Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analyses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Inelastic and Dynamic Fracture and Stress Analyses

Large deformation inelastic stress analysis and inelastic and dynamic crack propagation research work is summarized. The salient topics of interest in engine structure analysis that are discussed herein include: (1) a path-independent integral (T) in inelastic fracture mechanics, (2) analysis of dynamic crack propagation, (3) generalization of constitutive relations of inelasticity for finite deformations , (4) complementary energy approaches in inelastic analyses, and (5) objectivity of time integration schemes in inelastic stress analysis.

Atluri, S. N.↗

Radar analyses of mesoscale meteorological phenomena during the AVE/VAS correlation field experiment

Radar data were collected during the selected critical times of the field experiment and subsequently analyzed for specific items. The analyses of the radar data for the AVE/VAS experiment provided statistically significant values for each of the 10 Km by 10 Km grids within radar range. The resulting information for correlation with satellite data included the following derived items that were averaged for each grid area: (1) rainfall rate in mm/hr; (2) dBZ (reflectivity) values; (3) accumulated rainfall values per hour; (4) accumulated rainfall values for a 6-hour period; (5) vertically integrated liquid water content per square meter; and (6) vertical height of the radar axis at the midpoint of each grid. Additional products derived from radar data are being investigated. An example of one such product is the derivation of the errors in integrated rainfall with different sampling periods. This is of significance for correlation with satellite data in that normally a step-function type of rainfall rate is used to derive the total rainfall over a period.

Huebner, G. L.↗

Inelastic stress analyses at finite deformation through complementary energy approaches

A new hybrid-stress finite element algorithm, suitable for analyses of large, quasistatic, inelastic deformations, is presented. The algorithm is based upon a generalization of de Veubeke's (1972) complementary energy principle. The principal variables in the formulation are the nominal stress rate and spin, and the resulting finite element equations are discrete versions of the equations of compatibility and angular momentum balance. The algorithm produces true rates, time derivatives, as opposed to 'increments'. There results a boundary value problem (for stress rate and velocity) and an initial value problem (for total stress and deformation). A discussion of the numerical treatment of the boundary value problem is followed by a detailed examination of the numerical treatment of the initial value problem, covering the topics of efficiency, stability, and objectivity. The paper is closed with a set of examples, finite homogeneous deformation problems, which serve to bring out important aspects of the algorithm.

Atluri, S. N.↗

Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm

A new hybrid-stress finite element algorithm, suitable for analyses of large, quasistatic, inelastic deformations, is presented. The algorithm is base upon a generalization of de Veubeke's complementary energy principle. The principal variables in the formulation are the nominal stress rate and spin, and thg resulting finite element equations are discrete versions of the equations of compatibility and angular momentum balance. The algorithm produces true rates, time derivatives, as opposed to 'increments'. There results a complete separation of the boundary value problem (for stress rate and velocity) and the initial value problem (for total stress and deformation); hence, their numerical treatments are essentially independent. After a fairly comprehensive discussion of the numerical treatment of the boundary value problem, we launch into a detailed examination of the numerical treatment of the initial value problem, covering the topics of efficiency, stability and objectivity. The paper is closed with a set of examples, finite homogeneous deformation problems, which serve to bring out important aspects of the algorithm.

Reed, K. W.↗

Comparison between measured turbine stage performance and the predicted performance using quasi-3D flow and boundary layer analyses

A method for calculating turbine stage performance is described. The usefulness of the method is demonstrated by comparing measured and predicted efficiencies for nine different stages. Comparisons are made over a range of turbine pressure ratios and rotor speeds. A quasi-3D flow analysis is used to account for complex passage geometries. Boundary layer analyses are done to account for losses due to friction. Empirical loss models are used to account for incidence, secondary flow, disc windage, and clearance losses. Previously announced in STAR as N84-22564

Boyle, R. J.↗

Radiometric analyses of Landsat-4 digital image data

The results of analyses of the radiometric characteristics of digital image data produced by the Landsat 4 MSS and TM sensors are reviewed. The MSS analysis found high quality data comparable to the products of previous Landsats, except for a low-level coherent noise effect having a magnitude of about 0.5 counts in each band and a spatial period of about 3.6 pixels. The TM analysis found excellent spatial resolution, generally high data quality and expected scan-angle effects. Procedures for equalizing detector responses appear to be working as intended. Two low-amplitude artifacts also were discovered. The first is associated with the direction of scan (TM employs bidirectional scanning). The second, a very low employs bidirectional scanning). The second, a very low frequency level-shift artifact which produces image banding that is most pronounced in TM1, could be a serious problem for water-related applications or others where average signal levels are low. Correction procedures are under investigation.

