20 percent), in agreement with previous results. Evidence was found for compression of preexisting flux by the emerging flux from a new region, which took place in the apparent absence of magnetic reconnection.

Gopalswamy, N.↗

Energetic mass outflows from young stars

Winds from low-mass optically visible T Tauri stars are investigated. It is shown that the presence of energetic T Tauri winds is coupled with the presence of solar-system-sized circumstellar disks which are optically thick in their inner regions. It is likely that these disks are in a state of mass accretion, and the source for the T Tauri winds probably derives from the innermost region of the accretion disk. It is suggested that energetic T Tauri winds are unlikely to be the primary agents in the final clearing of gas and other debris in forming planetary systems, as the cessation of energetic winds apparently coincides with the cessation of inner disk accretion. It is argued that energetic winds from both embedded IR sources and T Tauri stars share a common origin.

Edwards, Suzan↗

Relaxation mechanisms in a disordered system with Poisson-level statistics

Here we discuss the interplay between many-body localization and spin symmetry. To this end, we study the time evolution of several observables in the anisotropic t- j model. Like the Hubbard chain, the studied model contains charge and spin degrees of freedom, yet it has smaller Hilbert space and thus allows for numerical studies of larger systems. We compare the field disorder that breaks the $\mathbb{Z}_2$ spin symmetry and a potential disorder that preserves the latter symmetry. In the former case, sufficiently strong disorder leads to localization of all studied observables, at least for the studied system sizes. However, in the case of symmetry-preserving disorder, we observe that odd operators under the $\mathbb{Z}_2$ spin transformation relax towards the equilibrium value at relatively short timescales that grow only polynomially with the disorder strength. On the other hand, the dynamics of even operators and the level statistics within each symmetry sector are consistent with localization. Our results indicate that localization exists within each symmetry sector for symmetry-preserving disorder. Odd operators' apparent relaxation is due to their time evolution between distinct symmetry sectors.

36 MATERIALS SCIENCE↗

Passivation of pigment particles for thermal control coatings

Five powders were received for plasma calcining during this report period. The particle size using a fluid energy mill, and obtained pigments that could be plasma calcined. Optimum results are obtained in the plasma calcining of zinc orthotitanate when finely dispersed particles are subjected to a calculated plasma temperature of 1670 C. Increasing the plasma calcining time by using multiple passes through the plasma stabilized the pigment to vacuum UV irradiation was evidenced by the resulting ESR spectra but slightly decreased the whiteness of the pigment. The observed darkening is apparently associated with the formation of Ti(+3) color centers.

Farley, E. P.↗

Characteristics of moving visual scenes influencing spatial orientation

A visual display rotating in a frontal plane induces effects equivalent to a change in the apparent direction of gravity. Magnitude of visual tilt was measured as a function of time from onset of rotation, velocity of rotation, and area and retinal location of the stimulating field. The mejor part of the tilt occurs within 30 sec from onset of stimulation. It increases with angular velocity, but independently of area and location of field, up to about 30 to 40 deg of rotation per sec and then levels off. Tilt increases with field size but the effect of thin ring-fields increases with retinal eccentricity. The interaction of visual and nonvisual determinants of the induced effects is discussed.

Held, R.↗

An Air Revitalization Model (ARM) for Regenerative Life Support Systems (RLSS)

The primary objective of the air revitalization model (ARM) is to determine the minimum buffer capacities that would be necessary for long duration space missions. Several observations are supported by the current configuration sizes: the baseline values for each gas and the day to day or month to month fluctuations that are allowed. The baseline values depend on the minimum safety tolerances and the quantities of life support consumables necessary to survive the worst case scenarios within those tolerances. Most, it not all, of these quantities can easily be determined by ARM once these tolerances are set. The day to day fluctuations also require a command decision. It is already apparent from the current configuration of ARM that the tighter these fluctuations are controlled, the more energy used, the more nonregenerable hydrazine consumed, and the larger the required capacities for the various gas generators. All of these relationships could clearly be quantified by one operational ARM.