Malila, W. A.↗

Geomorphic analyses from space imagery

One of the most obvious applications of space imagery to geomorphological analyses is in the study of drainage patterns and channel networks. LANDSAT, high altitude photography and other types of remote sensing imagery are excellent for depicting stream networks on a regional scale because of their broad coverage in a single image. They offer a valuable tool for comparing and analyzing drainage patterns and channel networks all over the world. Three aspects considered in this geomorphological study are: (1) the origin, evolution and rates of development of drainage systems; (2) the topological studies of network and channel arrangements; and (3) the adjustment of streams to tectonic events and geologic structure (i.e., the mode and rate of adjustment).

Morisawa, M.↗

Structure function analyses of mesoscale VAS retrievals

Structure function analyses are used for a comparison of two VAS retrieval procedures, one obtained using a physical inversion technique and the other from a linear regression technique. Results from both procedures are evaluated and compared with those from a special mesoscale network of radiosonde stations, operated during March 6, 7, 1982 as part of the AVE-VAS field experiment. It is shown that both types of VAS retrievals underestimate the magnitudes of mean nondirectional gradients that are detected by the mesoscale radiosonde network. This result is expected since the VAS provides a volumetric sample of the atmosphere.

Meyer, P. J.↗

Error analyses for a gravity gradiometer mission

This paper addresses the usefulness of an orbiting gravity gradiometer as a sensor for mapping the fine structure of the earth gravity field. The exact knowledge of this field is essential for studies of the solid earth and the dynamics of the oceans. Although the earth gravity tensor, measured by a gradiometer assembly, has nine components, only five components are independent. This latter fact is as a consequence of the symmetry and conservative nature of the earth's gravity field. The most dominant component is the radial one. The error analyses considered here are therefore based only upon a single axis gradiometer sensing this radial component. The expected global gravity and geoid errors for a 50 x 50-km (1/2 x 1/2 deg) area utilizing a spaceborne gradiometer with a precision of 0.001 EU in a 160-km circular polar orbit are about 3 mGAL and 5 cm, respectively.

Kahn, W. D.↗

Long life nickel electrodes for a nickel-hydrogen cell. III - Results of an accelerated test and failure analyses

Nineteen different designs of nickel electrodes were tested in Ni/H2 boiler plate cells in an accelerated low earth orbit cycle regime to the end of their life. The failure analyses of these cells showed that the major performance changes due to the cycling was a severe reduction of their high rate discharge capability rather than an absolute capacity reduction. Many physical changes of the nickel electrodes were observed after the cycling test. These changes include dimensional expansion, sinter rupture, loose black powdering of the active material, morphology changes, active material migration, increase of pore volume, change of pore distribution, and increase of surface area. All of these were caused by active material expansion with cycling. Among these changes, the morphology change which involves migration of active material away from the current collecting nickel sinter appears to be that most responsible for the reduction of the rate capability.

Lim, H. S.↗

Advanced vehicle systems assessment. Volume 4: Supporting analyses

Volume 4 (Supporting Analyses) is part of a five-volume report, Advanced Vehicle Systems Assessment. Thirty-nine individuals, knowledgeable in advanced technology, were interviewed to obtain their preferences. Rankings were calculated for the eight groups they represented, using multiplicative and additive utility models. The four topics for consideration were: (1) preferred range for various battery technologies; (2) preferred battery technology for each of a variety of travel ranges; (3) most promising battery technology, vehicle range combination; and (4) comparison of the most preferred electric vehicle with the methanol-fuled, spark-ignition engine vehicle and with the most preferred of the hybrid vehicles.

Hardy, K.↗

Objective analysis and assimilation techniques used for the production of FGGE 3b analyses

A system of seven tables, which cover analysis archiving, observation types, quality control, data assimilation cycles, assimilating models, initialization, and analysis techniques was adopted. The set of prepared tables allows side-by-side comparison of the characteristics of the six data assimilation systems (European Center for Medium Range Weather Forecasts, Geophysical Fluid Dynamics Laboratory, Goddard Laboratory for Atmospheric Science, National Meteorological Center, Florida State University, and Naval Environmental Prediction Research Facility) used to produce FGGE IIIb analyses.

Daley, R. W.↗

Some comparison of ECMWF 3b and GFDL 3b analyses in the tropics

Owing to the problems that data assimilation procedures have in analyzing data in the tropics and to the apparent differences in the descriptions of the European Center for Medium Range Weather Forecasts (ECMWF) and Geophysical Fluid Dynamics Laboratory (GFDL) assimilation suites, a brief comparison was done of the resulting analyses in the tropics. Three cases each were selected for Standard Operating Procedures 1 and 2 at the 200 and 850 mb levels, the wind fields for 25 deg N 25 deg S were partitioned into a rotational and divergent component, and various statistics of each were calculated.

Julian, P. R.↗

Dynamic and aeroelastic analyses of turbosystems in NASTRAN

Several new capabilities dealing with the dynamic and aeroelastic analyses of turbosystems have been added as standard features to the April 1986 release of NASTRAN. A brief description is given of these capabilities and their implementation in NASTRAN are outlined.

Elchuri, V.↗

Helicopter tail rotor noise analyses

A study was made of helicopter tail rotor noise, particularly that due to interactions with the main rotor tip vortices, and with the fuselage separation mean wake. The tail rotor blade-main rotor tip vortex interaction is modelled as an airfoil of infinite span cutting through a moving vortex. The vortex and the geometry information required by the analyses are obtained through a free wake geometry analysis of the main rotor. The acoustic pressure-time histories for the tail rotor blade-vortex interactions are then calculated. These acoustic results are compared to tail rotor loading and thickness noise, and are found to be significant to the overall tail rotor noise generation. Under most helicopter operating conditions, large acoustic pressure fluctuations can be generated due to a series of skewed main rotor tip vortices passing through the tail rotor disk. The noise generation depends strongly upon the helicopter operating conditions and the location of the tail rotor relative to the main rotor.

George, A. R.↗

Aircraft drag prediction and reduction. Addendum 1: Computational drag analyses and minimization; mission impossible?

The Special Course on Aircraft Drag Prediction was sponsored by the AGARD Fluid Dynamics Panel and the von Karman Institute and presented at the von Karman Institute, Rhode-Saint-Genese, Belgium, on 20 to 23 May 1985 and at the NASA Langley Research Center, Hampton, Virginia, USA, 5 to 6 August 1985. The course began with a general review of drag reduction technology. Then the possibility of reduction of skin friction through control of laminar flow and through modification of the structure of the turbulence in the boundary layer were discussed. Methods for predicting and reducing the drag of external stores, of nacelles, of fuselage protuberances, and of fuselage afterbodies were then presented followed by discussion of transonic drag rise. The prediction of viscous and wave drag by a method matching inviscid flow calculations and boundary layer integral calculations, and the reduction of transonic drag through boundary layer control are also discussed. This volume comprises Paper No. 9 Computational Drag Analyses and Minimization: Mission Impossible, which was not included in AGARD Report 723 (main volume).

Slooff, J. W.↗

Optical region elemental abundance analyses of B and A stars. V - The normal stars Theta Leonis, Tau Herculis, 14 Cygni, and 5 Aquarii

Abundance analyses using optical region data and fully line-blanketed model atmospheres have been performed for four sharp-lined normal B and A type stars. The microturbulent velocities of all the stars are found to follow the same relation with temperature. Some of the stars studied in this paper are found to have one or two anomalous abundances, such as the zirconium abundance of Theta Leo.

Adelman, S. J.↗

Computer aided derivation of equations for composite mechanics problems and finite element analyses

Explicit equations are derived for analysis of multilayered fiber composites and for finite element analyses. The equations are obtained using a symbolic program and tested for various composite properties as well as for different fiber orientations. In order to analyze multilayered fiber composite structures, a variable thickness finite element is formulated. Examples of an airfoil geometry, simulated in a form of a cantilevered beam with various fiber orientations are studied.

Sarigul, N.↗