Hart, Maxwell M.↗

Determination of the phase diagram of the electron doped superconductor Ba(Fe1-xCox)2As2

Systematic measurements of the resistivity, heat capacity, susceptibility and Hall coefficient are presented for single crystal samples of the electron-doped superconductor Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2}. These data delineate an x-T phase diagram in which the single magnetic/structural phase transition that is observed for undoped BaFe{sub 2}As{sub 2} at 134 K apparently splits into two distinct phase transitions, both of which are rapidly suppressed with increasing Co concentration. Superconductivity emerges for Co concentrations above x {approx}0.025, and appears to coexist with the broken symmetry state for an appreciable range of doping, up to x {approx} 0.06. The optimal superconducting transition temperature appears to coincide with the Co concentration at which the magnetic/structural phase transitions are totally suppressed, at least within the resolution provided by the finite step size between crystals prepared with different doping levels. Superconductivity is observed for a further range of Co concentrations, before being completely suppressed for x {approx} 0.018 and above. The form of this x-T phase diagram is suggestive of an association between superconductivity and a quantum critical point arising from suppression of the magnetic and/or structural phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comparison of the photocatalytic activity of six tunneled titanates

The photocatalytic behavior of six tunneled titanates—Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, K{sub 1}Ga{sub 17}Ti{sub 15}O{sub 56}, K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16}, and BaTi{sub 4}O{sub 9}—was investigated using methylene blue as an indicator and a xenon arc lamp as the radiation source. Powders prepared by solid state reaction had surface areas ranging from 0.40 to 1.58 m{sup 2}/g and particle sizes ranging from 1 to 25 μm. Bandgaps, as measured from diffuse reflectance data, ranged from 2.84 to 4.15 eV. Two of the tunneled titanates—Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—exhibited negligible photocatalytic activity. The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other, exhibiting apparent first-order reaction rates of 0.275 to 0.31 h{sup −1} using 100 mg of powder in 125 ml of 20 μM methylene blue at room temperature. The BaTi{sub 4}O{sub 9} sample exhibited the highest photocatalytic activity with an apparent first-order reaction rate of 0.53 h{sup −1} under the same conditions. The addition of a RuO{sub 2} co-catalyst improved the photocatalytic activity of Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, decreased the activity of BaTi{sub 4}O{sub 9}, and had little effect on the activity of the other powders. A comparison of the structural features in the six materials shows that photocatalytic activity is strongly related to the density of TiO{sub 6} octahedra in the different crystal structures. Among the gallium-containing tunneled titanates, photocatalytic activity increased with decreasing band gap. - Graphical abstract: Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—One of the tunneled titanates investigated. Highlights: ► The photocatalytic activity of six tunneled titanates was compared. ► Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8} exhibited negligible photocatalytic activity. ► The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other. ► BaTi{sub 4}O{sub 9} exhibited the highest photocatalytic activity. ► Photocatalytic activity is related to the density of TiO{sub 6} octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

POSSIBLE DISINTEGRATING SHORT-PERIOD SUPER-MERCURY ORBITING KIC 12557548

We report on the discovery of stellar occultations, observed with Kepler, which recur periodically at 15.685 hr intervals, but which vary in depth from a maximum of 1.3% to a minimum that can be less than 0.2%. The star that is apparently being occulted is KIC 12557548, a V = 16 mag K dwarf with T{sub eff,s} {approx_equal} 4400 K. The out-of-occultation behavior shows no evidence for ellipsoidal light variations, indicating that the mass of the orbiting object is less than {approx}3 M{sub J} (for an orbital period of 15.7 hr). Because the eclipse depths are highly variable, they cannot be due solely to transits of a single planet with a fixed size. We discuss but dismiss a scenario involving a binary giant planet whose mutual orbit plane precesses, bringing one of the planets into and out of a grazing transit. This scenario seems ruled out by the dynamical instability that would result from such a configuration. We also briefly consider an eclipsing binary, possibly containing an accretion disk, that either orbits KIC 12557548 in a hierarchical triple configuration or is nearby on the sky, but we find such a scenario inadequate to reproduce the observations. The much more likely explanation-but one which still requires more quantitative development-involves macroscopic particles escaping the atmosphere of a slowly disintegrating planet not much larger than Mercury in size. The particles could take the form of micron-sized pyroxene or aluminum oxide dust grains. The planetary surface is hot enough to sublimate and create a high-Z atmosphere; this atmosphere may be loaded with dust via cloud condensation or explosive volcanism. Atmospheric gas escapes the planet via a Parker-type thermal wind, dragging dust grains with it. We infer a mass-loss rate from the observations of order 1 M{sub Circled-Plus} Gyr{sup -1}, with a dust-to-gas ratio possibly of order unity. For our fiducial 0.1 M{sub Circled-Plus} planet (twice the mass of Mercury), the evaporation timescale may be {approx}0.2 Gyr. Smaller mass planets are disfavored because they evaporate still more quickly, as are larger mass planets because they have surface gravities too strong to sustain outflows with the requisite mass-loss rates. The occultation profile evinces an ingress-egress asymmetry that could reflect a comet-like dust tail trailing the planet; we present simulations of such a tail.

79 ASTRONOMY AND ASTROPHYSICS↗

High-temperature oxidation behavior of the SiC layer of TRISO particles in low-pressure oxygen

Surrogate tristructural-isotropic (TRISO)-coated fuel particles were oxidized in 0.2 kPa O 2 at 1200–1600°C to examine the behavior of the SiC layer and understand the mechanisms. The thickness and microstructure of the resultant SiO 2 layers were analyzed using scanning electron microscopy, focused ion beam, and transmission electron microscopy. The majority of the surface comprised smooth, amorphous SiO 2 with a constant thickness indicative of passive oxidation. The apparent activation energy for oxide growth was 188 ± 8 kJ/mol and consistent across all temperatures in 0.2 kPa O 2 . The relationship between activation energy and oxidation mechanism is discussed. Raised nodules of porous, crystalline SiO 2 were dispersed across the surface, suggesting that active oxidation and redeposition occurred in those locations. These nodules were correlated with clusters of nanocrystalline SiC grains, which may facilitate active oxidation. So these findings suggest that microstructural inhomogeneities such as irregular grain size influence the oxidation response of the SiC layer of TRISO particles and may influence their accident tolerance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Atomic-scale structure of ZrO 2 : Formation of metastable polymorphs

Metastable phases can exist within local minima in the potential energy landscape when they are kinetically “trapped” by various processing routes, such as thermal treatment, grain size reduction, chemical doping, interfacial stress, or irradiation. Despite the importance of metastable materials for many technological applications, little is known about the underlying structural mechanisms of the stabilization process and atomic-scale nature of the resulting defective metastable phase. Investigating ion-irradiated and nanocrystalline zirconia with neutron total scattering experiments, we show that metastable tetragonal ZrO 2 consists of an underlying structure of ferroelastic, orthorhombic nanoscale domains stabilized by a network of domain walls. The apparent long-range tetragonal structure that can be recovered to ambient conditions is only the configurational ensemble average of the underlying orthorhombic domains. This structural heterogeneity with a distinct short-range order is more broadly applicable to other nonequilibrium materials and provides insight into the synthesis and recovery of functional metastable phases with unique physical and chemical properties.

74 ATOMIC AND MOLECULAR PHYSICS↗

A new concept for airship mooring and ground handling

Calculations were made to determine the feasibility of applying the negative air cushion (NAC) principle to the mooring of airships. Pressures required for the inflation of the flexible trunks are not excessive and the maintenance of sufficient hold down force is possible in winds up to 50 knots. Fabric strength requirements for a typical NAC sized for a 10-million cubic foot airship were found to be approximately 200 lbs./in. Corresponding power requirements range between 66-HP and 5600-HP. No consideration was given to the internal airship loads caused by the use of a NAC and further analysis in much greater detail is required before this method could be applied to an actual design, however, the basic concept appears to be sound and no problem areas of a fundamental nature are apparent.

Vaughan, J. C.↗

The Role of Comprehensive Detailed Chemical Kinetic Reaction Mechanisms in Combustion Research

Recent developments by the authors in the field of comprehensive detailed chemical kinetic reaction mechanisms for hydrocarbon fuels are reviewed. Examples are given of how these mechanisms provide fundamental chemical insights into a range of combustion applications. Practical combustion consists primarily of chemical heat release from reactions between a fuel and an oxidizer, and computer simulations of practical combustion systems have become an essential tool of combustion research (Westbrook et al., 2005). At the heart of most combustion simulations, the chemical kinetic submodel frequently is the most detailed, complex and computationally costly part of a system model. Historically, the chemical submodel equations are solved using time-implicit numerical algorithms, due to the extreme stiffness of the coupled rate equations, with a computational cost that varies roughly with the cube of the number of chemical species in the model. While early mechanisms (c. 1980) for apparently simple fuels such as methane (Warnatz, 1980) or methanol (Westbrook and Dryer, 1979) included perhaps 25 species, current detailed mechanisms for much larger, more complex fuels such as hexadecane (Fournet et al., 2001; Ristori et al., 2001; Westbrook et al., 2008) or methyl ester methyl decanoate (Herbinet et al., 2008) have as many as 2000 or even 3000 species. Rapid growth in capabilities of modern computers has been an essential feature in this rapid growth in the size and complexity of chemical kinetic reaction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biofilm monitoring using complex permittivity.

There is strong interest in the detection and monitoring of bio-fouling. Bio-fouling problems are common in numerous water treatments systems, medical and dental apparatus and food processing equipment. Current bio-fouling control protocols are time consuming and costly. New early detection techniques to monitor bio-forming contaminates are means to enhanced efficiency. Understanding the unique dielectric properties of biofilm development, colony forming bacteria and nutrient background will provide a basis to the effectiveness of controlling or preventing biofilm growth. Dielectric spectroscopy measurements provide values of complex permittivity, {var_epsilon}*, of biofilm formation by applying a weak alternating electric field at various frequencies. The dielectric characteristic of the biofilm, {var_epsilon}{prime}, is the real component of {var_epsilon}* and measures the biofilm's unique ability to store energy. Graphically observed dependencies of {var_epsilon}{prime} to frequency indicate dielectric relaxation or dielectric dispersion behaviors that mark the particular stage of progression during the development of biofilms. In contrast, any frequency dependency of the imaginary component, {var_epsilon}{double_prime} the loss factor, is expressed as dielectric losses from the biofilm due to dipole relaxation. The tangent angle of these two component vectors is the ratio of the imaginary component to the real component, {var_epsilon}{double_prime}/{var_epsilon}{prime} and is referred to as the loss angle tangent (tan {delta}) or dielectric loss. Changes in tan {delta} are characteristic of changes in dielectric losses during various developmental stages of the films. Permittivity scans in the above figure are of biofilm growth from P. Fluorescens (10e7 CFU's at the start). Three trends are apparent from these scans, the first being a small drop in the imaginary permittivity over a 7 hours period, best seen in the Cole-Cole plot (a). The second trend is observed two hours after inoculation when the permittivity begins to increase slightly over the next 20 hours, best seen in the shift from 1000 Hz to 5000 Hz in tan {delta} at the high frequencies (c). Because of similar dielectric relaxation properties noted by the comparable size of the semicircles, plot (a), and the height of tan {delta}, plot (c), within the first 29 hours, cell activity levels did not appreciably change. The third trend is observed when the complex permittivity value drops by orders of magnitude between 29 hours and 37 hours, best seen in the log [E] plot (b), and in the drop of the dielectric loss, tan {delta}, to 0. This change in the dielectric properties in the bio environment is nearly independent of all frequencies (c) and dissimilar from the original condition when only bacteria and nutrient was present in the biofilm chambers. The semicircles in plot (a) for this period decreased below the resolution of the graph, implying a large difference in the dielectric behavior of the cells/biofilms consisting of low dielectric losses. We believe these large changes are related to the on-set of biofilms.

36 MATERIALS SCIENCE↗

Environmental flows in the context of unconventional natural gas development in the Marcellus Shale

Quantitative flow-ecology relationships are needed to evaluate how water withdrawals for unconventional natural gas development may impact aquatic ecosystems. Addressing this need, we studied current patterns of hydrologic alteration in the Marcellus Shale region and related the estimated flow alteration to fish community measures. We then used these empirical flow-ecology relationships to evaluate alternative surface water withdrawals and environmental flow rules. Reduced high-flow magnitude, dampened rates of change, and increased low-flow magnitudes were apparent regionally, but changes in many of the flow metrics likely to be sensitive to withdrawals also showed substantial regional variation. Fish community measures were significantly related to flow alteration, including declines in species richness with diminished annual runoff, winter low-flow, and summer median-flow. In addition, the relative abundance of intolerant taxa decreased with reduced winter high-flow and increased flow constancy, while fluvial specialist species decreased with reduced winter and annual flows. Stream size strongly mediated both the impact of withdrawal scenarios and the protection afforded by environmental flow standards. Under the most intense withdrawal scenario, 75% of reference headwaters and creeks (drainage areas <99 km 2 ) experienced at least 78% reduction in summer flow, whereas little change was predicted for larger rivers. Moreover, the least intense withdrawal scenario still reduced summer flows by at least 21% for 50% of headwaters and creeks. The observed 90th quantile flow-ecology relationships indicate that such alteration could reduce species richness by 23% or more. Seasonally varying environmental flow standards and high fixed minimum flows protected the most streams from hydrologic alteration, but common minimum flow standards left numerous locations vulnerable to substantial flow alteration. This study clarifies how additional water demands in the region may adversely affect freshwater biological integrity. Furthermore, the results make clear that policies to limit or prevent water withdrawals from smaller streams can reduce the risk of ecosystem impairment.

54 ENVIRONMENTAL SCIENCES↗

750 GeV diphotons: implications for supersymmetric unification II

Perturbative supersymmetric gauge coupling unification is possible in six theories where complete SU (5) TeV-scale multiplets of vector matter account for the size of the reported 750 GeV diphoton resonance, interpreted as a singlet multiplet S=(s+ia)/√2. One of these has a full generation of vector matter and a unified gauge coupling αG ~ 1. The diphoton signal rate is enhanced by loops of vector squarks and sleptons, especially when the trilinear A couplings are large. If the SH u H d coupling is absent, both s and a can contribute to the resonance, which may then have a large apparent width if the mass splitting from s and a arises from loops of vector matter. The width depends sensitively on A parameters and phases of the vector squark and slepton masses. Vector quarks and/or squarks are expected to be in reach of the LHC. If the SH u H d coupling is present, a leads to a narrow diphoton resonance, while a second resonance with decays s → hh, W + W – , ZZ is likely to be discovered at future LHC runs. In some of the theories a non-standard origin or running of the soft parameters is required, for example involving conformal hidden sector interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Localization of Oxygen Interstitials in CeSrGa 3 O 7+δ Melilite

The solubility of Ce in the La1–xCexSrGa3O7+δ and La1.54–xCexSr0.46Ga3O7.27+δ melilites was investigated, along with the thermal redox stability in air of these melilites and the conductivity variation associated with oxidization of Ce3+ into Ce4+. Under CO reducing atmosphere, the La in LaSrGa3O7 may be completely substituted by Ce to form the La1–xCexSrGa3O7+δ solid solution, which is stable in air to ~600 °C when x ≥ 0.6. On the other side, the La1.54–xCexSr0.46Ga3O7.27+δ compositions displayed much lower Ce solubility (x ≤ 0.1), irrespective of the synthesis atmosphere. In the as-made La1–xCexSrGa3O7+δ, the conductivity increased with the cerium content, due to the enhanced electronic conduction arising from the 4f electrons in Ce3+ cations. At 600 °C, CeSrGa3O7+δ showed a conductivity of ~10–4 S/cm in air, nearly 4 orders of magnitude higher than that of LaSrGa3O7. The oxidation of Ce3+ into Ce4+ in CeSrGa3O7+δ slightly reduced the conductivity, and the oxygen excess did not result in apparent increase of oxide ion conduction in CeSrGa3O7+δ. The Ce doping in air also reduced the interstitial oxide ion conductivity of La1.54Sr0.46Ga3O7.27. Neutron powder diffraction study on CeSrGa3O7.39 composition revealed that the extra oxygen is incorporated in the four-linked GaO4 polyhedral environment, leading to distorted GaO5 trigonal bipyramid. The stabilization and low mobility of interstitial oxygen atoms in CeSrGa3O7+δ, in contrast with those in La1+xSr1–xGa3O7+0.5x, may be correlated with the cationic size contraction from the oxidation of Ce3+ to Ce4+. These results provide a new comprehensive understanding of the accommodation and conduction mechanism of the oxygen interstitials in the melilite structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combinatorial Insights into Doping Control and Transport Properties of Zinc Tin Nitride

ZnSnN 2 is an Earth-abundant semiconductor analogous to the III–nitrides with potential as a solar absorber due to its direct bandgap, steep absorption onset, and disorder-driven bandgap tunability. Despite these desirable properties, discrepancies in the fundamental bandgap and degenerate n-type carrier density have been prevalent issues in the limited amount of literature available on this material. We we use a combinatorial RF co-sputtering approach, we explored a growth-temperature-composition space for Zn 1+x Sn 1-x N 2 over the ranges 35–340 °C and 0.30–0.75 Zn/(Zn + Sn). In this way, we identified an optimal set of deposition parameters for obtaining as-deposited films with wurtzite crystal structure and carrier density as low as 1.8 × 10 18 cm -3 . Films grown at 230 °C with Zn/(Zn + Sn) = 0.60 were found to have the largest grain size overall (70 nm diameter on average) while also exhibiting low carrier density (3 × 10 18 cm -3 ) and high mobility (8.3 cm 2 V -1 s -1 ). Using this approach, we establish the direct bandgap of cation-disordered ZnSnN 2 at 1.0 eV. Moreover, we report tunable carrier density as a function of cation composition, in which lower carrier density is observed for higher Zn content. Consequently, this relationship manifests as a Burstein–Moss shift widening the apparent bandgap as cation composition moves away from Zn-rich. Collectively, these findings provide important insight into the fundamental properties of the Zn–Sn–N material system and highlight the potential to utilize ZnSnN 2 for photovoltaics.

14 SOLAR ENERGY↗